Search models, users, collections, and posts
Bio
Hi there! I’m Leaf, a passionate 3D printing and CAD hobbyist dedicated to creating high-quality, reliable models. I love sharing ideas and connecting with fellow makers on MakerWorld, and I’m always open to constructive feedback to keep improving. Thanks for stopping by my channel!
-Leaf
Achievements
MakerWorld Guardian
Active more than 20 days out of last 30 days UTC time
Strawberry season never ends when you have one of these little guys on your keychain! It prints in three vibrant colors. Red, green, and yellow. With no assembly or post-processing needed, and no supports to annoy you, just pull your print off the bed and clip it onto any keychain you want! The shape and details come out clean and crisp straight from the printer. Give it a like if you want to see more fruit-inspired designs! Merry strawberry picking!
-Leaf
Strawberry Keychain - High and Low Detail Versions
0
2
Share
0
0
0
Well boys, we've done it again.
I just ordered the Bambu Lab H2D Combo Pack with AMS Pro2 and AMS HT. I MIGHT have included two of every high flow tungsten carbide nozzle... 0.4, 0.6, and 0.8. As well as two 0.2 stainless steel standard flow for high detail. And a 0.8 standard flow stainless steel that I'm planning on drilling out for some small scale injection molding.. Wish me (and my wallet) luck in our future 3d printing endeavors!!
-Leaf
Share
0
0
0
If you had been following my channel closely enough to see this post a couple days ago... I would definitely think that you were a creep.
But now I have to give that title to my most recent creation! Now presenting the hottest Jibbitz model in my collection! A Minecraft creeper face. With optimized profiles for easy support material, and low purging filament waste, this model was made for ANYONE looking to impress their Minecraft obsessed friend, OR their little brother :) Check it out!
-Leaf
Minecraft Creeper Jibbitz
5
9
Share
0
0
0
Has ANYONE else noticed the new point shop rewards?? USA now has around TEN new kits and gift cards that can be redeemed with MakerWorld points! From new LED lights, to 200 dollar gift cards, Bambu Labs is opening up so many new ways to reimburse creators. Thank you Bambu Labs!
-Leaf
Share
0
0
0
Hello Maker World enthusiasts!
I just uploaded a dual strap set for the Garmin Forerunner 735XT! The set includes a breathable version with air vents for running and a solid version for a cleaner, rugged look. Both print flat with minimal support utilization and reuse your original hardware. If you are still putting miles on your 735XT and need a fresh strap, give these a try! I would love to see your prints.
-Leaf
Garmin 735XT Dual Band Replacement
5
8
Share
0
0
0
Happy Valentine's Day everyone!! Looking for a perfect Valentine's Day print?? I’ve just released a Dual-Pack Heart Jibbitz set! It includes a classic heart and a multicolor tri-heart design. High quality, low print time, and maximum style. Grab the profiles here!
-Leaf
Share
0
0
0
Hey guys! With Valentines day right around the corner, now is the perfect time to print a Valentine themed design! And what better way to spend your filament then by printing a beautiful accessory for your everyday Crocs? (If you have an answer to that question I'd love to hear it in the comments!) Click the link below if you're interested!
-Leaf(Edited)
Share
0
0
0
Love is in the air… and now it’s on your Crocs!
Happy early Valentines day everyone! I just released these Heart Jibbitz, available as a single heart or a layered triple-heart design! They’re quick to print, beautiful both as multi and single color, and perfect for gifts, party favors, or adding personality to your everyday footwear! I've tried multiple different color combinations, and they all look amazing! If you print it, I’d love to see your color combos! Thank you!
-Leaf
Heart Jibbitz for Crocs
18
59
Share
0
0
0
Hello everyone! I'm very exited to tell you about an interesting phenomenon I came across while I was searching for inspiring models! If you attempt to search a single space in the MakerWorld search bar, you receive a curious error! I found this out because I very often search vague or unspecific words to elicit unexpected models, and I was pleasantly surprised to see this cute bugger pop up :) You should try it before the error is patched.
-Leaf(Edited)
Share
0
0
0
Check out my Kumiko-Inspired Honeycomb Planter Pot! Its complex geometric design prints cleanly without supports. The side panels slide in, and the top ring snaps down to hold them securely. I’ll be releasing more custom panels soon so you can keep personalizing your planter. Perfect for succulents, small plants, or modern desk décor. Thanks for taking a look — I’d love to hear how your planter turns out!
-Leaf
Indoor Succulent Plant Pot
6
27
Share
0
0
0
This is such a cool model! I sized it down a bit and put six on a build plate lined up perfectly. The end result was a super big fabric sheet that maintained that small-scale esthetic. I highly recommend this model and I think it's very good quality.
-Leaf
Share
0
0
0
This model printed super well! I was a little worried about only using a brim on the ball, so I put in a few well placed manual supports. It turned out incredibly, it was a great test for my new TPU filament dryer (for drying while printing) and it's extremely satisfying to squeeze. I recommend this model to everyone interested in a high quality TPU test print, a very satisfying toy, or a rainy day adventure model :)
-Leaf
Share
0
0
0
I made this Adorable Dog & Cat Keychain as a gift for a friend who loves cats! Since I’m more of a dog person, I combined both pets into a simple, lightweight silhouette that represents our friendship in a simple and kind way. It prints quickly with no supports and works great as a keychain, backpack tag, or small gift. I’d love to see your prints and hear what you think! Thanks for your support!
-Leaf
Adorable Dog & Cat Keychain
7
26
Share
0
0
0
I just uploaded a super neat snowflake Jibbitz for Crocs! It prints with support, snaps in securely, and is perfect for seasonal projects or first-time 3D printers. Entered in the Printmas competition, this charming design adds a touch of winter magic to your shoes—quick, satisfying, and fun for makers of all skill levels.
Super Neat Snowflake Jibbitz – Winter Croc Decor
17
58
Share
0
0
0
Hello everyone, I am excited to share my new sportbike silhouette keychain. It's thin, lightweight, and prints in one color with no supports. Perfect for beginners, motorcycle and car enthusiasts. I would love to see your prints and hear feedback! Thanks for checking it out!
-Leaf
Kawasaki Ninja Motorcycle Keychain
53
147
Share
0
0
0
In my younger brother's ongoing challenge to annoy as many people as possible with six-seven jokes, he has pursued many methods. Recently, he purchased six-seven jibbitz (for his Crocs) which broke extremely quickly. As soon as they fell apart, I took about fifteen minutes to CAD six-seven jibbitz that would actually last! So far, the mission has been a success.
Super Cool Six-Seven Jibbitz Croc Decoration
118
266
Share
0
0
0
This cello mute is exactly what a musician needs. It quits the cello's bold sound without removing quality. I had to procure a mute because of a new piece in my orchestra, and not only have I had no issues with vibration, but I also managed to save a few dollars by not using online shopping! It's very important that you print this model in TPU or a flexible alternative. For reference, I used TPU A85. It fits perfectly on a 7/8 size cello, and I highly recommend!
Share
0
0
0
Hey guys!
Thanks to Bambu Lab's flash sale, I now have the chance to play around with four kilograms of TPU! I have two rolls of A85 and two of A90. I would love to get recommendations as to what I should make. I will be your personal TPU guinea pig.
If you have any ideas that aren't listed, please give me a comment! I will probably take a maximum six or seven suggestions, so now's your chance to have a personalized review on a model of your interest! (Please don’t recommend anything that needs a ton of support because I don’t like filament waste...)
Thank you!
-Leaf
What should I print with my new TPU A85 and A90?
0%
Electronics case/new wallet
100%
RC car parts like new wheels
0%
A soccer ball (or similar toy)
0%
A watch band or bracelet
1 vote
Final results
Share
0
1
0
This is a very nice model. When printing, make sure to use a brim as the smaller sections of tail at the back are prone to coming off the build plate. I've printed this model in white and orange, and have both times been very happy with the result. Five stars!
Share
0
0
0
This is a super cool model! I was looking for a dragon/snake for my friend, and this one really caught my eye. It's very detailed, I love the length to width ratio, and it bends very well in any direction! I used white PLA basic and light blue PLA silk for my dragon. I highly recommend this model to beginner and experienced users alike, and if I had to make any comment it would be that you should use a 0.4 MM nozzle. For some reason I was having quite a few issues while trying to print with a 0.2, so if you don't want to mess around with the print settings (like I ended up doing) you should stick with a 0.4 nozzle.
Share
0
0
0