LadyBlair

HOME : SEWING

PenolopyBulnick

After seeing <a target="_blank" href="https://makerworld.com/en/u/3781219826" rel="nofollow noopener">Bamingo Design</a>'s beautiful Mountains coasters, I thought it would be fun to make some themed around cabins and camping since that is more personal to me.&nbsp;I used Craiyon.com to generate images (took a while to create a set that went well together) then did editing in Photoshop to get the colors and lighting right so that the color changes would be at the same layers for all the designs. I ran the designs through HueForge and made sure the color changes would match up. Lastly, I added a border to the coasters I created in Tinkercad.com right in the Bambu slicer.&nbsp;In HueForge, I purposely made 1mm the minimum depth so they would have some size to them.&nbsp;When it comes to printing them, I'm pretty happy with the settings that are in the Print Profile. One thing to think about is a brim. I printed these two at a time (in case I needed to print anything I didn't want to tie it up for the full 10 hours of all four coasters) and in the first two, one started to pull up while the other was fine. With the second set of two, I decided to use brims to be safe which worked. So, it's possible to print without brims, but if you want to be safe, I recommend adding brims.&nbsp;I made my coasters 4" as that seems to be a good size but you can resize them by making sure to scale the X and Y together, but make sure the Z is 100% so it is thick enough to match up to the color changes and not lose the image.&nbsp;I made a simple coaster holder in two heights. I made the one in the images a bit taller in case I add to this set with more designs, but I also provide a slightly shorter one that is made specifically for the 4 coasters. The shorter coaster holder also has a bit thicker of a base, but I think the thickness of the original is also fine as it shouldn't bend enough to break as designed. The image with the holder shows the in the shorter holder with the taller one next to it. &nbsp;Colors:Layers 1 - 14 : BlackLayers 15 - 20 : Silver (MatterHackers)Layers 21 - 27 : Light Grey (OVERTURE Cream Light Grey)Layers 28 - 31 : White (MatterHackers)Layers 32 - top : Black<ul><li>.08mm Extra Fine settings were used with .4 Nozzle.</li><li>Ironing on all top layers.</li><li>Gyroid infill is used where it is necessary but 100% infill could also be good with how small and thin it is.</li><li>I use a Prime Tower, but it is small. Possibly not necessary but helps sometimes.</li><li>4 colors</li></ul>

Cabin and Camping Coaster Set of 4 + Coaster Holder

Coasters

AzJake Creations

<div><h1>Summary</h1><div>I use these gauges to measure the corner fillets on components when I am designing. One file is a gauge is thousandths of an inch and the other is metric.I designed these on Fusion 360.For more information as well as the Fusion 360 files see <a href="https://azjake.com/radius-gauges" rel="nofollow">https://azjake.com/radius-gauges</a>I also have other projects listed on my website <a href="https://azjake.com/" rel="nofollow">https://azjake.com/</a></div><h1>Print Settings</h1>Printer Brand: <div>Creality</div> <pre><code> Printer: <div>Ender 3 Pro</div></code></pre> Rafts: <div>No</div> <pre><code> Supports: <div>No</div></code></pre> Resolution: <div>.16mm</div> <pre><code> Infill: <div>15%</div></code></pre> Filament: <a href="http://www.amazon.com/s?url=search-alias&field-keywords=Hatchbox+PLA" target="_blank" rel="nofollow noopener"> Hatchbox PLA </a><pre><code> Black</code></pre></div>

Radius gauge

TOOLS

Meister Edel

Cable Ties to be printed with flexible materials like TPU.The sizes are:<ul><li>90 mm</li><li>110 mm</li><li>130 mm</li><li>150 mm</li><li>170 mm</li></ul>I printed the mounts in PLA - 3 Perimeter 20% Infill 0,2 mm layer height. But ASA or PETG will be a better solution for the long run if you place heavy things on the holder.&nbsp;Have fun and keep printin!&nbsp;

Cable Tie TPU

HOME : Fasteners

MertDizzle

Edit: V2.1 expanded the opening for the screw head clearance Edit: V2.0 I added a new stl with a cut out for the screw head. I have not printed it out or tested it yetEdit: added a short version of the mounting arm to move the spool further back&nbsp;A quick and dirty mesh mixer remix I made combining two models to make the ultimate side spool holder. Needs some polishing. T̶h̶e̶r̶e̶ i̶s̶ a̶ s̶c̶r̶e̶w̶ h̶e̶a̶d̶ o̶n̶ t̶h̶e̶ c̶o̶r̶n̶e̶r̶ o̶f̶ t̶h̶e̶ p̶r̶i̶n̶t̶e̶r̶ t̶h̶a̶t̶ g̶e̶t̶ i̶n̶ t̶h̶e̶ w̶a̶y̶. T̶o̶ m̶a̶k̶e̶ c̶l̶e̶a̶r̶a̶n̶c̶e̶ f̶o̶r̶ t̶h̶i̶s̶ I̶ u̶s̶e̶d̶ a̶ t̶o̶r̶c̶h̶ l̶i̶g̶h̶t̶e̶r̶ o̶n̶ t̶h̶e̶ p̶r̶i̶n̶t̶e̶d̶ p̶a̶r̶t̶ a̶n̶d̶ p̶r̶e̶s̶s̶e̶d̶ i̶t̶ o̶n̶ t̶h̶e̶r̶e̶ u̶s̶i̶n̶g̶ t̶h̶e̶ 2̶ m̶3̶x̶8̶ s̶c̶r̶e̶w̶s̶ t̶o̶ a̶l̶i̶g̶n̶ i̶t̶. I̶ w̶i̶l̶l̶ c̶o̶m̶e̶ b̶a̶c̶k̶ a̶n̶d̶ f̶i̶x̶ t̶h̶i̶s̶ l̶a̶t̶e̶r̶. to prevent the roller from bouncing around when folded up I used some ca glue in the cups that hold the bearings. Another user made a clip to hold the bearings in place without using glue https://makerworld.com/en/models/110906#profileId-118547&nbsp;required materials -608zz bearings (x2) -Bolt M4x45 -Bolt M3x8 (x2)

Bambu Lab X1C / P1S / P1P Folding Rolling Side Spool Holder

PRINTER : Spool Items

Print4Gods

I remix the Bambu Lab Build Plate Holder print in 1 color or more if you want :-)&nbsp;thx <a target="_blank" href="https://www.printables.com/de/@JamesHartunia_404206" rel="nofollow noopener">@JamesHartunia_404206</a> you inspired me &nbsp;I added the logo and redesigned the look, the bottom plate on the front prevents the holder from tilting

Bambu Lab Build Plate Holder

PRINTER : Build Plate Storage

Little Mac Designs

A door corner sign to get you feeling Christmasy! One of the best parts of Christmas is bringing home that freshly cut Christmas tree! Enjoy this Christmas Season!!!

Christmas Tree Door Corner Sign

HOME : HOLIDAY

kaminski.john

I need to warn others that they cannot interrupt me. If I get interrupted, I will not be able to complete my task, and the 10 seconds that it would take to tell them not to interrupt will cause me to lose focus. Therefore, I made a sign, and as long as you can read you will know better to interrupt me. &nbsp;

No Self-Control Sign

HOME : SIGNS

buyse.martijn

Spice Jar holder

HOME : Kitchen

Ryxxi_makes

Clips onto the Cable chain very securely and rigidly. Then snap in the bowden tube. &nbsp;Use pliers to remove the clips by slowly lifting one end from the cable chain.&nbsp;The clips are very sturdy and dont move much.&nbsp;&nbsp;

PTFE cable chain clip for P1P/P1S and X1C

PRINTER : Bambu Printer Parts

K2_Kevin

Based on my original small Rugged Desktop Organizer, now biggie sized and GRIDFINITY COMPATIBLE 2x3!Includes Bambu Studio single and 2 color .3mf files.

Rugged Organizer Large Gridfinity

ORGANIZATION : Gridfinity

RoB.G

<ul><li>Puzzle box Small 52x52x30</li><li>Puzzle box Large 70x70x40 </li></ul>

Puzzle Box 

HOME : Puzzles

Makefy

It's planting season!<blockquote> TIP: Use a cotton pad in the bottom of each pot to keep the dirt from spilling into the bottom tray! &nbsp;</blockquote>&nbsp;This is a new version of a design I made and tested last season. Turned out to work great.The assembly consists of the following parts: Bottom Tray: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_52bc4f5b6a06.png"> This is the main part which holds water. It has guides for the pots and slots for the connecting beams. It should have enough solid bottom layers to avoid any infill. Just to make sure it's completly watertight.&nbsp;Connecting Beam: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_ab0b1e814f06f.png"> This is the part that supports the top plate. You will need 4 of these &nbsp;Pot: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_fb839ee86539c.png"> This is the pot itself. It consists of two parts that snap together. PLA seems to hold up pretty good for this part, but PETG or ABS might be a better choice. Top Plate: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_df2f64c41e23d.png"> This parts connects to the bottom tray with the four beams and holds the pots Greenhouse Dome: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_66dfe67204146.png"> This is a clear cover which provides a warm and humid environment for the seedlings. This part is provided in a separate print profile and should be printed in clear PETG or PC: — OPTIONAL --- Dirt Funnel: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_5f6384536a117.png"> The funnel makes it easier to fill the pots with dirt The Pestle: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_2ac2891fe5821.png"> Use this to gently pack the dirt.

Self Watering Seed Starter/Planter with Splittable Pots and Greenhouse Dome

OUTDOOR : GARDENING

maegu_

Hummingbird Silhouette Wall Art&nbsp;The Flower to this can be downloaded here : <a target="_blank" href="https://makerworld.com/de/models/99403#profileId-105975" rel="nofollow noopener">https://makerworld.com/de/models/99403#profileId-105975</a>&nbsp;

Wall Art - Hummingbird Silhouette

HOME : Wall Decor

liljohn406

**CHECK OUT V2 HERE** <a target="_blank" href="https://makerworld.com/en/models/185439#profileId-204181" rel="nofollow noopener">https://makerworld.com/en/models/185439#profileId-204181</a>**ALSO CHECK OUT MY RISER DRAWER SYSTEM HERE**  https://makerworld.com/en/models/185440#profileId-204184After many iterations I finally got something I am happy with. I used a led strip that is powered by USB and plugged it in the 5V plug behind the screen on my P1P/P1S. There are access holes on both sides to run cabling/led strip. Open pocket behind logo to stash some lights to illuminate it. Vents only on the sides with a sliding doors built in. Which are held down by the glass. Front logo is a seperate piece to save time and filament. Only two color changes this way opposed too many if it is part of the model. Picture was printed in Bambu Matte Black and Bambu Green. 3mf is set with slower outer walls to prevent bulging and poor overhangs at top of hexagons.

Sliding Vents Riser With Led

PRINTER : Bambu Top Riser

TrendtB

Easily add labels to your Bambu Lab reusable spools, with a remaining filament estimator!Compatible with Make My Sign for custom labels.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/212190/2023-11-28_115305ad38652.gif"></figure>&nbsp;I absolutely love the Bambu Lab reusable spools, but you're either stuck with the original label, or have none at all.I also like the indicator on their labels that gives you an estimate of how much filament is remaining.&nbsp;So I designed this press-fit label holder for the spools!<h3>FEATURES</h3><ul><li>Indicator shows estimated remaining filament (200g, 400g, 600g, 800g)</li><li>Coloured zone for under 200g (a reminder to order more filament!)</li><li>Press-fit design snaps onto the spool</li><li>Compatible with AMS</li><li>Easily change labels for different materials</li></ul><h3>INCLUDED LABELS</h3>I've included many common material labels, all generated through Make My Sign.Just duplicate the labels you want from “Common Filamanet Labels” to the “Copy labels to print here” plate, and your project will remain organized.<ul><li>PLA</li><li>PLA Matte</li><li>PLA Tough</li><li>PLA Marble</li><li>PLA Metal</li><li>PLA Silk</li><li>PLA Sparkle</li><li>HTPLA</li><li>PLA-CF</li><li>PLA Aero</li><li>PLA Alu(minium)</li><li>PLA Steel</li><li>Polylite PLA</li><li>PETG</li><li>PETG-CF</li><li>ASA</li><li>ASA-CF</li><li>ABS</li><li>PA</li><li>PC</li><li>PA6</li><li>PAHT-CF</li><li>TPU95</li><li>Supp(ort) PLA</li><li>Supp(ort) PETG</li></ul>Label designs powered by Make My Sign from MakerWorld(<a target="_blank" href="http://makerworld.com/makerlab/MakeMySign" rel="nofollow noopener">makerworld.com/makerlab/MakeMySign</a>)<h3>MAKE YOUR OWN LABEL</h3>You can create your own labels in Make My Sign, as long as you use the following settings:<ul><li>Rectangle Base Plate, 1mm thick, 1mm corner radius, Hole: None</li><li>10mm Height</li><li>43mm Width</li></ul>I used Roboto font for the included labels at size 36. If you have a 0.2mm nozzle, I'd recommend using a smaller font if you want to fit more text on the label.&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/212190/2023-11-28_8864da819adf2.png"><h3>MATERIAL CHOICE</h3>When choosing the material to print in, consider the environment your spool may be in.If you dry your materials, try to choose a filament that won't soften when your spool is in a dehydrator/heater.<ul><li>PLA is fine for PLA spools, and may be ok for PETG (not tested)</li><li>PETG and ABS are better for higher temp filaments.</li></ul>The example models used:<ul><li>Bambu Lab PLA Matte White</li><li>Bambu Lab PLA Basic Red</li><li>Bambu Lab PLA-CF</li></ul>&nbsp;<h3>REMOVAL</h3>If you want to remove the label holder for whatever reason, you can pop it off using a scraper. Wedge the blade underneath the holder and lift. If the pins break off, you can just push them through the holes in the spool using a small tool (e.g. hex key) and remove the debris.

Bambu Lab Spool Label - with indicator

PRINTER : Make My Sign

David Krammer

You can print it with AMS like I did for convenience, but you could also just make the printer stop at the middle height and switch colors yourself.This model makes about 45g of filament.

DIY Dual Color Filament 45g [NO AMS needed!]

PRINTER : FILAMENT

altair3d

DesignThis is a set from my layering line. The design idea behind these earrings had versatility in mind. These earrings can be changed and adjusted depending on what colors you want. I've designed them to be used with simple slip on hooks. I've linked them below. The print file will print total of 18 parts (2 hearts of each size in 3 different colors) and you can mix and match how you want to use them, or just make up a bunch of different pairs.&nbsp;HooksHere's a link to the earring hooks that I used for these earrings.https://a.co/d/538EuQc

Heart Layer Earrings

HOME : JEWELRY

squinn

Keep the contents of your 3-ring binder organized with this nice set of tabbed dividers. The tabs are large enough for labeling post-print, or 3D print text right on them in your slicer.&nbsp;The models are designed with a thickness of .6 mm, which creates a nice three-layered print at a layer height of .2 mm (and only consumes about 10 grams of filament). Three STLs are provided which can be used to create a full row of five tabs, top to bottom.

3-Ring Binder Dividers

HOME : OFFICE

Chamomile_3D

<h2>Test your 3d printer bed level!</h2>Easy to print model made to test the first layer adhesion. Print the first layer on the whole plate to ensure that you don't have issues with bed adhesion and calibration. <img src="https://makerworld.bblmw.com/makerworld/draft/537733/2024-02-15_831b5faec1368.png">&nbsp;<h3>Use the original print profile to ensure the best result!</h3>