Ladenraies

crabstiks

A fridge magnet design based on Captain Americas shield from the marvel avengers movies. It needs 2 magnets 3mm diameter by 10mm length, these push in after the print, there's no need to pause it. The model is split into three objects to allow easy selection of colours in Bambu Studio

Captain America shield fridge magnet 

Comics

Dr Operator

UPDATE 6/21/2024: The following changes were made based on feedback that I&#39;ve received.                                                                            - Increased the contact area of the slots on Waist 3 to help with stability.                                      - Adjusted plate #6 to prevent overlapping of calibration lines when using an X1C.                                      - Increased the circumferential height of both faces to prevent tilting when installed.                                      - Added additional supports to the chest.                                      - Added an additional magnet to the chest and door to help keep the door closed.                                           - Reduced the length of Hand 1 by 10%                UPDATE 5/17/2024: Seriously, all of the necessary supports have been added thanks to @SirWaynesworth and @SrGrinch. UPDATE 5/16/2024: I&#39;ve added supports for the head as per the feedback that I&#39;ve received.  I&#39;m having a lot of fun designing stuff around the MakerWorld hardware kits and up next is a Cogsworth clock using the Clock Components Kit 011 and 4x2 mm Round Magnet (20PCS) - CA001. Links to purchase both of those items are in the Bill of Materials list down the page further. When I got the hardware kit in my hands for the first time, two ideas came to me right away. This is the bigger, more complex of the two ideas. If you&#39;re not familiar with Cogsworth, he is a character from the classic Disney movie Beauty and the Beast. Notes:<ul><li>I made a “happy” face as well as the unimpressed face and the faces can be swapped at any time.</li><li> Fully assembled, it stands 312 mm or just over 12&#34;.</li><li>The Door Window colour is listed as white in the profile because there is no colour option for Transparent PLA in Bambu studio</li><li>This was fun, we should do it again sometime.</li></ul>&nbsp;Filaments used: Bambu PLA Basic - GoldBambu PLA Basic - Black Bambu PLA Matte - Dark BrownBambu PLA Matte - Desert Tan Eryone PLA - White AMZ3D PLA - TransparentAMZ3D PLA - Sakura Pink&nbsp;<figure class="image image_resized" style="width: 45.37%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000449421/design/2024-04-21_862053b705ab98.png"></figure>ASSEMBLY: Assembly shouldn&#39;t take long at all and while technically you don&#39;t need super glue, it is recommended for certain parts. Start with the face. For this you will need the Clock component kit, both hands, both nose pieces and the face you want to use. Insert the clock component into the back of the face and secure it with the nut that comes with the kit. From there, slide the hour hand onto the face followed by the first nose piece, the minute hand and finally the nose cap.  <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000449421/design/2024-04-30_2b963bbc1511c8.png">  <figure class="image image_resized" style="width: 37.41%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000449421/design/2024-04-30_ef73d37de10038.png"></figure>&nbsp;&nbsp;Now we&#39;re going to assemble the head. You will need all of the head pieces and the face. Start by fitting all four Head 2 pieces into the top of the head and then fitting Head 4 on top.&nbsp;<figure class="image image_resized" style="width: 62.78%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000449421/design/2024-04-30_34e58fcd8f6178.png"></figure>&nbsp;&nbsp;From there, slide the face into the back of the head and push it forward as far as you can. The back of the head attaches via magnets. When setting the magnets into the head and the back of the head, make sure you have the polarities correct. Once you have the head together, set it aside for now.<figure class="image image_resized" style="width: 71.85%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000449421/design/2024-04-30_daa109bace958.png"></figure>&nbsp; For the lower body, you will need all four feet as well as all four waist pieces. Fit the waist pieces over the feet as seen below, and I would highly suggest gluing that top piece down.<figure class="image image_resized" style="width: 65.32%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000449421/design/2024-04-30_e09bdb358c1618.png"></figure>&nbsp; Next up is the door. You will need the door, the door window and the Neck. The neck fits into the door and then the window attaches to the inside of the door, securing the neck in place.<figure class="image image_resized" style="width: 73.02%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000449421/design/2024-04-30_a64261c168d348.png"></figure>&nbsp;&nbsp;Now we&#39;re going to connect everything together. Start by attaching the legs/waist to the body, and I would highly suggest using glue to secure those pieces together. After that, attach the Arms to the body as seen below.<figure class="image image_resized" style="width: 83.04%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000449421/design/2024-04-30_e0147e75409638.png"></figure>&nbsp; Attach the head to the body with glue being highly recommended for securing the head to the body. Last thing to do is to connect the door. The hinge on the door itself has little notches and the body and door snap together using those notches.<figure class="image image_resized" style="width: 55.69%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000449421/design/2024-04-30_8e84ca12c1f21.png"></figure>

Clock Components Kit 011: Cogsworth

gadget

Mister.D

&nbsp;A minimal Desk Organizer (dual color) designed for your workspace. The print profiles are ready for AMS users so you can change the colors easy as you like, I personally like a PLA Marble filament combined with a dark filament on the base. This Model is for personal use only (non-commercial). DO NOT redistribute the files to anyone else.&nbsp;Those who are interested in product design, prototyping, product presentation and much more could contact me; my bio contains the contact details. Also, those who want to support my work, there is a link to do it:&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/iammister.d" rel="nofollow noopener">https://www.buymeacoffee.com/iammister.d</a>&nbsp;Have a good day, MR.D

Desk Organizer / v2

a faire

michelem

Welcome to our cozy Midcentury Modern Birdhouse!&nbsp;It&#39;s not just a home for birds – it&#39;s a stylish retreat full of cool features like a Wifi enabled camera for birdwatching and more!&nbsp;Around the house, you&#39;ll find cool stuff like a modern textured panel, tiny cacti, a cute wooden-effect wall, a pergola for shade and a handy tray for seeds or plants. There&#39;s even a pop of color with a fun angular piece!&nbsp;Of course, there&#39;s a 35mm entrance and a little perch for our feathered friends.&nbsp;But the coolest part? The roof has a big opening covered by a magnetic box that looks like a mini terrace. It&#39;s not just for looks – you can put a plant in it with the &#34;Terrace Box&#34; component or add a WiFi camera with the &#34;Blink Support&#34; part to see what the birds are up to!&nbsp;It comes with mounts for walls or poles, so you can place it wherever you like.&nbsp;Printing it is easy but takes a bit of time. Since it&#39;s for outdoors, use tough materials like PETG, ABS, or ASA is recommended. PLA might fade or warp in the sun.&nbsp;You&#39;ll need screws, bolts, inserts, and magnets – check the list below for everything you need!&nbsp;Assembling it is quite intuitive, but I have attached the complete instructions.&nbsp;To add the Wifi camera you will need a Blink device (works with Blink Outdoor 3 or 4). You could need also the Sync Module or an Alexa device to connect the camera to.&nbsp;I personally used these:&nbsp;<a target="_blank" href="https://www.amazon.it/dp/B086DKRWCH?psc=1&amp;ref=ppx_yo2ov_dt_b_product_details" rel="nofollow noopener">Blink Outdoor Camera</a> <a target="_blank" href="https://www.amazon.it/dp/B084RPZGR2?psc=1&amp;ref=ppx_yo2ov_dt_b_product_details" rel="nofollow noopener">Blink Sync Module</a>&nbsp;NOTE:It&#39;s recommended not to install the birdhouse in direct sunlight, especially if equipped with the WiFi camera. Best place would be under a tree or similar.&nbsp;Dimensions&nbsp;The base is 25cm x 20cm. The house with terrace is tall about 19cm max.&nbsp;Unfortunately, I&#39;ve just finished and mounted the first one, so I don&#39;t have any videos of our little friends to show you yet. However, here&#39;s a peek inside with the camera:&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000468694/design/2024-05-19_c9dc902e65eab.jpeg"></figure>Get ready to enjoy building your birdhouse and making new feathered friends!

Modern Midcentury Birdhouse - Wifi Camera enabled

Jardin 

waltersworld3d

<a target="_blank" href="https://www.patreon.com/waltersworld" rel="nofollow noopener">https://www.patreon.com/waltersworld</a>&nbsp;Be sure to check out our Patreon for all newly released models, monthly giveaways, and the opportunity to have models designed custom for you&nbsp;🔥 Unleash the Hulk within!!! 💥&nbsp;Get ready to bring the power of the green behemoth to life with our L3GO-inspired 3D printable Hulk figure, standing a towering 10 inches tall! With articulate arms and hands, this masterpiece captures the raw strength and intensity of everyone&#39;s favorite gamma-powered hero.&nbsp;🌈 Key Features:✅ 10 inches of pure Hulk power✅ Articulate arms and hands for dynamic poses✅ L3GO-inspired design for a perfect blend of nostalgia and modernity✅ Printable with just 1 Bambu AMS unit – Easy and Efficient!&nbsp;🚀 Bambu AMS Compatibility: Seamless printing awaits you! Our Hulk figure is designed to be printed effortlessly with just one Bambu AMS unit, ensuring a hassle-free and high-quality printing experience. Let the Automatic Material System (AMS) handle the details while you witness the Hulk come to life.&nbsp;💪 Unleash Your Creativity: Whether you&#39;re a superhero fanatic, a L3GO enthusiast, or a 3D printing pro, this Hulk figure is a must-add to your collection. Create dynamic displays, showcase your printing skills, and let the Hulk take center stage in your masterpiece lineup.&nbsp;Don&#39;t forget to check out our other Marvel L*GO inspired figures to complete your collection!

Bricks Hulk

lego

MaXiLuPa

A beautiful vase that also holds water. It is printed with a 0.4mm nozzle, but a wider 0.6mm thick wall.

Spiral Vase

Vase

daniel.k

<h3>Deutsch:</h3>Ein kleine kleine Verbesserung für den Luba, um ihn 6 Messer pro Seite zu ermöglichen.&nbsp;Was brauchst du:12x Ruthex M4x8.1 Gewindeeinsätze<figure class="image image_resized image-style-align-right" style="width:24.13%;"><img src="https://makerworld.bblmw.com/makerworld/user/1466385815/draft/2023-09-26_7v50ml4lr87v.png"></figure>&nbsp;Tipp:Zudem empfähle ich Klingen zu verwenden die Hinten angeeckt sind. (Die Klingen lässt sich länger bewegen und entfernt das Gras eher von der Klinge)<figure class="image image-style-align-right image_resized" style="width:26.07%;"><img src="https://makerworld.bblmw.com/makerworld/user/1466385815/draft/2023-09-26_xo7hqofyipa8.webp"></figure><h3> </h3><h3> </h3><h3>English:</h3>A tiny little tweak for the Luba to allow it to have 6 knives per side.&nbsp;What do you need:12x Ruthex M4x8.1 threaded inserts&nbsp;Tip:I also recommend using blades that are conered at the back. (The blades can be moved longer and remove the grass from the blade sooner)

Mammotion Luba Schneidwerk 6 teilig

mammotion

schuetzi99

This holder is clamped onto the sun visor of the car, or onto your shower cabin door. It reliably holds a pair of glasses without interfering. So the sunglasses are easily at hand when you need them. Easy to print with standard parameters. There is also a short version, which needs less filament. Because of the high temperature in the car, you should use PC or ASA, or other materials that can withstand high temperatures.Designed with OpenSCAD.&nbsp;Please take also a look to my <a target="_blank" href="https://makerworld.com/de/models/42663" rel="nofollow noopener">tissue dispencer</a> <a target="_blank" href="https://makerworld.com/de/models/42663" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/127086/2023-10-28_ca670b308e769.jpg"></a>

Glasses holder for car sun visor

Voiture

SavageLau

<h2>If you want a commercial license, check out my bio and get it from Patreon.</h2><h2>Personal use only.</h2>&nbsp;This model is design for MakerWorld light contest (2/5). Complete free version is only available on here Makerworld. <h3>Many people have contacted me said they willing to pay for the model. Other platform product manager reach and out said I could use their platform and selling this design for some money, but I have decided to keep it here for free for now. So there will be more people could enjoying it :) So show me your finshed print, I would like to see it. </h3><h3> Anywhere else you see this model upload is Unauthorized (please notify me and report them), beside my own account (SavageLau). </h3>&nbsp;<h2>If you would like purchase LED light needed for this design and filament from Bambu Lab Offical website: Affiliate link is below, so I can get some commission to support my future work. </h2><h2><a target="_blank" href="https://shrsl.com/4h4np" rel="nofollow noopener">https://shrsl.com/4h4np</a> </h2><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-03-23_4ad27b7082fe3.png"></figure><h2>Filaments that I use for this project: (Bambu Lab Offical website:)</h2><h2><a target="_blank" href="https://shrsl.com/4h4ns" rel="nofollow noopener">https://shrsl.com/4h4ns</a> </h2>&nbsp;&nbsp;&nbsp;<h2>You may also like this design:</h2>PeaShooter Lamp Kit 001. <a target="_blank" href="https://makerworld.com/en/models/174475#profileId-191833" rel="nofollow noopener">https://makerworld.com/en/models/174475#profileId-191833</a> &nbsp;&nbsp;&nbsp;My boss saw some Bellsprout light the other day and she want me to design one. I have one LED Lamp kit come with my a1mini and sitting for a while. So why not turning it into what she want. So the design started adpot the lamp kit into Bellsprout.I found this pic on Google, based on the posture and proportion started deisng.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-01-30_bc131748fd272.png"></figure>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-02-01_33679f29d502a.png"></figure><h2>Update: </h2><h3>2/2/2024. A new profile was made for a1mini. Increased infill/walls on base and body part. </h3>Model main body have been reduced in size inorder to meet the build plate size for a1mini with muti-color prints. &nbsp;<a target="_blank" href="https://makerworld.com/en/u/2010665163" rel="nofollow noopener">@Sascha2202</a> feedback it is a bit hard to keep banlance. Weight increased on printing profile by adding more infill and walls. Weight for that part from 160g to 202g, lowered center of gravity. Consider head is around 40g + led weight, it should do well now. <h3>2/1/2024. Joints redesigned. </h3>Improved joints firction load, strength, tolerancing. New turning angle sets around 13.5 degrees max for each joints. <figure class="image image_resized" style="width:36.72%;"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-02-01_d00693a8b7acb.png"></figure>“Head” part fit and finish improving. <h3>Revisions and Tests today:</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-02-02_ffe7e41994dec.png"></figure>&nbsp;<h2>Before you print(Important!):</h2>Run the joint test print first with the filament you are going to use for joints and body, before you doing the full print! This is important. Depend on filaments you use for the joint parts, there will be sinkage rate difference, and firction load on joint will be different.&nbsp;I put very tight tolerancing on design, but it may not work as intended when you printing with your filaments, so run the test and confirm joints is very tight to each other. Other wise You will not get the desired result.&nbsp;&nbsp;Joints with other parts are standard size. There is one “Tight” profile for joints. There are two types of joint, regular and with wire clip one. You will need to print total of 12 or above (maybe less than 15) to get good proportion. &nbsp;Joints designed best work with 4 wall layers, and 10% to 20% infill, adding more infill will not improve the strength, will only leading part failure during assembly. &nbsp;<h2>Hard ware:</h2>This design require Lamp LED Kit 001 from Bambu Lab. All other parts are printable. <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-01-31_bca061fd80f1d.png"></figure>&nbsp;<h2>Post work:</h2>Removing brims from all parts, when you remove brim from joints part, confirm it is fully removed. <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-02-02_dec1b2c670225.gif"></figure><h2>Assembly:</h2>Refer these gif image. Joints is a bit hard to push in, refer how I do it, holding the bottom part with you fingure, it will reduce the change of failure. &nbsp;Joints:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-02-02_5c978e23e8634.gif"></figure><figure class="image image_resized" style="width:51.25%;"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-02-02_9f2e463b2d8a6.gif"></figure>Fully assembly:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-02-02_9a975d341b61f.gif"></figure>&nbsp;&nbsp;&nbsp;<h2>Design:</h2>Lamp kit is 60mm dia, 8mm thickness. based on that dims and make rough draft to evaluate the overall size.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-01-30_34bf66e6b20e5.png"></figure>&nbsp;Working on some parts, and integrate them in the end.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-01-30_4880a9ab2336a.png"></figure>&nbsp;I started with wanting ball joint on the head, so it will able to turn angles. End up why not to have more ball joints on the body.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-01-30_b08f0ea2e5ee9.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-01-30_80ec7f991cbaa.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-01-30_80ed16d7dd498.png"></figure>&nbsp;Ball joints is pain in the axx to work with. I want it to have a lot of friction load in normal condition. so the outter shell shall have very small tolerance to the ball or even smaller. Ended spending a lot of time try in truth to testing out different tolerances and make design revisions.Still not perfect, but it work for this application. You gain a lot of DOF, but it is a bit brittle, depends on your materials.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-01-30_153933e0ba5bb.png"></figure><h2>Revisions and tests:</h2><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-01-31_641c974fd0d58.png"></figure>

BellSprout Lamp LED Kit 001

Lamp 001

martin.taichl

This is my model of the Puddle Jumper from the Stargate franchise. It has retractable engine and weapons pods. No interior though. It is little bigger, but in scale with my gates.Here you can see a video about the project includin an assembly. Please ignore the colour differences on the model. It needs to be painted anyway ;) <div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=3eFA0s0bt1A"><iframe src="https://www.youtube.com/embed/3eFA0s0bt1A" frameborder="0" allowfullscreen=""></iframe></div>&nbsp;Enjoy.Category: Vehicles

Puddle Jumper from Stargate

serie

squinn

A must-have drill accessory tool that both allows you to make sure you drill a perfectly perpendicular hole while also capturing all of the dust and debris. The front of the tool rotates so that you can select the guide hole that will best work for your drill bit, and then the cover on the back can be easily removed with a twist to dump the debris when you're done. A protruded pointer is included on the top of the piece to help with alignment.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/163361/2023-11-11_s7cilgno7l35.gif"></figure>This model has been designed so that no supports or brim are required, and the STLs are oriented as they should be on the print bed. Post print, the front and middle piece can be simply snapped together, so no glue or other hardware is required. I printed all three pieces of the one shown in the pictures in PLA, but TPU would likely work really well for the bottom “cover” piece if you have it.

Drill Guide and Dust Catcher

Bricolage

Quincaillerie 

fay3dlab

Since my suspended millenium falcon was such a hit.. i was motivated to make more of them..This time i made the Suspended Imperial Star Destroyer.. the ship itself is modelled by nikoli2803 from thingerverse.. the circular frame is the imperial logo itself.. the whole frame i modelled it to look like the deathstar.. everything was done using Tinkercad.. The print comes in 5 parts..<ol><li>front ship</li><li>back ship</li><li>bottom clip</li><li>top left clip</li><li>top right clip</li></ol>The ship itself comes in 2 parts.. front and back.. and there are 3 clips to hold both side of the ship together.. the bottom clip will be the stand for the whole suspended star destroyer and the 2 clips works on any side..Its a bit tricky to assemble since you cant put both parts of the ship down since its suspended on the strings..<ul><li>so my suggestion is to put the bottom clip down on a table and then put the 2 parts into the clip..</li><li>it should fit snuggly together..</li><li>once the frame can stand on its own.. you can put the other 2 clips onto the frame..</li></ul>*UPDATE*I just made a new updated V2 of the suspended star destroyer.. with adding channel for LED light strips.. <img src="https://makerworld.bblmw.com/makerworld/draft/516824/2024-01-01_bdc509315a0c2.gif">you can download the new version here: <a target="_blank" href="https://makerworld.com/en/models/117449#profileId-126250" rel="nofollow noopener">https://makerworld.com/en/models/117449#profileId-126250</a>&nbsp;When printing suspended models.. one important thing to remember is to set the wall generator to arachne from classic.. this will make the slicer print the strings..I hope you guys have fun printing this suspended imperial star destroyer..

Suspended Star Destroyer

star wars

JesseZhang

Battery holder for DJI Goggles2. Attach your battery and cable to the headband. It is recommended to install it between two pieces of Velcro so that the hard plastic part does not directly contact with the skin. The clip on the holder has a non-slip structure that prevents the battery sliding from one side to the other.My goggles came with a 36mm headband, and I'm not sure if other regional versions are the same width. Let me know if you have different version. Print with no support. PLA or PETG

DJI Goggles 2 Battery holder with cable snap

drone

3D Prints This Week

Load black and yellow into AMS.&nbsp;If you don't have AMS&nbsp;Start with black and swap to Yellow at layer 7.&nbsp;If you enjoyed the file and want to show us some love, feel free to buy us a cup of coffee in the link below.&nbsp;https://www.buymeacoffee.com/3dprintsth3

Pacman Retro Art / Video Game / Wall Art / 2d art

JamesThePrinter

Six versions are available:<ul><li>Little Debbie Christmas Tree - Bite<ul><li>Multi-Color</li><li>Single Color</li><li>No Ornament Loop</li></ul></li><li>Little Debbie Christmas Tree - No Bite<ul><li>Multi-Color</li><li>Single Color</li><li>No Ornament Loop</li></ul></li></ul>Check out the rest of my Christmas models <a target="_blank" href="https://makerworld.com/en/u/1360890085/collections/69417" rel="nofollow noopener">here</a>!&nbsp;&nbsp;Print SettingsMulti-Color Version - To ensure that the sprinkles don't easily break off, I sunk them about 1mm into the frosting. The downside of this is that the first couple top layers of frosting can be messy. To help with this, I used 5 top layers.&nbsp;Single-Color Version - no special settings are required&nbsp; <a target="_blank" href="https://www.buymeacoffee.com/JamesThePrinter" rel="nofollow noopener">Buy Me A Coffee</a>&nbsp;&nbsp;The following filaments were used in the pictures above:<ul><li>Bambu Lab Matte Ivory White PLA</li><li>Bambu Lab Basic Bambu Green PLA</li><li>Bambu Lab Matte Scarlet Red PLA</li><li>Bambu Lab Matte Lemon Yellow PLA</li></ul>

Little Debbie Christmas Tree

Noël

neil3dprints

Relive your 8 bit childhood with the Miniature Mario play-set. Simply unfold the case and attach the contained parts to the outside for hours of fun. The set also comes with a Mario and Koopa Troopa characters. Designed to resemble the a scene from Super Mario 3, this set provides entertainment for any fan of the original Nintendo game.This was originally released to my Patrons over a year ago. And as it was Mario day the other day, it felt like the right time to bring over to here.Be sure to refer to the images for assembly instructions.Also note this is not a MMU print. This is intended to print in parts in the appropriate colours and then glue together.For instructions on how to carry out filament changes mid-print, please refer to this link below on how to do this. <a href="https://help.prusa3d.com/en/article/color-change_1687" rel="nofollow">https://help.prusa3d.com/en/article/color-change_1687</a>If you are interested in early releases and exclusive designs please check out my Patreon.<a href="https://www.patreon.com/neil3dprints" rel="nofollow">https://www.patreon.com/neil3dprints</a>If you want to stay up to date with this series and or perhaps interested in other projects I am working on, please check out my instagram.<a href="https://www.instagram.com/neil3dprints/?hl=en" rel="nofollow">https://www.instagram.com/neil3dprints/?hl=en</a>Any questions or queries either leave a comment below or send me a DM.Happy printing. ;-)

Miniature Mario Playset - With Mario and Koopa Troopa Characters

figurine

harrypulvirenti

It is basically an optimisation of the original design but is functionally the same. This remix eliminates a rear wall to use less material and makes overhangs less pronounced to make the model easier to be printed. I strongly recommend using brim to print it if you don't want to see the heel fall.You can find the suggested orientation used to print the object in the images.With the proposed orientation the object should fit without scaling it, you will maybe just need to move it a little bit into position, but some user reported that scaling it down to 95% also works well. &nbsp;I tested it with my X1C and is perfectly compatible. About the P1P the original model was compatible with the P1P without enclosure and this remix have the same compatibility

Bambu Lab - Filament Poop Bin - X1, X1C, P1P and P1S

Tech with Kramer

This is what I use to store my extra spools. A little bit wobbly, but it works for what I need. The taller you make it, the less stable it is. Those need to be glued together. The best glue I could find for this is the following: <a href="https://amzn.to/44Ym2bj" rel="nofollow">https://amzn.to/44Ym2bj</a>(Links may be affiliate links; thanks for your support.)