Kucher

jocin_

Addition 14.06.2024I found  the G-Code adaption which <a target="_blank" href="https://makerworld.com/en/@AdamL" rel="nofollow noopener">AdamL</a> introduced with his model: <a target="_blank" href="https://makerworld.com/en/models/467118#profileId-378814" rel="nofollow noopener">The Scrubbler: Enhanced X1/P1 Nozzle Wiper</a> very cool and a awesome idea, thanks for sharing this idea. I took inspiration from this and implemented my own version in the Change filament G-Code. Also I adapted AdamL ´s code for the Machine start G-Code so that the travel path is lower and fits my design better. During testing I mentioned that lower acceleration of about 15000 had a better cleaning effect. But could be that this is specific for my X1C.If you want to implement this i uploaded a instruction “240614_nozzle_rub_G-Code_adaption.pdf”, you find it under: “Documentation”.&nbsp;This is what it looks like:<ul><li>Machine start G-Code <img class="image_resized" style="width: 43.78%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000094607/design/2024-06-14_5952291fb477b.gif">  </li><li>Change filament G-Code <img class="image_resized" style="width: 43.85%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000094607/design/2024-06-14_4d3b92720c696.gif"></li></ul>&nbsp;Have fun!_________________________________________________________________________________________________________________________________________Update 08.01.2024Quick update on the tray for both brushes. Added a small plug to the bottom of the tray to prevent it from rotating because there where some issues reported with that.<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000094607/design/2024-01-08_90b8ac2f999d08.jpg">New raw model files:<ul><li>A1-Brush:<ul><li>Nozzle_wiper_x1c_with_a1_brush v3.step</li><li>tray_A1_v3.stl</li></ul></li><li>A1-mini-Brush:<ul><li>Nozzle_wiper_x1c_with_a1-mini_brush_v2.step</li><li>tray_A1-mini_v2.stl</li></ul></li></ul>Updated all my print profiles with a second plate which contains the new version.&nbsp;If want to use your own print profiles, use arachne wall generator and orientate the Tray like this:<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000094607/design/2024-01-08_a51cb51bab44c8.jpg">&nbsp;This compromises the print ability of the tray and supports are needed, use paint on supports like this:<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000094607/design/2024-01-08_595ac1760a20b8.jpg"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000094607/design/2024-01-08_8c081c3a42f8f.jpg">Support setting:<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000094607/design/2024-01-08_f5ff07781ab9.jpg"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000094607/design/2024-01-08_be0bf17e5065d.jpg">!Be care full to not hurt yourself when removing the supports in the tray, use pliers or a small slotted screwdriver!&nbsp;Thank´s to all for the feedback____________________________________________________________________________________________________________________________________________________Update 04.01.2024New A1 brush version, with following changes:<ul><li>Chamfer on the tray  </li><li>Lowered height of the block 0,5 mm</li></ul>Thanks <a target="_blank" href="https://www.printables.com/@coreyward" rel="nofollow noopener">@coreyward</a> for the suggestions&nbsp;Addition for print settings:If want to use your own print profiles use the arachne wall generator to get a support for the overhang on the block.<img class="image_resized" style="width: 30.29%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000094607/design/163521ea-447a-44a5-a9cb-dd1d5dfe496e.jpg"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000094607/design/2024-06-14_3a22e0a17d5b7.png">&nbsp;________________________________________________________________________________________________________________&nbsp;Update 26.12.2023On request I adapted the design to fit the A1 brush. Under “Raw model files” there are now two folders, use the parts in the “A1-Brush” folder if you want to use the A1 brush. Both parts are needed to use the A1 brush.Just import the parts in one of the existing print profiles, orientate them the same way and print;-)!Attention! with the A1 brush there is very little clearance between the tray and the build plate, so make sure to align the build plate properly.<img class="image_resized" style="width: 38.16%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000094607/design/2024-06-14_ccf6556620e57.jpg">&nbsp;Thanks @<a target="_blank" href="https://makerworld.com/de/u/2924277124" rel="nofollow noopener">GE_AMX</a> and @<a target="_blank" href="https://makerworld.com/de/u/2038862755" rel="nofollow noopener">kevman</a> for testing_____________________________________________________________________________________________________________Update 20.12.2023I used the A1-Mini brush, as it is different to the A1 i:<ul><li>corrected the link</li><li>corrected the description</li></ul>Thanks <a target="_blank" href="https://www.printables.com/@schiko" rel="nofollow noopener">@schiko</a> for pointing that out on printables.com_______________________________________________________________________________________________________________I liked the nozzle brush of the A1-Mini, so i designed two parts to use it on my X1C along with the original wiper.Needed parts:<ul><li>for mounting use the original screw for the nozzle wiper, 3 of them are needed</li><li>A1-Mini nozzle brush <a target="_blank" href="https://store.bambulab.com/products/heatbed-nozzle-wiper-a1-mini?skr=yes" rel="nofollow noopener">https://store.bambulab.com/products/heatbed-nozzle-wiper-a1-mini?skr=yes</a>  </li><li>some double-sided adhesive tape <img class="image_resized" style="width: 52.08%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000094607/design/2024-06-14_1a14497a8d7958.jpg"></li></ul>Mounting:<ol><li>Mount the original nozzle wiper on the block <img class="image_resized" style="width: 40.83%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000094607/design/2024-06-14_72222ec740b41.jpg"></li><li>Mount the block to the poop chute <img class="image_resized" style="width: 44.99%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000094607/design/2024-06-14_aa9d2448f7399.jpg"></li><li>Cute the A1-Mini nozzle brush to 10 mm length put some double-sided adhesive tape to the bottom and put it in the tray <img class="image_resized" style="width: 19.76%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000094607/design/2024-06-14_06cde2db1acfe.jpg"><img class="image_resized" style="width: 22.2%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000094607/design/2024-06-14_1d57b502adf3a.jpg"><img class="image_resized" style="width: 28.98%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000094607/design/2024-06-14_8eab04be6eec8.jpg"></li><li>Mount the tray on top of the block <img class="image_resized" style="width: 47.42%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000094607/design/2024-06-14_dd9145e102d4b.jpg"></li></ol>Filament: extrudr greentec pro (or ABS, ASA, PETG etc.)Print settings:<ul><li>orientation: see picture and attached 3mf</li><li>layer height: 0.12</li><li>wall generator: arachne (edit 04.01.2024)</li><li>wall loops: 3</li><li>Top/bottom layers: 6</li><li>infill: 10% gyorid</li><li>support: no</li><li>brim: no</li></ul>

Bambu Lab X1/P1 nozzle wiper with A1 Brush

Tools

dadhacks

This is a different take on the standard purge (poop) chute and bucket. Let your little ghosts slide or drop into the ghost trap, with handle for easy removal and dumping. 2 options available - 1 with the containment unit for those that put their ghost trap behind the printer, and 1 with a slide for those that want their ghost trap on the side.&nbsp;Notes:<ul><li>Ghost trap is meant to be assembled with glue. This was done to keep purge and print time to a minimum. Flat design meant to accommodate tight placement against printer.</li><li>This has been broken out into 5 different build plates to limit each to 4 colors per plate for those with only 1 AMS.</li><li>Smooth PEI recommended for the side panels and doors; just gives a nicer finish.</li><li>Need to use 2 15x3 magnets for the slide.</li><li>Need to use one of the longer M3 course threaded screws (or similar) from the scraper kit that came with the printer to hang the containment unit chute.</li><li>Supports required for containment unit chute and part of the handle.</li><li>Vent holes in side of containment unit chute to keep from impeding any airflow to the vents on back of printer.</li><li>Please note the build plates are preselected. If you want to use a different build plate, please ensure you click the nut icon next to the build plate to change. </li></ul>

Ghost Trap Poop Chute Kit for BambuLab P1 and X1 Series 

SavageLau

<h3>If you want commercial license, check out my bio and get it from Patreon.</h3>&nbsp;<h3>I am here to introduce you, retractable dragon wand! I made this design for Makerworld dragon contest (3/5). I think it will be a great addition Ornaments and toy for kids for new Dragon year. </h3>&nbsp;<h3>Best wishes to you all! 新年快乐.</h3>&nbsp;This wand takes me a while to design and tests. It takes around 2h33m to print and cost right around 50g filaments.The retractable part is not super rigid, it's by design, I did not put a lot of parameter in there, consider this will most gives to kids to play. So rather it break than hurt somebody.&nbsp;<h2>Update:</h2><h3>v1.5 (1/13/24) - Fix internal parts geometeric issue. (tested) It only applys on P & X Series profile.</h3>Printing profile for P & X Series have found geometric issues on inner parts. Which only occurs when selecting P&X series printers, A1 and A1mini profile doesn't have this issue. Internal parts have been redo. Profile for a1 mini, A1 have remained as v1.4 since it is working correctly.&nbsp;&nbsp;<h2>Detail display:</h2><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/413415/2024-01-11_161fe41bfd6c.gif"></figure>&nbsp;&nbsp;<h3>My other wand design: </h3>Loong Wand:<a target="_blank" href="https://makerworld.com/en/models/143028#profileId-155486" rel="nofollow noopener">https://makerworld.com/en/models/143028#profileId-155486</a><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/413415/2024-01-16_55943d4f3e579.jpg"></figure>&nbsp;Harry Potter Wand: <a target="_blank" href="https://makerworld.com/en/models/68778#profileId-72937" rel="nofollow noopener">https://makerworld.com/en/models/68778#profileId-72937</a> <figure class="image image_resized" style="width:69.8%;"><img src="https://makerworld.bblmw.com/makerworld/draft/413415/2024-01-11_db6b2ce5b060b.jpg"></figure>&nbsp;<h2>Instruction:</h2>I put very large size of brim on all my printing profile, with 0mm gap to ensure the printing success rate. Since this model is a bit challenge to print.You will required to do some post work of removing brim off. It should be very simple. I have increased gap on first layer from design, so it is tight tolerance, but not super tight.&nbsp;&nbsp;<h2>Materials:</h2>If you are printing with some high shrinkage rate filaments, like some of the silk filament. Due to the sinkage rate different. Your part might slide out or break very easily. So, use some good filaments.&nbsp;<h2>Design:</h2>Let's talk about a little bit of design. The retractable mechanism is very simple, the inner piece is interlocking with outter pieces.<figure class="image image_resized" style="width:24.07%;"><img src="https://makerworld.bblmw.com/makerworld/draft/413415/2024-01-11_651c54592313e.png"></figure>Style is more challenging<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/413415/2024-01-11_37b064643dfb6.png"></figure>Adding more details.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/413415/2024-01-11_d16c3620c7aab.png"></figure><h2>Printing suggestions:</h2>This is a tall object with very small contact area on first layer. It is challenge to print. It will print without brims, but it fail very easily that way. If you are slicing the model yourself, make sure you add brims, and set brim gap to 0mm. Also increase the first layer thickness.Or, just use those profile that I put there. It all have been tested and confirm works.&nbsp;&nbsp;&nbsp;

Dragon Wand (Retractable) v1.5

Toys

palumbus

Wall Art of a horse with flowers.It needed a second try to print, because of the adhession.Please let me know, if it is also working fine for you.