Ktkatz

Marcel

Hello everyone,this time I have printed a key ring for my upcoming trip to the lake that can&#39;t sink. If you lose your key at sea, it always floats to the top and you can find it again.&nbsp;The print is very fast and takes about 30 minutes and doesn&#39;t need 30g of filament.&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000469185/design/2024-05-19_c201ca09e12ca.gif">&nbsp;EDIT: Edited the geometry of the model to reduce overhangs and increace print quality! As always, be cool to each other and check out my other designs!&nbsp;<figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000469185/design/2024-05-19_79378df83c188.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000469185/design/2024-05-19_8c4c29401cf85.png"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000469185/design/2024-05-19_df3bdaaf0635b.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000469185/design/2024-05-19_ed877a8f2e9a6.png"></figure></td></tr><tr><td> </td><td> </td></tr></tbody></table></figure>

Floating Buoy Keychain Floater

fishing 

WarriorSoto

Fun record player to place in the car fan diffuser. Four separate bodies: Clip, Disc, turbine and needle. The assembly is very simple.&nbsp;An MR105ZZ bearing (5x10x4mm) is required for smooth and easy spinning.&nbsp;I have made two different albums, by legendary music groups. In future versions, I will expand the models.&nbsp;Printing with ABS, ASA or PETG is highly recommended to withstand summer temperatures.&nbsp;Enjoy.

Car Record player

cars

Cayden3D

This custom-designed flosser dispenser is right at home in any bathroom, kitchen, or dining room- keep those plackers handy! Print in PETG or ABS to keep one in the car!&nbsp;Keep the germs out and never be without a flosser with this awesome little dispenser! My design holds 22 Plackers brand flossers and is easily refillable via the self-securing lid. &nbsp;You’ll love using the compliant dispensing mechanism, and you can always keep an eye on how many flossers are left.&nbsp;**Note** specifically sized for: -Plackers Micro Mint -Plackers Twin-Line Flossers. -Plackers EcoChoice

Flosser Dispenser for Plackers

bathroom 

Just_Josh

I have created two landscape light globes that look amazing in our flowerbed. The globe is designed to fit a 3.15&#34; solar puck like the ones in the link below. I printed the globes out of translucent PETG and the stake could be PETG, ABS or ASA. (mine was PETG)&nbsp;The globe will screw onto the stake making it very easy to change if you want different colors based on the season. &nbsp;The light is a very snug fit, this is intentional to keep water from entering the globe when it rains.&nbsp;Solar Light <a target="_blank" href="https://www.amazon.com/gp/product/B0BYSY98F6/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&amp;th=1" rel="nofollow noopener">https://www.amazon.com/gp/product/B0BYSY98F6/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&amp;th=1</a>&nbsp;&nbsp;I hope you enjoy and if you do please check out my other models.<a target="_blank" href="https://makerworld.com/en/@Just_Josh" rel="nofollow noopener">https://makerworld.com/en/@Just_Josh</a>&nbsp;&nbsp;

Solar Landscape Light

outdoor

rky.91

Here is a new design for my slinkies collection.Other models available here: <a target="_blank" href="https://makerworld.com/en/@rky.91/collections/510046" rel="nofollow noopener">https://makerworld.com/en/@rky.91/collections/510046</a>&nbsp;This is a cute heart-shaped slinky that&#39;s easy to print. No support required. The model is 10cm tall and I printed mine using Bambulab Silk PLA. Feel free to try more crazy colors!&nbsp;After printing, gently separate all the coils of the toy: It shouldn&#39;t be difficult to separate the first coil. You can start the process using the tip of a small knife by prying into one of the gaps between the coils.&nbsp;Please ignore the warning about the &#39;floating cantilever&#39; that appears before slicing: the model leaves small gaps by design.&nbsp;You can scale the template in the X or Y direction to make the heart shape bigger. I recommend keeping the height as it is.&nbsp;&nbsp;Below are some of the beautiful prints from the community&nbsp;<figure class="image image_resized" style="width:50.88%;"><img src="https://makerworld.bblmw.com/makerworld/draft/825642/2024-01-30_7ec7538deb44b.jpg"></figure><figure class="image image_resized" style="width:49.77%;"><img src="https://makerworld.bblmw.com/makerworld/draft/825642/2024-01-30_e6bdfd8ecc641.jpg"></figure><figure class="image image_resized" style="width:48.8%;"><img src="https://makerworld.bblmw.com/makerworld/draft/825642/2024-01-30_51fd7f4cddd1c.jpg"></figure><figure class="image image_resized" style="width:48.48%;"><img src="https://makerworld.bblmw.com/makerworld/draft/825642/2024-01-30_69552a529ea14.jpg"></figure>

Heart Slinky

Valentines 

Hiko 3D

**These designs are for personal use only. If you want to get exclusive and free designs also become an official reseller visit my patreon and join!** Hello everyone, I share a new Christmas-themed knitted container: Christmas cat 🐱&nbsp;&nbsp;- It is a simple container where you can store store some candies or anything else you want to give this Christmas. 🎁🍬&nbsp;- Does not need support.&nbsp;Christmas cat is printed in 4 colors with 1 AMS unit. (the eyes painted with black marker, if you have another AMS unit you can add more colors). 🎨&nbsp;I hope you like it and can create christmas cat in different colors with the other Christmas members. ☃️🎅🦌🐱🎄&nbsp;&nbsp;

Christmas Cat - Christmas knitted container

Christmas

NUKDDD

please give a 👍🏻 if you like this, even if you don't download this, it’ll help more people discover this. thanks so much! Follow me for more to come.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/748242/2024-01-10_dbee9ba57f63f8.gif"></figure>This is <a target="_blank" href="https://makerworld.com/en/models/95343#profileId-101704" rel="nofollow noopener">Stumpy</a>'s cousin, Shady. You can mix and match the top and bottom of both shroom create different looking shrooms. You can also use my <a target="_blank" href="https://makerworld.com/en/models/125724#profileId-135739" rel="nofollow noopener">Mini Lantern</a> as the bottom for both shrooms.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/748242/2024-01-06_e6e3e1ed6c2cb.jpg"></figure>&nbsp;It holds up to 39mm diameter LED tea lights, I found these tea lights with timers, just turn it on when you want it to be on and it'll turn on for 6 hours everyday at that time automatically.&nbsp;You can support me by purchasing <a target="_blank" href="https://amzn.to/3vocXMK" rel="nofollow noopener">The lights </a>I used from this link. I may earn a small commission.&nbsp;Printed with Bambu's <a target="_blank" href="https://shrsl.com/4gfvl" rel="nofollow noopener">Basic</a> and <a target="_blank" href="https://shrsl.com/4gfae" rel="nofollow noopener">Matte PLA</a>&nbsp;Fast easy print, no supports, thread 2 parts together with a tea light inside and you're good to go for weeks.&nbsp;Check out <a target="_blank" href="https://makerworld.com/en/models/86208#profileId-92095" rel="nofollow noopener">Teeny</a> and <a target="_blank" href="https://makerworld.com/en/models/124690#profileId-134668" rel="nofollow noopener">Lucky</a> as well!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/748242/2024-01-06_fda2039d67a69.gif"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/748242/2024-01-06_ff73ee1d2891a.gif"></figure>Disclaimer: This model is part of the Creator Program, When you purchase the Lamp Kit 001 or filament through the links provided, creators may earn an affiliate commission as a reward of their work. (The creator program is currently in the trial phase. The application is not yet open to public.)

Stumpy Mushroom Lamp 2

lights

Becks86

Drachenherz mit Ständer&nbsp;Dies ist ein Drachenherz auf einem Fuß. Ideale Deko fürs Zuhause.&nbsp;Viel Spaß beim Drucken&nbsp;Euer Becks&nbsp;________________________________________________________________________________________________________________________________________________&nbsp; Dragon heart with stand&nbsp;This is a dragon heart on a foot. Ideal decoration for the home.&nbsp;Have fun printing&nbsp;Your Becks

Dragon heart with stand / Drachenherz mit Ständer

Dragon

NC-Designs

Ever feeling indecisive about where to eat? Find yourself in a “no, where do YOU want to eat” battle with your spouse? Meet the Dinner Spinner!&nbsp;&nbsp;Make My Sign Info&nbsp;This model is powered by Make My Sign from MakerWorld (www.makerworld.com/en/makerlab/MakeMySign). Using Make My Sign and their SVG import tool, anyone can create additional logos or custom text for things like chores, activities, date night, games to play, etc. Most of the SVGs for the restaurants shown came from either <a target="_blank" href="https://worldvectorlogo.com/" rel="nofollow noopener">https://worldvectorlogo.com/</a> or <a target="_blank" href="https://commons.wikimedia.org/wiki/Category:SVG_logos_of_fast_food_restaurants#." rel="nofollow noopener">https://commons.wikimedia.org/wiki/Category:SVG_logos_of_fast_food_restaurants#.</a>&nbsp;To create your own logos or custom pieces to fit in the box, use the following settings in Make My Sign (these settings will minimize the amount of color changes as well):<ul><li>50mm x 50mm Shape</li><li>10mm Corner Radius</li><li>Medium Border with 0mm Offset</li><li>Thicknesses:<ul><li>Base Plate - 1mm</li><li>Text & Sticker - 0.2mm</li><li>SVG - 0.2mm</li><li>Shapes - 0.2mm</li></ul></li></ul>When you download a custom piece, I recommend downloading the 3MF file as it makes coloring much easier (don't color by face but color by part under the “Objects” tab instead). There are also some tricks I learned like using “Negative Part” type and deleting overlapping parts that come with the SVG to get the exact coloring you want.&nbsp;Assembly Instructions&nbsp;Each of the logos snap into place in the back of the dinner spinner. I recommend either:<ul><li>Printing all pieces except the logos, then one logo, and then scale the logo in ~0.1% increments until you get the fit you want. Then print the rest of the logos at the same scale.</li><li>Printing the logos you want and then the fitment test piece. Depending on that fitment you can adjust the scale in ~0.1% increments until you get the fit you want. Then scale the dinner spinner, spinner, spinner axis, and optional backing plate the same amount.</li></ul>There are spots for two 5mm x 2mm thick magnets (<a target="_blank" href="https://a.co/d/8JerZ9a" rel="nofollow noopener">https://a.co/d/8JerZ9a</a>) to be glued in each corner for putting it on the fridge. I ended up adding a third magnet to each corner that sticks out a little bit to make it more secure to the fridge.&nbsp;There is also an optional backing plate that has a cutout for mounting to a wall if wanted.&nbsp;&nbsp;Thanks for viewing, downloading, rating, etc. Any feedback is welcome!&nbsp;&nbsp;

The Dinner Spinner (20+ Logos Included)

games

JamesThePrinter

This set of squares all rotate independently. Each face has a different pattern to give a varying tactile sensation as you twist and play with it:<ul><li>Spiral</li><li>Sunburst</li><li>Wavy Lines</li><li>Stripes</li><li>Bubbles</li><li>Hexagons</li></ul>&nbsp;This was designed with 0.25mm clearances, so it prints easily with no special settings.&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/JamesThePrinter" rel="nofollow noopener">Buy Me A Coffee</a>&nbsp;The filaments used in the picture above are:<ul><li>MatterHackers Quantum Green Raspberry PLA</li><li>Amolen Purple Blue PLA</li><li>polymaker PolyTerra Pastel Banana PLA</li><li>polymaker PolyTerra Sapphire Blue PLA</li></ul>

Fidget Squares

Fidgets

HG_Design

Puzzle calendar&nbsp;Slide the pieces into the calendar to create the month.Created based on the Bambu contest presentation image. You can change the colors to whatever you want as it is ready for AMS.Before sliding the pieces, it is necessary to thoroughly clean all impurities from the piece until the pieces slide freely. Thanks&nbsp;

Puzzle calendar

office

Xander Designs

Re-purpose your empty BBL spools with this stack-able herb and spice rack carousel. Featuring a carousel base fitted with 608 skateboard bearings or alternatively I have included spacers to use instead of bearings should you not have any laying about. Top mounted handle allowing you to rotate the carousel to view all your herbs and spices. Each container is a multi part print allowing you to customize them with an accent color.  Open top lids with interchangeable sprinkler sizes. Each set of parts have been sliced on separate plates with tailored print settings for each. I recommend to print the containers with PETG filament for food safety and for better hinge mechanics.  Designed to be printed with no supports but it wouldn&#39;t hurt to add a little under the hinge pins. These can be used for herbs and spices or even nuts and bolts etc the choice is endless. Sell my prints commercially by joining my <a target="_blank" href="https://patreon.com/xanderdesigns?utm_medium=unknown&amp;utm_source=join_link&amp;utm_campaign=creatorshare_creator&amp;utm_content=copyLink" rel="nofollow noopener">Patreon</a>Want to say ‘Thank You’  <a target="_blank" href="https://www.buymeacoffee.com/xanderdesigns" rel="nofollow noopener">Buy me a coffee</a>

Spice Rack (BBL Spool recycle) 

Kitchen

sauryyyyy

Cinnamoroll from Sanrio

Cinnamoroll

Easter

lindnjoe

Truck Ornament to hang on the Christmas Tree. 5 individual pieces to print. Glue on the tailgate and the tree will sit in it snug. You could even scale it bigger and make it a gift card holder!

Truck Ornament

Ornaments

franceschellifederico

Inspired by <a target="_blank" href="https://www.thingiverse.com/thing:3130078" rel="nofollow noopener">this</a>, I redesigned it from scratch.Unleash the power of sound with this meticulously crafted 3D model of a high-powered whistle! Perfect for summoning attention or signaling in various situations, this design embodies both functionality and elegance. Whether you're an enthusiast, an adventurer, or simply someone in need of a reliable whistle, this model promises clear, piercing tones and easy printing. Share the joy of creating sound in your projects by downloading and printing this whistle from MakerWorld today!

Loud Whistle v1

Keychains

Websters Creations

use Arachne wall generator to print the small snowflake and little lines.

Teacher Mode Off Christmas Ornament

teacher

MKCAMC

Everything is printed with PLA. It is plenty durable. I printed the rings with 5 walls and 25% infill. The body was printed with 3 walls and 15% infill. Supports are not required. The parts you will need are as follows:14- M3x8 Screws Nylon Twine 8 Gauge Clear Vinyl (very cheap at fabric/craft stores)&nbsp;Assembly is easy. Simply sandwich a piece of the vinyl between the rings, poke holes through the vinyl for the screw holes, then screw it together. Trim off the excess vinyl from around the rings. I used 2 layers of vinyl for the larger side. You could just buy thicker vinyl if you want though.&nbsp;To attach the head it works best to tie one end of the twine to the loop on the drum head, then go ahead and run the twine through all the loops on the head. Set the head on top of the drum body and then route the twine loops down around the hooks on the body. Work around the drum, pulling the twine tight to stretch the vinyl in the drum head. Once the drum head is sufficiently stretched (you'll be able to hear the difference in tone), tie off the loose end of twine and then melt the ends so they don't come loose. Repeat for the other side.&nbsp;You can also add a second piece of twine that runs around the outside of the drums. It can be seen in one of the pictures. This string allows you to adjust the tension on the drum head very easily. If you slide the string up, the tension goes up. If you slide the string down, the tension goes down. In order to attach this string all you have to do is tie one end off next to the middle brace of the drums. Next, tie the string around the other strings that are attached to the drum as can be seen in the picture, working your way around the drum. Once you've made it all the way around the drum, tie the end off on the other side of the middle brace. This will add a great deal of control to the tension of the drum head.

Double Bongo

Music

SnapPrint3D_SuperCrazyPrints

Sign up Membership to get 15+ models every month. All models 3D Print Without Supports and (3MF,STL) file ready! <a target="_blank" href="https://www.supercrazyprints.com/" rel="nofollow noopener">https://www.supercrazyprints.com/</a>&nbsp;Check out my other models: <a target="_blank" href="https://cults3d.com/en/users/Scrazyone_SnapPrint3D/3d-models" rel="nofollow noopener">https://cults3d.com/en/users/Scrazyone_SnapPrint3D/3d-models</a>

Pokemon-Chibi Eevee (NO SUPPORT)

Figurines

BT3D printing

Kiss logo multicolor keychain 3mf file for Bambulab printers with AMS. Already colored in Bambu studio, facing down to the buildplate.For commercial license please join my patreon:<a target="_blank" href="https://www.patreon.com/BT3DDeusCat" rel="nofollow noopener">patreon.com/BT3DDeusCat</a>

Kiss logo multicolor keychain

Key Chains

Black Glovz

Reindeer Christmas Card 

Card Kits

3DMagpie

These started as signs for my own use vendor fairs and pop ups that would show off the multicolor printing capabilities of Bambu Lab printers alongside the prints. I couldn&#39;t find anything remotely like what I had in mind so here we are. The signs measure apprx. 101 mm x 62 mm x 2 mm. The lettering is set to apprx. 1 mm. They do vary slightly particularly in thickness because I designed them in Bambu Studio.&nbsp;These came out great for my needs. My hope is they&#39;ll help out other local sellers, too. Some stuff that may help:<ul><li>I&#39;m new to 3D model development so set expectations accordingly. I have tested most of the versions but not all. Let me know if you bump into any issues, and I&#39;ll do my best to fix it and learn along the way. We all gotta start somewhere!</li><li>The main print profile has all the signs face down for that fantastic surface quality. They look great on the Textured PEI plate. I&#39;d love to see Cool Plate and some of those PEO finishes!</li><li>Euro Print Profile for AMS now available with two raw print file versions for both AMS and layer height changes for non-AMS printers. I have NOT finished test printing all variations yet but wanted to get these files available per request. Please inspect your slices carefully before printing! I&#39;m fighting Bambu Studio to get these to line up on the face. When in doubt you may want to print face up and play with your top surface settings instead.</li><li>I included a second 3MF for easier text editing. USE WITH CAUTION! The text goes whacky as soon as you Edit Text in the By Object view. This is not a me thing…it&#39;s a slicer software limitation we&#39;re working around.<ul><li>Bambu Studio doesn&#39;t offer an align feature, so you have to manually adjust z height and sometimes X and Y angles. It&#39;s even worse if you try to edit face down.</li><li>After you with that battle, if you want the cleanest surface finish you&#39;ll need to flip the sign face down and then do some fine tuning after slicing to get the faces flush. (I found adjusting the Y axis 180 degrees to be easiest.)</li></ul></li><li>For those not familiar, STL&#39;s as always are just the geometry. Each was made with separate objects for the sign and text, so if you do want to download just one or two and manually Paint in Bambu Studio it should be a snap with Fill.</li></ul><figure class="image image_resized image-style-side" style="width: 35.75%"><a href="https://makerworld.com/en/models/417013#profileId-319350" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000050853/design/2024-04-06_373c9ecb61763.jpg"></a></figure><h3>NEW! I&#39;ve designed a <a target="_blank" href="https://makerworld.com/en/models/417013#profileId-319350" rel="nofollow noopener">new set of price signs</a> with built-in stands that are a bit smaller, use less filament, and require less print time. I use a mix of both in my pop-up booth! These are the new ones. &gt;&gt;&gt;</h3>Past updates to this original design:&nbsp;ADDED November 26, 2023: Euro Print Profile as well as 3mf versions for AMS and non-AMS change at layer height in the raw print files. WARNING these are raw files and work in progress in response to request. Please check your slices carefully for any errors. Comments alerting me to any issues are welcome so I can fix them!&nbsp;REVISED November 2, 2023: Fixed floating regions on the $12 and $25 signs thanks to a heads up they were failing from a commenter. I&#39;ve replaced the main Print Profile and Face Up 3MF raw file for customization. I also replaced those two STL&#39;s with revised versions.

Price Signs with Oval Stands (Dollar & Euro)

store

ARTICAT

For commercial license and new models, join our Patreon!&nbsp;Introducing the "Infinity Lamp," a groundbreaking 3D printed luminary that redefines personalization and versatility in lighting design. &nbsp;This innovative project allows you to easily swap out the luminary or design at any time by simply removing and replacing the design panel in the lamp's slot. The result is a stunning visual effect that offers endless possibilities.&nbsp;Inside the "Infinity Lamp," we've incorporated RGB LEDs, enabling real-time customization with a single lamp. &nbsp;You can change the lamp's appearance instantly by swapping out different design panels to match your mood, occasion, or decor. This "Infinity Lamp" comes with a bundle of three design panels featuring Santa Claus and the Grinch, perfect for the Christmas season.&nbsp;Assembling the lamp is a breeze – you only need to 3D print the parts and fit them together with adhesive. &nbsp;If the community embraces this project, we're excited to offer a wide range of design panels for various themes and occasions in the future. &nbsp;Experience the future of customizable lighting with the “Infinity Lamp” ! &nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/152454/2023-10-28_93223039e9af9.png"></figure><h2> </h2><h2>ATTENTION!!</h2>If you use my profile to print the box parts, please note that the "Middle_Front_White" and "Middle_Front_Black" parts cannot be printed via AMS due to their size and the lack of space for the purge tower. You can bypass printing one at a time by changing the type to "Negative part" for one and then doing the same thing for the other part.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/152454/2023-10-28_0d9b870b0521c.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/152454/2023-10-28_e12c5d0457c7e.png"></figure>&nbsp;&nbsp;Tips for better print results:→ Color Print Order: Lighter to Darker → Textured PEI Sheet→ Layer Height: 0.2→ First Layer Flow Ratio: 1.08→ Wall Generator: Aracne→ Wall Transitioning Treshold Angle: 50º&nbsp;&nbsp;Materials:→ Glue for the box parts and for the LED's to ensure they don't come off→ Aluminium tape on the back part to help diffuse the light from the LED's→ RGB LED strip and bluetooth controller→ Soldering iron to make the hole in the box (optional because it's possible to configure the hole in Bambu Studio before printing the piece)

Infinity LED Lamp - Christmas Bundle (+3 panels)

light

K2_Kevin

This is a unique PTFE tube release button AMS Buffer &amp; Hubs.Ever have issues not being able to feed or retract the filament after a print or during multiple changes. Straightening out the PTFE tub as it exits the buffer or hub has helpped resolve this issue for me.&nbsp;This model isn&#39;t just a tool for removing the PTFE Filament Tubes from the AMS Buffer or Hub conveniently; it aids better filament retraction. The buttons, armed with PTFE Support, serve to correctly align the PTFE tube, significantly reducing the chances of feeding problems. Provides another efficient answer to filament feeding obstacles.&nbsp;Don&#39;t forget to Follow! Thank you so much for your Downloads, Like and BOOSTS!<h4>FYI: The AMS Buffer has ONE PTFE Input. The AMS Hub is the unit with FOUR PTFE Inputs.</h4>AMS BUFFER:<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000051579/design/2023-12-18_664e512408d77.jpg">&nbsp;AMS HUB (4-ports):<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000051579/design/2023-12-18_0eec6fd73e5e2.jpg">&nbsp;&nbsp;<h3>Check out a few other helpful accessories for smooth operation.</h3><a target="_blank" href="https://makerworld.com/en/models/52179#profileId-53992" rel="nofollow noopener">AMS Buffer Block</a><a target="_blank" href="https://makerworld.com/en/models/52179#profileId-53992" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000051579/design/2024-04-01_94be6ea3d1f74.png"></a>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/51579#profileId-105225" rel="nofollow noopener">AMS Support Button</a><a target="_blank" href="https://makerworld.com/en/models/51579#profileId-105225" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000051579/design/2024-04-01_e1bb7a4ccb38c8.png"></a>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/93011#profileId-99425" rel="nofollow noopener">PTFE Coupler Support</a><a target="_blank" href="https://makerworld.com/en/models/93011#profileId-99425" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000051579/design/2024-04-01_429aa1362b6ba8.png"></a>&nbsp;&nbsp;&nbsp;&nbsp;  &nbsp;

Bambu AMS Hub & Buffer PTFE Support Button

tools

mcgybeer

Pumpkin Spinner!Print in place, easy and quick to print. A cool seasonal fidget to enjoy during Halloween.&nbsp;<figure class="media"><div data-oembed-url="https://youtube.com/shorts/1O0_qQfCCwk"><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=1O0_qQfCCwk"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://www.youtube.com/embed/1O0_qQfCCwk" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>&nbsp;Tip: If you feel it too tight or too loose, or even if you want to scale them, you can play with the XY compensation in the slicer to get the right tolerances.&nbsp;Check here for <a target="_blank" href="https://www.mcgybeer.xyz/commercial-license" rel="nofollow noopener">Commercial License</a>

Pumpkin Spinner

Halloween

R C 3D

PRINT PROFILES:These are the print profiles that I've tested and can confirm to work well. Any profiles not listed below are not tested by me, and I cannot confirm whether or not they will work well. I recommend the Spool Adapter - w Slots. This one has the latest features and works the best of the three in my opinion.<ul><li>Spool Adapter - 200mm (Use at your own risk. This was requested, but I'm not 100% sure how well it will perform over time. Once I've had some time with it I will update this.)</li><li>Spool Adapter - w Slots</li></ul>&nbsp;SUMMARY:This spool adapter was designed to hold the cardboard spools and provide several features that assist in the ease of operation when using cardboard spools in the AMS. Here are the issues it's designed to address:<ol><li>When the walls of a cardboard spool become bent or deformed, they don't ride in the guides properly and end up causing issues in the AMS. This provides solid, sturdy walls that don't bend or deform.</li><li>The lip of the spool adapter is designed to provide a large enough surface contact against the rollers that it maintains traction. This isn't meant to snap onto the edge of the spool, but rather act as its' own spool end. The cardboard may be smaller in diameter, and this should still work great.</li><li>If you have issues due to spool weight, this has a core with a lid that can be used for desiccant or weights of some sort.</li><li>Recently I've discovered that this also works on some plastic spools such as esun which often have feed issues in the AMS. Based on feedback, this completely solved the issue for several people.</li></ol>To use the spool, simply drop your spool onto the spindle half. Screw the nut half onto the spindle and ensure your width will work in the AMS guides. Finally, screw on the locking nut to secure the end in place. To use desiccant or weights, simply drop them into the reservoir and screw on the cap.&nbsp;This has been confirmed to work with Overture, Polymaker, Elegoo, and a few other brands I'm not familiar with. With overture, you may have to crank down on the nut half to get the width right. For storing, I simply place the end in the cardboard hole and the sides hold it in place.&nbsp;CHANGELOG:&nbsp;UPDATE (10/25/23):I've added a second print profile. It will have “Thin” in the description notes or whatever. I'm adding this because some people are having issues with the width when using overture spools. I've seen several that were successfully installed, but for those that are having trouble, this one should be just a touch more narrow and may be what you're looking for.&nbsp;UPDATE (11/3/23):I'm adding another print profile for a spool with a smaller overall diameter. I've reduced it by a little over 1mm, which based on the feedback I've gotten, should solve the issue of the spool being too large overall for the new AMS version. If you have this issue with the other spools, give this a shot and let me know what you think.&nbsp;UPDATE (12/15/23):I added (2) new print profiles with an updated version of the spool adapter. I'm going to leave the other profiles up for now, but once I'm happy with the updates I'll be removing the other print profiles. The files will still be available in the raw files section, but I prefer having fewer print profiles.&nbsp;The spools was updated with little overhangs around the rim of the spool. I had a few spools where the cardboard would swell or deform, pulling away from the plastic sidewall. I added these little overhangs to help hold onto the sidewall and prevent it from pulling away. When it pulls away from the plastic, it creates rubs the side of the AMS guides and causes additional friction or snags the spool altogether. When I installed Polymaker into these, the overhangs just barely fit over the edges and held it in pretty well. If the spool has thick sidewalls, you'll have to push down on the sidewalls where the overhangs are at. I used a flathead screwdriver to shove the cardboard under the overhang.&nbsp;I also added some text, a Bambu logo, and RC3D. The colored version actually doesn't take much longer than the uncolored version, so don't be afraid to run that AMS now that cardboard is no longer an issue.&nbsp;UPDATE (1/9/23):Removed the Bambu reference and logo. Removed the small finger that were meant to hold the cardboard in place. Based on feedback, those weren't as well received, so I did away with them. If you'd like the model with the little nubby things, let me know.

Universal Cardboard Spool Adapter by RC3D

Bambu Stuff

mail.iou

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Pink Transmission Distance: 8 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Basic Jade White Transmission Distance: 5Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Pink At layer #12 (1.04mm) swap to Beige At layer #18 (1.52mm) swap to Jade White for the rest.