Kreator.Cam

Encrust3d

<p>These are six tubes connected together to make a set for shrimp and fish to use for shelter. This model should be printed in PETG or ABS as PLA is not recommended for submerged applications. These tubes are thin enough that there is no infill throughout the whole design to ensure the model does not float and stays in place. Scale these tubes down for a smaller shrimp shelter and up for larger fish like bristlenose plecos. </p>

Aquarium Shrimp Tubes

fish tank

aPyroDesign

<p>Attention:  If printing this spinner, please use version V2 for easier support removal. </p><p>&nbsp;</p><p>&nbsp;</p><p>This Infinite Slinky Animated Fidget Spinner is designed to be printed as a multicolor print using the AMS. It can also be printed as one piece.</p><p>&nbsp;</p><p>This fidget spinner is unlike a standard spinner. The shapes on the spinners are frames of animation. When you spin the spinner and view the spinner through a smartphone camera, the animations come to life. There are also two other ways to view the spinners. The instructions are below for the 3 different viewing methods.</p><p>&nbsp;</p><p>Smartphone Camera Instructions: Click <a target="_blank" href="https://spinnermation.com/pages/cell-phone-method" rel="nofollow noopener">HERE</a></p><p>&nbsp;</p><p>Strobe Light App Instructions: Click <a target="_blank" href="https://spinnermation.com/pages/strobe-method" rel="nofollow noopener">HERE</a></p><p>&nbsp;</p><p>Handheld viewer: Click <a target="_blank" href="https://spinnermation.com/pages/handheld-spinner-viewer" rel="nofollow noopener">HERE</a></p><p>&nbsp;</p><p>&nbsp;</p><p><strong>Guides</strong></p><p>Easy assembly guide and easy support removal Videos: Click <a target="_blank" href="https://drive.google.com/drive/folders/1zjWD1vB6mJ9Tk475IS7QAs6kHIoJ6YSH?usp=drive_link" rel="nofollow noopener">HERE</a></p><p>&nbsp;</p><p>&nbsp;</p><p><strong>You will need an r188 bearing for the spinner.</strong></p><p><strong>Recommended bearings from Amazon: Clic</strong>k <a target="_blank" href="https://www.amazon.com/dp/B095GTJC1R?linkCode=ssc&amp;tag=onamztravi04a-20&amp;creativeASIN=B095GTJC1R&amp;asc_item-id=amzn1.ideas.1JB9SWU6KEPUY&amp;ref_=aip_sf_list_spv_ons_mixed_d_asin" rel="nofollow noopener">HERE</a></p><p>&nbsp;</p><p>Filaments used in this project.</p><p>&nbsp;</p><p>Black PLA Basic: Click <a target="_blank" href="https://us.store.bambulab.com/products/pla-basic-filament?variant=41078274654344" rel="nofollow noopener">HERE</a></p><p>&nbsp;</p><p>Galaxy purple for the stairs: Click <a target="_blank" href="https://shrsl.com/4hplx" rel="nofollow noopener">HERE</a></p><p>&nbsp;</p><p>Silver Silk for Slinkies: Click <a target="_blank" href="https://shrsl.com/4hpm6" rel="nofollow noopener">HERE</a></p><p>&nbsp;</p><p>All links are Affiliate links</p><p>&nbsp;</p><p>&nbsp;</p><p>Files included:</p><p>&nbsp;</p><p>3MF file that is ready for AMS printing.</p><p>&nbsp;</p><p>Top and Bottom Cap files.</p><p>&nbsp;</p><p>Bearing Top Cap. This part is to lock in the bearing.</p><p>&nbsp;</p><p>Bearing top tool. This will make it easier to lock on the bearing top cap.</p><p>&nbsp;</p><p>Solid file for single extruders.</p><p>&nbsp;</p><p>&nbsp;</p><p><strong>Interested in selling my spinners? Check out my Patreon for more info. Click </strong><a target="_blank" href="https://www.patreon.com/APD" rel="nofollow noopener"><strong>HERE</strong></a></p>

Infinite Slinky Stairs Zoetrope Spinner

fidget

m.cody.sims

<p>Just a good Mando helmet!</p><p>&nbsp;</p><p>My profile doesn&#39;t have support on the inside of the helmet because I have found it didn&#39;t really help that much with the quality and it used a lot of filament. the very center of the inside will be rough because of this but it hasn&#39;t been an issue for me.</p><p>&nbsp;</p><p>For those wondering what I use for a face sheild I use a Hobart 770580 Face Shield Replacement Lens, Shaded from Amazon. I cut it to shape and use a little bit of hot glue along the front and near the temples. That seems to be enough. I would recommend getting air soft helmet padding for a custom fit and comfort.</p><p>&nbsp;</p><p>If you like my work, please consider supporting me by boosting my model or <a target="_blank" href="https://www.buymeacoffee.com/m.cody.sims" rel="nofollow noopener">buying me a coffee</a>!</p>

Mandalorian Helmet One Piece

helmets

holonda3d

<p><span style="color:rgb(55,65,81);font-size:16px;">Ich habe diese Behälter konstruiert, weil ich eine schöne Aufbewahrungsmöglichkeit für meine verschiedenen Klebstoffflaschen an meiner Ikea Skadis-Wand haben wollte.</span></p><p><span style="color:rgb(55,65,81);font-size:16px;">Gerne mit Baum-Support drucken.</span></p>

Behälter Ikea Skadis

peg board

maegu_

<p>Wall Art  - Hummingbird with Flowers and Bee's</p>

Wall Art - Hummingbird and Flower

wall art

forceAlmighty

Golf Tee

golf

BeeTee 3D

<p>This is an LED lamp of Bluey from the phenomenal kids (and adults!) show, Bluey.</p><p>&nbsp;</p><p>&nbsp;</p><p>&nbsp;</p><p>This model has more than four colors, so you will need more than one AMS for the full effect.</p><p>&nbsp;</p><p>&nbsp;</p><p>&nbsp;</p><p>Print the whole family!</p><p>Bluey: https://makerworld.com/en/models/98734<br>Bingo: https://makerworld.com/en/models/98737<br>Bandit: https://makerworld.com/en/models/98738<br>Chilli: https://makerworld.com/en/models/98736<br> </p><p>&nbsp;</p><p>&nbsp;</p><p><strong>How do I make this thing?!</strong></p><p>Easy!  Just follow these general steps, and you&#39;ll be lighting up your life in no time.  Pay attention, as there will be a quiz later.</p><p>&nbsp;</p><ol><li>Download the model to your computer or open it in the Handy app.  I suggest downloading it and opening it so you can remove the purge line (Google is your friend here).  I also strongly suggest using the included profile, as it contains many little tweaks to prevent problems that are common with these types of lamps (gaps, wisps, separation, etc.)</li><li>Confirm whether you have enough AMS&#39;s to handle all of the colors.  I do my best to keep my lamps to 4 colors or less, but sometimes that&#39;s just not possible, and a second AMS will be needed.  Alternatively, you can build in pauses and conduct manual filament swaps, but you&#39;ll need to research how to do that on your own, because I&#39;m not good at that.</li><li>Ensure your filament colors are in the correct AMS slots that corresponds to the model.  Hint: I generally arrange my colors in alphabetical order, because I&#39;m weird like that.  Just be cautious of wildcards like &#34;light blue&#34;.</li><li>All of my models come with two different back plates.  One will have a hole for those of you that want to hang the lamp on a wall.  The other will not have a hole, and that&#39;s intended for those of you who will be placing the lamp on a desk or a table or a cat.  You do NOT need to print both back plates (or do, I don&#39;t care, I&#39;m not your mother).  Pick whichever one you want.  Some lamps will also come with a base.  This is to keep your lamp from tipping over like a drunk toddler if you&#39;re placing it on a flat surface.  If you&#39;re hanging it on a wall, you don&#39;t need the base.</li><li>I strongly recommend using a textured PEI plate, as that will do an excellent job in hiding the print lines, and that&#39;s what these prints are tweaked for.  But you can use whatever fancy plate you want -- again, I&#39;m not your mom.  </li><li>Once you&#39;ve got your AMS set up and are ready to go, hit that big ol&#39; PRINT button for the lamp face and then your back plate. I suggest disabling Flow Calibration.</li><li>Go make a sandwich.</li><li>You should now have the lamp face and your back plate of choice, and it&#39;s assembly time!</li><li>This first step is optional, but I would suggest picking up aluminum (or aluminium for some reason if you&#39;re British) foil tape.  Yes, it comes in tape form!  Line the inner side of the back plate with the sticky stuff, as it will help tremendously in making your light brighter and with a more even and consistent light.  I personally tear off small strips, apply, and then flatten/smooth it out with the edge of a credit card, and repeat until the entire side is shiny silver.</li><li>Next you&#39;re going to want to buy yourself some LEDs.  The options here are many and varied, and I can&#39;t decide for you (see mom comment above).  Decide what types of light you want.  Do you want basic white light?  Great!  Do you want cool white or warm white?  Do you want it to flash or dance to the music?  Do you want a switch?  Do you want a remote?  Do you want it to be USB or higher voltage?  Have you changed your mind and want it to be multi-colored or able to change color to the seasons or your mood?<ol><li>What I can do is make some suggestions.  First, there are several kinds of LEDs that are typically used in these types of lamps.  The first is a basic LED strip, which is a roll of circuit board tape with a sticky back-end.  These are the simplest and easiest to use.  Next is what&#39;s called a COB strip, which is basically the same, but instead of an LED every inch, it has a solid band of light.  Then there&#39;s neon COBs, which are self-explanatory.  There&#39;s also LED dome bulbs, which you would apply directly to the backplate, but would require soldering.</li><li>Whatever you choose, you want to look for the following: <br>- A way to power the thing.  USB, DC, solar panels, steam engine -- doesn&#39;t matter, just as long as you can turn it on and off. <br>- A way to trim the length.  Most LED strips have areas on them that are safe to cut with scissors as long as you cut precisely along the indicated area.  Once you make that cut, the part of the LED strip that&#39;s still connected to the power will function, but the remainder will no longer function (there are ways to repower them, but generally require soldering and/or special clips and new controllers.  Google is still your buddy here).  <ol><li>A way to secure the strip to the inside of the lamp.  Most LED strips come with an adhesive side, but not all -- make sure you know what you&#39;re buying.  In a pinch, hot glue will do the trick. </li><li>An LED strip length of 1m is usually sufficient, but some lamps do exceed that length.</li><li>Test EVERY strip before you apply it.</li></ol></li></ol></li><li>All of my lamps come with a hole in the side of the case that&#39;s just big enough for threading through the LED strip (if you don&#39;t want the hole, you can cover it with a small piece of electrical tape).  Thread the USB cable (or whatever power source you chose) from the inside through to the outside so the connecter is dangling just outside the lamp.  Then peel off the sticky backing of the LED strip, and start applying it to the inner wall perimeter of the lamp, maintaining steady pressure to ensure good adhesion.  Try to keep it as straight as possible.  Use a credit card or other narrow instrument to help get it into any nooks and crannies the lamp has.  Continue along the entire inner perimeter until you come back around to the outlet hole, and then make your cut.  Plug in the power to ensure the light still works.<ol><li>This is optional, but I suggest putting a dab of hot glue every inch or so to secure the strip extra tightly to the inside of the case.</li></ol></li><li>Now you&#39;re ready to close the lamp up.  Take the back plate you printed earlier and line it up with the front plate.  All of my back plates have a lip to help secure it, and it is a tight friction fit.  This helps keep the two halves together without needing to glue them, which allows you to open it back up in case you need to fix the LEDs.  Once it&#39;s lined up, squeeze the two halves together, ONLY PUTTING PRESSURE ON THE OUTER EDGES.  If you squeeze the lamp directly on the thin face or back plate, you&#39;ll put your whole hand through it like a gorilla.  <ol><li>Here&#39;s the method I use:  I place the edge of the box between the balls of my thumbs, lock the rest of my fingers together above it, and then squeeze.  As long as you&#39;re only squeezing on the EDGE, it can take a surprising amount of force.  I repeat this around the entire edge of the lamp until I have a tight fit.  Occasionally, for any tricky areas, a little sanding/trimming/clipping of the lip can be helpful.</li></ol></li><li>Lucky number 13, and you&#39;re done! </li></ol><p>&nbsp;</p><p><strong>Quiz time </strong><i><strong>(did you think that was a joke?)</strong></i><strong> </strong></p><p><br>1. What&#39;s the suggested way of opening the lamp file? <br>2. What do you need to ensure is in the right order before printing? <br>3. I&#39;m not your _______? <br>4. Which back plate should you use for which scenario? <br>5. What is the recommended plate you should use for lamps? <br>6. What kind of sandwich did you make? <br>7. What type of LEDs did you decide on, and what should you do before applying it?<br>8. What should you NEVER apply pressure to or squeeze when joining the lamp halves together?<br>9. Did you have fun? </p><p>&nbsp;</p><p>Feel free to join me on Patreon @ BeeTee 3D for more, including exclusive lamps!<br> </p><p>&nbsp;</p>

Bluey LED Lamp

backlight

valerio.tarabella

<p>The basket has dimensions Ømax=160mm h=65mm</p>

Basket with intricate texture

niknaks

Schidter

<p>I hope you enjoy the model I've had fun tinkering with. Please see some notes below which might improve your experience:</p><p>&nbsp;</p><p>No outside materials required! Rubber bands and glue are totally optional.</p><p>&nbsp;</p><p>When removing the card from the bed, do so gently or the connections may break.</p><p>&nbsp;</p><p>If the plane doesn't behave the way you want it to, bend the foils. For my prints, bending the foils on the rear wing downward made it fly nice and smoothly.</p>

DIY Glider Kit Card - Flies Great!

toys

Stefan_schmid91

<p>Skadis Spool Holder with Wood 23mm</p><p>Platte 1 - right </p><p>Platte 2 - left</p><p>Platte 3 - 10x chop</p>

Skadis - Filament Spool Holder - Wood 23mm

filament

benlevi

<h2>BLV - AMS Riser for X1C V3.1 Final</h2><figure class="table"><table><tbody><tr><td style="background-color: hsl(0, 0%, 30%)"><h3><span style="color: hsl(0,0%,100%)">Introduction</span></h3></td></tr><tr><td><p>I&#39;m Ben Levi, and I want to talk to you about this BLV AMS Riser that I designed:<br>So, when the AMS is sitting on top of the printer, you can&#39;t really see what the printer is doing, and you can&#39;t even open the top glass cover to let some air in when you&#39;re printing High temp stuff. basically, something that will hold the AMS and free your Glass top cover will be a good solution for that. Now I&#39;ve seen some similar AMS risers before, but none of them really wowed me.. i think..</p><p>That&#39;s why I decided to come up with this sleek BLV AMS Riser design, easy to use, easy to put together, and reliable. I even added two handy drawers for your tools and stuff, a special shelf that can hold up to 4pcs Build Plates, built-in Dual LED strips. Sure, it took me a while, but I got it (almost..) done.</p><p>As some of you may know, I love contributing to this wonderful community, which is why I chose to share with you my project without any fee or money. Among other things, I&#39;ve also given you access to the original CAD files (F3D,STEP) so that you can easily make changes, add, and improve as you see fit. Please, if you publish a remix, make sure to link it to the original project as a remix so that others can benefit from your effort. I kindly request not to use the files for commercial purposes without explicit permission from me.</p><p>&nbsp;</p><p>Thanks,<br><strong>Ben Levi</strong></p><p><a target="_blank" href="https://www.paypal.com/paypalme/BenBLV" rel="nofollow noopener">If you want, buy me a beer </a>:)</p><p>&nbsp;</p></td></tr></tbody></table></figure><figure class="image image_resized" style="width: 58.95%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-09-25_370cc55ef0c1d.png"></figure><h2>Main features</h2><p>These are just a few design features I&#39;ve planned. If you have more ideas, please share them with me, and I can incorporate them into the design. Also, feel free to add remixes (CAD files are available for download).</p><ul><li>Easy installation</li><li>Dual LED strip<br>installed in optimal angle for LiDAR.</li><li>AMS riser</li><li>Top glass Holder</li><li>2 drawers for tools (with version for tools)</li><li>4 x Build Plates holder</li><li>Rubber Gasket for the glass</li><li>Customised Panels</li><li>access to original buttons</li><li>No screws required</li><li>CAD files available (F3D,STEP)</li></ul><figure class="table"><table><tbody><tr><td><p>&nbsp;</p><figure class="image image_resized" style="width: 92.39%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_18d41f48cf37f.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_a237ff37d0da5.png"></figure></td></tr></tbody></table></figure><h2> </h2><h2>How to print and where to begin?</h2><p>I must admit, if you&#39;re in search of a quick two-hour print and you&#39;re finished, this may not be the right place for it. To initiate and successfully complete this project, a considerable amount of filament and time investment is necessary. Here are the essential resources you&#39;ll be required to invest:</p><figure class="table" style="width: 70.13%"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td><p style="text-align: center"><strong>Printing Time</strong></p></td><td>70~85 print hours - including color switching!</td></tr><tr><td><p style="text-align: center"><strong>Printer</strong></p></td><td>X1 Carbon, P1S, P1P, X1 or Other + AMS (Optional).</td></tr><tr><td><p style="text-align: center"><strong>Filament</strong></p></td><td><ul><li>2 kg - PLA/PETG Main filament color (GREY)</li><li>0.5 kg - PLA/PETG Secondary filament color (GREEN)</li><li>14 g - PLA/PETG Black filament for text (BLACK)</li><li>34 g - TPU flexible filament for your Gasket (BLACK)</li></ul><p>* Feel free to choose your own colors.</p></td></tr><tr><td colspan="2"><figure class="image image_resized" style="width: 98.07%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-04_77b29f1dbec36.jpg"></figure></td></tr></tbody></table></figure><p>I tried to keep the project in as few parts as possible and minimize the use of screws and glue. I&#39;ve also included three images that show all the parts and file names to help you easily know what to print and what to remove. <strong>Click on the pictures to enlarge.</strong></p><figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_5539d72c1e42.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_1698b67225759.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_34f66213cbfb2.jpg"></figure></td></tr></tbody></table></figure><p>&nbsp;</p><p>&nbsp;</p><h2>Printing settings</h2><p>Under each file name, I&#39;ve added a recommendation on how to print that component. Please note that these are just suggestions, and you can choose the filament type, infill percentage, and wall count according to your preferences.</p><p>Additionally, I&#39;ve attached an image below that illustrates how to orient each component on the print bed for optimal results <strong>(click to enlarge):</strong></p><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_c8a5b6a960393.jpg"></figure><p>Please note that you will find in also wonderful print profiles from the community too :)</p><h2> </h2><h2>Assembly instructions</h2><p>I think the best way to demonstrate the assembly is through a video. Therefore, I&#39;ve created a short animation video for you that illustrates the assembly process and the sequence of the project&#39;s components. Enjoy:</p><h3> </h3><figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_f7b5fb7649351.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_0604a5a98bf6d.png"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_4edcdff3d535e.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_f3764fb52c104.png"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_7b9abe53ec9f3.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_611a02308f5c5.png"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_d8d2275f63acd.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_f59c54b41a2bd.png"></figure></td></tr></tbody></table></figure><h3>Buttons assembly:</h3><p>Please print x2 Button insert.stl files and assemble as the photo below:</p><p><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-09-29_89172a00d321c.jpg"></p><p>&nbsp;</p><h2>Recommended Remix:</h2><ul><li><a target="_blank" href="https://makerworld.com/en/models/27690#profileId-24067" rel="nofollow noopener">Front Panels for P1P remix</a></li><li><a target="_blank" href="https://makerworld.com/en/models/28098#profileId-24385" rel="nofollow noopener">new Drawers with Clean look and version with Text</a></li><li><a target="_blank" href="https://makerworld.com/en/models/28948" rel="nofollow noopener">Spool Holder add on on the rear</a></li><li><a target="_blank" href="https://makerworld.com/en/models/29315" rel="nofollow noopener">Honeycomb panels for the sides</a></li></ul><h2>Links:</h2><ul><li><a target="_blank" href="https://s.click.aliexpress.com/e/_Dk1tOEL" rel="nofollow noopener">COB 5mm Dimmable LED strip</a> suitable to the project.<br>please make sure to choose: “white” and “Strip-USB Button” options.<br> </li></ul><h2>Colors ideas:</h2><figure class="image image_resized" style="width: 59.65%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_5f2218eae1ea7.jpg"></figure><h2>How to download CAD (f3d,Step) files:<br><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-03_16ad19d8f61ba.jpg"></h2><h2> </h2><h2>Selected User makes:</h2><figure class="table" style="width: 90.79%"><table class="ck-table-resized" style="border: 1px solid hsl(0, 0%, 100%)"><colgroup><col><col><col></colgroup><tbody><tr><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-04_3aaa07d5a3c1e.png"><figcaption>click to enlarge</figcaption></figure></td><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 86.34%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-03_f5f9b0b8d1086.jpg"><figcaption>click to enlarge</figcaption></figure></td><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-03_ee05726581f83.jpg"><figcaption>click to enlarge</figcaption></figure></td></tr><tr><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_8efeadcf004be.jpg"><figcaption>click to enlarge</figcaption></figure></td><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 79.61%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-04_c0866329e4121.jpg"><figcaption>click to enlarge</figcaption></figure></td><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 92.92%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_f106d497bd601.jpg"><figcaption>click to enlarge</figcaption></figure></td></tr><tr><td style="border: 1px solid hsl(0, 0%, 100%)" colspan="3"><figure class="image image_resized" style="width: 94.67%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_d8fbe88a9ea.jpg"><figcaption>click to enlarge</figcaption></figure></td></tr><tr><td style="border: 1px solid hsl(0, 0%, 100%)" colspan="3"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_0d0d9ff1ec084.jpg"><figcaption>click to enlarge</figcaption></figure></td></tr></tbody></table></figure><p>&nbsp;</p><figure class="table"><table><tbody><tr><td style="background-color: hsl(0, 0%, 60%)"><h2><span style="color: hsl(0,0%,100%)">Changelog</span></h2></td></tr><tr><td><ul><li>19/9/23 - published first prototype. not meant yet to print.</li><li>19/9/23 - uploaded v1.1 with angled glass holder and fixed Size drawer, stronger rear part.</li><li>23/09/23 - Left/Right/Rear Panel edges optimization for better surface finish.</li><li>24/9/23 - Huge update v1.2 !<ul><li>Extreme optimization to main parts, now it&#39;s 6 parts but much less support and faster to print.</li><li>Added wire channel for the LED&#39;s wires.</li><li>Added lock pins to TPU gasket.</li><li>new secure method to front and rear parts in addition to the dovetails.</li><li>Optimization to all decorative panels.</li><li>2 x Button frame cover with logo for P1P and P1S.</li><li>increased glass holder degrease to prevent movements.</li><li>Deeper AMS leg&#39;s socket, securing the AMS in it&#39;s place.</li><li>Added special drawer with accessories. it has a place for the H1.0-H2.0 HEX keys, 2 x Hotends, 5 cutters, 4 x wipers, screws, glue and needle.</li></ul></li><li>25/09/23 - updated new version 1.3 with measurements fix.</li><li>29/9/23 - added 2 remixes: clean front drawer, drawers with text, Dash front parts for P1P.</li><li>29/9/23 - added Button insert.stl + button images assembly.</li><li>30/9/23 - remix section update! spool holder, honeycomb panels added.</li><li>4/10/23 - New optimized slicing profile! faster, less filament, better support!</li><li>02/03/24 - added more support to side model.</li><li>04/04/24 - changed print profile for wider base.</li><li>22/05/24 - optimized structure for vibrations.</li><li>31/05/24 - changed Internal structure to be more rigid.</li><li>29/06/24 - added BOM items<br> </li></ul></td></tr></tbody></table></figure>

BLV - AMS Riser for X1C / P1P / P1S V3.1 Final

X1C Upgrade 

Terion

<h3>Download, load and print!</h3><p>Every filament and printer is different. To get the best out of your printer, you need specific settings, which means a particular nozzle temperature. That is the time when Temperature Tower comes in handy. </p><p>Every level of this tower is printed with different nozzle temperatures. There are several tricky parts on each level, where you can see differences between temperatures, such as overhangs, stringing... By comparing levels, you can find your optimal printing temperature.</p>