Kouki Monster

Mr.Rod

I´m proud to present to you a revolution when it comes to a product of these specs, this is not something new as an invention, but is something that will save the whole DIY, 3D Printing scene community lot of cost and time effectiveness when it comes to start new projects, prototypes or even working on existing ones, and this is only counting with these LED Stripe connectors, there´s even yet more to come, with even more revolutionary electro-mechanical projects.&nbsp;THANKS SO MUCH FOR ALL THE SUPPORT AND FEEDBACK ____________ Mr.Rod&nbsp;REMEMBER FROM THIS PAGE YOU CAN ONLY DOWNLOAD AND PRINT THE 2PIN LED STRIPE STRAIGHT LONG CONNECTOR, TO GET SOME OF THE OTHER VERSIONS SHOWCASED IN THIS PAGE TAKE A LOOK TO SOME OF THE KITS BUNDLES OF LED STRIPE CONNECTORS IN MY PATREON BIO.&nbsp;REMEMBER YOU CAN GET THIS LED STRIPE CONNECTORS KITS AND THE PRODUCTS THAT ARE YET TO COME BY 2 WAYS: <ul><li> BUYINGH THE WHOLE PACKS OFFERED AT PATREON SHOP (Not reccomended) </li><li>BY BECOMING A MEMBERSHIP OF MY PATREON PAGE BY PAYING A MONTHLY SUSCRIPTION (That you can cancel whenever you want). LINK:</li></ul>Patreon Membership and products link: <a target="_blank" href="https://patreon.com/DIYElectricalQuickPlugs?utm_medium=unknown&amp;utm_source=join_link&amp;utm_campaign=creatorshare_creator&amp;utm_content=copyLink" rel="nofollow noopener">https://patreon.com/DIYElectricalQuickPlugs?utm_medium=unknown&amp;utm_source=join_link&amp;utm_campaign=creatorshare_creator&amp;utm_content=copyLink</a>&nbsp;Instructions, Safety and Assembly Guide Manual Included for this project.

NEW! 3D PRINTED LED STRIPE QUICK 2 PIN CONNECTOR

Electronics

Techro3D

Classic bird feeder | octagonal house | with mounting bracket| By Techro3D&nbsp;<ul><li>Water drainage.</li><li>Mounting bracket.</li><li>Suspension point for a fatball or other bird food.</li><li>Bottom also suitable for placing food.</li><li>Removable roof.</li><li>100% printable.</li><li>No glue required, but can be used just to be sure.</li></ul><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000453035/design/2024-05-04_a142276d19e56.png"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000453035/design/2024-05-04_bf6862079a949.png"></figure>

Classic bird feeder, octagonal house.

Outdoor/Garden/Patio

PSG by Isi Serrati

Banquet for mounting and refilling RC shock absorbers. Removable. Allows shock absorbers of various sizes and diameters of electric RC model cars (buggies and on-road cars) to be held vertically.

mounting and refilling RC shock absorbers banquet 

RC/Drone

3DeepPrinting

Legos Sign wall artDesigned by myself in Fusion 360&nbsp;0.28 layer hight10% infill gyroid3 walls&nbsp;&nbsp;

legos Sign wall art

Wall Mounted

NotTooShabbyCreations

Horror movie character inspired light box.Perfect for the horror movie lover or as Halloween decoration.For the project I used a USB cable with a switch and 5v cool white led strip.Some soldering skill required!!!

Horror movie tile light box

VDay/Gifts/Couples/Romance

Marc Elbichon

➡️ Checkout the entire <a target="_blank" href="https://makerworld.com/en/u/3864875302/collections/477489" rel="nofollow noopener">Ikea Skadis Collection</a> !&nbsp;I love Ikea Skadis system, but I needed a stronger version to hold some heavy stuff. I made a heavy duty version!&nbsp;Comes in single print or separate as regular panel + spacer (Can be usefull if you already have some panels printed, otherwise go with the single print version)&nbsp;Skadis has to measure a multiple of 40mm, so the X1/P1/A1 can print the 200x240 version, or the 240x240 if you follow <a target="_blank" href="https://wiki.bambulab.com/en/knowledge-sharing/print-volume-limitations" rel="nofollow noopener">this guide</a> to use the entire bed (without AMS only) .&nbsp;I provided a print profile for the 200x240, and I uploaded stl file from 160x160 (should fit in the mini bed) to 400x400, if you have a bigger printer.&nbsp;Note : They are made to be side by side mountable, I mean, you can use any Skadis accessories sitting on two panels at the same time&nbsp;&nbsp;&nbsp;

Heavy Duty Ikea Skadis Panels (Regular included)

Skadis

ChainsawGraphics

If you don&#39;t have an AMS, change the color changes to printer pauses in the slicer. Then manually change your colors and hit resume. &nbsp;Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mmThe Model is 200x284.9mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used: PLA BambuLab Matte Charcoal Black Transmission Distance: 0.3 PLA BambuLab Matte Blue Gray Transmission Distance: 1.5 PLA BambuLab Desert Tan Transmission Distance: 0.4 PLA BambuLab Matte White Transmission Distance: 3.5 This print uses 4 unique filamentsSwap Instructions: Start with Charcoal Black At layer #21 (0.96mm) swap to Blue Gray At layer #40 (1.72mm) swap to Desert Tan At layer #48 (2.04mm) swap to White for the rest.

Fallout Vault Poster - Hueforge 4 color

Light Boxes

plomdawg

Surprised Pikachu in magnet and keychain form!&nbsp;Be sure to print in the correct color order (it should be set in the profile already): black → yellow → white → red &nbsp;&nbsp;The magnet holders are designed to press-fit 6x2mm magnets - can be found on Amazon (or AliExpress for cheaper). I use a rubber hammer to mash them in.

Surprised Pikachu (magnet and keychain)

Small Prints

fixoid

Unleash your festive spirit with these New Year Party Glasses! It is not just a party accessory but a customizable experience. Perfect for New Year's Eve parties, photo booths, or as a unique gift, these glasses are sure to add an extra sparkle to your celebration.

Customizable Party Glasses

New Years

Super Mario power up cube inspired cube light. The cube lights up on 5 sides which makes it very bright. Included is light diffuser for some filaments that are more transparent so the individual LEDs would not be visible. All parts are friction fitted, but a drop of super glue will be needed for it to be tossed round :)The frame I printed in matte white PLA. The sides is printed in yellow and white PLA + from eSUN.For the light cube you are are going to need a USB cable with a switch preferably. And a 5v cool white LED strip.Basic soldering skill and soldering iron required.

Question mark cube light

Nintendo

Walnut Fox

Multicolor tag with editable name for christmas gifts.

Christmas Gift Tag

Christmas

Every Day Counts

This little bin is great for many uses. I could list some usage ideas here or encourage you to develop your own. For instance, it might be great for raccoons.&nbsp;Rest assured, assembling this bin is a breeze. No glue or tools are needed. Everything simply slots into place.&nbsp;The height is around 12cm high and 8.5cm square at the top (around 4½&#34; high x 3½&#34; at the top).&nbsp;This completes my family of wheelie bins in different sizes. See all of them in my <a target="_blank" href="https://makerworld.com/en/u/369067369/collections/152377" rel="nofollow noopener">custom trash cans/bins collection</a>. There is something for everybody.&nbsp;Please support my work by following me, adding a nice comment, an excellent rating and a picture to keep me smiling.&nbsp;

Wheelie Bin - Extra small

Cleaning

Tazinator

Weapon safe flag for 22LR. This flag can be placed in the bolt assembly and will stick out visibly noticeable if of course printed in a bright color. I typically go with red/white but you can use your own preference.

22LR Weapon Safe Flag

Gun/Airsoft

GlennovitS 3D

UPDATE 13. Dec 2023 - Added 12 more sizes! (same lengths, but with a bigger or smaller lid/opening - size 30 and 50. Size 40 is the original) Enjoy!&nbsp;With this simple little print, you can make your bags a lot easier to use in the kitchen! It’s easy to open, pour and close again. Just print and mount on the bag and you are ready to go! No extra hardware needed - all 3D printed. Ready within an hour - almost no reason not to try this ;-)<h2>Overview</h2>The model comes in 18 sizes for now! It's based on the diameter of the lid/opening and the length of the clip. The diameter comes in 3 sizes:<ul><li>30 mm</li><li>40 mm</li><li>50 mm</li></ul>All lengths of the clips in a particular diameter size, uses the same Cylinder and Lid.The clip comes in 6 lengths (currently from XS to XXL). The total length of the different sizes is approx.:<ul><li>XS: 55, 65, 75 mm (depending on the diameter of the lid/openening)</li><li>S: 90 mm</li><li>M: 120 mm</li><li>L: 150 mm</li><li>XL: 180 mm</li><li>XXL: 210 mm</li></ul>For your information, the sizes used on the images are:<ul><li>Pink: 40 - XS</li><li>Yellow: 40 - XL</li><li>Blue: 30 - XS</li></ul>If you have a request for more sizes or other ideas that would make this clip even better, please leave a comment and I’ll get back to you!<figure class="image image_resized image-style-side" style="width:40.53%;"><img src="https://makerworld.bblmw.com/makerworld/draft/450294/2023-12-11_bc82b2a49eaeb.gif"></figure><h2>Assembly</h2><ol><li>Cut a hole in the bag (fx. a hole in the corner just big enough to fit the cylinder)</li><li>Hold the Cylinder in the hole with the thread sticking out.</li><li>Mount the Clip around the bag and Cylinder base</li><li>Screw the Lid on</li></ol><h2>Print instructions</h2>It prints easy and can print with default values. There are some tips though to make it better.<ul><li>Supports: No - the print-in-place hinge prints without supports!</li><li>Walls/perimeters: 3-5 - the more walls, the stronger but more filament is used - so test a see what you find the best.</li><li>Infill: The more infil, the stronger it will be. Mostly needed on the longer Clip versions.</li></ul>&nbsp;Happy printing!&nbsp;<h2>Want to show your support?</h2>You can see all my designs on Printables - and you can become an active supporter. I would really appreciate it!<a target="_blank" href="https://www.printables.com/@GlennovitS3D#join" rel="nofollow noopener">https://www.printables.com/@GlennovitS3D#join</a>

Ultimate Bag Clip (with Lid - easy access!)

Household

ShakaStudio

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA JAYO Black Transmission Distance: 0.8 PLA+ IIID Max Navy Blue Transmission Distance: 4 PLA Creality Fluorescent Red Transmission Distance: 5 PLA Creality Fluorescent Orange Transmission Distance: 4 PLA Creality Fluorescent Yellow Transmission Distance: 5 PLA+ IIID Max White Transmission Distance: 4.8Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Navy Blue At layer #12 (1.04mm) swap to Fluorescent Red At layer #15 (1.28mm) swap to Fluorescent Orange At layer #22 (1.84mm) swap to Fluorescent Yellow At layer #26 (2.16mm) swap to White for the rest.

Space Drift - Hueforge Filament Painting

Filament Painting

Martin Kozak

<h4>Note: I wasn't able to upload profile due to “Slicing timeout” in Maker World. But I provided 3mf file with all the settings for you, you can download it from RAW Model Files section. Please download it and open in it Bambu studio.</h4><h3>Space helmet for kids with lifting visor.</h3><ul><li>Inside diameter is 220 mm and bottom hole in bayonet is about 192 mm in diameter.</li><li>You can print it from colored filament, but I recommend to print it, sand it and the spray it with color. Shape is smooth and easy to sand.</li><li>Parts are meant to be glued together, see images for reference. Superglue works great.</li><li>For earpads, cut piece of foam and clamp it toghether between 3D printed parts using 2pcs M3x10 screws.</li></ul><h3>Transparent visor</h3><ul><li>For visor, use 0.5 mm transparent sheet and hot moulding (heat it up in the oven and stretch it over the mould. You can later apply smoke transparent color paint.</li></ul><h3>Other notes</h3><ul><li>Corrugated hose is not 3D printed. It's just some part I found somewhere.</li><li>Helmet, visor and bayonet are also split into several parts so they can be 3D printed on smaller printers (220 x 220) too. In such case, print provided pins - these will help you alignt parts together. Bambu can print them in one pieces.</li></ul>

Space helmet

Cosplay

橙豆造物

因为上传过不了，所有文件放在原文件处。可能太大了过不自检组装仅需要胶水总共67CM高【3D打印巨型水箭龟】 <a target="_blank" href="https://www.bilibili.com/video/BV1Ak4y1g7B6/?share_source=copy_web&vd_source=0f1a29922eeddb1675f64c100fd3991d" rel="nofollow noopener">https://www.bilibili.com/video/BV1Ak4y1g7B6/?share_source=copy_web&vd_source=0f1a29922eeddb1675f64c100fd3991d</a>&nbsp;40CM 1：1 Pikachu<a target="_blank" href="https://makerworld.com/zh/models/29361#profileId-25788" rel="nofollow noopener">Pokemon Pikachu print-in-place foldable 1:1 40cm 二次创作 - 来自 橙豆造物 - MakerWorld</a>

水箭龟超大版~Blastoise 67CM！！！

Pokemon

Evo 3D

3D printed YOKE&nbsp;<a target="_blank" href="https://cults3d.com/en/3d-model/game/sim-yoke" rel="nofollow noopener">https://cults3d.com/en/3d-model/game/sim-yoke</a>&nbsp;The Yoke was inspired by Daher TBM 930. It uses two AS5600 sensors on the pitch and roll axis, 160 degrees total roll turn, 80 degrees from center to each side, 140mm travel for the pitch, 70mm from center to each side. And the most important thing that makes this work.... joystick board from TLN elettronica, the 8AI-36DI with pins. THE BEST BOARD I HAD SO FAR This unit is stand alone and does not include the throttle quadrant. Despite how complicated it looks, it is very simple to assemble. I&#39;m no expert in electronics or programming or soldering. Very little soldering required, or even none if you have the right tools.So if I could do it, anyone can do it.&nbsp;<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=noCTyux1zQg"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/noCTyux1zQg" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=0JD88Cgy9D8"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/0JD88Cgy9D8" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=G-UF4tv3Hvc"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/G-UF4tv3Hvc" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=KqSmCHr4fdA"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/KqSmCHr4fdA" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;

SIM Yoke

cube3dworld

If a magnet is placed outside of a model, it can scratch the fridge. It looks very ugly over time. The best and stabile way to avoid this problem is placing a magnet inside. This bring me to design “non-scratch fridge magnets”<figure class="image image_resized image-style-align-center" style="width:46.63%;"><img src="https://media.printables.com/media/prints/215531/rich_content/ba96c23a-a900-44fd-bf06-43904010706a/thumbs/cover/800x449/jpg/img_9766.webp"></figure>How-To-Print:<ul><li>Recommended Layer Height: 0,2mm or smaller</li><li>Support: No</li><li>Pause the printing to place a 8x3mm magnet </li><li>Change the filament color as you wish</li></ul>

Fridge Magnets

Keyrings/Portable

maximilian.zupanic

use adaptive layers.easy to print and assemble

Volk Racing TE37

Cars/Motorsports

theonedove

All the 2023 F1 teams (plus Lotus) &nbsp;Will need to possibly confirm colours are correct to your machine. &nbsp;Container that fits them all <a target="_blank" href="https://makerworld.com/en/models/44087#profileId-45506" rel="nofollow noopener">https://makerworld.com/en/models/44087#profileId-45506</a>&nbsp;Enjoy.

F1 Team Costers

Automotive

TKB-3D

Smooth fast stable vice. Great for hobby deskI love this Model, It works Great!

Smooth turning Stable Vice

Tools

chiz_m

If you like to show appreciation for the effort that went into creating this model, pls hit that BOOST button!&nbsp;Santa Hat now available! <a target="_blank" href="https://makerworld.com/en/models/75526#profileId-80041" rel="nofollow noopener">Download it here!</a><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000018267/design/2023-11-29_8d14c8695d84a.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000018267/design/c6564a0c-3193-4ced-8e44-9405fcfbcfb3.jpg"></figure>A <a target="_blank" href="https://makerworld.com/en/models/18035#profileId-16764" rel="nofollow noopener">base/diorama builder</a> is now available for download for this mini figure model!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000018267/design/e5f6d4cc-3842-40ac-a7e3-cb275c3670fa.png"></figure><a target="_blank" href="https://makerworld.com/en/models/18035#profileId-16764" rel="nofollow noopener">Download the different tiles here</a> for the Enderman to carry around!_____________<h3>IMPORTANT NOTE ON COMMERCIAL USE OF MY MODELS</h3>Please note that I am sharing my designs to any one to enjoy but for personal use only. I have NOT provided any commercial license to any one allowing the sale of 3d printed copies of my designs. Seeing my designs being sold for profit is discouraging for me to continue coming up with more designs. I will not hesitate to report to Etsy and other online sites if I find them being sold.__________Easy-to-assemble, quick print, kit card of Minecraft Enderman in mini figure scale. Parts can easily be removed from the sprue without using cutters/clippers just by twisting the part.Print as oriented, with NO supports needed. Model comes with breakaway supports.Default scale is comparable to the Minecraft mini figures but of course you can scale it up to as large as you want! :)<h4>Usage Options</h4><ol><li>Assemble as is and use as toy/collectible; or</li><li>Use the alternative part with loop and glue the halves together to make for a great keychain ornament!</li></ol>__________Thanks to the wonderful folks from <a target="_blank" href="https://sparta3d.ca/" rel="nofollow noopener">Sparta3D.ca</a> for giving me the opportunity to try their Chameleon and Galaxy PLA filaments! Great PLA filaments all around! I did my usual initial test print to make sure the filament are calibrated to meet the required clearances/tolerances of my mini figure models and got the kits printed in my first try! No bed adhesion issues, superb surface finish, no AMS jamming issues! All around great filament performance! Try their filaments today esp. if you&#39;re located in Canada!&nbsp;

Minecraft Enderman Mini Figure Kit/Keychain

Video Games

KYZ Design

Gridfinity baseplates completely remodelled from scratch, designed to minimise print time.<ul><li>Lower overall height (top trimmed)</li><li>Flares on the bottom removed</li><li>Smaller radii</li></ul>Designed for PLA and other materials with good first layer adhesion. You may need to add a brim to print with ASA/ABS. Print <a target="_blank" href="https://makerworld.com/en/models/76537" rel="nofollow noopener">these bins</a> next! <img src="https://makerworld.bblmw.com/makerworld/draft/285381/2023-11-28_4d90d07fb6c75.png">&nbsp;Check out <a target="_blank" href="https://makerworld.com/en/u/11128021/collections/26498" rel="nofollow noopener">this collection</a> for my other Gridfinity models andcheck out <a target="_blank" href="https://makerworld.com/en/u/11128021/collections/18964" rel="nofollow noopener">this collection</a> for my Honeycomb Storage Wall models.

Gridfinity Superlight Baseplates

Gridfinity

Lofted Goods

A mid century modern vase.&nbsp;No supports needed. Easy print. Can be scaled up or down however you like.&nbsp;Filament and hardware/non 3D printed items for this model can be found on my Amazon Storefront, linked here: <a target="_blank" href="https://hendricks.design/links/" rel="nofollow noopener">https://hendricks.design/links/ </a>

MCM Vase

Vase/Planters

Kit Crafters

Build your own Formula 1 2023 racecar with this incredibly easy to print model!&nbsp;Modelled after the 2023 hybrid era cars, this model kit card has spinnable wheels and a flexible front wing like the real racecars.&nbsp;Easy to assemble and is put together with pressure and friction fits.&nbsp;Check out my <a target="_blank" href="https://makerworld.com/en/models/22058#profileId-20000" rel="nofollow noopener">Mario Kart Model Kit</a> as well!

F1 2023 Model Kit Card

Kit-Card

agepbiz

The Pocket Copter is easy and fast to print and assemble and flies great! Requires no extra hardware or glue and prints without support structures&nbsp;update10.07.23I have fixed some mesh issues on the large blade. I recommend that you redownload the blade&nbsp;<figure class="media"><div data-oembed-url="https://www.youtube.com/shorts/HZ3v7kSPpac"><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=HZ3v7kSPpac"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://www.youtube.com/embed/HZ3v7kSPpac" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>&nbsp;&nbsp;Printsettings: No raft No Support Structures 0,15mm layer heightWARNING: CHOKING HAZARD - Small parts Not for children under 3 yrs.

Pocket Copter

This was originally uploaded <a target="_blank" href="https://www.printables.com/model/384997-honeycomb-storage-wall-hsw-bambu-x1cp1p-max-wall-p" rel="nofollow noopener">here</a>, check it out to see past makes and comments--Honeycomb Storage Wall's wall piece - remixed to max out the usable plate on the Bambu X1/X1C/P1P252x248 is the biggest possible but requires a bit of tinkering to print this, see here if you want to print this one: <a target="_blank" href="https://wiki.bambulab.com/en/knowledge-sharing/print-volume-limitations" rel="nofollow noopener">https://wiki.bambulab.com/en/knowledge-sharing/print-volume-limitations</a>Otherwise, use the 252x224 one (see the slicer screenshot for where to place it on the plate)&nbsp;Check out <a target="_blank" href="https://makerworld.com/en/u/11128021/collections/18964" rel="nofollow noopener">this collection</a> for my other Honeycomb Storage Wall models including framed wall sections:&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/253223/2023-12-10_f8b815429fd9d.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/253223/2023-12-09_19d31ded4922d.jpg"></figure>&nbsp;

Honeycomb Storage Wall HSW - Bambu X1C/P1P/P1S Max Wall Piece

Filar3D

Give some life to your business card with the embosser system - 1 Design Included: Lightning Wanna make your own Custom Rollers? Fusion360 files + video tutorial → <a target="_blank" href="https://cults3d.com/en/3d-model/gadget/make-your-own-business-card-embosser-fusion-360-files" rel="nofollow noopener">FUSION360 FILES</a> <figure class="media"><div data-oembed-url="https://youtu.be/V0X9hO-8_uA?si=LK7mVouRukH5EY4c"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/V0X9hO-8_uA" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;Get the FULL 13 PATTERN PACK here: <a target="_blank" href="https://cults3d.com/en/3d-model/tool/the-business-card-embosser-system" rel="nofollow noopener">https://cults3d.com/en/3d-model/tool/the-business-card-embosser-system</a>13 awesome Designs available on the link: · Like a Sir · Dots · Waves · Checkers · Lightning · Fancy · Connect · ZigZag · Smiley · Sunglasses · Headphones · Flexing Emoji · Hearts HOW DOES IT WORK? Simply turn the rollers and a cool pattern will emboss on your card. HOW MANY PARTS? The whole system consists on 4 prints: ·Body_cap1 ·Body_cap2 or body_cap2_tigther_tolernaces ·Roller_a ·Roller_b Of course you can print 1 single body and swap rollers, they just pressure fit.&nbsp;PRO TIP: Use it not only on business card, get creative and make other awesome pieces of art.

The Business Card Embosser System

Desk/Office

Florida_Man

I found this cool model, wanted to share it! I printed it in ABS and it came out great!

Flexi Halloween Skeleton Decoration / Toy

Holloween 

DesignCraft

DISCLAIMER: Print profiles NOT created by DesignCraft may contain outdated model versions or suboptimal slicer settings. Use at your own risk! I have no control to moderate or remove these third party print profiles.&nbsp;The Overture v2 print profile is the original print profile updated with a new model. It's a redesign based on user feedback and also uses about 40% less material. Please refer to the Disclaimer above and also please read the Considerations section below.&nbsp;Description:&nbsp;This adapter system wraps the edges of an OVERTURE 1kg 199x66mm cardboard spool in order to:<ul><li>provide smooth rotation within a Bambu Lab AMS</li><li>prevent carboard debris from depositing within a Bambu Lab AMS</li></ul>Features:<ul><li>Reusable</li><li>OVERTURE nameplate for easy identification when reusing</li></ul>Instructions:<ul><li>Print this model twice for a single spool</li><li>Affix one spool ring adapter on each side of the OVERTURE spool</li><li>See attached photos</li></ul>Considerations:<ul><li>Print Material: Please print with a basic PLA or PETG to minimize any shrinkage.</li><li>Too Tight? Too Loose? Cardboard expands with humidity and contracts when dried. A cardboard spool that has absorbed too much moisture may cause the adapters to fit very tight. Placing the spool in a filament dryer, such as the SUNLU S2, for a bit should resolve this. Note, you should not dry the spool with the adapters attached as they can warp in the heat. Keep in mind that after a long drying session the adapters may fit too loose. This should resolve itself shortly as the cardboard reabsorbs some moisture from the air.</li><li>AMS Lid Doesn't Close? All of the spool adapters I make are less than the official AMS spool clearance limit of 202mm, as specified on the official AMS product page, and as tested within my own AMS. However, some people have stated their spools are rubbing against the lid with the adapters attached. It's hard to say what's causing this since I cannot reproduce the issue myself, however, I've created an <a target="_blank" href="https://makerworld.com/en/models/33133" rel="nofollow noopener">AMS Lid Riser</a> which allows you to keep your AMS lid closed while providing additional clearance for larger filament spools. It's a quick and easy print which you can find on <a target="_blank" href="https://makerworld.com/en/u/243407759" rel="nofollow noopener">my profile</a> or directly here: <a target="_blank" href="https://makerworld.com/en/models/33133" rel="nofollow noopener">https://makerworld.com/en/models/33133</a></li></ul>

OVERTURE Bambu Lab AMS Cardboard Spool Adapter Ring

3D Printing

The Crafty Maker

Carefully push blocks out of the wall using the chisel and the hammer.The player looses when the<ul><li>top row bricks fall during their turn</li><li>wall collapses completely during their turn</li></ul>Suitable for 2 players.TIP: Print 4 bricks in a different color, you can use these as the top 4 bricks.&nbsp;ALL The Crafty Maker designs are protected by Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or reproductions from those files. If you want a commercial license to LEGALLY SELL 3D prints, you'll need a <a href="https://patreon.com/TheCraftyMaker" rel="nofollow">The Crafty Seller Patreon</a> subscription.

Brick Wall Game

Table Game

RobDrivesCars

It's just a tray™ … or is it?Well, it is, but it's a small tray for small parts. Specifically, I designed these for screws when I'm working on fulfilling orders that require I sort specific length screws and count the quantity, but this could be useful for anyone doing any sort of small electronic disassembly!This is StackBox v2. It has several big upgrades over v1:<ul><li>No supports needed, ever.<ul><li>The bottom of the tray has flared. This allows for the ez-stack system do its job using simple bridging</li></ul></li><li>The spout has been redesigned<ul><li>It's now on an angle, meaning screws are less likely to spill out</li><li>The </li></ul></li></ul><figure class="image image_resized" style="width:63.34%;"><img src="https://makerworld.bblmw.com/makerworld/user/171771437/draft/2023-09-19_5lqjwej5c6id.gif"></figure>The base of the tray has a divided interior which allows you to sort two or more different types of items (like two sizes of screws) on either side. I also added ridges to catch small features like the lip of the screw head so it makes for easy sorting/counting.<figure class="image image_resized" style="width:39.77%;"><img src="https://makerworld.bblmw.com/makerworld/user/171771437/draft/2023-09-19_xrseczvlcuch.jpg"></figure>I also added a small funnel at the corner of the tray. This “spout” will just fit into a 2x3-inch (50x75mm-ish) bag in case you need to store those sorted items for whatever reason. There is a small lip right before the spout to prevent loose screws from just falling out of the spout.<figure class="image image_resized" style="width:39.3%;"><img src="https://makerworld.bblmw.com/makerworld/user/171771437/draft/2023-09-19_da87h1awsd5l.jpg"></figure>On, and did I mention they can stack? Because they can. It's kind of the whole point and it makes storing multiple kinds of screws or small parts for a single project super simple.There's also a small friction-fit lid in case you want to keep those parts free from the eyes of wandering cats.This print has been simplified to just three files:<ol><li>Small Tray: 10mm high walls</li><li>Medium Tray: 25mm high walls</li><li>Lid: It's a lid, kind of! There is no securing other than friction-fit (which depends on your printer tolerances). This is more to prevent bumps and spills.</li></ol>----The original v1 of this model (which is retired and will no longer be updated) <a href="https://www.printables.com/model/493058/" rel="nofollow">can be found here</a>.

Stackbox - The Stackable Small Parts Sorting Tray (v2)

Organization

RainerBavaria

i designed a Buildplate-holder for 7 Plates , designed in Stairs so you can see the front of every plate for reading or seeing the desing.&nbsp;I designed in 2 parts so it fits on the printbed at once.i desinged conectors as well , i did not need any glue for fitting it .i printed standing on the Bambu-Logo→ less filament changes ,also then is no support needed.printed in 0.20 layers , 2 perimeters , 3Bottom/Top.i did a pause before th toplayers and fill some steelballs in for some wight, so i used grid-infill 10%.&nbsp;&nbsp;

Buildplte-Holder  X and P Series

Bambu 

Ukdavewood

Update 2/2/24Added Extra profile containing optional underwater parts and a stand - which can be bolted on the bottom with 3xM4 x 15mm Cap head screws.&nbsp;&nbsp;&nbsp;Update 13/2/24Updated the underwater print profile to move the section breaks so that they line  up with the main waterline model.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/530902/2024-02-13_4007ddc013b068.jpeg"></figure>Also doubled up  the tiny azipod motor parts - as it doesn't add much to print time and will then give some spares in case of breakages or printing issues.&nbsp;Also slightly improved the adaptive layer height settings.&nbsp;&nbsp;Update 4/1/24.I have added the underwater hull part of this ship to my 1:1000 scale version here<a target="_blank" href="https://makerworld.com/en/models/15006#profileId-14776" rel="nofollow noopener">https://makerworld.com/en/models/15006#profileId-14776</a>&nbsp;<figure class="image image_resized" style="width:29.97%;"><img src="https://makerworld.bblmw.com/makerworld/draft/530902/2024-01-04_4a0113e166b658.jpg"></figure>If there is any interest in a version scaled for this 1:500 version please let me know via the comments I will create one.&nbsp;&nbsp;&nbsp;Scaled at 1:500 and mutli coloured - this model is multi plate, quite large and requires a lot of time to print.It is recommened that people try one of the 1:1000 or 1:1250 version first - which print without supports on a single plate.&nbsp;Updated 31/12/23New version of the Dome on deck18 added as a 2nd + 3rd plate on the same print profile as was uploaded on 21/12&nbsp;Updated 21/12/23Alternative version of deck 8 included in seperate profile - to avoid issues with lighting channel showing through very thin deck layer.&nbsp;Updated 9/10/23:Corrected a problem with a duplicate part from deck 15 being present and one part from deck 14 being missing.See Plate 14.&nbsp;Updated 30/9/23:Corrected a problem with the port side of the hull section not slicing correctly.&nbsp;Also note that since releasing these complex multi part 1:500 ship models I have found that the BL printers are capable of printing these models quite well at a 1:1000 scale on a single plate. Seperate entries in Makerworld have been created for the 1:1000 versions.&nbsp;&nbsp;Update: 8/9/23:A new version of the model has just been updated that addresses points 2,3,4 & 5 below.&nbsp;&nbsp;Update: 18/8/23Following feedback from the 2 successful end user prints of this model I am planning to make the following updates:<ol><li>Enhance the build instructions - I have already made some updates to bring these instructions in line with the slightly more detailed ones on printables.</li><li>Thicken up some of the more fragile top decks - that are quite difficult to remove from anything other than a cooled down textured sheet</li><li>Change the settings in the build files to increase the use of brims - to avoid corner lift off</li><li>Include built in part numbering on the main deck parts.</li><li>Provide a version of the centre hull section with slightly wider tollerances - to make it easier to push parts together</li><li>Provide simpler smaller scale versions (1:1000) of this ship for single plate, single colour and multi colour printing.</li></ol>&nbsp;Third ship in a series of Seven 1:500 scale Models of P&O Cruise Ships - Iona - for personal use only.&nbsp;Iona is the largest P&O Cruise Ship currently in service.&nbsp;Designed for multi colour printing on a Bambu Lab X1C or P1P with 8 Colours (2 x AMS).&nbsp;STL files not available individually as there are too many.Designed using Fusion 360.Model is approximately 3 build plates long - so needs to be printed in separate sections which are slotted together at deck level, then each deck is bolted together using M4 Cap Head Screws.Printing will take well over 60 hrs in total - in separate plates which average about 2 hrs printing time each - but some of the more complicated plates take in excess of 13 hours to print.&nbsp;For reference here are the filament colours I have been using in order of quantity - with a best guess at Bambu Lab equivalentseSUN PLA+ Filament 1.75mm, PLA Plus 3D Printer Filament Cold White eSUN PLA+ Silver SunLU PLA+ Blue SunLU PLA Red 1kg 1.75mm PLA 3D printer filament Printer - With coil (Gold Color) SUNLU 3D Printer Filament PLA+ Plus Grass Green Aldi Balco Blue 1kg SunLU PLA Yellow Bambu Lab Orange ICE Filaments ICEFIL1PLA104 PLA filament, 1.75mm, 0.75 kg, Barbaric Brown eSUN PLA BLACK  With the quantity of white being about 10x the rest.My best guess at equivalent Bambu Lab Filaments to these would be:Bambu Lab PLA Basic Jade White Bambu Lab PLA Silk Silver Bambu Lab PLA Basic Blue Bambu Lab PLA Basic Red Bambu Lab PLA Basic Bronze Bambu Lab PLA Basic Green Bambu Lab PLA Matt Ice Blue Bambu Lab PLA Basic Yellow Bambu Lab PLA Basic Orange Bambu Lab PLA Basic Brown Bambu Lab PLA Basic Black&nbsp;Around 22 M4x16 and 4 M4 x 10  &nbsp;Build instructions. (updated 18/8/23)&nbsp;<ol><li>Print plates in the order presented. Writing deck numbers onto printed parts can help with organisation. **</li><li>Recommend textured plate is used for most prints - especially those with only 1 layer in some parts - such as deck 19 Bow. Cool plate however useful for very long thicker prints - such as Hull if being able to pause prints overnight is a requirement. **</li><li>For the thicker hull sections the dovetail joints are quite tight so a small amount of trimming of the dovetails may be required to get the pieces to slot together.</li><li>On the stern section of the hull I have included some slight overlaps to stop corners from being round that will need to be trimmed off. **</li><li>It is recommended that a small hammer is used to gently tap the dovetail joints together - going slowly from side to side - until the sections are flat.</li><li>Completed decks can then be bolted together using the holes with slots for screw tops.</li><li>Lifeboats need to be slotted into deck 7 tabs - it may be necessary to slightly widen the slots in the lifeboats with a screwdriver.</li><li>The canopy on deck 19 also slots into some fairly tight holes - so again these might need to be prized open slightly with a small screwdriver</li></ol><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/530902/2023-08-18_a2c7dd1a41697.jpeg"></figure>&nbsp;&nbsp;Model has only been printed once so far, and was re-sliced for this upload.Further details of the design and built process are available on the Bambu Labs forum AMS section.Details of this model will also be posted on<ol><li>The Bambu Lab Official Facebook Group</li><li>The P&O Facebook Group</li><li>The Ship Models Facebook Group</li></ol>&nbsp;This is a personal project. I have no connection to P&O Cruises or Carnival Corporation other than being a customer.This version is released under a CC Non Commercial No Derivatives license due the P&O Cruises branding.&nbsp;&nbsp;f360 ref: iona 5b Arvia V1 S500 v122. 30/9/23  &nbsp;&nbsp;&nbsp;

P&O Cruises Iona 1:500 Multi part

Large Print Builds

"They're the most heavily armored ground vehicles in the Imperial Army." "...so what you're saying is that you have a thorough knowledge of just how screwed we are."Introducing the newest member of the springie Star Wars series, the massive AT-AT springie. One of the most feared weapons in the Star Wars franchise made into a bobble toy.&nbsp;<a href="https://www.youtube.com/shorts/Xwn5s7uAGuA" rel="nofollow">https://www.youtube.com/shorts/Xwn5s7uAGuA</a>&nbsp;The used spring is designed by <a href="https://www.printables.com/social/106529-3d-printy/about" rel="nofollow">3D Printy</a> (<a href="https://www.printables.com/model/282561-parametric-bobblehead-springs" rel="nofollow">Parametric Bobblehead Springs</a>)Supports needed for most parts. STL files are oriented for optimal printing.See photos for assembly.&nbsp;ALL The Crafty Maker designs are protected by Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or reproductions from those files. If you want a commercial license to LEGALLY SELL 3D prints, you'll need a <a href="https://patreon.com/TheCraftyMaker" rel="nofollow">The Crafty Seller Patreon</a> subscription.