Klutzleo

49ers

A2S dESING

Do you want to plant an avocado? This support will be very useful for planting it. &nbsp;Follow the instructions for planting.<ol><li>Keep the bone clean. When you eat this superfood, be careful not to cut it. Wash it to remove any meat remains that may be attached to it. </li><li>Identify its parts. Although the bone appears spherical, it is key to know which is the upper part, —since the sprout will grow from it—, and which is the lower part, from which the root will sprout. The slightly pointed area is the upper one.</li><li>Put the bone inside the sprouting support and place it inside a glass.</li><li>Add water until it covers half of the avocado pit. </li><li>Put the glass in a place with direct sun and avoid cold spaces. Change the water every two days to keep it clean and fresh. The roots and stem should begin to sprout in two to six weeks. If nothing happens in a month or so, throw it away and try a new seed. </li><li> When the stem is about 15 cm (3-4 weeks old), cut it in half and leave it approx. in 7 cm (even if it hurts, but it is about stimulating the roots). </li><li> When the roots are thicker and the stem has leaves again, plant the seed in a pot. Leave it sticking out of the ground as it was in the glass. Place the pot in bright, indirect light. Water carefully. The soil must remain moist, but not soggy. </li><li>You'll know you're overwatering if the leaves start to turn yellow and droop. If this happens, stop watering and allow the soil to dry out before watering again.</li></ol>

Avocado germinator

Garden

MottN.

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>If you enjoyed this model, consider giving it a boost to support the creation of more cool stuff! Thanks!</boostcontent></boostme><ul><li>Update 2023_11_15: added links to finger tracks XL for anyone struggling to get the print to work.</li><li>Update 2023_11_13: Updated files to chamfer some additional corners on the tread to feel nicer.</li><li>Update 2023_11_10: Updated models and print profile. Model is optimized to print better and the track will be much more reliably free running.</li></ul>&nbsp;Everyone needs some tracks to drive around with their fingers!This is a very satisfying and fun fidget, and also my first print in place model :)&nbsp;When first printed each track joint may take a tiny bit of force to free up; after that the tracks should run freely with little effort.&nbsp;To remove track:If it continues to be difficult to run, or has a sticky spot, you may have to remove the track to completely free up.This also makes for an easy multi-color model; print in two colors and swap tracks! (Don&#39;t risk this if your material doesn&#39;t have good layer adhesion like some matte or silk PLAs, you will break the track pegs.)&nbsp;To remove the track, hold with the connected side of the track body down, and with your fingers apply pressure on the wheel hubs to bend slightly inwards. This should provide enough clearance that the track can easily be removed.Replacing the track is slightly more difficult but follow the same basic strategy of flexing the track body.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000059737/design/2023-11-13_dd9789575054a8.gif"></figure>&nbsp;PrintingThe model is made to work with and 0.4mm nozzle and 0.2mm layer height. If you use a larger layer height some gaps will be fused together by the slicer.&nbsp;If you are having trouble with your first print try a different filament, and please start with something simple like a plain PLA. Some specialty colors like silks mainly and some mattes lack the strength for this design to work well. Also, I strongly recommend printing In PLA; PETG tends to be hard to print things with small gaps without stringing or blobbing. Not that it&#39;s not possible, but you will probably have better luck with PLA, and no reason really to print in something more fancy.&nbsp;&nbsp;Print in the orientation shown below or as in the print profile.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000059737/design/2023-11-07_d1b42cc880c0e.png"></figure>&nbsp;If you want to print several different colors, you can fit 5 on the build plate in print by object mode. Then just print overnight or come back in ~10 hrs. I&#39;ve uploaded this profile as well.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000059737/design/2023-11-10_af9cff3ff21ad.png"></figure>&nbsp;Related cool stuff!If you are having trouble with durability of the pins or tracks, or just not being able to get things to free up, check out the Finger Treads XL model. It has bigger pins and is a little more forgiving because of its larger size. It&#39;s big enough its not quite as good of a fidget, but still a very satisfying print in place model and fun to play with.&nbsp;Get it here: https://makerworld.com/en/models/65624#profileId-68957&nbsp;Size comparison below - XL version top.<figure class="image image_resized" style="width: 32.59%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000059737/design/2023-11-15_b4cf6d1a056c8.jpg"></figure>&nbsp;&nbsp;&nbsp;If you have printed a bunch of these and need something to do with them, check out the Benchy-Dozer!https://makerworld.com/en/models/85433#profileId-91329<figure class="image image_resized" style="width: 41.67%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000059737/design/2023-11-15_c16db6c5576808.jpg"></figure>&nbsp;

Finger Treads Fidget Track - Print In Place

Fidget

Fletch

The Saturn V rocket miniature model developed by NASA to take astronauts to the moon. Some details were omitted due to how small they were or poor results after slicing. Available in both multicolor and single color. The rocket can stand vertically without any support once assembled.&nbsp;This model should fit all Bambu printers. You will need to move the model to the corner on the A1 mini to fit both the model and prime tower.&nbsp;Update 3/14/24 - <a target="_blank" href="https://makerworld.com/en/models/254506" rel="nofollow noopener">Added a stand to display the Saturn V rocket that can be found here</a>.&nbsp;NotesThe antenna is pretty small, be careful when removing from the kit. When pushing the antenna through the third stage, you can cut the tip off if needed. Do not cut the side that prevents the antenna from going through the third stage (the side that has an extra extrusion closest to the Saturn V label). Once the antenna is through the third stage, you can give it light tug to secure it in place.&nbsp;Assembly<img src="https://makerworld.bblmw.com/makerworld/draft/706290/2024-03-01_0c0b17411535b8.jpg">&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/706290/2024-03-01_88e6226af64dd8.jpg">&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/706290/2024-03-01_c99b1d1591bfb.jpg">&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/706290/2024-03-01_c63a7fd7539ff8.jpg">&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/706290/2024-03-01_725c5a900205e8.jpg">&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/706290/2024-03-01_a0f5646572fbd8.jpg">&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/706290/2024-03-01_38eaf64fc600e.jpg">&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/706290/2024-03-01_bf8c15a68b8df8.jpg">

49ers

Garden

Fidget

Space