Kilonova

technerd

Funny "do not disturb" door hanger. Size = 165x70mm&nbsp;If you like more NSFW content and want to support me, check out my Naughty Christmas Cookie Cutter Set :-) here: <a target="_blank" href="https://cults3d.com/en/3d-model/naughties/sex-positions-naughty-christmas-4-piece-cookie-cutter-kit" rel="nofollow noopener">Naughty Cookie Cutters</a>&nbsp;And while you at it listen to some Groovy Disco Mix 😉<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=4nvewes8Inc"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/4nvewes8Inc" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;&nbsp;

do not disturb door hanger - doggy style sex

adult 🤷‍♂️🧔‍♂️

dohara1985

Translucent color test strip and Lightbox box&nbsp;I design alot of custom light boxes for customers. Different layer heights of colors allow different amounts of lights through as well as changes the color. So I needed a way to not only test this but to easily compare colors (i.e. Bambu red vs sunlu red).&nbsp;So I designed these strips and box. The strips are about a 12 min print (Bambu a1 mini). The box needs supports.&nbsp;I added the text in bambu studio. The text is easy to change in studio in between strips.&nbsp;I needed a way to store the strips. It's not a perfect solution but works well enough. I am using this rolodex and clips:<a href="https://www.printables.com/model/312084-rolodex-gift-card-clips/files" rel="nofollow">Rolodex Gift Card Clips by 3D Printy | Download free STL model | Printables.com</a>&nbsp;Please "Like", review, follow and upload make.I spend a lot of time designing and allow it all to be used for free (including commercially).If you'd like to help me out, below are the possible ways. Thank you in advance!<a href="https://www.buymeacoffee.com/dohara1985o" rel="nofollow">https://www.buymeacoffee.com/dohara1985o</a>&nbsp;&nbsp;

Translucent color test strip and Lightbox box

Print Profiles

diego.cattel

Coffee tamper two size 50mm and 52mm

Coffee Tamper

Kitchen

Halfway_Engineered

Be the coolest nerd at your next smash tournament with this carry case for your pro controller.&nbsp;A remix of the popular parametric rugged box, with a custom molded cutout for a nintendo pro controller. Uses 6x M4x30mm screws. I recommend 3 walls and 5% infill. &nbsp;The cutout is slightly oversized to leave room for scraps of 1mm craft foam as bumpers to prevent any scratching.

Rugged carry case for Nintendo switch pro controller

Video Games 🎮 

BamBam Design

<h4>The Sunflower Windmill - Self adjusting Sunflower wind turbine</h4><figure class="media"><div data-oembed-url="https://youtube.com/shorts/Nb2DXeNK04M?si=IG2UF_6DRZEUfwdW"><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=Nb2DXeNK04M"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://www.youtube.com/embed/Nb2DXeNK04M" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>Need a bit more wind, but can turn fast as well. Great spring &amp; summer garden decoration<ul><li>Beautiful Windmill with a Sunflower Propeller Design</li><li>Self adjusting to wind direction through the Tail Blade</li><li>100% printed, no Screws or tools needed</li><li>You can add 2 Propellers on one Axle with 2 distances</li><li>Choose your propeller sizes and directions (You get nice effects if you choose different directions)</li><li>Rods are stack able to your needed height</li></ul><h4>Printing:</h4>The rod could be a bit difficult to print, i added custom support, but clean your buildplate and apply some glue.&nbsp;Profile is tested with PETG &amp; PLA 👍🏼 Prefer PETG for Axle and Rod&nbsp;Info:This time the Axle is a bit shorter to add only 2 propeller with 10mm and 2 distances with 5mm each.And i slightly redesigned the tail blade to match the sunflower design. My other windmills are still fully compatible if you want to mix it up:<ul><li><a target="_blank" href="https://makerworld.com/models/235261" rel="nofollow noopener">Toroidal Windmill</a></li><li><a target="_blank" href="https://makerworld.com/en/models/250216" rel="nofollow noopener">Honeycomb Windmill</a></li><li><a target="_blank" href="https://makerworld.com/en/models/388124" rel="nofollow noopener">Elliptical Windmill</a></li><li><a target="_blank" href="https://makerworld.com/en/models/425419" rel="nofollow noopener">Sunflower Windmill</a></li><li><a target="_blank" href="https://makerworld.com/en/models/454861" rel="nofollow noopener">Raccoon Windmill</a></li><li><a target="_blank" href="https://makerworld.com/en/models/255324" rel="nofollow noopener">CLAMP for Windmills</a></li></ul><h4>Assembly:</h4><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425419/design/2024-04-12_5daa8d4f64298.png"> Thanks to all followers and don&#39;t forget the virtual handshake 👍 ….Happy Printing&nbsp;Some other Windmill Designs:<a target="_blank" href="https://makerworld.com/en/models/454861" rel="nofollow noopener">Raccoon</a><figure class="image"><a href="https://makerworld.com/en/models/454861" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425419/design/2024-05-06_9785fb508d759.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/250216" rel="nofollow noopener">Honeycomb</a><figure class="image"><a href="https://makerworld.com/en/models/250216" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425419/design/2024-05-06_9a2a48a0331ed.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/235261" rel="nofollow noopener">Toroidal</a><figure class="image"><a href="https://makerworld.com/en/models/235261" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425419/design/2024-05-06_ca5dfbc30c041.jpg"></a></figure>&nbsp;Checkout this Clamp for windmill, as well🧐 <a target="_blank" href="https://makerworld.com/models/255324" rel="nofollow noopener">https://makerworld.com/models/255324</a><a target="_blank" href="https://makerworld.com/en/models/255324" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425419/design/2024-03-15_6d9c46a2c3e8c.jpg"></a>&nbsp;Commercial license you can get here:<a target="_blank" href="https://www.patreon.com/BamBamDesign/membership" rel="nofollow noopener">https://www.patreon.com/BamBamDesign/membership</a>

Sunflower Windmill - Customizable System

🧧🧧Really Want to Print 🧧🧧

TPU 🧵 

jarvizar

3d miniature of Magic Kingdom in Walt Disney World, Florida!&nbsp;Also includes the Contemporary Resort and Bay Lake Tower!&nbsp;&nbsp;&nbsp;Disneyland California Miniature: <a target="_blank" href="https://makerworld.com/en/models/252986#profileId-269372" rel="nofollow noopener">https://makerworld.com/en/models/252986#profileId-269372</a>&nbsp;Check out my collection of other miniatures: <a target="_blank" href="https://makerworld.com/en/u/1935755220/collections/146964" rel="nofollow noopener">https://makerworld.com/en/u/1935755220/collections/146964</a>&nbsp;&nbsp;&nbsp;Model created in Blender using data imported with the <a target="_blank" href="https://github.com/vvoovv/blosm" rel="nofollow noopener">Blosm</a> addon.&nbsp;<h3>Slicing & Printing Details</h3>This model was designed to be printed with a 0.4mm nozzle (0.16mm layer heights) or a 0.2mm nozzle (0.08mm layer heights)&nbsp;I have uploaded two different print profiles for each nozzle size with the recommended settings pre-applied ready to slice and print!&nbsp;Each print profile includes two different models of Magic Kingdom, one with suspended monorail tracks and another with grounded tracks (no overhangs).&nbsp;<figure class="table" style="width:95.01%;"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td><figure class="image image_resized" style="width:100%;"><img src="https://makerworld.bblmw.com/makerworld/draft/700259/2024-02-06_94f5271985add.jpg"></figure>Suspended Monorail Tracks</td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/700259/2024-03-01_5e235222ef045.png"></figure>Grounded Monorail Tracks</td></tr></tbody></table></figure>&nbsp;<ul><li>If printing with a 0.4mm nozzle, I highly recommend slicing the model using ‘Classic’ wall generation. ‘Arachne’ walls will usually omit some of the monorail pillars leading to poor bridging and stringing.<ul><li>*Note: if smaller details disappear after slicing with ‘Classic’ wall generation, try lowering the line/extrusion width of outer walls (external perimeters) closer to 0.4mm. Can also try enabling “Detect Thin Walls”!</li></ul></li></ul>&nbsp;<ul><li>If printing with a 0.2mm nozzle (or 0.4mm nozzle with the grounded tracks), I recommend slicing the model with ‘Arachne’ wall generation to include buildings and smaller details ‘Classic’ walls often fails to include.</li></ul>&nbsp;The included designer print profiles have the above settings pre-applied!&nbsp;Filaments used in photos: Sunlu Matte White (miniature), Bambu Matte Black (frame), Sunlu Sky Blue (water)&nbsp;<h3>Framing Details</h3>&nbsp;This model measures almost exactly 6.7in by 4.7in (170.5mm X 119.5mm) and should fit most 5x7 frames (assuming frame lip/overlap is around a quarter inch). Feel free to change the scale/size of the model(s) to meet your needs.&nbsp;Personally I use these cheap frames from Amazon: <a target="_blank" href="https://www.amazon.com/dp/B0C8HY7YSQ" rel="nofollow noopener">https://www.amazon.com/dp/B0C8HY7YSQ</a>And blue printer paper: <a target="_blank" href="https://www.amazon.com/Astrobrights-491618-Multipurpose-8-5-Inch-11-Inch/dp/B00006IDQT" rel="nofollow noopener">https://www.amazon.com/dp/B00006IDQT</a>&nbsp;I also included a fully printable frame (including a 1mm thick water plate) designed to fit all my miniature cities.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/700259/2023-12-27_7536c6348b762.webp"><figcaption>Gif of the Printable Frame</figcaption></figure>&nbsp;A frame is not required! This model looks great by itself and can be displayed almost anywhere.&nbsp;See my <a target="_blank" href="http://patreon.com/jarvizar" rel="nofollow noopener">Patreon</a> for a commercial license, early downloads, polls towards future models, and more!&nbsp;

Disney World Magic Kingdom 3D Miniature

👍Want to Print 👍.

jcwren

<div><h1>Summary</h1><div>This is an adapter for a 4" port on a dust collector to two 2" shop vac hoses. I have a router table that has an upper and lower dust collector port, and needed a way to connected them both to the dust collector.This was printed in ABS and glued with epoxy, and didn't collapse even after connecting the two 2" ports together.The 'wall' variable in the OpenSCAD file allows setting the thickness of the item.The 2.96mm value is recommended by Slic3R PE when setting the perimeters to 4 and checking the 'Detect thin walls' option.The 'port_small' and 'port_large' array are just for reference. The actual values are hard-coded within the source. The top and bottom half are connected with a small cube so that the part is manifold and can be printed in one session.</div><h1>Print Settings</h1>Printer Brand: <div>Prusa</div> <pre><code> Printer: <div>i3 MK3</div></code></pre> Rafts: <div>Yes</div> <pre><code> Supports: <div>No</div></code></pre> Resolution: <div>0.15mm</div> <pre><code> Infill: <div>20%</div></code></pre> Notes: <div>In Slic3r PE, set Layers and perimeters->Vertical shells->Perimeters to 4, and check 'Extra perimeters if needed', 'Ensure vertical shell thickness', 'Detect thin walls', and 'Detect bridging perimeters' (the last one probably isn't needed, but it's always checked)</div></div>

4" To Dual 2" Vacuum / Dust Collector Adapter

Resin 🩸

AJAX3D

This is the current files for the TD-1 PCB kit.&nbsp;TD-1 Is now available! Visit my website to find the best reseller for you. <a target="_blank" href="https://ajax-3d.com/resellers/" rel="nofollow noopener">Resellers - AJAX-3D</a>&nbsp;The project guide can be found on my website here. <a target="_blank" href="https://ajax-3d.com/resources/" rel="nofollow noopener">Resources - AJAX-3D</a>

TD-1 PCB Kit

ABS Filament 🧵 

3Designfan

Just a simple adapter/reducer to connect a 2 inch to 4 inch duct with grooves for the hoseclamps

4 inch to 2 inch duct  adapter

PETG

make 3D

<h2>Summary</h2>A funnel for pouring back unused resin from the vat to the resin container. This makes it a bit easier to not spill the resin all over the place.Use a resin filter to ensure no cured resin parts are poured back into the resin container.After use, simple wipe the nozzle of the funnel as well as the insides clean with a power towel.The diameter of the funnel nozzle is 28mm. Perfect for the Anycubic containers.&nbsp;Rafts: No Supports: NoResolution: 0.32 Infill: 25% Filament: <a target="_blank" href="http://www.amazon.com/s?url=search-alias&field-keywords=3DE+PLA" rel="nofollow noopener">3DE PLA </a> Dino Green Notes: Prints without support upside down.

Resin funnel

ASA 🧵

ruiraptor.channel

Hi guys,&nbsp;if you have the Wham Bam enclosure for the Bambu Lab P1P and want to add a fumes and odor extract unit, then this adapter might be handy for you.It will attach to the side opening of the wham bam enclosure and has the rotation lock sistem for the tubes.&nbsp;You will need x4 M3x15 screws.

Fumes extraction unit (from Wainlux) adapter for Wham Bam Exhaust Opening

Ventilation 💨

Jeremy Makes

This is used to keep the liquid cup with the soap dispenser and prevent dripping. Should fit the standard laundry detergent dispenser. I printed mine at a 50deg angle with the sharp point cut flat and use supports to make sure it doesnt fall over (see 3mf file)I personally printed with 7 walls and 10% infill but this isnt going to see any type of weight so tbh 2 walls and 10% infill will be just fine. any material you like i suggest cutting the hole and printing just that to ensure it fits on yours.Feel free to do what you like ive included f360 file and .step file. if you sell this or make money from it consider donating a little to help me.

Laundry Liquid cup holder for laundry soap

✅ Printed ✅

CPDesign

I designed this organiser for my girlfriend&#39;s Skadis board for pencils, brushes, scissors, etc. It has two “pockets” with dividers.&nbsp;printing preferences on BBL P1P:<ul><li>printed in Redline PLA</li><li>0,2 mm standard quality</li><li>20% infill</li><li>brim auto</li><li>tree support </li></ul>printing time was ca. 4 hours.

Organiser for Ikea Skadis

IKEA 

mishkin2

<h4>This is a very light print. There are no supports or bridges needed here. Anyone can handle it, even a beginner. Any default settings will do. The only condition is that the layer height is at least 0.2 mm so that the ribbed surface is printed. I&#39;m just sure that it will look very nice if printed with <a target="_blank" href="https://s.click.aliexpress.com/e/_onq74Yg" rel="nofollow noopener">Silk Rainbow PLA</a> thread</h4>&nbsp;<h3> </h3>

Cotton Pad Dispenser

Bathroom

3d miniature of Toronto, capital of Ontario in Canada!&nbsp;&nbsp;Check out my collection of other Canadian miniatures: <a target="_blank" href="https://makerworld.com/en/@jarvizar/collections/766210" rel="nofollow noopener">https://makerworld.com/en/@jarvizar/collections/766210</a>&nbsp;Collection of all my miniatures: <a target="_blank" href="https://makerworld.com/en/@jarvizar/collections/146964" rel="nofollow noopener">https://makerworld.com/en/@jarvizar/collections/146964</a>&nbsp;&nbsp;Model created in Blender using data primarily from the <a target="_blank" href="https://github.com/vvoovv/blosm" rel="nofollow noopener">Blosm</a> addon.&nbsp;<h3>Slicing & Printing Details</h3>&nbsp;This model was designed to be printed with a 0.4mm nozzle and 0.16mm layer heights.Try using a 0.2mm nozzle (0.08mm layer heights) or scaling up for even finer detail!&nbsp;Note: If roads or other small details disappear after slicing, try lowering the extrusion/line width of external perimeters (outer walls) closer to 0.4mm OR use Arachne walls. Can also try enabling “Detect Thin Walls”.&nbsp;The included “Designer Profile” should have the above settings pre-applied and is ready to slice & print!&nbsp;<h3>Framing Details</h3>&nbsp;This model measures almost exactly 6.8in by 4.8in (170.5mm X 119.5mm) and should fit most 5x7 frames (assuming frame lip/overlap is around a quarter inch). Feel free to change the scale/size of the model(s) to meet your needs.&nbsp;Personally I use these cheap frames from Amazon: <a target="_blank" href="https://www.amazon.com/dp/B0C8HY7YSQ" rel="nofollow noopener">https://www.amazon.com/dp/B0C8HY7YSQ</a>And blue printer paper: <a target="_blank" href="https://www.amazon.com/Astrobrights-491618-Multipurpose-8-5-Inch-11-Inch/dp/B00006IDQT" rel="nofollow noopener">https://www.amazon.com/dp/B00006IDQT</a>&nbsp;I also included a fully printable frame (including a 1mm thick water plate) designed to fit all my miniature cities.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/723530/2023-12-22_a8fa62e18a031.webp"><figcaption>Gif of the Printable Frame</figcaption></figure>&nbsp;A frame is not required! This model looks great by itself and can be displayed almost anywhere.&nbsp;See my <a target="_blank" href="http://patreon.com/jarvizar" rel="nofollow noopener">Patreon</a> for a commercial license, early downloads, polls towards future models, and more!&nbsp;

Toronto Ontario 3D Miniature

Memories

OlleMark

Updates:31-10-2023 - New version with a better printing bottom, sorry to everyone that had problems.05-11-2023 - The handles should now print better. :)&nbsp;Stackable hexagon storage box V2 LargeA model with supports for the handles is provided because all printers cant handle the long bridge for the handles.The Bambulabs P1P could handle the handle bridge without problem but my V400 couldnt so pick the supported version if you want to be safe. :)A big upgrade in both aesthetic and strength for a little more filament.For different sizes look at my profile and for a model with less filament use look at the V1.&nbsp;Dimensions:250*200*100mm / 250*200*150mm

HexStorage V2 Large

Organization 

Pepper

Wavy Easter Egg Continer&nbsp;This Model is a Festive Easter egg container with a “Twist” :)&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/741090/2024-03-21_97342a1588a24.jpg">&nbsp;With subtle Wavy curves, this model had two halves that screw together.&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/741090/2024-03-21_1a00c69f6c7c5.gif">&nbsp;A perfect container for candy or other small objects&nbsp;&nbsp;Printed in Elegoo PLA PRO Black, only takes 24 grams of plastic.&nbsp;if you like this model you should check out my othter ones as well!<img src="https://makerworld.bblmw.com/makerworld/draft/741090/2024-03-21_19397354e2967.webp">https://makerworld.com/en/models/372140#profileId-272110&nbsp;Happy printing!

Wavy Easter Egg Container

Easter 🐇🥚

The Crafty Maker

Introducing my very first sponsored project. When Bambu Lab released their new translucent PETG filament I've reached out to them with an idea that have been thinking about for a while now, a model that resembles a stained glass window. Their translucent filament is a perfect fit for this.&nbsp;I was pleasantly surprised that they agreed and liked the project idea, so they sent me a batch of translucent PETG filament to get things started. &nbsp;There were a lot of ideas to choose from, but the space shuttle stuck with me, since I'm a big space nerd, so that was an obvious choice for me.&nbsp;Designing it was quite challenging because the color of the translucent filament varies on the thickness of the part. It took quite some test printing to get the best color and transparency, but eventually I was able to find the right balance and finished up the model.&nbsp;The filaments I've used are all Bambu Lab filaments. The parts that resemble the stained glass are printed in Translucent PETG Light Blue, Orange, Brown and Grey. Only the white parts are printed in a PETG that's not part of the translucent filament line. Those are printed in Basic PETG Transparent.&nbsp;The front and back frame are both printed in Basic PETG Black. All the other parts are all printed in Basic PLA. The box, lid and led panel or led strip holder are printed in the color black, the diffuser is printed in the color white.&nbsp;The box and the lid have little compartments where you can glue in magnets (width 6mm & height 3mm) but this is optional and not needed to keep the lid on the box.&nbsp;Print Settings&nbsp;Stained glass pieces<ul><li>100% infill</li><li>Top surface pattern: Octogram Spiral</li></ul>Front & Back Frame<ul><li>Arachne wall generator or detect thin walls</li></ul>Backlight Led Panel Holder<ul><li>Regular support on build plate only</li></ul>Backlight Led Strip Holder<ul><li>Outer brim recommended</li></ul>Diffuser<ul><li>100% infill</li><li>Outer brim recommended</li></ul>Box & Lid<ul><li>Outer wall speed 90 for consistent surface finish</li><li>Seam position: Back</li></ul>&nbsp;For the light source I've used following Bambu Lab products&nbsp;EU Store<ul><li><a target="_blank" href="https://eu.store.bambulab.com/collections/bambu-lab-3d-printer-filament/products/bambu-cmyk-backlight-board?skr=yes" rel="nofollow noopener">Led panel</a></li><li><a target="_blank" href="https://eu.store.bambulab.com/en-be/products/s-shape-led-strip-light-ws2812b-rgb" rel="nofollow noopener">Led strip</a> </li></ul>US Store<ul><li><a target="_blank" href="https://us.store.bambulab.com/collections/bambu-lab-3d-printer-filament/products/bambu-cmyk-backlight-board?skr=yes" rel="nofollow noopener">Led panel</a></li><li><a target="_blank" href="https://us.store.bambulab.com/products/s-shape-led-strip-light-ws2812b-rgb" rel="nofollow noopener">Led strip</a></li></ul>ALL The Crafty Maker designs are protected by Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or reproductions from those files. If you want a commercial license to LEGALLY SELL 3D prints, you'll need a <a target="_blank" href="https://patreon.com/TheCraftyMaker" rel="nofollow noopener">The Crafty Seller Patreon</a> subscription.

Space Shuttle Stained Glass Lightbox

Space 🧑‍🚀🪐

Martin_au

This is a mount for a kinect sensor. Unlike many of the others on thingiverse this one is designed to be a very secure mount, while at the same time allowing the sensor to be easily removed.It uses sliding lugs to securely latch the kinect sensor to the mount. These mounts are tightened and held in place with 20mm M3 bolts and embedded nuts.The mount attaches to either an Arca style tripod mount, or the 19 or 25.4mm pole mounts with a 1/4" bolt (as used in camera equipment).The pole mounts use M5 bolts with embedded nuts.The sensor mount also has two grooves under it, 10mm offset from the mount centre, designed to fit 30.0 x 2.0 x 1.2mm ridges as seen on the arca or pole clamps. They are there to prevent the clamp twisting on the mount. If you wish to design your own clamps, you may want to include these ridges to prevent loosening/twisting.<h3>Print Settings</h3>Printer Brand:WanhaoPrinter: <div>Wanhao Duplicator i3 Plus</div>Rafts:Doesn't MatterSupports: <div>Yes</div>Resolution:0.2Infill: <div>yes. IIRC around 40%</div>Notes:Have a think about the stresses involved in each part.Main mount printed base down.Pins printed on their side to keep their "teeth" strong.Clamp bases printed with the pole side down.Clamps printed vertically to minimise support and avoid having layers running across the clamping surface.Category: Robotics

Kinect sensor mount - locking mount with clamps for arca and pole mounts.

👔Work Related 

martin.prager

Simple detachable 2.5mm steel rod holder. Can be attached also upwards.Connection of parts is tight.One thread insert 2x3mm and one screw 2mm is needed.&nbsp;PLA, layer height 0.15mm

Neje Laser detachable probe mount

⚡️ Laser  ⚡️

PrintBrothers3D

Its a Remix from AKinferno remix :) you find the original on Thingi ID 5383489.The original cames from WheatlyLaboratories Axolotl and McGybeer's "Articulated Lizard" and the head comes from “Schlossbauer” Axolotl.&nbsp;Its painted in Slicer for you - so happy printing in colors … we scaled z up to 150% because the original was to flat :) &nbsp;Cheers BenniPrintBrothers3D

Articulated Axolotl - Multicolor and Singlecolor Profiles

Animals 🦋🐷

hirt.3dprint

The rolls were flying around so I made a little roll dispenser. 5 rolls can fit and it has holes to get mounted on the wall. Print in 0.16 and 3 wallsPaint Support for the long overhang. It is easy to remove and depends on the color you dont see that you was printing with support. The rest don't need Support

Poop bag roll dispenser

Pets 🐶

Jorge Rui

<h2>Description</h2>This is a small and easy to print scraper tool, inspired on 2 pré existing models:<ul><li><a target="_blank" href="https://www.printables.com/model/55519-bed-scraper-fast-print-15min-minimal-filament-usag" rel="nofollow noopener">Bed Scraper</a> by JernejP.</li><li><a target="_blank" href="https://www.printables.com/model/122894-hexscraper-printbed-scraper" rel="nofollow noopener">HexScraper - Printbed scraper</a> by visle</li></ul><h3>Available Modules </h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/119274/2023-10-25_09d1d8510aac5.jpg"></figure><h4>Prepared housing modules for Bambulab 3D printers:</h4><ul><li><a target="_blank" href="https://www.printables.com/model/557566-mmss-2x4-module-glue-stick-and-hexagonal-keys" rel="nofollow noopener">MMSS 2x4 Module - Glue Stick and Hexagonal Keys</a></li><li><a target="_blank" href="https://www.printables.com/model/557452-mmss-1x1-module-microsd" rel="nofollow noopener">MMSS 1x1 Module - MicroSD</a></li><li><a target="_blank" href="https://www.printables.com/model/557397-mmss-1x1-module-nozzle-wipper" rel="nofollow noopener">MMSS 1x1 Module - Nozzle Wipper</a></li><li><a target="_blank" href="https://www.printables.com/model/557390-mmss-1x1-module-filament-cutter-microsd" rel="nofollow noopener">MMSS 1x1 Module - Filament Cutter + MicroSD</a></li><li><a target="_blank" href="https://www.printables.com/model/559405-mmss-1x2-module-hotend-and-silicon-sock" rel="nofollow noopener">MMSS 1x2 Module - Hotend and Silicon Sock</a></li><li><a target="_blank" href="https://www.printables.com/model/561092-mmss-1x3-module-complete-hotend" rel="nofollow noopener">MMSS 1x3 Module - Complete Hotend</a></li><li><a target="_blank" href="https://www.printables.com/model/561215-mmss-2x3-module-small-scraper" rel="nofollow noopener">MMSS 2x3 Module - Small Scraper</a></li><li><a target="_blank" href="https://www.printables.com/model/563010-mmss-2x3-module-pocket-with-lid" rel="nofollow noopener">MMSS 2x3 Module - Pocket with Lid</a><ul><li><a target="_blank" href="https://www.printables.com/model/563208-mmss-various-size-modules-pocket-with-lid" rel="nofollow noopener">Various sizes of pockets with lids.</a></li></ul></li><li><a target="_blank" href="https://www.printables.com/model/564616-mmss-2x5-module-liquid-glue" rel="nofollow noopener">MMSS 2x5 Module - Liquid Glue</a></li><li><a target="_blank" href="https://www.printables.com/model/580675-mmss-2x3-module-spool-holder" rel="nofollow noopener">MMSS 2x3 Module - Spool Holder</a></li><li><a target="_blank" href="https://www.printables.com/model/613965-bambu-lab-ams-service-and-spares-parts-for-the-mms" rel="nofollow noopener">MMSS for AMS Modules</a> <ul><li>4x Active extrusion wheel assembly;</li><li>4x Active support shaft assembly;</li><li>4x PTFE Tube Fast Connector;</li><li>4x Driven Support Shaft Assembly</li><li>1x First Stage Feeder</li></ul></li><li><a target="_blank" href="https://www.printables.com/model/557727-case-with-lid-for-mmss" rel="nofollow noopener">BOX with lid for MMSS</a></li><li><a target="_blank" href="https://www.printables.com/model/556615-case-for-the-mmss" rel="nofollow noopener">Case for MMSS</a></li></ul>&nbsp;The idea was to create a model, easy to print and small, since it is an object with high wear, having to be replaced in a short time.This makes part of a larger project <a target="_blank" href="https://www.printables.com/model/530478-tools-and-accessories-box-for-bambu-printers" rel="nofollow noopener">Tools and Accessories for Bambu Printers</a>This design is free for the benefit of the community, but If you like my designs and want to contribute, you can make a donation to <a target="_blank" href="https://www.buymeacoffee.com/designrepcom" rel="nofollow noopener">buymeacoffee </a>or <a target="_blank" href="https://www.paypal.com/donate/?business=BUM67EMDJRXSN&no_recurring=0&currency_code=EUR" rel="nofollow noopener">paypal, </a>that will be greatly appreciated.

Small scraper Tool - Bambulab edition

3D Printer Maintenance ⚙️

toolmantim313

I designed this because I noticed issues with the PTFE tube going into the hot end. When printing larger pieces where the hot end has to move towards the limits of it's travel, especially in the corners, the tube really pinches and can cause binding on the filament. The standard led riser helps, but doesn't go quite high enough. I replaced the PTFE tube with a slightly longer piece to allow the angle going in to be smoother and more straight. This riser allows ample “head” room plus adds additional functionality with built in vents that you can open and close without having to remove the top glass.&nbsp;Vents use M3 x 10mm SHCS bolts with washers to mount to the main ring.&nbsp;*** Note about the dovetail connections***These are designed to be pretty tight. You will probably need a small block of wood and a hammer or mallet to tap them together. I just set the pieces on a nice flat surface and tapped together till the top is flush.

X1 LED Riser XL

Riser-Vents-Lights

soukup273

A great idea for a international women&#39;s day gift!&nbsp;a beautiful Deffodil with a stem that is suitable for decoration or as a gift. print the parts separately.&nbsp;!assembly requires glue, ideally instant glue or other plastic glue!&nbsp;It looks beautiful as a bouquet in combination with my other models!with Tulip:<a target="_blank" href="https://makerworld.com/de/models/94713#profileId-101302" rel="nofollow noopener">https://makerworld.com/de/models/94713#profileId-101302</a>&nbsp;with Rose:<a target="_blank" href="https://makerworld.com/de/models/89698#profileId-96027" rel="nofollow noopener">https://makerworld.com/de/models/89698#profileId-96027</a>&nbsp;with Deffodil:<a target="_blank" href="https://makerworld.com/de/models/94751#profileId-101334" rel="nofollow noopener">https://makerworld.com/de/models/94751#profileId-101334</a>&nbsp;&nbsp;&nbsp;

Beautiful Daffodil With Stem - mother’s day gift

Flowers  🌻🌹

laisch

<h3>HUGHES MD - 500 (flyable pullcopter) </h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/239508/2023-12-06_sman5x65txu7.gif"></figure>&nbsp;&nbsp;<h3>Externals</h3>For launching the MD-500, you need to make the “<a target="_blank" href="https://makerworld.com/de/models/81500" rel="nofollow noopener">Overpowered Heli Launcher</a>” before:<figure class="image"><a href="https://makerworld.com/de/models/81500" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/239508/2023-12-06_cmrmg9lwcdhu.jpg"></a></figure>&nbsp;<h3>Printingsettings</h3>Print as light as possible. I used 2 perimeter, 0.2mm layerheight and 10% infill on the helicopter body.For the Rotor use Arachne in the slicer.&nbsp;<h3>Postprocessing</h3><figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/239508/2023-12-06_n770l86x94u8.jpg"></figure>Clean the hole for the shaft with an 8mm drill bit. Make it as clean as possible to avoid friction.</td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/239508/2023-12-06_41bpt3jnpijj.jpg"></figure>Add the pins to the body and glue the two haves together with some superglue</td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/239508/2023-12-06_bb2k67jpmjiq.jpg"></figure>Add a drop of superglue into the skid holes and glue the skids in place</td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/239508/2023-12-06_huhj8w7d9shl.jpg"></figure>To make the helicopter fly stable, you have to direct the airflow of the propeller to act as a counterforce against the rotors spinning direction. The easiest way is to make a fin with transparent tape.</td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/239508/2023-12-06_i9cggf52mewy.jpg"></figure>You have to adjust the sice and angle of the tape according to your friction on the shaftTestfly -→ adjust → repeat …</td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/239508/2023-12-06_61dldorkdcxe.jpg"></figure>Mount the rotor to the shaft. It should be friction fit, but if its too lose you can add some superglue. (The rotor should spin freely)</td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/239508/2023-12-06_etlatpk1760y.jpg"></figure>To stop the helicopter from rotating during the launch, you have to add the helistops to your launcher. Just remove the old M3x6 screw and replace it with a M3x10.</td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/239508/2023-12-06_7efl5p749tfj.jpg"></figure>Have Fun</td></tr></tbody></table></figure>&nbsp;

MD-500 (flyable Helicopter)

Toys  🪀

peterow

🌷 Elevate your decor with our stunning 3D printed tulip with a lifelike stem! 🌿Crafted with precision and care, this beautiful tulip replica brings the beauty of spring into your home all year round. 🌼Perfect for adding a touch of nature-inspired elegance to any space, this 3D printed tulip is a conversation starter and a unique piece of art. 🎨Don't miss out on the opportunity to bring everlasting beauty to your surroundings – order yours today! 🛍️🌟&nbsp;Easy to assembly&nbsp;EDIT. Thank you guys for every download and your feedback, I'm glad to hear that and see your results. Check my latest project: Check the new project: <a target="_blank" href="https://makerworld.com/en/models/157402#profileId-172718" rel="nofollow noopener">https://makerworld.com/en/models/157402#profileId-172718</a>&nbsp;<figure class="image image_resized" style="width:41.26%;"><img src="https://makerworld.bblmw.com/makerworld/draft/455219/2024-01-26_e36f241208c27.jpeg"></figure>

Lovely Tulip with Stem, Blooming Perfection

Valentines Day  ❤️

a window scraper that you will certainly use in winter. this is a remix with a flat surface so you can add lettering. also check out my other scrapers with brand logos. if you need a custom sign or other logo, send me a message and I will create it- Prints without support , Has a cord hole on the end

FORD Windshield Scraper

Jameswatts1990

<h2>☢ Toxic Waste Lamp ☢</h2>Light up your office with a freaky toxic glow using this Toxic Waste Lamp. Inspired by the eerie glow of radioactive waste usually spotted in cartoons. Use <a target="_blank" href="https://uk.store.bambulab.com/products/petg-translucent?variant=40926167990332" rel="nofollow noopener">Bambu Lab Transparent PETG teal</a> for the transparent sections for the best results or experiment with other filaments to get unique glows from this lamp.&nbsp;Version 2:<ul><li>New more detailed lamp topper with additional and varied bubble design *recommended*</li><li>Bambu Lab LED 001 compatible version also available</li></ul>07/02/2024 - 2.1 - Large cutout for LED Kit version to allow switch to pass through without modifying the hole manually&nbsp;<h3>✅ Easy to Print</h3>The main body of this toxic waste lamp prints easily, using some minor supports you can get a perfect finish on the overhangs. The colour in the images is <a target="_blank" href="https://uk.store.bambulab.com/products/pla-matte-filament" rel="nofollow noopener">Bambu Matte Lemon Yellow</a>. If you use the .3mf to print, it has 3 walls to block most of the light and the infill has been removed from the front of the model to limit the shadows produced by light leaking through. Only 2 walls were used in the print in the images.&nbsp;<figure class="image image_resized image-style-side" style="width:23.37%;"><img src="https://makerworld.bblmw.com/makerworld/draft/534075/2024-01-28_b05d5b93f51db.jpg"></figure><h3>Transparent Lid and Front</h3>The front and top of this model has been designed to be used with transparent filament, although you can use standard filament as well with 1 wall to get a good glow as well. The .3mf has been edited for the transparent pieces to give them a better finish.&nbsp;The front prints as a 0.6mm thick sheet that is flexible. This allows it to bend and flex in to shape to fit into the supporting sections at the front of the model. As this piece is thin, be careful not to crack it when removing from the bed.&nbsp;The top pieces will simply slot into place atop the model.<h3>💡 Lighting Options</h3><figure class="image image_resized image-style-side" style="width:37%;"><img src="https://makerworld.bblmw.com/makerworld/draft/534075/2024-01-28_542141ac46344.png"></figure>The model has a cutout at the back of the design to allow a <a target="_blank" href="https://amzn.to/488KA2J" rel="nofollow noopener">usb powered LED strip</a> to pass out of in to a battery pack or plug. There is a centre pole to allow you to wrap LED strips around if you wish.&nbsp;<ul><li>Nuclear Waste - LED Strip = LED Strips/Rope style lighting</li><li>Nuclear Waste - LED Kit 001 = Bambu Lab LED KIT 001 Compatible</li></ul>&nbsp;If you need to make the hole at the back larger, you can right click the model in the slicer and click add negative part to make a larger hole. You can also do this on the centre pole to remove it, if you are not using an LED strip.&nbsp;&nbsp;&nbsp;&nbsp;<h3>Why not try?.. </h3><a target="_blank" href="https://makerworld.com/en/models/185216#profileId-203919" rel="nofollow noopener">Magical Potion Night Lights and Alchemy Drawers </a>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/534075/2024-02-13_814df7d9c3c46.jpg"></figure>

Toxic Waste Lamp - Eerie Radioactive Glow v2

Kids Gifts 🎁 👯‍♀️

makerhek

Design created by me with HueForge for any printer. Layered color change with print pause, color change or M600.Image created by me.&nbsp;Swap Instructions: Start with Black At layer #7 (0.56mm) swap to Dark Gray At layer #12 (0.96mm) swap to Gray At layer #16 (1.28mm) swap to White for the rest.

The thinking astronaut

HueForge

jwalker55

A vase with twisting pilars that merge together. Looks especially neat with dual color silk filaments. 160mm tall&nbsp;2 versions are included, a filled version for spiral/vase mode printing, and a version with the internal cavity modeled in case you want to try to make it water tight. Included profile is for vase mode only.

Twisting Pillars Vase

Requires Desktop 🖥️

I&#39;ve made a cute shadow box from Basic PLA for valentine&#39;s day with various designs for the couples. Choose which couple you like most and put a total of 6 inserts (textured side facing down) into &#34;case_front&#34;. They have numbers from 001-006 on the build plates, and should easily slide down into the casing.&nbsp;Depending on which lights you want to use, USB or battery powered you can put fairy lights through the hole of &#34;case_back&#34; and fix them with some tape or use the pegs that are around the hole to form a circle. Check the photos for details. Fix the battery box with double sided tape into it&#39;s place. I bought a 3 meter fairy light (warmwhite) that uses 3x AA batteries so they last way longer than the version with the button cells. For the Amazon link to the warmwhite or RGB fairy lights - scroll all the way down.&nbsp;UPDATE 2024-03-27: created a collection with all my available inserts for the shadowbox. They can be combined with each other <a target="_blank" href="https://makerworld.com/en/@technerd/collections/962148" rel="nofollow noopener">https://makerworld.com/en/@technerd/collections/962148</a>&nbsp;UPDATE 2024-02-12: included STEP files for “007_diy_empty_insert” and &#34;case_back_003_RGB_fairy_lights&#34; if you want to create your own inserts in Fusion360 or change the backplate to fit your own lights.&nbsp;UPDATE 2024-02-02: new “case_back_003_RGB_fairy_lights.stl” now compatible with both models 3m/10ft &amp; 5m/16ft RGB fairy lights - I made the pegs longer &amp; bigger circle diameter to fit the bigger battery box from RGB lights.&nbsp;UPDATE: Btw. you can also use RGB fairy lights - here is what they look like in different colors:&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000156728/design/2024-01-26_002518b3be6b18.jpg"></figure>&nbsp;Print the &#34;case_cap&#34; 2x and slide them over the front and back of the heart. They&#39;re press fit and should stay in place, if not use some drops of glue or double sided tape. The overall size of the box is 215mm x 215mm.&nbsp;For perfect results make sure to use the golden textured PEI plate and calibrate your filament.Check out the Youtube Video below on how to assemble it.&nbsp; Copyright:All my designs are protected by copyright. By downloading, you agree to use the files for personal purposes only. This means that you do NOT have the right to sell 3D prints of the digital files, including selling products made from molds. If you want to sell my prints commercially and legally, you can join my Patreon: <a target="_blank" href="https://www.patreon.com/technerd863" rel="nofollow noopener">https://www.patreon.com/technerd863</a> The digital files (STL and other formats) may never be resold, shared, remixed or given away.&nbsp;&nbsp;I will try to add new inserts for the box from time to time. Just check my profile or my collections for new uploads like the new castle Neuschwanstein inserts. Until now these are the included designs here. Happy printing!&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000156728/design/2024-01-25_167328f55390e.jpg"></figure>&nbsp;Btw. these are the fairy lights (warmwhite and RGB) that I got from amazon. Size of the battery box is 74mm x 51mm x 19mm. It has an integrated timer and stays on for 8 hours, so the 3x AA batteries should last 1-2 months. &nbsp;3M warmwhite <a target="_blank" href="https://amzn.to/3V6ZIdr" rel="nofollow noopener">https://amzn.to/3V6ZIdr</a>5M RGB with remote control <a target="_blank" href="https://amzn.to/44UPHDw" rel="nofollow noopener">https://amzn.to/44UPHDw</a>(I may earn a commission if you use the above Amazon Affiliate links. This will help me to upload the designs for private use for free)&nbsp;The new “case_back_003_RGB_fairy_lights” is compatible with both models RGB and warmwhite!&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000156728/design/2024-02-02_87cee228f36e2.jpeg"></figure>&nbsp;New Inserts! Castle Neuschwanstein. Download them here: <a target="_blank" href="https://makerworld.com/en/models/167285" rel="nofollow noopener">https://makerworld.com/en/models/167285</a>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000156728/design/2024-02-02_736a10798e406.jpg"></figure>&nbsp;

Lovers Valentine Day Shadowbox

Lithophane 💡 🖼️

<h3>Introduction</h3>Once again, this project brings something that might be new to some – The printing of translucent materials.&nbsp;This version of the capsule is for the A1 and includes areas for:<ul><li><a target="_blank" href="https://shrsl.com/4cxx1" rel="nofollow noopener">Color Swatches</a></li><li>All nozzle Sizes:<ul><li><a target="_blank" href="https://shrsl.com/4cpof" rel="nofollow noopener">0.8 nozzle</a></li><li><a target="_blank" href="https://shrsl.com/4cpoa" rel="nofollow noopener">0.6 nozzle</a></li><li><a target="_blank" href="https://shrsl.com/4cpo5" rel="nofollow noopener">0.4 nozzle</a></li><li><a target="_blank" href="https://shrsl.com/4cpo4" rel="nofollow noopener">0.2 nozzle</a></li></ul></li><li><a target="_blank" href="https://shrsl.com/4cxx7" rel="nofollow noopener">Heatbed Nozzle Wiper - A1 mini</a> (A1 coming)</li><li><a target="_blank" href="https://shrsl.com/4cxx9" rel="nofollow noopener">Replacement Filament Cutter - A1 Series</a></li></ul><blockquote>If you need any of this, use this links, I will get a small help and will cost you the same.</blockquote>Once again, this project brings something that might be new to some – The printing of <a target="_blank" href="https://shrsl.com/4cpnz" rel="nofollow noopener">translucent materials</a>.Despite being discussed in previous projects, it&#39;s something I find interesting and quite challenging to achieve with an FDM printer like the A1. The trick is to print slowly and at a high temperature, as <a target="_blank" href="https://www.printables.com/model/15310-how-to-print-glass" rel="nofollow noopener">widely shared on the internet</a>. With this information in mind, it becomes evident that increasing the number of layers will result in a higher level of opacity for the wall. If you possess a nozzle with a diameter of <a target="_blank" href="https://shrsl.com/4cpoa" rel="nofollow noopener">0.6mm</a> or even<a target="_blank" href="https://shrsl.com/4cpof" rel="nofollow noopener"> 0.8mm</a>, now is the opportune moment to employ it. Experimentation is key in determining what works best for your specific needs, as optimal results may be influenced by various variables. Your goal is to achieve both translucency and mechanical resistance, making it essential to explore and find the most suitable approach for your desired outcome.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/858127/2023-12-17_xpz0vhypcghc.jpg"></figure>For achieving a &#34;frost&#34; effect, a <a target="_blank" href="https://shrsl.com/4cpo5" rel="nofollow noopener">0.4mm nozzle</a> is the optimal choice. Remarkably, there&#39;s no need for any intricate settings—simply stick to the default ones, and the outcome will perfectly mirror the images you&#39;ve seen. Ensuring the material, especially <a target="_blank" href="https://shrsl.com/4cpnz" rel="nofollow noopener">transparent PETG</a>, is as dry as possible is paramount. Excess moisture significantly impacts the performance of this material. Additionally, transparent PLA is also available for those seeking alternatives.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/858127/2023-12-17_4vh9za6wdlcy.jpg"></figure>Regarding the base, you can make a <a target="_blank" href="https://shrsl.com/4cpo2" rel="nofollow noopener">TPU</a> Ring or you can use a foam with the same shape. If you are interested in a foam ring, please send me a message.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/858127/2023-12-17_3ax0jmktu7kn.jpg"></figure><h4>Suspended swatches configuration</h4>This effect can be easily achieved with a downloadable special part.You can find these color swatches <a target="_blank" href="https://shrsl.com/4cxx1" rel="nofollow noopener">here</a>.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/858127/2023-12-17_la0pf6c2guv5.jpeg"></figure><figure class="media"><div data-oembed-url="https://youtu.be/VvQqCIBVtO4"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/VvQqCIBVtO4" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>Just change the filament settings as needed to suite your preferences, all the rest should be ok.This design is free for the benefit of the community, but If you like my designs and want to contribute, you can make a donation on <a target="_blank" href="https://www.paypal.com/donate/?business=BUM67EMDJRXSN&amp;no_recurring=0&amp;currency_code=EUR" rel="nofollow noopener">PayPal</a>&nbsp;For a small help, use this affiliate link to buy filament, it will cost you the same. Thanks!<a target="_blank" href="https://shareasale.com/r.cfm?b=2354730&amp;u=4026304&amp;m=138211&amp;urllink=&amp;afftrack=" rel="nofollow noopener">Filaments used on this project</a>&nbsp;<h3>Change log</h3><ul><li>(09-01-2024) - Added the A1 printer Bottom part<ul><li>(15-04-2024) Update to the A1 (not mini) bottom part. This printer has a larger Silicone nozzle now wiper, and no metallic nozzle scraper, so I&#39;ve added 2more areas for screws, and more pockets (Bottom_ring_A1.3mf). You will need more 4 magnets, total 6 magnets of 10x3mm.</li></ul></li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/858127/2024-04-15_580f0dd622053.jpg"></figure>

Ergo Capsule A1

Filament Upgrades ⬆️ 🧵

TotalChaos

Made this stackable solution for all bambu bits and pieces to keep my printer space neat and tidy. Each body slots into each other making it one streamline unit. I thought I would share it with everyone because there was nothing on offer that allows you to customise the storage to your needs. Slim Draw (Requires Slim Body)insert 1 offer a wide range of storage with dedicated slots for hotends, wipers + screws, nozzle socks ect Slim Draw (Requires Slim Body)insert 2 offers a split section for odds and ends including pliers & cuttersFat Draw (Requires Fat Body) insert 1 offers a wide range of storage with dedicated slots for hotends, full assembly hotends, glue stick & scrapers ect MEGA UPDATE FOR A1 MINI OWNERS! I have released an A1 mini version of the Tidy System, you can find it using the link below: https://makerworld.com/en/models/80083#profileId-85022 UPDATE: 26/11/23  New Added Draws  1. Fat & Slim - Empty draws2. Slim Draw quad sections UPDATE: 27/11/23 ALL NEW COLOUR SAMPLE FILAMENT TIDY DRAW! <a target="_blank" href="https://makerworld.com/en/models/75661#profileId-80194" rel="nofollow noopener">https://makerworld.com/en/models/75661#profileId-80194</a> UPDATE: 28/11/23 Build Plate Module! <a target="_blank" href="https://makerworld.com/en/models/76785#profileId-81260" rel="nofollow noopener">https://makerworld.com/en/models/71878#profileId-76020</a> UPDATE: 30/11/23 Tidy System Top Caddy  <a target="_blank" href="https://makerworld.com/en/models/78869#profileId-83174" rel="nofollow noopener">https://makerworld.com/en/models/78869#profileId-83174</a> UPDATE: 30/11/23 Top Plate Added to Profile & Raw Download UPDATE: 04/12/23 Only Hotend Slim Draw Added (NOT FULL ASSEMBLY HOTENDS) ADDED PRINT PROFILE AND RAW DOWNLOAD Only Complete Hotend Fat Draw Added (FULL ASSEMBLY HOTENDS) ADDED PRINT PROFILE AND RAW DOWNLOAD UPDATE: 05/12/23Slim A1 Mini Accessory Draw ADDED PRINT PROFILE AND RAW DOWNLOAD  UPDATE: 11/12/23 Slim Colour Swatch Draw<a target="_blank" href="https://makerworld.com/en/models/89524#profileId-95815" rel="nofollow noopener">https://makerworld.com/en/models/89524#profileId-95815</a> UPDATE: 14/12/23 Fat Max Body + Boxed Spares Draw<a target="_blank" href="https://makerworld.com/en/models/92978#profileId-99395" rel="nofollow noopener">https://makerworld.com/en/models/89524#profileId-95815</a> UPDATE: 21/12/23 - NEW NEW DRAWS ADDED! Fat Max Draw Split Style 1 & 2 <a target="_blank" href="https://makerworld.com/en/models/101894#profileId-108493" rel="nofollow noopener">https://makerworld.com/en/models/101894#profileId-108493</a> <a target="_blank" href="https://makerworld.com/en/models/101902#profileId-108499" rel="nofollow noopener">https://makerworld.com/en/models/101902#profileId-108499</a> UPDATE: 25/12/23 NEW SLIM BLANK DRAW INSERTS! <a target="_blank" href="https://makerworld.com/en/models/106310#profileId-113505" rel="nofollow noopener">DOWNLOAD HERE</a> UPDATE: 29/12/23  FAT DRAW ALTERNATIVE WITH FULLY ASSEMBLED HOTENDS  <a target="_blank" href="https://makerworld.com/en/models/112956#profileId-121316" rel="nofollow noopener">DOWNLOAD HERE</a> TIDY SYSTEM TOP CADDY ALTERNATIVE VERSION <a target="_blank" href="https://makerworld.com/en/models/112974#profileId-121339" rel="nofollow noopener">DOWNLOAD HERE</a> UPDATE: 20/01/24 - NEW TIDY SYSTEM CONNECT -CONNECT MUTIPLE SYSTEMS TOGETHER! <a target="_blank" href="https://makerworld.com/en/models/148632#profileId-162200" rel="nofollow noopener">DOWNLOAD HERE</a>  More draw insert options to come!

Tidy System Customizable Stackable Box - Storage that grows with your needs!

3D Printing Upgrades ⬆️ 🖨️

TrendtB

Make your kitchen herb gardening easy - ideal for busy cooks and gardening enthusiasts, this planter ensures your herbs stay hydrated and fresh, even on your busiest days. If you're an avid cook, or know someone that is - start printing now and add a touch of green to those kitchen counters!&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/323633/2023-12-29_27004b97fd569.gif"><figcaption>Make various patterns and arrangements with multiple planters</figcaption></figure>&nbsp;Inspired by my wife's passion for cooking with fresh herbs, this planter is designed to blend seamlessly into any kitchen aesthetic. Perfect for those who appreciate both functionality and style in their cooking space.&nbsp;<h3>KEY FEATURES</h3><ul><li>Easy Self-Watering: Built-in reservoir keeps herbs hydrated.</li><li>Artistic Design: Intricate floral pattern forming a love heart, adding a decorative touch.</li><li>Dual-Purpose Base: Use a standalone base as a stylish container for herb gardening tools.</li><li>Batch Printing Profiles: Optimized for quick and efficient batch printing.</li></ul>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/323633/2023-12-29_0b77f080a19a4.gif"><figcaption>The floral design allows you to play with different patterns depending on how the planter is placed.</figcaption></figure>&nbsp;&nbsp;<h3>HOW IT WORKS</h3>The planter is designed to slowly absorb water from the reservoir (base), which you occasionally top up with water. There is a seam that acts as a guide for how far to fill. Don't fill over this line or water will be pushed out through the top!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/323633/2023-12-29_f7d43224f4262.gif"><figcaption>The base acts as a reservoir of water - fill to just below the seam then place your plant on top</figcaption></figure>&nbsp;When you're planting your herb in the top half, it is recommended to use a wicking material at the very bottom. This helps to slowly absorb water into the soil and roots. You can place a couple of cotton balls / cotton wool in the bottom of the pot to do this. Then fill with soil, and your herb of choice.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/323633/2023-12-29_d13556ba7b91.gif"><figcaption>Place cotton wool into the bottom of the pot to act as a wicking material.</figcaption></figure>&nbsp;&nbsp;<h3>PRINT SETTINGS</h3>Use the designer profiles to ensure the base is water-tight, or you'll risk water seeping through the print! If you're looking to adjust the profile, or build your own - these are the key settings to maintain ensure there are no leaks:<ul><li>Infill overlap: 50%</li><li>Walls: 3</li><li>Top shell layers: 5</li></ul>Additional profiles have been provided to batch print, or print using a single plate and color.

Self-watering Herb Planter for the kitchen

Gardening 🌱

Bambu Lab

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000013717/design/2023-09-19_9f3e533f94456.jpg"></figure>This LED lamp project offers two types of 3D-printed lamps. Type A features a hollowed-out and angular design, while Type B showcases textured and wavy patterns. To achieve the best lighting and shadow effects while maintaining a balance between translucency and light guidance, we have carefully selected suitable LED light sources and recommend using Bambu PLA Basic Jade White filament for this project.&nbsp;Recommended filaments: Bambu PLA Basic Jade White<a target="_blank" href="https://store.bambulab.com/products/pla-basic-filament?variant=40820833517683" rel="nofollow noopener">https://store.bambulab.com/products/pla-basic-filament?variant=40820833517683</a>Hardware Kit: LED Lamp Kit-001<a target="_blank" href="http://store.bambulab.com/products/led-lamp-kit-001" rel="nofollow noopener">http://store.bambulab.com/products/led-lamp-kit-001</a>&nbsp;Please make sure you clean the build plate before printing and/or applying glue to prevent print failures.&nbsp;Follow the Assembly Guide below step by step to print and assemble your build. Refer to the Design Guide for further design and quality enhancement.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000013717/design/2023-09-15_31832bf687dbb.png"></figure>

LED Lamp 001

Home Decor ⚜️

squinn

This print-in-place locking bag clip has been designed so that it can be printed without supports, has a fun curvy shape, uses an outward angled handle for easier one-handed use, and is a nice size at just under 6 cm when closed.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3485677045/draft/2023-09-21_kei37ynb43g3.gif"></figure>I'd recommend you set the “Strength→ Wall Loops" option to at least 5 for increased strength. In addition to the STL, I'm also attaching the Fusion360 file if you'd like to make adjustments.&nbsp;The original “Cam Lock Bag Clip.stl” (which I'd still recommend you start with if you're printing in PLA) is designed with a .2 mm tolerance around the pivot joints. If you have trouble with the plastic fusing in your print conditions though or are printing in other materials - such as PETG, I've now also attached two versions that increase the spacing tolerance slightly (.3 mm and .4 mm) which you could use as an alternative.&nbsp;This is a complete from-scratch design, but there are many great cam locking clips. Although notably different, I've marked this model as a remix of the very cool model that ‘jfedor’ did which used a similar approach for making a clip printable without requiring supports (which itself was a remix of Andrei's popular version that does require supports).

Curvy Cam Lock Bag Clip

Tools 🛠️

This is a protective front cover for the Revopoint Inspire 3D scanner. If your printer's extrusion flow is calibrated, it should friction fit pretty nicely.&nbsp;Update 10/11/23: Added a 2nd stl with a looser fit (scaled to 100.5% per user feedback). If you find that it fits a bit too tight for your liking, you can either scale the original to 100.5% in your slicer, or download the pre-scaled version included here named “Revopoint Inspire Cover - Looser.stl”

Revopoint Inspire Front Cover

3D Scanner 📸

Jordan Proctor Designs

This Aztec Pattern Planter is the perfect size for any small to medium cacti, succulent, or other houseplant. The design includes a series of drainage holes, as well as an optional, custom-fitted drip tray. The default size of the planter is 4 inches in height with a 4 inch diameter opening. The model can be easily scaled up or down for any size plant.

Aztec Pattern Debossed Planter Pot, with Drainage Holes, Drip Tray

Home Decor - Vases 🏺

NUKDDD

please give me a 👍🏻 if you like this, even if you don&#39;t download this, it’ll help more people discover this. thanks so much! Follow me for more to come.&nbsp;Stumpy, the Short Shroom. These adorable, eye catching mushroom tea lights can be used all year round, not just at parties.&nbsp;Printed with Bambu&#39;s <a target="_blank" href="https://shrsl.com/4gfvl" rel="nofollow noopener">Basic</a> and <a target="_blank" href="https://shrsl.com/4gfae" rel="nofollow noopener">Matte PLA</a>&nbsp;The stump can hold up to 39mm LED tea light candles. The print profile is print by object, 2 color print, but you can choose the same filament and print both in the same color before you send it to the printer.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/849423/2023-12-15_774a7907e5d78.gif"><figcaption>2 parts, easy to assemble. Tops are printed with pastel blue, green, pink and yellow, the stumps are all white.</figcaption></figure>&nbsp;There are small overhangs at the bottom of the stump, but you can&#39;t really tell if you print it in white like I did, I think it looks more organic that way, therefore, no support for the stump.&nbsp;You can support me by using my affiliate link to purchase <a target="_blank" href="https://amzn.to/3JiVXuY" rel="nofollow noopener">the LED candle</a> I purchased in my video and photos. I may earn a small commission.&nbsp;If you&#39;re careful and have steady hands, you can stack multiples of these very high.&nbsp;Checkout my other lights: &nbsp;<a target="_blank" href="https://makerworld.com/models/162497" rel="nofollow noopener">Felix, the Flexi Shroom</a>.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/849423/2024-01-30_35ae5eb1c61068.jpeg"></figure>&nbsp;Meet <a target="_blank" href="https://makerworld.com/en/models/86208#profileId-92095" rel="nofollow noopener">Teeny</a>, the tiny tree.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/849423/2023-12-15_411c2252fc6c1.gif"></figure>Don&#39;t forget to check out <a target="_blank" href="https://makerworld.com/en/models/127134#profileId-137541" rel="nofollow noopener">Shady, the Slim Shroom</a>.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/849423/2024-01-06_7a65931f4aab7.jpg"></figure>Disclaimer: This model is part of the Creator Program, When you purchase the Lamp Kit 001 or filament through the links provided, creators may earn an affiliate commission as a reward of their work. (The creator program is currently in the trial phase. The application is not yet open to public.)

Stumpy Mushroom Lamp

Lights 💡🛋️

Makerspace.Online

A 3D printable Businesscard embosser, can be assembled without any hardware, everything just snaps together. I designed this businesscard embosser to be modular and 3D printable without using any support and without any hardware required to assemble. The tollerances are tight. And some materials work better then others. I have had best results using Basic PLA. Available patterns:3 Rollers available, more patterns can be found on <a target="_blank" href="https://makerworld.com/en/u/2755972568" rel="nofollow noopener">my makerworld page!</a> - Confetti - ZigZag - Polkadot Assembly:  (Pro tip: use some lubrication grease / vaseline around the gears for a better working!!) <img src="https://makerworld.bblmw.com/makerworld/draft/470906/2024-01-20_cca5dc6403a79.png"> Make sure to allight the bottom gears maked with the dot and allign with the stipe.  Do not forget to add some lubrication / grease between and underneath the gears! <img src="https://makerworld.bblmw.com/makerworld/draft/470906/2024-01-20_d2c9531e7e588.png"> For the top gears some marks are present as well to allign the gears properly! Also here! Do not forget to add some lubrication / grease between and underneath the gears!<img src="https://makerworld.bblmw.com/makerworld/draft/470906/2024-01-20_2b0339c954b2b.png"> Note:  This design is licensed under a <a target="_blank" href="https://creativecommons.org/licenses/by-nc-sa/4.0/" rel="nofollow noopener">Creative Commons Attribution-Noncommercial-Share Alike</a> Please do not sell this file or printed product.

Business Card Embosser - Level up your business cards! 

Work

bnull49

This is a model of Miss Darth Vader created by FIVENIGHTS. https://cults3d.com/en/3d-model/art/star-wars-miss-darth-vader-fivenights-2

STAR WARS - MISS DARTH VADER

Funny

Tailored3D

My wife wanted to buy some of the new fabric/knitted/crochet pumpkins to decorate our house, because Fall… 10-15 bucks for a small little pumpkin? Hold my beer! &nbsp;I have designed several decorative pumpkins which will apparently be taking residence on my living room mantle with Fall inspired miniature gnomes and fake flowers for the near foreseeable future. As you can likely tell, I am not able to contain all this fall excitement and wanted share these models with the community so you too can get in touch with your inner “basic white girl”, preferably while sipping on a pumpkin spice latte. &nbsp;This first design was printed in matte green Polymaker PLA with tuned settings for my X1C. I highly suggest you run your own calibration for your desired filament. The infill is set to lightening to help cut down on the print time as this is a decorative piece but any infill at your preference around 10-15% should be adequate. I printed at 0.12 layer height with a 0.4 mm nozzle on standard Bambu speed settings with painted tree supports on the bottom. &nbsp;Let me know what you think, and I will be posting the other versions as I am able to print off more for our home. Upcoming models include crocheted as seen on the smaller pumpkin, thicker crocheted, and carved. &nbsp;The attached raw file is high poly count. MakerWorld unfortunately is not letting me add the .3mf profile as it is timing out slicing during the verification process. Please see the attached example picture for how I set up the supports using manual tree supports.

Knitted Pumpkin Decoration #1

Halloween 🎃

Martin Kozak

Check my other slinky model: <a target="_blank" href="https://makerworld.com/en/models/86400#profileId-92384" rel="nofollow noopener">Slinky snowman</a>&nbsp;Proper print parameters are crucial. It is recommended to use provided Designer's print profile!&nbsp;<h3>Print parameters</h3>0.15 mm layer height, 0.97 flow rate, 90 mm outer wall/inner wall/internal solid infill speed, lot of cooling. Use modifier to add more weight to the base (for example use more perimeters for first 3 mm). Ignore warning about “floating cantilever”. PLA works fine.<h3>Postproduction</h3>Use sharp knife or spatula to separate individual layers of spring apart. Be careful not to cut yourself. Glue in star.

Slinky christmas tree

🎄Christmas 🎄

This .3mf for 3DBenchy uses the same setting as the sliced file “SpeedBoatRace_Bambu Pla Basic” in the A1 mini SD card . The print time is around 12min42s .As the printer profile & filament profile is modified a lot , so please use the "Open in Bambu Studio" button to import the .3mf into the Bambu Studio.Note : <ol><li>The bottom layers in “SpeedBoatRace_Bambu Pla Basic.gcode.3mf” in some early produced A1 mini was wrongly set to 2 , which should be 3, this .3mf fix this .</li><li>As the first layer speed is fast , the adhession is critical , so make sure that the build plate is carefully washed before print .</li></ol>&nbsp;#3DBenchy3DBenchy.com

SpeedBoatRace_Bambu Pla Basic

Calibration Tests

xuhao3e8

Here shows my own design, the Aurora, or 极光. It's an incredibly cool FPV cruiser that offers high speed and agility.<img src="https://makerworld.bblmw.com/makerworld/draft/352540/2023-12-18_07413e4f4b99.png">The design of Aurora is inspired by the IJN J7W Shinden and XP-55, with the addition of modern aircraft elements.Including full-span canard, strakes (although they serve mostly as decorative elements), and winglets.It comes with a <a target="_blank" href="https://www.printables.com/model/567442-dji-o3-air-unit-ptz" rel="nofollow noopener">servo gimbal (included in this model, remix from FLY_101</a>) and cooling system for the DJI O3. So great if you wish to use a headtracker on it.&nbsp;The flying speed is fast, with a cruising speed of 70kph (20m/s), and it can easily reach 100-130kph, pulling 3-4g maneuvers. A large area is required for flying, and it is completely unsuitable for park flying. When the flying speed exceeds 100kph, noticeable vibrations occur in the gimbal, severely affecting the flying experience, necessitating targeted optimization in the design. Here are some basic details:<ul><li>Wing Span: 1030mm</li><li>Weight (4s 18650, no gimbal & FPV system): ~1000g</li><li>Weight (with 4s18650 battery, with gimbal & FPV system): 1170g</li><li>Estimated endurance time: 30-45 minutes (theoretically, still testing)</li><li>Cruising speed: 20m/s-30m/s, 70km/h to 110km/h</li></ul>Tested avionics:<ul><li>Flight Controller: SpeedBee F405 Wing with BZ182 GPS.</li><li>ESC: Any 30A ESC is OK</li><li>FPV system: DJI O3</li><li>Servo: Kingmax KM0940MD*4 (for flight control), and GDW DS014MG*2, 280deg/180deg (for servo gimbal)</li><li>Motor: SunnySky X2216 KV1400</li><li>Propeller: APC/Gemfan 8*6-9*6, this may push you to 100kph or faster.</li><li>Battery: Sony VTC6 18650 4s1p</li></ul>Extra components:<ul><li>Carbon fiber pole:<ul><li>2*6x4x550</li><li>1*6x4x585</li><li>1*6x4x935</li><li>3*3x250</li><li>1*3x150</li></ul></li></ul>Four 6mm (diameter) x3mm (height) magnets for battery and flight controller canopy.&nbsp;The core design concept of Aurora includes:<ul><li>Appealing aesthetics</li><li>Decent endurance time</li><li>Relatively high speed.</li></ul><h2>Printing</h2><h3>Suggest print material:</h3>Fusrock/Bambu PLA Aero.I use Bambu PLA-Aero white for Wing, and FuskRock Gray PLA Aero for Fuselage. Use PLA-Aero from two manufacturer just because colors.<h3>BE CAREFUL GO SETUP CORRECT PRINTING SETTINGS FOR FILAMENTS!</h3>Default setting is for PLA-Aero, change it according to your own filaments. Strongly suggest print Aurora with PLA-Aero.<h3>3D printer</h3>Tested on Bambu Lab X1CC, suggest Bambu Machines with size=256mm<h2>Print profiles:</h2>Fuselage, wings and extra component are placed in different print profiles. They have different slice settings.<h2>Flying Video:</h2>(Click to watch if you see video unavailable)<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=-W8qLUvWbIY"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/-W8qLUvWbIY" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>对于中文用户，可以观看bilibili和简介中的介绍:<figure class="media"><div data-oembed-url="https://www.bilibili.com/video/BV1xj411W7ry/"><div class="ck-media__wrapper" data-oembed-url="https://player.bilibili.com/player.html?bvid=BV1xj411W7ry&autoplay=0&poster=1"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://player.bilibili.com/player.html?bvid=BV1xj411W7ry&autoplay=0&poster=1" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>&nbsp;Gimbal system of Aurora is remix from <a target="_blank" href="https://www.thingiverse.com/thing:6193480" rel="nofollow noopener">https://www.thingiverse.com/thing:6193480</a> by <a target="_blank" href="https://www.thingiverse.com/FLY_101" rel="nofollow noopener">FLY_101</a>.You may also use <a target="_blank" href="https://www.printables.com/model/265534-dji-2-dof-gimbal-for-air-unit-camera/files" rel="nofollow noopener">this gimbal on Aurora</a>&nbsp;<h2>Center of Gravity</h2>Flight with current CG setup (the CG icon) is too stable. You may try the following CG at read line, this is optimal CG point according to my latest CFD results and flight test.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/352540/2023-12-28_43baa86270ef2.png"></figure>&nbsp;<h2>Donation to help me!</h2>Testing and releasing these model aircraft designs is neither easy nor cheap. It requires a significant investment of time and effort. The development cost of this airplane exceeds $1500, and that's not even taking into account my time. If you find my designs practical and useful, please consider making a donation to support my work. Your contributions will greatly assist me in continuing to develop these model aircraft, feel free to buy me a coffee by clicking follow button.<a target="_blank" href="https://www.buymeacoffee.com/xuhao3e8" rel="nofollow noopener"><img src="https://cdn.buymeacoffee.com/buttons/v2/default-yellow.png" alt="Buy Me A Coffee"></a>测试和发布航模并不便宜，这架飞机的开发成本超过万元，并且会花费非常多的时间和精力，如果你觉得我的设计非常实用，请捐款支持我，这将对我能够继续开发航模产生很大的帮助：<figure class="image image_resized" style="width:37.04%;"><img src="https://makerworld.bblmw.com/makerworld/draft/352540/2023-12-27_0ec676d5a355f.jpg"></figure><h2>Build Logs</h2>Build logs (in Chinese) for Aurora is available on <a target="_blank" href="https://xuhao1.notion.site/Aurora-1100-8851f194908a4648b1bb22ffa9a7a9cb?pvs=4" rel="nofollow noopener">my notion site,</a> this contains every detail you may want to know about Aurora.<h2>Update since upload</h2>2023/12/21: Update to integrated vertical tail and rudder: do not need manually install hinge. I put the old design of vertial tail in supported files.2023/12/23: Missing fuselage part is added to fuselage.3MF. Servo gimbal is also added to extras.3MF with original author's approval.<h2>Some details</h2>More details will be adding later.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/352540/2023-12-18_f29fd3e4a7b4a.png"></figure><figure class="image image_resized" style="width:58.84%;"><img src="https://makerworld.bblmw.com/makerworld/draft/352540/2023-12-22_d5a12ad1a93b4.jpg"></figure><figure class="image image_resized" style="width:56.85%;"><img src="https://makerworld.bblmw.com/makerworld/draft/352540/2023-12-18_3cd4e9ee5e9cc.jpeg"></figure><figure class="image image_resized" style="width:62.08%;"><img src="https://makerworld.bblmw.com/makerworld/draft/352540/2023-12-18_b01c294f7d8c7.png"></figure><figure class="image image_resized" style="width:53.14%;"><img src="https://makerworld.bblmw.com/makerworld/draft/352540/2023-12-18_12f6f67c86d8d.jpeg"></figure><figure class="image image_resized" style="width:54.3%;"><img src="https://makerworld.bblmw.com/makerworld/draft/352540/2023-12-18_d359d7203dc83.png"></figure><figure class="image image_resized" style="width:55.2%;"><img src="https://makerworld.bblmw.com/makerworld/draft/352540/2023-12-18_f582829daf851.png"></figure>

Aurora: Fixed-Wing FPV Cruiser

Big Projects

3D Print Masters Hub

LARGE Stackable Basket-Great for organizing misc hardware parts, batteries, screws, clips and more!-Easy print.-Scale down as needed.-Please like and subscribe! More to come!-See bio for more exclusive print project ideas.🔥🔥 Check out my PRO MODELS HERE! <a target="_blank" href="https://cults3d.com/en/users/FabulousFilaments/3d-models" rel="nofollow noopener">https://cults3d.com/en/users/FabulousFilaments/3d-models</a> 🔥🔥

LARGE Stackable Basket

Home Storage

E9-3D

Please consider supporting me with a boost on the new system, would love to have more recourses available to make and share Models!! Made this Headset stand of spiderman. Printet like a boss and now i have a cool place to store my headset slicer says floating object, just ignore this , it will print fine 0.2mm layerhight. No support. lightning infill 15 %. gyriod infill for the buttom part. 3 walls Make sure to check out my other headset stands. * Black Panther - https://makerworld.com/en/models/176323#profileId-193839 **Thanos - https://makerworld.com/en/models/162344#profileId-178199 ***Iron man - https://makerworld.com/en/models/126398#profileId-136594 ****Dead Pool - https://makerworld.com/en/models/140981#profileId-153593 Happy Printing

Spiderman Headset Stand

Home Improvements

fay3dlab

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/516818/2023-11-27_8537960efed01.gif"></figure>Here's a new suspended model from my star wars collections.. this time its the Imperial Tie Advance X1 fighter that Darth Vader flew.. as always i remix the fighter ship from thingerverse's Andrew Diehl who modified the model to be printable from Chanson Yang from grabcad.. The model is a simple single print of a skewed hexagon frame with the tie adv in the middle.. this will give it the effect that the tie fighter is climbing and going upwards.. As always i made the frame to look like Deathstar.. This one is a fairly simple print.. one important thing to remember is to set the wall generator to arachne from classic.. this will make the slicer print the strings..I hope you guys have fun printing this suspended tie adv fighter&nbsp;: UPDATE 1 :Someone suggest to separate the ship, strings and the frame so that you can easily put multicolor filament on each of the parts.. so i've uploaded a new version for multicolor prints.. do test it out and tell me if it works.. &nbsp;:UPDATE 2:i have added a LED strip addon that you can attached to the suspended tie fighter.. you dont need to print the whole suspended model again.. the addon uses 50cm LED strips inserted into the addon channel.. you can download the addon here: <a target="_blank" href="https://makerworld.com/en/models/132714#profileId-143896" rel="nofollow noopener">https://makerworld.com/en/models/132714#profileId-143896</a> <img src="https://makerworld.bblmw.com/makerworld/draft/516818/2024-01-11_575645cf6738f.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/516818/2024-01-11_8989eb4b2a91c.jpg">&nbsp;

Suspended Tie Advance X1

Gift Ideas 🎁💡

Wcad00

Update december 1st<ul><li>the chair is modified with a larger magnet hole </li><li>the missiles from the underside launcher are a little smaller</li><li>the back gun now has an aligment to make it easier to fit</li><li>updated the assembly pdf with the underside launcher and cockpit assembly</li></ul>&nbsp;&nbsp;This is my take on a batwing. its 100% my design and a real labor of love for me. assembly is pretty strait forward.the model is almost 80 cm across so be mindful of that. also attached an assembly guide, not the best, but like i said, it shoud be pretty straight forward..all pieces printed perfectly and require no sanding.Hope you enjoy this model and whom ever decides to take on this print please feel free to contact me for anything.its all printed in BL matt charcoal PLA, and i have to say it turned out gorgeousAlso it is split so that all plates print in 1-2 hours, so it minimises the printers usage; there are two exceptions on the large parts of the wings but that is it.&nbsp;Also photos are available athttps://s.go.ro/vs3zltii | password: 230926there are over 60 so i couldnt upload them here.Next few days i will upload better quality photos of the entire plane&nbsp;I also have a project for a batman beyond style vehicle, it will be proportional to this one. so stay tuned if you like my overall aesthetic .