KickingKing

kisik20

Hi guys, i have news for you. I made new crocodile clip is smaller and bether for work in my project flexible arms for soldering. Enjoy Here:https://makerworld.com/en/models/487984

Soldering Tool Holder Flexible Arms - new clip

Tools

EhRabz

Recommend printing in clear PLA so the LED's will shine through , used 5mm ( 3/16" ) steel rods for recinforcement , and the switch to turn lights on / off is built INTO the hilt with magents ( magnets are the contacts )

Frostmourne with LED's and reinforcements 

WarCraft

codehustler

Its a modular formicarium, aka ant farm. For small ants.Nests and arenas can be conneted in multiple ways. Attach more space when your colony grows. Open and close the doors between the habitats.Use 2mm acrylic glas to cover the habitats.Included a drill jig to help you cut out and drill holes into the acrylic glas covers.Print out the hinges to connect the arenas and nests and put a door between them.close all open end tunnels with door plugs.there are two nests. a "dry" nest and a "wet" nest. the "wet" nest has a big center cylinder to store water and distribute it to one corner and two opensings arround the clinder. add some soil, clay or gypsum to cover the water outlets. The water will keep the material moist.

Modular Formicarium // Ant Farm

Ants

modybird

Helldivers 2 strider I extracted from the in game files. Printed with 0.12mm layers and tree supports.&nbsp;Note that its printed upside down to make easier removal of supports. Small details in the model may be lost during printing, post processing is needed to remove supports and to fix small detail imperfections. Feel free to post your optimal support settings!&nbsp;Happy printing helldiver &nbsp;&nbsp;

Helldivers 2 Automaton Strider Walker 

Helldivers

SQDSL_ger

BMW eagle coaster in 100mm including holder&nbsp;BMW Adler Untersetzer in 100mm inklusive Halter

BMW eagle Adler Coaster untersetzer

Auto Moto

DGs 3D-PRINT

Neu 21.01.2024 Ich habe noch ein kleinen Behälter für die Spannzangen hinzugefügt&nbsp;Ein Handgriff mit vielen AnwendungenZangenaufnahme von 2-15mm und weitere Sechskant in Größe 6,8,10,12mmDrei zusätzliche Spannzangen können im Griff verstaut werden.&nbsp;&nbsp;Die Modelle sind nur für den persönlichen Gebrauch (nicht kommerziell) bestimmt.Geben Sie die Dateien nicht an andere weiter!Für individuelle Designs oder kommerzielle Lizenzen können Sie mich gerne kontaktieren.

Handgriff mit vielen Möglichkeiten

TheBear

<h3>Ho Ho Ho, and a Merry Christmas! </h3>Presenting the 5 gram Christmas Gift Bow!Easy to print, easy to assemble and easy to enjoy! Personally, I suck at making a nice bow on Christmas Gifts. I am, however, quite good at letting my 3D-printer do the work for me, while I sit back and relax. So, here we are! (Make sure to check out my <a target="_blank" href="https://makerworld.com/en/models/79308#profileId-86446" rel="nofollow noopener">Christmas Twisting Ornament</a>, for another great, low-weight Christmas print!) Update: A smaller version at ~3.4 grams is also available now!Be aware that the smaller version does require tighter bending, so the flexibility of your PLA needs to be even higher. I have tested it with a few of the regular PLAs I currently have in stock, and all worked fine. But your mileage may vary. Just be extra careful when bending. And if it keeps failing, consider just sticking to the standard version or follow the tip at the bottom of this description :-) <h2>Assembly</h2>Assembly is done by first feeding the top ribbon through the slots at the bottom, and then pressing it onto the circle mount in the middle (slightly bending the ribbon first does make the assembly a bit easier - please refer to my poorly filmed assembly video below). After that, the rest of the ribbons can be inserted under the middle and pressed onto the circle mount in any order, you like! The ribbons are supposed to be a bit tight, when pressing them onto the ‘circle mount’ - this is to ensure they stay in place, without having to glue everything in place. I wanted this bow to require no additional materials to assemble! <img src="https://makerworld.bblmw.com/makerworld/draft/275104/2023-11-22_30c06d4ef46c.gif"> If you find the fit to be a bit too tight or a bit too loose, please try changing the X-Y Hole compensation in the Quality-tab in the slicer: <img src="https://makerworld.bblmw.com/makerworld/draft/275104/2023-11-22_100b874fe1c26.png"> Now all that is left to do, is to attach the bow to the gift using some glue/tape/etc. <h3>Filament to Use</h3>I've personally succesfully printed and assembled the bow with both cheap, generic PLA, brand name PLA, PLA+, High-Speed PLA, etc. However, Silk PLA, Matte PLA and other “special” types of PLA might not work as well, as they can be too brittle to bend like this. You could try placing the print on the hot bed, set to 70-80 degrees, to heat up the bow after it has been removed from the build plate. That will soften up the PLA and might make assembly with these materials possible. I personally haven't tested this yet, so I won't guarantee anything :-) Shout-out to Paul Elrod for this idea of heating up the print using the hot bed prior to assembly. If you have issues with the ribbons creasing/breaking, it is often due to how the lines line up with the bend. Changing the Top and Buttom Surfaces to either Concentric can mitigate this issue. Increasing your wall count is also one way of making the print stronger! Merry Christmas and Happy Printing!

Christmas Gift Bow (Foldable)

Gift accessories

Black Glovz

Wall Hanging Cat Decoration Simons cat

Willi 3D

Create a STAP (Single Trooper Aerial Platform) for you or your battle droid.&nbsp;If you like this model, please throw me a like. Designing the models is time, filament and coffee consuming. <a target="_blank" href="https://www.paypal.com/donate/?hosted_button_id=WGL5LXN5EHEXN" rel="nofollow noopener">If you want to support my work bye me a coffee.</a> Thanks!&nbsp;Description:This is a KIT CARD of a Star Wars STAP and compatible with my <a target="_blank" href="https://makerworld.com/de/models/13745?profileId=13463" rel="nofollow noopener">B1 Battle Droid</a>.Scale 1:9 (90% for 1:10)May the force be with you!&nbsp;Update:(02/08/23) -optimized bridging and assembly&nbsp;Printing:Layer height: 0.1Supports: NoBrim: NoMaterial: PETG, (ABS), (PLA)&nbsp;Assembly:The parts are put together as shown in the picture. The handlebar needs to be bent slightly to place the B1 droid on it.

Star Wars STAP Kit Card

Star Wars

Murata

<figure class="media"><oembed url="https://www.youtube.com/watch?v=jArIfws3gts"></oembed></figure>I designed this toy for my 3 year old to play with so it is intended to be robust enough to survive rough play, and the bucket is slightly oversized for more fun. There’s also an accompanying <a target="_blank" href="https://makerworld.com/en/models/58279" rel="nofollow noopener">dump truck model</a>.&nbsp;Please let me know if any parts break and leave feedback on anything that could be improved upon in the design.&nbsp;The final model is roughly 80 mm wide and everything is assembled with snaps (no glue or fasteners). The only tool required is a coin to tighten the body and tracks together. And there is a hollow pocket for some old AA batteries to add a bit of weight to the body. These are purely optional.&nbsp;Most moving parts are designed with 0.2 mm clearances which work fine on the Bambu X1C but might fuse on other printers. If any joints are frozen or too tight to assemble, try setting <a target="_blank" href="https://wiki.bambulab.com/en/software/bambu-studio/xy-hole-contour-compensation" rel="nofollow noopener">XY Contour Compensation </a>to -0.05 mm. The tracks are offered in two variants, 0.15 mm clearance and 0.2 mm clearance in the raw files. My print came out nicely with 0.15 mm clearance track, but I understand this is not possible on all printers. The tracks show the build-plate side, so they will look a bit nicer if printed on a textured plate.&nbsp;<h3>Build Notes</h3>Be careful to install the H-link build plate face out. It’s a common mistake.&nbsp;When loosening joints for the first time, grab or pry as close to the pivot as possible. If a joint is a little bit stiff, it’s pretty easy to snap a piston by pushing on the end.&nbsp;<h3>History</h3>2024-03-30: Added some extra brim to boom cylinders to help with adhesion.2023-12-04: Minor updates to boom to reduce stuck or broken parts and improve bed adhesion.2023-10-13: Several minor design fixes to make parts more robust. I&#39;ve also included half-length track stls for smaller build plates. You need 4 of these per model. And I&#39;ve included a step file of the assembled excavator so that you can preview different colour pallet ideas. And lastly, there is now a single plate profile that crams the whole thing onto one plate if you&#39;re feeling confident and don&#39;t care about colours.

Tracked Excavator

Models

Vixvvo 3D

I've crafted a versatile 3D-modeled desk drawer for you, a compact and customizable space where you can store anything you desire. The best part? It easily attaches with double-sided tape, providing a sleek and hassle-free solution.&nbsp;&nbsp;All Commercial License, Will be available on my Patreon "Vixvvo3D" For a Low Price of 6$/Month. (currently trying to post & model 1/Weeks) <a target="_blank" href="https://patreon.com/Vixvvo3D" rel="nofollow noopener">https://patreon.com/Vixvvo3D</a>&nbsp;

Desk Drawer

Household

My 3D Printing Lab

Decorative Homepod Stand, easy to print.Material: PLA Layer: 0.20 Infill: 20% Support: Yes&nbsp;A like would make my day :)&nbsp;<a target="_blank" href="https://l.facebook.com/l.php?u=https%3A%2F%2Fvm.tiktok.com%2FZGJCmomkc%2F%3Ffbclid%3DIwAR2gydoeLy-jB77HYRC6UsoqQEkCRhxA3DQu5JsrrgIpHAlNKiT_iu_BkJY&h=AT00LOpDG3rCJDxFrheCjld7vzf1aasEATgiMPUTrm16hNzsADhMg_ME6g6cJN4KqueMmcqgUHmBjhgm7_anzvKzh99uiqEfKfKjVAsP1iT_zJ8rhUKq7ojynjvenUtmjnBCGQyxXP9x2BFUyM9Q9A" rel="nofollow noopener">https://vm.tiktok.com/ZGJCmomkc/</a>

Star Wars Homepod Mini Stand - Tie Fighter

Bambu Lab

This 3D printing model is a specialized scraper for removing printed objects from the build plate of a 3D printer. Its sharp and durable edge, ergonomic handle, and versatile design make it a reliable and practical accessory for maintaining the high-quality output of 3D printers.

Bambu Bed Scraper

Bambu Designs

JDJDJD

<h2>Meet the Smoothy!</h2>The Smoothy is a PTFE Bowden Tube Y Connector designed for smooth filament transport without catching or binding. This allows you to use an external spool with your Bambu Lab machine without disconnecting your PTFE Bowden Tubes.&nbsp;PTFE tubes are inserted deep into the connector for less wear on the FDM material. This allows for silky smooth operation.&nbsp;As the filament progresses towards the output, it passes through a precisely-designed taper that mates perfectly with the output bowden tube.&nbsp;All PTFE tubes must be inserted until each “stop” is reached (see cutaway diagram).&nbsp;Connectors must be the black type (not blue). The black connectors allow the PTFE tube to “pass thru” which is required for the design to work smoothly: <a target="_blank" href="https://www.amazon.com/gp/product/B0B97RWKQR/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&amp;th=1" rel="nofollow noopener">https://www.amazon.com/gp/product/B0B97RWKQR/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&amp;th=1</a>&nbsp;<h2>BENEFITS:</h2><ul><li>No Supports</li><li>No Overhangs</li><li>No Brims</li><li>Optimized Geometry</li><li>Designed for FDM Printing</li><li>Smooth Operation</li><li>Supports both PC4-M6 and PC4-M10 “pass thru“ connectors</li><li>Free to Download!</li></ul><h2>UPDATES:</h2><ul><li>The Smoothy Mount is now available! Download here: <a target="_blank" href="https://makerworld.com/en/models/18190" rel="nofollow noopener">https://makerworld.com/en/models/18190</a> The mount is not required, but available to those who prefer to attach the Smoothy to their machines. Without the mount, it can simply rest in-line.</li><li>Both PC4-M6 and PC4-M10 connectors are now supported.</li></ul><h2>TIPS:</h2><ul><li>Make sure ALL bowden tubes are FULLY inserted until each one reaches its stop point. See cutaway diagram for an illustration.</li><li>The output tube does not insert as deep as the input tubes.</li><li>After inserting each tube, you can rotate the tubes back and forth while pressing inward slightly to make sure they&#39;re seated squarely and fully.</li><li>Glue Stick is recommended.</li><li>PTFE tubes must be cut squarely at the tip (no angled tips).</li><li>All PC4 connectors must be installed for a completed design with smooth operation.</li><li>Tested with a 0.4mm Nozzle and 0.2mm Layer Height.</li><li>Print vertically with wide dual-port side on the bed.</li><li>PC4 connectors typically have tapered threads. As such, make sure you don&#39;t over-tighten them as they can create a “wedge effect” and can cause damage.</li></ul><h2>NOTES:</h2><ul><li>These work well printed in PLA. More durable materials can be used, but it may require clearance adjustments.</li><li>I’m currently using this for my Bambu Lab X1C with an AMS, which utilizes an external spool.</li><li>This is the first model that I&#39;m sharing, I hope you enjoy it!</li><li>The Smoothy can be used commercially, but can&#39;t be resold.</li></ul>

Tools

WarCraft

Ants

Helldivers

Auto Moto

Tools

Gift accessories

Cat

Star Wars

Models

Household

Star Wars

Bambu Designs

3d Printers