KennethNilssen

Print3DZ

Upgrade your Tesla Model 3/Y with this backlit modular center console organizer tray. Designed to enhance both functionality and aesthetics, this organizer integrates seamlessly with your vehicle, offering personalized organization and aesthetics. <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000157141/design/2024-02-02_12ea2bd476fb.gif"> Update: Added the STLs for a version that is 10mm longer, if the current version is a bit too small for you. The only downside of this version is the single wall is easier to accidentally slot in wrong. Other than that it works well! Features Overview<ul><li>Ambient Backlit Design: The tray is designed to utilize the existing light within the center console, featuring a clear back section to allow for illumination, for enhanced visibility and aesthetic appeal.  </li><li>Modularity &amp; Color Customization: The organizer tray includes various inserts that can be positioned anywhere within the tray to customize compartment sizes and arrangements. Allowing for both functional, and aesthetic color customization.  </li><li>2 Tray Options: Select from a tray featuring a J1772 adapter hole or opt for a streamlined, flat tray design.  </li><li>Sliding Mechanism: The tray is designed to slide within the center console&#39;s grooves, allowing for easy access to both the tray and the storage area beneath it.   </li><li>Aesthetic Design Elements: The tray features grooves that not only secure the inserts but also create a textured, visually appealing effect.   </li></ul>Organizer Inserts Single wall divider insert:<ul><li>The divider wall offers unparalleled flexibility, allowing placement anywhere within the tray—even snugly against the edge, blending in seamlessly when not in use. This versatility means the divider can function as both a practical compartment separator and an aesthetic element, by printing the divider in a contrasting color to add personalized customization without the printing waist!</li></ul> Multi wall inserts, with two design types each:<ul><li>With a floor: which can be useful for color customization or to cover the J1772 hole if it&#39;s not in use.  </li><li>Without a floor: utilizing the tray&#39;s base as the bottom surface, ideal for lighter customization needs or to accommodate the J1772 adapter hole.  </li></ul><figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000157141/design/2024-02-02_90abd931c290a.gif"></figure> Tray 3-D printing considerations:<ul><li>The tray is designed for vertical printing, this streamlines the process by requiring just a single color change and eliminating the need for support structures.   </li><li>All multicolor inserts only need a single color change.  </li><li>I used PLA-CF for all the colors, except for clear PLA for the backlight.</li></ul> Please let me know if you have any questions, and feel free to create your own modules to put inside the tray for even further customization! 😊 If you like my work, you can buy me a coffee here: https://www.paypal.com/paypalme/zowou

Tesla Model 3/Y Modular Backlit Center ConsoleTray

Tesla

Modelicious Creations

Plant or seeling label. Intentionally left blank. You can either use Bambu Studio to add a text or print them directly and label them afterwards.&nbsp;The height is about 110 cm and the width is 18 mm.

Plant or Seedling Label for Your Own Text

Planter

huma_meng

Check out the Gridfinity Ultra-Light Bin System. With so much to print in the Gridfinity universe, this system helps you save time, filament and money, allowing you to print even more Gridfinity stuff...&nbsp;It all started with the <a target="_blank" href="https://www.printables.com/model/265271-gridfinity-lite-economical-plain-storage-bins" rel="nofollow noopener">Gridfinity Lite Bins from Jake</a>. But I thought maybe they could be even lighter without losing stability. So, I redesigned them from the ground up and achieved an ultra-light version of it that is not a flimsy as a vase mode bin.To put it in perspective for a 3x4x6 bin:<ul><li>Slicer: OrcaSlicer</li><li>Printer: BambuLab P1S</li><li>Layer Height: 0.20 mm</li><li>Wall Loops: 2</li><li>Top/Bottom Shell layers: 3</li><li>Sparse Infill Density: 10%</li></ul><figure class="table" style="width:99.9%;"><table><tbody><tr><td style="background-color:hsl(120, 75%, 60%);width:33.3%;">Version</td><td style="background-color:hsl(120, 75%, 60%);width:33.3%;">Filament Usage</td><td style="background-color:hsl(120, 75%, 60%);width:33.3%;">Print Time</td></tr><tr><td style="width:33.3%;"><a target="_blank" href="https://www.printables.com/model/184201-gridfinity-plain-bins/files" rel="nofollow noopener">Original Bin</a></td><td style="width:33.3%;">98.06 g</td><td style="width:33.3%;">2 h 37 min</td></tr><tr><td style="width:33.3%;"><a target="_blank" href="https://www.printables.com/model/265271-gridfinity-lite-economical-plain-storage-bins" rel="nofollow noopener">Lite Version</a></td><td style="width:33.3%;">83.01 g</td><td style="width:33.3%;">2 h 10 m</td></tr><tr><td style="width:33.3%;">Ultra Light Version</td><td style="width:33.3%;">61.96 g</td><td style="width:33.3%;">1 h 31 min</td></tr></tbody></table></figure>In comparison to the original, this version saves approximately 37% of filament and about 42% of print time. Compared to the lite version, it saves about 25% of filament and around 30% of print time – savings that can be reinvested in more Gridfinity stuff. ;)&nbsp;If you encounter any issues when printing the bins or need a size that is not available, please feel free to let me know. I will either fix the error or upload the missing parts.&nbsp;Happy printing :)&nbsp;<h3>Other Editions</h3><figure class="table" style="width:80%;"><table><tbody><tr><td style="text-align:center;width:50%;"><a target="_blank" href="https://makerworld.com/en/models/228212" rel="nofollow noopener">Plain Label Edition</a>Plain bins with labels</td><td style="width:50%;"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/640846/2024-03-05_e0a09f3767c6f.png"></figure></td></tr></tbody></table></figure>&nbsp;<h3>How to find your bin</h3>The first two numbers indicate the grids in the X and Y directions. One grid is 42 x 42 mm. So, for example, a 2x3x_ box would be 84 mm in the X direction and 126 mm in the Y direction.<figure class="image image-style-align-center"><img src="https://media.printables.com/media/prints/627719/rich_content/a4da4e15-79e3-49c7-b431-38f7454231cd/thumbs/cover/800x470/png/unbenannt.webp"></figure>The third number indicates the height of a box. One height unit is 7 mm. On top of that height comes a lip with approximately 4.4 mm of height to stack the next box onto it. So, for example, a _x_x3 would be around about 25.4 mm high. If you want to know more, there is a very good <a target="_blank" href="https://gridfinity.xyz/specification/" rel="nofollow noopener">website</a>, where all the specifications are explained.&nbsp;<h3>Changelog</h3><figure class="table" style="width:100%;"><table><thead><tr><th style="background-color:hsl(120, 75%, 60%);width:15.5%;">Date</th><th style="background-color:hsl(120, 75%, 60%);width:12%;">Version</th><th style="background-color:hsl(120, 75%, 60%);width:23%;">Type</th><th style="background-color:hsl(120, 75%, 60%);">Comment</th></tr></thead><tbody><tr><td style="width:15.5%;">2024-03-05</td><td style="text-align:center;width:12%;">V2.0</td><td style="width:23%;">Release</td><td> </td></tr></tbody></table></figure>&nbsp;

Gridfinity Ultra Light Bins - Plain Edition

Gridfinity

MakerWorld

Used to display various signs designed by you, compatible with the template ‘ATTENTION Fast Print Underway’.&nbsp;Print time: 34 mins&nbsp;Recommended filaments: PLA Basic&nbsp;Hotend: 0.4mm Hardened Steel&nbsp;<figure class="image image_resized" style="width:75.56%;"><img src="https://makerworld.bblmw.com/makerworld/draft/176710/2023-11-09_f7ba20171656d.gif"></figure>&nbsp;

Attention Sign Holder_Make My Sign

Office

Icehorn

A dispenser for Nespresso Vertuo style capsules.&nbsp;Prints with minimal supports and can be attached easily to a wall via double sided tape or similar.

Nespresso Vertuo Coffee Dispenser

Ting til huset

Axel Dreher

Hello friends, I have uploaded a beautiful, extraordinary LED lamp here. It represents a can squeezer that is illuminated. I hope you like it!

Bastl Wastl "On Air" Dosenquetsche LED-Schild

Lightboxes

austinvojta

<blockquote><h3>Buy a printed cube from me directly: <a target="_blank" href="https://austinmakes.etsy.com/listing/1614801206/textured-fidget-infinity-cube-3d-printed" rel="nofollow noopener">AustinMakes.etsy.com</a></h3></blockquote>The latest and greatest fidget cube that you won't be able to set down! Prints in one piece and works right off the print bed.&nbsp;Redesigned ground-up following the success of <a target="_blank" href="https://makerworld.com/en/models/23734" rel="nofollow noopener">Yet Another Fidget Infinity Cube v2</a>, my latest version includes multiple shapes and fun new textures, plus hinges that are even smoother without the need for break-in!<h4>Variations</h4><figure class="table"><table style="border:2px solid hsl(0, 0%, 0%);"><tbody><tr><td style="border:2px solid hsl(0, 0%, 0%);text-align:center;"><figure class="image image_resized" style="width:34.88%;"><a href="https://makerworld.com/en/models/65426" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/338534/2023-11-15_832ffd9a07f34.png"></a></figure><a target="_blank" href="https://makerworld.com/en/models/65426" rel="nofollow noopener">Angled Pack</a> includes:<ul><li>no texture</li><li>honeycomb</li><li>knurled</li></ul></td><td style="border:2px solid hsl(0, 0%, 0%);text-align:center;"><figure class="image image_resized" style="width:34.98%;"><a href="https://makerworld.com/en/models/65442" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/338534/2023-11-15_b386df7193c3d.png"></a></figure><a target="_blank" href="https://makerworld.com/en/models/65442" rel="nofollow noopener">Rounded Pack</a> includes:<ul><li>no texture</li><li>concave</li><li>ribbed</li></ul></td><td style="border:2px solid hsl(0, 0%, 0%);text-align:center;"><figure class="image image_resized" style="width:34.88%;"><a href="https://makerworld.com/en/models/65448" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/338534/2023-11-15_43b7cd34fd3f6.png"></a></figure><a target="_blank" href="https://makerworld.com/en/models/65448" rel="nofollow noopener">Spherical Pack</a> includes:<ul><li>no texture</li><li>grooved</li><li>rippled</li></ul></td></tr></tbody></table></figure><h4>Printing tips</h4><ul><li>use 0.2mm layer height or lower to avoid hinges fusing</li><li>set vertical shells to 2+ perimeters for strength</li><li>try 100% infill for extra satisfaction!</li></ul>

Textured Fidget Infinity Cube: Angled Pack

Julegave

Julia Ebert

This is a big toy human figure that's inspired by a Lego minifigure. I spent a lot of time making this model from scratch to match the original design while making tweaks for tolerances, printability, and strength. While there were a number of minifigure models I found online, most were not designed for printing, which is a particular challenge for the leg, arm, and hand joints. I'm particularly proud of the universal clip I designed for these, which makes for easy assembly and stiff-enough joints to pose your figure.I designed the clips and tolerances for this model to be printed at 100% (10x original Lego scale), but people have previously had success printing my <a href="https://www.printables.com/model/78695-mega-lego-like-skeleton-101-scale" rel="nofollow">10x Lego-like skeleton</a> at smaller scales (eg, 50% or 5x Lego-scale).Now that I have a base model for a Lego-like figure, this opens up a host of options for specific Lego-like figures. If there's something particular you're interested in, leave a comment or send me a message! If you want to make your own modifications, I've included STEP files for all parts (just be sure to give credit for my original design).Fully assembled, this model stands 40 cm (~16 inches) tall. I printed mine with Hatchbox true blue PLA, Hatchbox true red PLA, and Prusament mango yellow PETG.<h4>Printing Instructions</h4>I've included 3MF files for all parts, and parts should import correctly oriented for printing.<ul><li>For PrusaSlicer 2.6+: you just need to load the project file. (This makes use of organic supports, for the legs, which are added with PrusaSlicer 2.6.)</li><li>For other slicers: I've included details about special instructions for all parts, so you should be able to replicate anything necessary for proper printing. Except where otherwise noted, I printed parts in PLA at 0.15mm layer height with 7% cubic infill and without supports.</li></ul>You will need to print:<ul><li><code>32x-connector-pins.3mf</code>: You should need 30 pins for assembly (or 26 if you print the solid head); this has 2 extra just in case. If you have trouble with bed adhesion, add a brim</li></ul><h5>Legs</h5><ul><li><code>legs.3mf</code>: Uses tree supports the top of the lower hole on the leg.</li><li><code>hips.3mf</code></li><li><code>2x-limb-clips.3mf</code>: This file contains two clips. You'll need to print one set of two in the arm/body color, and one set in the leg color. Important: I recommend printing this in PETG or ABS with 25% infill, because it will have to flex and PLA might snap.</li></ul><h5>Body</h5><ul><li><code>arms.3mf</code>: These print with a small surface area on the bed (the wrists), so you might want to add a brim if you have trouble with bed adhesion.</li><li><code>body.3mf</code></li><li><code>2x-limb-clips.3mf</code>: This file contains two clips. You'll need to print one set of two in the arm/body color, and one set in the leg color. Important: I recommend printing this in PETG or ABS with 25% infill, because it will have to flex and PLA might snap.</li></ul><h5>Head & hands</h5><ul><li><code>2x-hands-wrists.3mf</code>: Requires supports on the underside of the wrist clip. Like the limb clips, I recommend printing with PETG (or similar) with 25% infill.</li><li>One of: (all require supports on the underside curve of the head)<ul><li><code>head-face-mmu.3mf</code>: Print the head & face as one part with some sort of multi-material printer (e.g., Prusa MMU or Bambu AMS). Use supports on the underside curve of the head.</li><li><code>split-head.3mf</code> and <code>face.3mf</code>: Print the head (with cutouts) in two pieces. Use pins and glue to connect the halves. Print the face separately and glue it in.</li><li><code>solid-head.3mf</code> and <code>face.3mf</code>: Print the head and face as separate prints. Use supports on the underside curve of the head. Then glue the face parts into the head.</li></ul></li></ul><h4>Assembly Instructions</h4>In addition to the printed parts, you will need cyanoacrylate glue (CA glue/superglue). <h5>Legs</h5><ol><li>Glue the pins into the top of the hip. Add glue to the holes and bottom surface of each of the hip pegs and attach. Important: The slope of each hip peg should be facing out to the sides. If the pins don't want to go together, check that you have this orientation right!</li><li>Use the same gluing approach to attach the limb clips to each side of the hips.</li><li>Gently but firmly press each leg onto the clips. It should snap into place. The hips are symmetric, so you can't put the legs on backwards. This requires a fair bit of force, but you shouldn't need a hammer. If it won't go on, slightly sand or file down the outer head of the limb clip (rather than the inside of the hole on the leg). Warning: The clips are not designed to come out once they're attached, so make sure you're ready.</li></ol><h5>Body</h5><ol><li>Glue the limb clips into each arm, like you did for the legs.</li><li>Glue the wrist onto the hand, with the pins. Because of the relative print orientations here, it's best to use a bit more glue here to make sure it stays on.</li><li>Press each wrist clip into the arm. (They're the same, so you can't put in the wrong hand.)</li><li>Press each arm clip into the body. The body is also symmetric, so you can't put the arms on backwards.</li></ol><h5>Head</h5>If you printed the separate head and face pieces, glue the face pieces into the head. You may need to file or sand some of the face pieces to fit, depending on how well the supports worked.<h4>License Note</h4>This model is marked as non-commercial because I don't want anyone (including myself) having Lego come after them with a lawyer. If you choose to sell prints of this model, you do so at your own risk!

Mega Lego-like Minifigure (10:1 scale)

laisch

<blockquote>Info: The wrench fits for anglegrinder nuts with 35mm hole circle diameter. But like some comments mention there are also other types of nuts with 28 or 20 mm hole distance. Check your dimensions before you print it</blockquote><figure class="image image_resized" style="width:32.61%;"><img src="https://makerworld.bblmw.com/makerworld/draft/165220/2023-11-12_c39e11d978104.png"></figure> Found this Idea in the video of pocket83 and had to do a 3D printed version of it<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=SoMkAkV62v0"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/SoMkAkV62v0" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>The model prints without supports if you use 0.2mm layerheight.&nbsp;For furhter hardware you need at least 2 M5x20mm hex nut screws. You can screw them directly in to the model. If the fit is too tight you can tap the holes before screwing the screws in.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/165220/2023-11-03_tkq9czc274jr.jpg"></figure>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;

Quicky (Angle grinder wrench)

Tools

harrypulvirenti

It is basically an optimisation of the original design but is functionally the same. This remix eliminates a rear wall to use less material and makes overhangs less pronounced to make the model easier to be printed. I strongly recommend using brim to print it if you don't want to see the heel fall.You can find the suggested orientation used to print the object in the images.With the proposed orientation the object should fit without scaling it, you will maybe just need to move it a little bit into position, but some user reported that scaling it down to 95% also works well. &nbsp;I tested it with my X1C and is perfectly compatible. About the P1P the original model was compatible with the P1P without enclosure and this remix have the same compatibility