RavenSystem

EnglischAn egg separator for the thermomix TM6 printed with supports in PETGGeneric PETG settings&nbsp;&nbsp;DeutschEin Ei Trenner für den thermomix TM6 gedruckt mit Supports in PETGGeneric PETG Einstellungen

Thermomix Egg Splitter / Ei Trenner TM6

Küche

Gxrkensalat

<div><h1 class="thing-component-header summary summary">Summary</h1><div>Car hose guide so that the hose no longer gets stuck under the tire when washing the car.You need the following parts:2x Deep groove ball bearing 608 (normal Skateboard Bearing) 2x Allen Screw M8 x 30 ISO 4762 2x Allen Screw M5 x 25 ISO 4762 2x Allen Screw M5 x 12 ISO 4762 2x Nut M8 ISO 4032 2x Nut M5 ISO 4032 6x Washer M8 ISO 7091 2x Heat Set Insert M5 x 5 x 7</div><h1 class="thing-component-header settings print-settings">Print Settings</h1>Printer Brand: <div>Creality</div> <pre><code> Printer: <div>Ender-3 S1 Pro</div></code></pre> Rafts: <div>No</div> <pre><code> Supports: <div>Yes</div></code></pre> Resolution: <div>0.28 mm</div> <pre><code> Infill: <div>15 - 20 %</div></code></pre> Filament: Polymaker Polylite PETG/PLA grey/black<pre><code> Notes: <div>Number of walls: 3</div></code></pre></div>

Car Hose Guide

Tools

andythilo

Printed a few years ago and still sits on my PC. I wanted a more finished front so cut the original nacelle to match the model. Now Bambu have released this model I wanted to share this. &nbsp;You will require 11 x M3 nuts and bolts. The front silver piece clips in place.

Jet Engine Nose Cowl 

Modellbau 

martin.silpoch

rain collector for 80mm tubes with overflow integrated. outlet connector is designed to connect to gardena style quickdisconnect.ASA filament recommended four outside use.&nbsp;

rain collector 80 mm tube - gardena quick connect outlet

Garten

3dprintdude

This is a kit card of a glider. It glides very well if weighted properly. I made this because I saw many kit card airplanes that did not fly and wanted to make one. It must be printed with a 0.05 mm layer height. If the glider nose dives then print out the light weight securer. If the airplane flips backward print out the heavy weight securer. (also make sure that the wings are slanted back to provide lift. If they are slanted forward then the fuselage sides need to swap)&nbsp;Some recommendations for this print are.<ul><li>Clean your print bed before printing.</li><li>Print with around 5% infill.</li><li>Do not print to fast. (stay near 200 m/s or less)</li></ul>

Glider kit card (flies great)

Spielzeug 

SøndaeMedia

<h2>Mood Lamp by SøndaeMedia</h2>This lamp will enhance your home and is also a great gift.We have given this lamp as a gift many times and it always guarantees big happy eyes :)&nbsp;You also need an e27 socket. I prefer to use a fire flickering light as a light source. This creates the best mood.In the pictures the lampshade was printed from Black Forest Filaments PLA Bamboo & Cork. The Matte Green PLA from Geeetech is also a warm mood. I use black PLA CF or PLA Matt for the base.&nbsp;Mood Lamp Base: https://makerworld.com/en/models/178520#profileId-196444&nbsp;&nbsp;Socket: <a target="_blank" href="https://www.amazon.de/ledscom-Textilkabel-Stecker-Schalter-Lampen-Fassung/dp/B09BHFSNVY/ref=nav_ya_signin?crid=235AY65D22LPX&keywords=ledscom%2Be27&qid=1707157807&sprefix=ledscom%2B%2Caps%2C103&sr=8-36&th=1" rel="nofollow noopener">https://www.amazon.de/ledscom-Textilkabel-Stecker-Schalter-Lampen-Fassung/dp/B09BHFSNVY/ref=nav_ya_signin?crid=235AY65D22LPX&keywords=ledscom%2Be27&qid=1707157807&sprefix=ledscom%2B%2Caps%2C103&sr=8-36&th=1</a>&nbsp;Ceiling lamp: https://www.amazon.de/dp/B0B7MHC7RK/ref=sspa_dk_detail_4?psc=1&pd_rd_i=B0B7MHC7RK&pd_rd_w=xKQu0&content-id=amzn1.sym.ae2317a0-2175-4285-af64-66539858231f&pf_rd_p=ae2317a0-2175-4285-af64-66539858231f&pf_rd_r=GM1JG1TRC1F9ZSZY8SHA&pd_rd_wg=gkqgE&pd_rd_r=93a6b637-f9a1-4e4c-bb89-727c0a6868b0&s=industrial&sp_csd=d2lkZ2V0TmFtZT1zcF9kZXRhaWw&nbsp;Bulb: <a target="_blank" href="https://www.amazon.de/s?k=leuchtmittel+feuer&crid=6YO43B1RSMP0&sprefix=Feuer+leucht%2Caps%2C114&ref=nb_sb_ss_ts-doa-p_2_12" rel="nofollow noopener">https://www.amazon.de/s?k=leuchtmittel+feuer&crid=6YO43B1RSMP0&sprefix=Feuer+leucht%2Caps%2C114&ref=nb_sb_ss_ts-doa-p_2_12</a>&nbsp;

Mood Lamp

Lampen 

urzhiataer

Hi maker,This is a power strip holder for your skadis panel. Like a basket, just leave your power strip in.&nbsp;I saw that some users have difficulty for printing. I recommend PLA, and in addition, if you have an AMS, use W support filament, to make it easier to clean the supports. <blockquote>If you like or print it, report here please</blockquote>

SKADIS - Lateral Power Strip

Ordnung und so

RP47 Designs

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Filaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ Sunlu Grey Transmission Distance: 2 PLA+ Sunlu White Transmission Distance: 5&nbsp;Swap Instructions: Start with Black At layer #17 (1.44mm) swap to Grey At layer #23 (1.92mm) swap to White for the rest.

Moon Couple Hueforge

Kunst

Printednest

All about this projects: <a target="_blank" href="https://www.printednest.com/bird-feeder-4-0" rel="nofollow noopener">Birdfeeder 4.0 and Birdfeeder 4.5</a>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/463556/2024-01-13_eea23c9b49d5e.jpg"></figure>&nbsp;Video assembly instructions:<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=c_i_i1VTPBo"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/c_i_i1VTPBo" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;!!! Information for the fine print:  This model does not need supports. Use our 3mf file. We put a large brim for better adhesion of the print. If you are using stl file, add at least a 40mm brim in your print setup. At the same time, it does not speed up printing to a higher speed than is set.  make sure the PEI sheet is properly cleaned and for better adhesion use a spray or whatever you are using !!!&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/463556/2024-01-24_ae27263cb617e.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/463556/2024-01-24_8f02661e257ef.png"></figure>&nbsp;&nbsp;Update 28/1 - This model should not be a problem to print without support. Anyway, since we see that some of you have a problem printing this model, we are adding ready-made 3mf profiles with added supports. They are tree-like and set on critical spots.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/463556/2024-01-28_8fe77828efcd1.png"></figure>&nbsp;More info about on our <a target="_blank" href="https://www.youtube.com/printednest" rel="nofollow noopener">Youtube Channel</a> facebook: <a target="_blank" href="https://www.facebook.com/printednest" rel="nofollow noopener">https://www.facebook.com/printednest</a>Printednest Makers | 3d Print Group: <a target="_blank" href="https://www.facebook.com/groups/printednest" rel="nofollow noopener">https://www.facebook.com/groups/printednest</a>twitter: <a target="_blank" href="https://twitter.com/printednest" rel="nofollow noopener">https://twitter.com/printednest</a>instagram: <a target="_blank" href="https://www.instagram.com/printednest/" rel="nofollow noopener">https://www.instagram.com/printednest/</a>&nbsp;&nbsp;&nbsp;&nbsp;