Kanye_Tha_Giant

Whimsii3D

This spool holder uses a green AMS Lite spool spindle (counter clockwise) and an A1 spool holder filament guide. &nbsp;I've been using mine printed in PLA with no strength concerns. Has three countersunk holes used to mount the bracket to the wall. Also, depending on how far away from the printer you plan on mounting the bracket, you may need to ectend your bowden tube.

AMS Lite Spool Holder Wall Mount with A1 Filament Guide

tpu ams

MakerVerse Designs

Fully 3d printed crocs shoes<ul><li>Printed with Overture TPU</li><li>PLA for the snap button</li></ul>Important notes:<ul><li>It is for EU shoe size number 42 (male), but you can scale every part (CrocsL1,CrocsR1,Holder,Mount1,Mount2) to your size (use uniform scaling)</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425034/design/2024-04-19_0266f756a989a.png"></figure><ul><li>If the shoe is too big to fit to the printers height, use the “WithSupport”-Version, rotate in Y-Axis (green) and use the cut tool in Bambu Studio to create a new flat surface parallel to the print bed<ul><li>I uploaded an .stl file without cut on the bottom for better scaling</li></ul></li></ul>&nbsp;<ul><li>There are two ways to print this:</li></ul><ol><li>Use a textured PEI bed and print it standing up without support</li><li>Or use another not so sticky bed and print it standing up with support</li></ol><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425034/design/2024-04-12_cc0523cbae068.png">&nbsp;If you can&#39;t get enough of printed shoes, check out my new model (Slide Shoes, Adilette):<a target="_blank" href="https://makerworld.com/en/models/488792#profileId-401842" rel="nofollow noopener">https://makerworld.com/en/models/488792#profileId-401842</a><img class="image_resized" style="width: 41.76%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425034/design/2024-06-08_bb258037ea2a1.png">Have fun with it and leave a like or subscribe if you like it!If there are any suggestions for improvement, feel free to write a comment.

Crocs Shoes - Fully 3d-printed

funny

How2Texan

This is my TPU retraction test. There are many like it but this one is mine.I was trying to calibrate 75a TPE for my drag racer tires and standard retraction models were not cutting it for me. So i hopped into cad and made this little thing up. Print it, check for excessive blobs or pock marks, adjust settings, repeat.Easy. I was able to calibrate the TPE to print a significantly nicer model in ⅓ the time of the first tire.

TPU Retraction Test

stamp

BillyMayonaiz

Hello!&nbsp;The 3mf of this benchy can be imported to either Bambu Studio or Orca Slicer (I am using Orca Slicer), and can be used as potentially optimal profiles for TPU printing, specifically Overture (as it is a low entry price for TPU). As a breakdown:<ul><li>Filament Profile: Overture TPU - Black: This config is for the filament. The print shown above is done with recently opened TPU from Overture (like the morning before posting this), so if you get different results with blobs/underextruding, dry your filament.</li><li>Print Profile: 0.20mm Standard - TPU: This config is for all the process settings. Basically, the main thing is that the printer will be printing slow. It needs to to be able to print TPU reliably.</li></ul>This print was made with only the part cooling fan. If printing with a P1S, just make sure to open either your top cover or the front door to allow for ventilation. I also am running stock everything else, so whatever machine you got out of the box, this profile should be close enough to work.&nbsp;Hope this works!&nbsp;*Obligatory benchy included for print model

P1S/P1P Overture TPU Config File

profiles 

Titan3DPrintingAU

Single bed print of a Mandalorian Helmet. Have included the Raw files as well as the file broken up (in RAW form)

Mandalorian Helmet

Functional Prints

Gyroid

<a target="_blank" href="https://makerworld.com/en/models/177852#profileId-195692" rel="nofollow noopener">v2 out now! Stronger with less flex and only slightly more filament.</a>&nbsp;Looking for a reusable spool with 4 different infill patterns on the same spool? <a target="_blank" href="https://makerworld.com/en/models/152830#profileId-166926" rel="nofollow noopener">Check out my latest model here.</a>&nbsp;---&nbsp;Calling all gyroid bros!&nbsp;&nbsp;Gyroid infill is all the rage. It's the strongest and coolest infill style, so why not have it on display while your filament spools rotate?&nbsp;&nbsp;Well now you can!&nbsp;&nbsp;Introducing my Bambu Lab Reusable Spool remix with visible gyroid pattern. This fully supports all Bambu Lab refills.&nbsp;&nbsp;This remix is based off the official Bambu Lab reusable spool model, so it functions exactly like the official spool, except has the added benefit of a very cool gyroid pattern holding it all together! It also uses significantly less filament.&nbsp;&nbsp;Not enough gyroid for you? Well guess what? The infill of the solid parts is also gyroid! An absolute must for all gyroid fanboys (and girls) to show off your obsession.&nbsp;&nbsp;Can I change any settings?I would strongly advise you to NOT change any settings or modifiers in the print profile. I've spent a lot of time getting the right balance of strength and coolness, so each setting is there for a reason. The only settings you can change are filament settings if you want to print in something other than PLA.&nbsp;&nbsp;What's the best filament to print this in?PLA, PLA+, PLA Tough etc. are my favs here. To preserve the strength, it must print well and these print the best without missing a beat. If you dry a lot of filament, print them in PETG or ABS to avoid warping in filament dryers. Do not put this in a filament dryer if you printed using PLA or PLA variants!&nbsp;&nbsp;Why doesn't the gyroid pattern cover the whole side?Alright, calm down, I know you want maximum gyroid but there are some limitations! I tried many prints with gyroid the whole way around but unfortunately some solid parts are needed or the spool is way too flexible. This is the best of both worlds - strength and plenty of gyroid. If anyone wants this model I can add it - just leave a comment.&nbsp;&nbsp;When I attach the spools, I can hear clicking. Should I be worried?No, this is normal! The RFID tag may gently scrape against the gyroid pattern when closing the spool. Just keep going until it clicks in place.&nbsp;&nbsp;Will this block my RFID readability?Nope! Your AMS will read the tags fine with this reusable spool.&nbsp;&nbsp;Do I need to use the spacing shim?It's been added as a 3rd plate because the official Bambu Lab version uses it. I have never need it personally so I don't bother, but you can use it if you like.&nbsp;&nbsp;&nbsp;Please let me know what you think and let's see some photos showing off your super cool gyroid pattern spools!

GYROID Pattern Reusable Spool - Bambu Lab Refill Compatible - Filament Saver

next print

StefanWox

Attention! There seem to be several versions of the AMS where the slots differ from this version. Please check before printing if the version fits. I try to get the dimensions of the other version and will then upload the bracket in the adapted version!I added a design drawing with measurements please check it! Here is the Variation for the 3 slotted AMS Version.&nbsp;Nothing special - just a quick Design to mount the AMS on the wall.Works fine for me. If there are any Problems, don't hesitate to contact me!Recommended print settings: 5 Walls/Perimeters, 5 Top/Bottom, 35% infill with ABSFor example <a target="_blank" href="https://www.nobufil.com/abs-filament" rel="nofollow noopener">https://www.nobufil.com/abs-filament</a> which is currently the best ABS i know! Perfect layer bonding, ok smell, great colors (even Sparkle ones) - and recycled out of industrial ABS. No, i'm not working there, just impressed.

Wallmount for Bambu AMS 

Willi 3D

This is a spool holder for the <a target="_blank" href="https://www.printables.com/model/152592-honeycomb-storage-wall" rel="nofollow noopener">honeycomb wall system</a> from <a target="_blank" href="https://www.printables.com/@RostaP" rel="nofollow noopener">RostaP</a>. This is compatible with my <a target="_blank" href="https://makerworld.com/de/models/51390#profileId-53174" rel="nofollow noopener">[BaBo duo] riser modul</a> in the honeycomb version but also for any other application with honeycomb wall system. Printed bearings in size DIN625-608 are included, but you can also use real ball bearings if you have them.&nbsp;There is an additional filament guide that works with the <a target="_blank" href="https://eu.store.bambulab.com/de/collections/accessories-for-x1-series/products/ptfe-tube-connector" rel="nofollow noopener">Bambu Lab connector</a>. (See image.)&nbsp;Optionally, the spool holder and the filament guide can be screwed to hexagonal plates from the rear.&nbsp;&nbsp;Big thanks to <a target="_blank" href="https://www.printables.com/@printingbuddy" rel="nofollow noopener">printingbuddy</a> for testing.

spoolholder for honeycomb

hex wall

marcopiazzo95

The written number, expressed in millimeters, represents the distance between the outer wall and the inner wall. The difference in diameter is twofoldOnly 3 grams.&nbsp;The 0.05 gap should only be free to spin if you print with a 0.2mm nozzle. With the 0.4mm nozzle the slicer does not consider the 0.05mm gap and fuses the 2 parts together, it is not a printer error.&nbsp;&nbsp;Il numero scritto, espresso in millimetri, rappresenta la distanza tra la parete esterna e quella interna. La differenza sul diametro è doppia.Solo 3 grammi&nbsp;Lo spazio 0.05 dovrebbe essere libero di girare solo se stampi con un ugello da 0.2mm. Con l'ugello da 0.4mm lo slicer non considera lo spazio di 0.05mm e fonde assieme le 2 parti, non è un errore della stampante.

Tollerance Test 3 grams

Test Prints

ordnerino

Design The base is tilted by 14 degrees, which enables the optimal ejection of ground material. The tilting angle also helps to remove all the grist from the grinder. In addition, clogging of the chute is prevented. There is a platform at the ejection point of the regrind to also catch the particles flying around. To ensure that the grinded material also lands in the supplied cup, it is magnetically positioned.&nbsp;If you'd like to buy a finished product <a href="https://finecoar.com/collections/all" rel="nofollow">visit my newly made store :)</a>&nbsp;Details<ul><li>Classically elegant design in matte black</li><li>14 degree tilt angle of the grinder</li><li>Non-slip stand</li><li>Platform to bring the cup to the optimal height</li><li>Magnetic cup</li></ul>&nbsp;What you'll need4 pcs. 20x2mm magnets that get glued into the prints. Both the cup and pedestral and the pedestral and the base have cavities. The base has recesses for rubbery feet (25x3mm). &nbsp;Compatibility These extensions have been designed and tested with the Eureka Mignon Manule/Facile. Normally, these extensions should fit any Eureka Mignon grinder that has a small, single-colour dial on the right-hand side. So the Specialita, Manuale, Silenzio, Facile, Filtro and Puristico. The grinders with a larger wheel, XL, Perfetto, Libra, will most likely not fit. On Printables are the 3D files to check the fit. We are working quickly to test and add new models! For further suggestions or questions, <a href="https://finecoar.com/pages/contact" rel="nofollow">don't hesitate to drop us a line!</a>

Tilted Base and Magnetic Dosing Cup for Eureka Mignon

Espresso

mcmaven

This is a 3D-printed model of a triple-axis tourbillon, which is based on the tourbillon in a Jacob and Co. Twin Turbo Furious watch. A tourbillon is a mechanism employed to counteract the effects of gravity within a watch. This intricate model includes an escape wheel, triple-axis outer frame, and a base with an integrated motor. It functions on the same fundamental principles as a traditional watch tourbillon.&nbsp;With precise assembly and calibration of the escape wheel, spring, and base drive gear, this tourbillon can smoothly rotate in three axes and maintain accurate timekeeping. The provided print settings in the Triple-axis Tourbillon Model for Kit-007.3mf file are already customized to ensure that all screw holes are clear and ready for assembly.&nbsp;Printed plastic ‘screws’ are printed to scale and used as caps to cover the steel screws that actually hold it together.<a target="_blank" href="https://youtu.be/2-7S2i6AUyM" rel="nofollow noopener">Here </a>is a real-time video of the tourbillion in action.&nbsp;Note: There are two different designs defined for the Tourbillon: the 3MF version and the STL version.&nbsp;The 3MF (Triple-axis Tourbillon Model for Kit-007.3mf file) version was designed specifically to work with Bambu printers and the Bambu slicer, and uses the Triple-axis Tourbillon Model Hardware Kit motor to drive it. It is a slightly modified version of the original STL tourbillon version. To build the 3MF version you only need to order the <a target="_blank" href="https://shrsl.com/4d484" rel="nofollow noopener">Triple-axis Tourbillon Model Hardware Kit</a>, which provides all the non-printed parts (screws, bearings, shafts cut to length, motor, etc.) needed to build a complete model. <a target="_blank" href="https://www.youtube.com/watch?v=HRNbihDXNwE" rel="nofollow noopener">Here </a>is a video of assembling the 3MF version with the Bambu 007 hardware kit. Note that some of the sections in the Furious Build Notes PDF file below also apply to assembling the 3MF version, with the primary difference being the construction and components of the Base and the drive mechanism.&nbsp;The STL (Raw Model Files) version is a set od files that was designed to work with any printer or slicer. It also uses a more complex Arduino controlled stepper motor mechanism to drive it. To build the STL version you can order a kit of all the non-printed parts <a target="_blank" href="https://www.makerrx.com/collections/projectkits/products/twin-turbo-furious-tourbillon-kit" rel="nofollow noopener">here</a>, otherwise you will need to order the parts listed in the Furious Build Notes PDF instructions individually. If you order the STL version of the hardware kit or buy the parts yourself, you will need to program the firmware into the Arduino before it will work. The Furious Build Notes PDF file below, describes the assembly process for the STL version. For some of the larger parts, ‘full’ (e.g., Base Outer Ring.STL) and ‘split’ versions (Base Outer Ring a.STL and Base Outer Ring b.STL) of the same part are included. The ‘full’ parts require at least a 220x220 bed for printing. The ‘split’ parts may be printed separately on a diagonal on a smaller bed, then glued together to form the larger part.&nbsp;The following filaments can be used to create a model that looks like the pictured gold, silver, copper and black version:<ul><li><a target="_blank" href="https://shrsl.com/4cim5" rel="nofollow noopener">PLA Silk Gold</a></li><li><a target="_blank" href="https://shrsl.com/4cim4" rel="nofollow noopener">PLA Silk Silver</a></li><li><a target="_blank" href="https://shrsl.com/4cim3" rel="nofollow noopener">PLA Silk Copper</a></li><li><a target="_blank" href="https://shrsl.com/4cim2" rel="nofollow noopener">PLA Basic Black</a></li></ul>Here is a video of the construction of the 007 kit. And some sections in the Furious Build Notes.PDF file may be useful for constructing the 007 kit.<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=bHEU9rnnu88"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/bHEU9rnnu88" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;Disclaimer: This model is part of the Creator Program, When you purchase the Triple-axis Tourbillon Model Components Kit through the links below, creators may earn an affiliate commission as a reward of their work. (The creator program is currently in the trial phase. The application is not yet open to public.)&nbsp;The Hardware Kit for the Triple-axis Tourbillon Model for Kit-007.3mf file can be found here: <a target="_blank" href="https://shrsl.com/4d484" rel="nofollow noopener">Triple-axis Tourbillon Model Hardware Kit</a><a target="_blank" href="https://shrsl.com/4cfzj" rel="nofollow noopener">.</a>