KanoaN

Der3De

percussion frog / frosch instrumental 

樂器

Tech Syndicate

Hello Everyone!!!This is a model I have been working on for a while now based off of Godzilla from the new Godzilla X KongThe design is inspired from the few screenshots of the character and the funkopop that recently came out,&nbsp;I am posting both print profiles, 1 with the 3 colors and the other with just the black. more colors can be added, specifically red to the tongue but that is up to the amount of time you are willing to spend on this print &nbsp;This was designed in nomadsculpt and as of now there is no way for me to make it in pieces. &nbsp;finally keep in mind this print creates a lot of poop, so keep your bucket close!!I Hope you like it

Evolved Godzilla (GXK)

模型公仔

Valeria Momo

Can a benchy be useful and beautiful at the same time? I think so! Look at this benchy robe hanger to place on the shower glass (max 8 mm). The benchy has 2 pins (one on the back, and one on the front), so you can hang both a bathrobe and a sponge.&nbsp;<figure class="image"></figure>

Benchy Glass Shower Towel Hook

浴室用品

Whopper Printing

FULLY Print-in-Place, NO support required. The trailers are modular and can be swapped! More trailers to come!&nbsp;The trailers easily snap into the truck and can be easily swapped. If you enjoy this model, you'll love my other print-in-place models, just check my profile!More trailers to come! Join my Printables Club or <a target="_blank" href="https://patreon.com/whopperprinting" rel="nofollow noopener">Patreon </a>below. More paid models available on <a target="_blank" href="https://whopperprinting.com/" rel="nofollow noopener">my website.</a> Make design suggestions on <a target="_blank" href="https://discord.gg/UfyQhUfn4N" rel="nofollow noopener">my Discord!</a>If you would like to support me, consider these options:Join my Printables Club or my <a target="_blank" href="https://patreon.com/whopperprinting" rel="nofollow noopener">Patreon</a>!Social Links:<ul><li><a target="_blank" href="https://whopperprinting.com/" rel="nofollow noopener">WhopperPrinting.com</a></li><li><a target="_blank" href="https://patreon.com/whopperprinting" rel="nofollow noopener">Patreon</a></li><li><a target="_blank" href="https://whopperprinting.Etsy.com" rel="nofollow noopener">Etsy</a></li><li><a target="_blank" href="https://instagram.com/whopperprinting" rel="nofollow noopener">Instagram</a></li><li><a target="_blank" href="https://discord.gg/UfyQhUfn4N" rel="nofollow noopener">Discord</a></li><li><a target="_blank" href="https://www.tiktok.com/@whopperprinting" rel="nofollow noopener">TikTok</a></li></ul>

Print-in-Place 18 Wheeler (With Modular Trailers)

車類

entroisdimensions_figurine

Pidgeotto is now available, and you have the choice between different file formats:<ul><li>STL</li><li>3mf for Multicolor Bambu Lab printer</li><li>3mf for Multicolor Prusa printer</li></ul>Video of printing the model: <a target="_blank" href="https://www.instagram.com/polymaker_figurines/" rel="nofollow noopener">Instagram</a>, <a target="_blank" href="https://www.tiktok.com/@polymaker_figurines" rel="nofollow noopener">TikTok</a>, <a target="_blank" href="https://www.youtube.com/channel/UCScmlttdRwRbBA61ZGlUVJg" rel="nofollow noopener">YouTube</a> For printing, I used PolyTerra PLA filament from Polymaker: 7 colors version:<ul><li><a target="_blank" href="https://us.polymaker.com/products/polyterra-pla?variant=39574351642681" rel="nofollow noopener">PolyTerra PLA Wood Brown </a>(for body)</li><li><a target="_blank" href="https://us.polymaker.com/products/polyterra-pla?variant=39574351216697" rel="nofollow noopener">PolyTerra PLA Army Beige</a> (for belly, wingtips and eyebrow)</li><li><a target="_blank" href="https://us.polymaker.com/products/polyterra-pla?variant=39574351970361" rel="nofollow noopener">PolyTerra PLA Pastel Candy</a> (for leg and beak)</li><li><a target="_blank" href="https://us.polymaker.com/products/polyterra-pla?variant=39574351282233" rel="nofollow noopener">PolyTerra PLA Charcoal Black</a> (for eye contours and pupil)</li><li><a target="_blank" href="https://us.polymaker.com/products/polyterra-pla?variant=39574352232505" rel="nofollow noopener">PolyTerra PLA Cotton White</a> ( for eyes and claw)</li><li><a target="_blank" href="https://us.polymaker.com/products/polyterra-pla?variant=39574352298041" rel="nofollow noopener">PolyTerra PLA Savannah Yellow</a> (back feather)</li><li><a target="_blank" href="https://us.polymaker.com/products/polyterra-pla?variant=39574352134201" rel="nofollow noopener">PolyTerra PLA Pastel Watermelon</a> (wick and back feathers)</li></ul>To discover which new models will be released next, follow @polymaker_figurines: <a target="_blank" href="https://www.instagram.com/polymaker_figurines/" rel="nofollow noopener">Instagram</a>, <a target="_blank" href="https://www.tiktok.com/@polymaker_figurines" rel="nofollow noopener">TikTok</a>, <a target="_blank" href="https://www.youtube.com/channel/UCScmlttdRwRbBA61ZGlUVJg" rel="nofollow noopener">YouTube</a> Join the Figurines Community on <a target="_blank" href="https://discord.com/invite/r2ujMfEb7S" rel="nofollow noopener">Discord</a> Happy Printing!-----------------------------------------------Printer settings on the Bambu Lab X1C<ul><li>Rafts: No</li><li>Supports: Yes</li><li>Resolution: 0.2mm</li><li>Infill: 10%</li><li>Filament brand: Polymaker</li><li>Filament color: brown, white, black, beige, pink, yellow, Red</li><li>Filament material: <a target="_blank" href="https://us.polymaker.com/products/polyterra-pla" rel="nofollow noopener">PolyTerra PLA</a></li></ul>

Pidgeotto Multicolor

寶可夢系列

Fletch

The Saturn V rocket miniature model developed by NASA to take astronauts to the moon. Some details were omitted due to how small they were or poor results after slicing. Available in both multicolor and single color. The rocket can stand vertically without any support once assembled.&nbsp;This model should fit all Bambu printers. You will need to move the model to the corner on the A1 mini to fit both the model and prime tower.&nbsp;Update 3/14/24 - <a target="_blank" href="https://makerworld.com/en/models/254506" rel="nofollow noopener">Added a stand to display the Saturn V rocket that can be found here</a>.&nbsp;NotesThe antenna is pretty small, be careful when removing from the kit. When pushing the antenna through the third stage, you can cut the tip off if needed. Do not cut the side that prevents the antenna from going through the third stage (the side that has an extra extrusion closest to the Saturn V label). Once the antenna is through the third stage, you can give it light tug to secure it in place.&nbsp;Assembly<img src="https://makerworld.bblmw.com/makerworld/draft/706290/2024-03-01_0c0b17411535b8.jpg">&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/706290/2024-03-01_88e6226af64dd8.jpg">&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/706290/2024-03-01_c99b1d1591bfb.jpg">&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/706290/2024-03-01_c63a7fd7539ff8.jpg">&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/706290/2024-03-01_725c5a900205e8.jpg">&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/706290/2024-03-01_a0f5646572fbd8.jpg">&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/706290/2024-03-01_38eaf64fc600e.jpg">&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/706290/2024-03-01_bf8c15a68b8df8.jpg">

NASA Saturn V Kit Card

卡式組合玩具

Llλmbda

Edit: added a second plate for Lid without supports as requested by user, added new plate for different orientation of spots, added new plate for one piece flower body if anyone wants to AMS multicolor it Yet ANOTHER Mario themed piggy bank model! This time we have a GIANT 2ft tall piranha plant floor bank! This model was originally meant to be a coin sorter as well but after many failed iterations I decided to just have it be a spiral ramp as all the designed I tried I could not acheive 100% success on the coin sorting. This piggy bank is LARGE and has many parts!  This is not meant to be a toy or moved around constantly and is meant more as a floor decor piece that you can throw loose change into as you walk in. Printing in orientation provided will be successful but will leave some slight blemishes on the underside of the rounded edges. Once everything is assembled these areas are hardly noticeable so its user choice of if you would rather have a slightly wonky bottom that can probably be nailed with great supports, or a seam where you glued the pieces together. Cut versions are provided on seperate plates All connectors have a tolerance of .2mm and should fit easily into the provided holes, glue both halves of the ramp together as well as the bottom piece. Glue your spots onto your flower body, then attach the plant lips to the flower body, mine fit so snugly in place I didn't even have to glue it. Slide your flower body over the top of the coin funnel and it should fit into place with some slight persuasion, once that is seated and glued you may then add the top of the coin funnel to the ramp. Glue your teeth in place and youre good to go!  If you're worried about stability you can glue the entire vine into the top of the lid to hold it in place. Happy Printing!

Mario Piranha Plant Large Spiral Piggy Bank

任天堂

Leo.w8

UPDATED and IMPROVED Version:→<a target="_blank" href="https://makerworld.com/de/u/1028186200/collections/58139" rel="nofollow noopener">SCREW IT</a> ←https://makerworld.com/de/u/1028186200/collections/58139↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑↑&nbsp;M3 Screw 02-07mm / Nut / Washer&nbsp;Really fine print for the perfect screw, can be changed for loss of perfection.&nbsp;For more Bolts, Nuts, Washers and other great models feel free to check out my profile! (or click the collections down below)&nbsp;<a target="_blank" href="https://makerworld.com/de/u/1028186200/collections/48523" rel="nofollow noopener">M2 Collection</a>&nbsp;<a target="_blank" href="https://makerworld.com/de/u/1028186200/collections/48524" rel="nofollow noopener">M2.5 Collection</a>&nbsp;<a target="_blank" href="https://makerworld.com/de/u/1028186200/collections/48526" rel="nofollow noopener">M3 Collection</a>&nbsp;<a target="_blank" href="https://makerworld.com/de/u/1028186200/collections/48528" rel="nofollow noopener">M4 Collection</a>&nbsp;<a target="_blank" href="https://makerworld.com/de/u/1028186200/collections/48530" rel="nofollow noopener">M5 Collection</a>&nbsp;<a target="_blank" href="https://makerworld.com/de/u/1028186200/collections/48533" rel="nofollow noopener">M6 Collection</a>&nbsp;&nbsp;

M3 Screw 02-07mm / Nut / Washer

工具打印件

Balzo98

Here for you my version of the train scene from Spirited Away, one of my favourite Ghibli film!<figure class="image image_resized" style="width:52.39%;"><img src="https://blautoothdmand.files.wordpress.com/2017/10/train_14.png?w=1200"></figure> In this model it might be a little tricky to remove the supports.Chihiro neck is very fragile so you have to be very gentle when you remove the support.The train also has some support that is not that easy to remove.I added some 1mm thick acrylic glass (from the cheapest ikea frame) for the window glass.&nbsp;Hope you enjoy!

Spirited Away Train Diorama

吉卜力

TripleGWorkshop

7 Unique buildings and many hidden surprises on a tiny footprint!<figure class="image image_resized" style="width:83.29%;"><img src="https://makerworld.bblmw.com/makerworld/draft/120145/2023-10-26_roml71ak77h2.jpg"></figure><figure class="image image_resized" style="width:83.83%;"><img src="https://makerworld.bblmw.com/makerworld/draft/120145/2023-10-26_yhertnekswpi.jpg"></figure><figure class="image image_resized" style="width:83.29%;"><img src="https://makerworld.bblmw.com/makerworld/draft/120145/2023-10-26_6hm6d3ggxuv7.jpg"></figure>

Teensy Town ☗ No Supports

建築

木MU

可拆卸的耗材料盘可以做一个不错的收纳。 这次我设计分成了七瓣，每瓣有三层，一共有21个小盒，非常合适用来存放螺丝或者大一点的电子元件。它不使用螺丝固定，安装简单。 希望你会喜欢这个设计。 注意它的高度，它可能不适合你的料盘的高度。它适合内层总高度约为62mm的耗材线轴，我使用的是必应的耗材料盘。

耗材料盘改零件收纳盒#7

收納

LabLab

Enjoy you Valentine's Day with this very cute T-Rex! It is printable in place, this mean you don't have to assemble anything. Just download the file and print!&nbsp;Perfect gift for any significant person in your life! It will remind everybody how much you love them.&nbsp;There are also an <a target="_blank" href="https://makerworld.com/en/models/247765#profileId-263987" rel="nofollow noopener">Easter Bunny version</a> and a <a target="_blank" href="https://makerworld.com/en/models/398197#profileId-299703" rel="nofollow noopener">Floreal Spring version</a> of this model! Please check them out!&nbsp;Check out my profile for more Valentine's work!&nbsp;Clean your buildplate properly before printing.&nbsp;For more models, please check out my <a target="_blank" href="https://makerworld.com/en/@LabLab" rel="nofollow noopener">profile</a>!

FlexiDino Print in Place T-Rex for Valentine's Day

玩偶

Goof3d

Chikipi from PalWorld. Easy to print. More PalWorld Models to come

Chikipi from PalWorld

palworld

Terminatordeux

The One RingFrom of the poster of the original movie remade in HUEFORGE;Added the one ring on it is mate black, red white and gold&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PETG JAYO Black Transmission Distance: 0.3 PLA Sunlu red Transmission Distance: 5 PLA Sunlu silk gold Transmission Distance: 5 PETG JAYO White Transmission Distance: 6!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!Swap Instructions: Start with Black At layer #6 (0.56mm) swap to red At layer #12 (1.04mm) swap to silk gold At layer #16 (1.36mm) swap to White At Layer #22 swap to psilk gold for the rest.&nbsp;The frame is in matte black

The One ring Lord of the rings Hueforge

3D立繪

Cubic Garden

A reworked combo including matching coasters is here!配上龍紋杯墊的新版本 : <a target="_blank" href="https://makerworld.com/en/models/130439" rel="nofollow noopener">https://makerworld.com/en/models/130439</a>&nbsp;新年龍紋全盒New Year Dragon Carve Snack Box&nbsp;In Chinese New Year, people always serve the guests different snacks - candies, nuts, dried seeds and fruits when they come for a visit in a ‘Box of Wholeness’ (全盒)&nbsp;Therefore I created this snack box with retro dragon carve style for CNY. It is gonna impress the guest!I have another version of the snack box in a non-Chinese New Year style, check it out andplease download from (<a target="_blank" href="https://makerworld.com/en/models/123057#profileId-132585" rel="nofollow noopener">https://makerworld.com/en/models/123057#profileId-132585</a>)&nbsp;It is scaled for X1C/P1/A1 bed size but you can as well resize it to match A1 Mini. But then you will have to adjust the layer height filament change accordingly.

Dragon Carve Snack Box

節慶

3d print studio

This is my completed project of a fully mechanical, 3D printed clock.I decided to do an EPQ project, and my aim/title of my project was to make a mechanical clock, which in the course of about 5 months, I went from an idea, to planning and researching, and then designing and printing, as well as prototyping a clock out.its definitely not the best, I unfortunately didn't do my gear ratios correctly when designing so some gears are out of time, and it only runs for about 5 mins before stopping because of friction (for me), but its a cool concept to show what can be built using a 3D printer, and to show different design techniques, as well as to incorporate unique ways that 3D prints can be used.EDIT: I'm sooo happy to see loads of people like my design, and even downloading and printing my clock out, id love to see what people have made, its just exiting that people are actually printing my clock out despite it having flaws.please have fun printing this out and assembling it, and also feel free to make any modifications to this, this is still a work in progress, and I would like to see what other people do to this.&nbsp;Notes:Definitely print the frame and palace out with either high infill or high wall count, id recommend 2 walls with 90% infill, so that extra material doesn't expand the print outwards by a bit.print mainspring out with 3 walls and any percentage of infill (I did 20%), and ill also recommend flipping mainspring around and print with supports, so it has a better finish.all other parts just print how you want it, I did 2 walls with 20% infill for rest of parts, just be careful that the parts are in the right orientation without any overhangs.if you can, put some kind of silicone grease on the axels, as well as where the pendulum contacts with the escape wheel.

Mechanical Clock

工程學

Bambu Lab

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000013716/design/2023-09-25_28088e30b1c02.jpg"></figure>This 3D-printed mouse has a futuristic hollow shell design, revealing its internal structure. This generative design shell structure is possible only with 3D printing. Our industrial designer fully utilized the advantages of a 3D printed structure to present you with this magnificently artful mouse.&nbsp;Recommended filaments: Bambu PLA series<a target="_blank" href="https://store.bambulab.com/collections/bambu-lab-3d-printer-filament?gf_60645=279355719795" rel="nofollow noopener">https://store.bambulab.com/collections/bambu-lab-3d-printer-filament</a>If using PLA matte, metal, silk, please slowly screw in the bolt and avoid over-tightening to prevent structural damage.Print Setting: Print without support, v2.0 print profile recommendedHardware Kit: Wireless Mouse Components Kit-002<a target="_blank" href="http://store.bambulab.com/products/wireless-mouse-components-kit-002" rel="nofollow noopener">http://store.bambulab.com/products/wireless-mouse-components-kit-002</a>&nbsp;Please make sure you clean the build plate before printing and/or applying glue to prevent print failures.&nbsp;Follow the Assembly Guide or video tutorial below step by step to print and assemble your build. Refer to the Design Guide for further design and quality enhancement.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000013716/design/2023-09-15_12b653452832c.png"></figure><figure class="media"><oembed url="https://www.youtube.com/watch?v=lkOg_X4qjW8"></oembed></figure>

Wireless Mouse 002

生活用品

mail.iou

update 04/05/2024If you want a printing method that is easy to maintain, you can consider my redesign:Reverse Blade Collapsing Katana - Rurouni Kenshin<a target="_blank" href="https://makerworld.com/en/models/414234" rel="nofollow noopener">https://makerworld.com/en/models/414234</a>&nbsp;update 01/12/2024 This knife is a one-piece printed design. If you are not sure whether the filament you bought can print this work well, you can refer to my new creation &#34;Nichirin Samurai Sword&#34;. This work uses a split printing design to facilitate future maintenance and blade replacement. Nichirin Samurai Sword : <a target="_blank" href="https://makerworld.com/en/models/135353" rel="nofollow noopener">https://makerworld.com/en/models/135353</a>&nbsp;Reverse Blade Sword miniThis is a smaller version of the Reverse Blade Sword, with a total length of about 80cm, suitable for A1 mini printers or people who don’t want to print too much. If you want to experience the full size, please go to <a target="_blank" href="https://makerworld.com/en/models/111322" rel="nofollow noopener">https://makerworld.com/en/models/111322</a>&nbsp;Notice It is recommended to use PLA+ and Textured PEI Plate for printing. If the viscosity of the plate of your 3D printer deteriorates, be sure to use glue to increase the grip to prevent the printed part from falling off halfway and wasting filament.After printing, please remove the support at the end of the knife.<figure class="table" style="width:77.33%;"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/816156/2023-12-29_51c8c09c32f62.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/816156/2023-12-29_60e68ce20b26b.png"></figure></td></tr></tbody></table></figure>Repair of fallen blades This work has been printed and verified on P1S, A1, and A1 mini printers and resized. It is currently tested using three materials: Bambu PLA, eSUN PLA+, and eSUN ePLA-Matte. The blade surface can be freely expanded and contracted without falling off. However, since PLA material is not resistant to high temperatures, if it is stretched and swung back and forth many times quickly, it will cause the blade to be heated and expand, causing the blade to be thrown out. At this time, you can repair it with a simple method. Please use a tape with high viscosity that is not easy to fall off, such as Acetate Cloth Tape. Stick it on the entrance where the blade falls off. The amount of tape can be adjusted to increase or decrease the size of the enlarged hole. Then push the blade down and plug it back into the entrance to repair it.<figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/816156/2023-12-30_59e2edca56a86.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/816156/2023-12-30_9ae8cbf98f5af.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/816156/2023-12-30_75ce6d29cda6e.png"></figure></td></tr></tbody></table></figure>&nbsp;&nbsp;

Reverse Blade Sword mini ( Samurai Sword)

玩具

Wcad00

Update december 1st<ul><li>the chair is modified with a larger magnet hole </li><li>the missiles from the underside launcher are a little smaller</li><li>the back gun now has an aligment to make it easier to fit</li><li>updated the assembly pdf with the underside launcher and cockpit assembly</li></ul>&nbsp;&nbsp;This is my take on a batwing. its 100% my design and a real labor of love for me. assembly is pretty strait forward.the model is almost 80 cm across so be mindful of that. also attached an assembly guide, not the best, but like i said, it shoud be pretty straight forward..all pieces printed perfectly and require no sanding.Hope you enjoy this model and whom ever decides to take on this print please feel free to contact me for anything.its all printed in BL matt charcoal PLA, and i have to say it turned out gorgeousAlso it is split so that all plates print in 1-2 hours, so it minimises the printers usage; there are two exceptions on the large parts of the wings but that is it.&nbsp;Also photos are available athttps://s.go.ro/vs3zltii | password: 230926there are over 60 so i couldnt upload them here.Next few days i will upload better quality photos of the entire plane&nbsp;I also have a project for a batman beyond style vehicle, it will be proportional to this one. so stay tuned if you like my overall aesthetic .

Batwing

飛機

TrendtB

🎉 Party in 2024 with style! These aren't just any party glasses; they are a statement! For those who love to stand out, these spectacles are designed for you to mix and match colors for unique vibrant looks. Download the files now to start personalizing your own glasses, or design something for the theme of your party, and give your guests something memorable to take home! 🌈&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/265824/2023-12-06_4aa29e0cd22b2.gif"><figcaption>2024 Dazzling Party Glasses with articulating temples</figcaption></figure>&nbsp;Ideal for: New Year's Eve bashes, 2024-themed parties, photobooths, or any 2024 occasion where you want to shine! 🎆&nbsp;<h3>KEY FEATURES</h3><ul><li>Eye-Catching Gradient Effect: Leverage filament properties to create a dazzling gradient between colors,</li><li>Functional Snap-Fit Hinge: Easy to fold and unfold for convenience.</li><li>Comfortable and Wearable: Designed for prolonged use without discomfort.</li><li>Visibility Maintained: Enjoy the party fully, you can still see with these on!</li><li>Customizable Colors: Change 'Gradient-top' and 'Gradient-bottom' colors for unique effects (more detail below)</li><li>Low wastage: Reduced filament wastage by separating models and aligning color changes to layer-height</li></ul>&nbsp;<h3>✨DAZZLING GRADIENT✨</h3>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/265824/2023-12-06_b97bddd5fb28b.gif"><figcaption>Observe the color shift from red to yellow, without a gradient filament!</figcaption></figure>&nbsp;This design uses the semi-transparent properties of filament to create a dazzling gradient effect along the shutter lines. This was done by adjusting the model thickness in specific areas. You can experiment with filaments and create different effects by changing the filament assigned to parts of the model:&nbsp;<figure class="image image_resized" style="width:55.35%;"><img src="https://makerworld.bblmw.com/makerworld/draft/265824/2023-12-06_4324208dfc905.png"><figcaption>Adjust per-model materials by (1) clicking on Objects, then (2) selecting the relevant model and changing the assigned material.</figcaption></figure><ul><li>Gradient-Bottom is the bottom layer of the shutters, and most prominent for the lower 3 bands</li><li>Gradient-Top is on top of Gradient-Bottom, and progressively gets thicker (creating the gradient)</li><li>You can quickly assign materials by hitting the corresponding number on your keyboard (e.g. 1 = slot 1, 2 = slot 2, etc.)</li></ul><h4>Color combination ideas:</h4><figure class="image image_resized" style="width:78.81%;"><img src="https://makerworld.bblmw.com/makerworld/draft/265824/2023-12-06_20be23341c5f3.jpg"><figcaption>Example gradients: Snowy day, Sunset, and Tropical</figcaption></figure>&nbsp;<ul><li>Sunset - Red (Gradient-Bottom) to Yellow (Gradient-Top)</li><li>Snowy day - White (Gradient-Bottom) to Light Blue (Gradient-Top)</li><li>Tropical - Green (Gradient-Bottom) to Yellow (Gradient-Top)</li><li>Glowing - Any (Gradient-Bottom) to Glow (Gradient-Top)</li><li>Noir - Black (Gradient-Bottom) to White (Gradient-Top)</li></ul>You can also experiment with different properties; like metallic or sparkle fading to matte or transparent!&nbsp;<h3>ASSEMBLY</h3>Assembly is straight-forward. Each pair of glasses needs a complete frame, and one of each of the temples (left and right).Once printed, each temple will snap fit into the frame as shown below. This can be quite stiff and requires some strength to fit; but once fitted, you will have a strong and freely moving hinge for your glasses!&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/265824/2023-12-06_6e5d045500038.gif"><figcaption>Snap-fit assembly demonstration. NOTE: Requires some force to assemble.</figcaption></figure>&nbsp;<h3>PRINT SETTINGS</h3>Use the original Designer profile to ensure success. If you're setting up your own profile for yourself, or to share - here are a few notes.<ul><li>Print Settings: 0.2mm layer height, 2 walls; no supports needed.</li><li>Material Advice: PLA works well, or switched PETG for enhanced durability, especially for hinges. DO NOT mix PETG and PLA for color layers, as you will encounter material adhesion issues. Stick to one type of filament.</li><li>Printing Tip: Ensure your filament is flow calibrated for optimal snap-fit hinge functionality.</li></ul>&nbsp;<h3>LOVE THIS DESIGN?</h3>You might also like my others:&nbsp;<figure class="image image_resized" style="width:56.67%;"><img src="https://makerworld.bblmw.com/makerworld/draft/265824/2023-12-11_f750488b35d1f.jpg"><figcaption>2024 Cuban Chain https://makerworld.com/en/models/89590#profileId-95895</figcaption></figure><figure class="image image_resized" style="width:57.4%;"><img src="https://makerworld.bblmw.com/makerworld/draft/265824/2023-11-24_760cf0b6bcdd1.jpg"><figcaption>If you like this design, you might also like my “Good Vibes Only” standing ornament available here: <a target="_blank" href="https://makerworld.com/en/models/72700#profileId-77228" rel="nofollow noopener">https://makerworld.com/en/models/72700#profileId-77228</a></figcaption></figure>&nbsp;<figure class="image image_resized" style="width:57.07%;"><img src="https://makerworld.bblmw.com/makerworld/draft/265824/2023-11-28_0945c860882f5.jpg"><figcaption>If you have spare Bambu Lab spools laying around and need a good labelling system, check out my Spool Label design available here: <a target="_blank" href="https://makerworld.com/en/models/76526#profileId-81100" rel="nofollow noopener">https://makerworld.com/en/models/76526#profileId-81100</a></figcaption></figure>&nbsp;&nbsp;

2024 Dazzling Party Glasses - Customizable multicolor

身體配件

Jal Shah

To continue on the previously designed tetrahedron lamp, I designed dodecahedron lamp. I also found tetrahedron lamp to be a bit on a smaller side, so this time I wanted something larger. This lamp is 360mm (≈ 14 inches) tall and 320mm (≈ 12.6 inches) wide and deep.You can use LEDs with this lamp and there is a special frame designed for LED wiring. You can also use E26 \ E27 standard pendant light with this lamp and there is a special insert for that. You also get a stand if you decide to put the lamp on some surface or you can hang the lamp with pendant light.You will also find two types of films this time. One is simple and plane, but the other has numbering on it to make the D12 dice lamp for your gaming room.<h3>Printing</h3>Depending on the version you choose to print, you can refer to the guide below for the number of pieces that need to be printed.<h5>LED Version</h5><ul><li>11 Frame Pieces</li><li>1 Frame with Hole for LED Strip Wire</li><li>12 Insert Pattern Pieces</li><li>12 Insert Films (Pattern 1 or Pattern 2)</li><li>30 Alignment Keys</li></ul><h5>Pendant Light Version</h5><ul><li>12 Frame Pieces</li><li>11 Insert Pattern Pieces</li><li>1 Insert Pattern - For E26_E27 Pendant Lamp</li><li>11 Insert Films (Pattern 1 or Pattern 2)</li><li>1 Insert Film - For E26_E27 Pendant Lamp (Pattern 1 or Pattern 2)</li><li>30 Alignment Keys</li></ul><h5>Stand</h5><ul><li>1 Stand Top</li><li>1 Legs Connector</li><li>5 Legs</li></ul><h3>Assembly</h3><ul><li>Glue \ Press fit inserts into frames.</li><li>I used Vellum paper as the inside backing to diffuse the light. You can print and use either of the inserts for light diffusion as well.</li><li>Stick printed inserts or vellum paper to the inside of the frames.</li><li>Glue all frames together using alignment keys and keeping the bottom side open.</li><li>Finish led work or pendant lamp before inserting the bottom insert. I used pendant light wiring kit myself.</li><li>Lastly attach the bottom panel. I used tacky craft glue to attach the bottom panel to be able to take it off if I need to change the bulb.</li></ul>

Dodecahedron Lamp

燈飾

Factorian Designs

Looking for a chic and modern vase design? Check out my 3D printable vase! With a sleek and minimalistic aesthetic, this vase is perfect for adding a touch of elegance to your living space. 3D printed this vase is both durable and visually appealing. Its unique design allows it to blend seamlessly into any interior style, from contemporary to traditional.&nbsp;Customize your vase size, its is easy to print and can be tailored to your exact dimensions. Whether you&#39;re looking to display fresh flowers or simply add a stylish accent to your decor with dried flowers, this vase is sure to impress.&nbsp;Download yours today and start creating your own beautiful and functional vases!&nbsp;&nbsp;🔹 DETAILS 🔹- quick and easy print, print instructions in download included! - perfect to print in vasemode! (spiralize outer contur/ Spiral vase mode in some slicers) - no supports, brim or raft needed! - vase in pictures are 180mm and 230mm tall - a little gravel, sand or stones should be added on the inside to keep your vase from falling over - the vase with a different shape can also be downloaded, see my profile&nbsp;➜ Premium designs and other platforms:<a target="_blank" href="https://factoriandesigns.com/" rel="nofollow noopener">Premium Designs</a>&nbsp;A heartfelt thank you to everyone who supports my work!&nbsp;----&nbsp;❗ For Private Use Only! Commercial License?If you&#39;re looking to sell my printed models commercially, **subscribe to my patreon** and gain access and selling permissions for all my designs. Additional benefits include e-commerce support, slicing guides and product picture usage! <a target="_blank" href="https://www.patreon.com/FactorianDesigns" rel="nofollow noopener">Patreon Commercial License</a>&nbsp;----&nbsp;🎨 MORE  DESIGNS  You like the art style? Then take a look at my other creations!: <a target="_blank" href="https://makerworld.com/en/u/845620596" rel="nofollow noopener">Maker World Designs</a>&nbsp;or find me at: <a target="_blank" href="https://factoriandesigns.com/" rel="nofollow noopener">Factorian Designs</a>&nbsp;---&nbsp;✔️ Want my favorite 3D-printing equipment &amp; filament ? Get it here!<a target="_blank" href="https://factoriandesigns.com/products" rel="nofollow noopener">Recommended Equipment &amp; Filament</a>

MODERN VASE "MEEK": Add Style to Your Home Decor!

擺飾

LwFactory

SUNLU Filament spool adapter suitable for A1 AMS liteSuggest using PETG filament for printing

樂器