KanaanCross

3dawesomeness

Another Reptile feeding dish I designed feel free to redesign or sell as much as you want. You may have to scale up or down according to your needs. Good Luck and happy printing.

Reptile Feeding Dish

pets

Settlers

This lampshade is designed for the <a target="_blank" href="https://makerworld.com/sv/models/13717#profileId-13429" rel="nofollow noopener">Bambu Led Lamp 001</a> kitUse the lamp base from the original model together with this lampshade.&nbsp;Try out various colors and textures of filament for your own special touch 💡☺️👌And feel free to share photos of your results!&nbsp;Find more lampshades to the Led Lamp Kit in <a target="_blank" href="https://makerworld.com/en/u/4081361372/collections/36888" rel="nofollow noopener">this collection</a>

Sapphire - Lampshade for LED Lamp 001

arts and crafts 

3D Print Masters Hub

Drawer Set - 6 or 12 BIN-You choose, 6 or join together for 12 bin-Divider inserts for custom bin size.-Great for organizing misc hardware parts, batteries, screws, clips and more!-Easy print-Scale down as needed.-Please like and subscribe! More to come!-See bio for more exclusive print project ideas.🔥🔥 Check out my PRO MODELS HERE! <a target="_blank" href="https://cults3d.com/en/users/FabulousFilaments/3d-models" rel="nofollow noopener">https://cults3d.com/en/users/FabulousFilaments/3d-models</a> 🔥🔥

Drawer Set - 6 or 12 BIN

corner store

Pulsar Designs

Important: new and improved Seed Planter Tool V2 now available on my profile! Improved strength, design, and comfort!<a target="_blank" href="https://makerworld.com/en/models/443836#profileId-350000" rel="nofollow noopener">https://makerworld.com/en/models/443836#profileId-350000</a>&nbsp;This seed planter tool makes planting seeds a breeze! Put away your pencil and make perfect holes every time. This tool features lines every 10mm, for up to 50mm depth measurement. This is handy for seeds with certain depth recommendations. Remember: an inch is about 2.5cm, so each line represents 0.4 inches.&nbsp;&nbsp;

Seed Planter Tool

gardening 

Antee

The first thing you will need to do is modify the base gun to accept the body kit. The front sight needs to removed by unscrewing it. The rear sight and bolt need to be trimmed down to clear the slide cover. Cut off the top section of the rear sights that holds the two small fiber optics and trim down the two pull tabs on the sides of the bolt. See the picture for reference. The magazine can be extended using a MITA glock extension. This is not necessary but it will make changing mags easier once the kit is installed.Using an M5 screw attach the Slide to the bolt of the gun. Make sure that the screw you use is not so long that it protrudes through to the inside of the bolt and hits the fire selector lever, you may need to trim the screw down if it’s too long.&nbsp;Take the Muzzle and slide it over the front of the gun and secure it in place with an M3 screw on the top. The hole on top should line up with the hole that is already present on top of the gun used to mount a picatinny rail. Next mount the Insert to the front of the Muzzle on top with another M3 screw, the side of the Insert with the circular protrusion will face forward (toward what you’re shooting).Add the Flashlight Mount to the under side of the gun in front of the trigger, there are four screw holes that you can run screws up from the bottom into the Muzzle. As you tighten these four screws the Muzzle and Flashlight Mount will clamp down on the barrel of the gun.Attach the Arc to the bottom of the gun. The front will attach to the bottom of the Flashlight Mount and the rear will attach the base of the pistol grip in the rear. The factory provided hole in the base of the pistol grip will allow you to screw the Arc and grip together with a countersunk M3 screw. The front of the Arc can be screwed to the Flashlight mount with a single long M3 screw and nut or with two shorter M3 screws (one from each side).&nbsp;There are two holes along the center of the Flashlight mount that will let you screw on a 5 slot picatinny rail and attach a flashlight.Back on top of the gun you can set the Top onto the gun and secure it with 8 countersunk M3 screws. There is a small pocket built into the underside of this part in the rear that will fit over the screw on top of the gun that is securing the Muzzle.Paint up the gun however you like!&nbsp;Parts Required: AAP-01 pistol MITA Glock magazine extension 5 slot picatinny rail Picatinny pistol flashlight of your choiceOther parts: Misc M5 and M3 screws

DESTINY 2 FORERUNNER AIRSOFT PISTOL

cosplay

sassiecat3d

This is a baby dragon that has been petrified in its egg before hatching.  I have made it into a dicetower with tray, so you both have a place to display your dice and use as a dicetower, while playing dnd.  I have played dnd since i was a kid, and currently I also play in a 5e campain. I love to collect dice, and in my book you can never have to many dicetowers or dice!  I wanted to make a unique dragon inspired dicetower, and I love the idea of dragons and eggs, so I combined the 2, and its perfect for the theme of the chineese new year, the year of the dragon!  Let the games begin and the dice roll… ***** Important when downloading these files:This is my design and copyright to me sassiecat3d, it's not to be used commercially or resold without my permission, the stl file is under the same clause, not to be re-sold or use commercially without my permission. You are welcome to contact me if you would like to know more. :-) You agree to these terms when you download this file.  For the commercial version you can go to my patreon:<a target="_blank" href="https://www.patreon.com/Sassiecat3d" rel="nofollow noopener">https://www.patreon.com/Sassiecat3d</a>

Baby dragon petrified in egg Dicetower

MinionMancer

This from my model: <a target="_blank" href="https://makerworld.com/en/models/50630#profileId-52349" rel="nofollow noopener">https://makerworld.com/en/models/50630#profileId-52349</a> Tired to get your fingers dirty while eating at your desk? Here's the solution for you so you can enjoy your Cheetos in peace while working at your computer. Food safe filament recommended&nbsp;I remixed this model to have 3 differents size, and I marked them as well:<ul><li>M is for medium and recommanded for men with large hand.</li><li>S is for Small and it is recommanded for smaller and or thin fingers like most women.</li><li>XS is for XSmall and it is recommended for small women hand ;).</li></ul>I prefer to print those in PETG as it is a food safe filament as well but that way they are stronger also.I use 75% infill because I want them sturdy and so they can resist being wash as well.Don't put them in your Dishwasher! Always clean them by hand!&nbsp;Happy printing and happy snack at the office!

Gaming Chopsticks for Finger to use at your PC in 3 sizes

kitchen

InFlames3D

Game of Thrones bookmark - а great accessory for any book lover and Game of Thrones fan!

Game of Thrones - Bookmark

office

Nils Kal

<img src="https://makerworld.bblmw.com/makerworld/draft/377933/2023-08-24_tgj679uvkpm2.png" alt="NK"><img src="https://makerworld.bblmw.com/makerworld/draft/377933/2023-08-24_nszsm3suqax8.jpg" alt="banner"> Want to save money for the new awesome RTX3080? Here is the perfect piggy bank to keep you motivated!&nbsp;The card is scaled down a bit to fit on the MK3 printbed, if you want the original size, you can scale this back up to 142% in your slicer to get the orignal size.I've also provided a version without the money slot so you can also print this as a replica (maybe to fool someone).The design won't require any supports and is pretty straight forward to print and assemble. You also won't need any extra hardware. The color changes are layer based so no AMS required. The "PCI-E" part has a built-in support that needs to be removed after the print.Fun fact: If you print on 100% scale and only put in 2€ coins, you can fit in 851€. Installation guide: The installation is pretty straight forward, basically just look at the schematics below.<ul><li>Remove the supports from the PCI-E part (I've also provided an STL without the custom supports)</li><li>Basically click in all pieces (may use a bit of glue)</li><li>Be careful not to break the lamellas</li></ul><a target="_blank" href="https://ibb.co/8K6VhRj" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/377933/2023-08-24_oy27474lmzfs.jpg" alt="Qries"></a>[ click to enlarge ]<h3> </h3>&nbsp; As always, this design is subject to change so check back again for updates.Have fun with the piggy bank! &nbsp;If you like this file or need some adjustments feel free to leave a comment. A rating or tip is also welcome and may check out my other designs! Happy printing!&nbsp; <img src="https://makerworld.bblmw.com/makerworld/draft/377933/2023-08-24_keu5q53lfszg.png" alt="NK"><h3>Print instructions</h3><ul><li>Use .3mf or .gcode for presliced settings</li><li>Print in any material</li></ul>&nbsp;&nbsp;This work is licensed under the 'Creative Commons NonCommercial' license. Please do not sell any physical or digital copies of it.

RTX3080 Piggy Bank

gaming

JS DESIGN

HERE IS THE LAST BUT NOT THE LEAST OF MY EGG FAMILLY!&nbsp;Introducing my SMALL Crackable / Breakable Surprise Egg.&nbsp;The print will pause automatically at around layer 220 and will wait for your command to resume. This will allow you to add any surprise you want in the egg. The printer will stay in “standby mode” with heated bed and standby nozzle temperature so no rush to resume the print. It can stay like this for hours.&nbsp;The design makes the egg easily breakable in small pieces.&nbsp;Here are the other members of this familly 👇&nbsp;<a target="_blank" href="https://makerworld.com/en/models/238650#profileId-254513" rel="nofollow noopener">Breakable / crackable surprise eggs - Easter by JS DESIGN - MakerWorld</a><a target="_blank" href="https://makerworld.com/en/models/383498#profileId-283634" rel="nofollow noopener">Large Crackable / Breakable Surprise Easter Egg by JS DESIGN - MakerWorld</a>&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/766936/2024-03-22_a02affe5d0886.png">&nbsp;

Small Crackable / breakable surprise easter egg

holidays 

Cjwelcome

This mechanical Pill organizer box can help store even some of your larger pills for a convenient and labeled AM-PM cycle. This design uses absolutely no supports whatsoever in order to provide you the most user friendly experience in printing with ease. Simply print the components and throw them together for a super cool lever action dispenser with a satisfying click to its internal ratcheting mechanism! No need to remove components or disassemble this box for refills, simply open the lid and replenish your next weeks dosages. Stands upright for easy storage in your cupboard or bathroom medicine cabinet. Continue reading below for any updates and Enjoy!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000172691/design/2024-02-05_32261aba83369.gif"></figure>EDIT 1: Added a pill fit tester so you can see if your amount of pills fit in the very quick spiral vase print then that is how much volume each section has available. Many people cant quite guage how much room each section has so this seems like it will help everyone out if they arent sure and dont want to waste time printing the whole thing. Happy Printing!&nbsp;EDIT 2:•Added V2 box which fixes empty spaces inside the box which could potentially jam smaller pills inside when using.•Added multiple language labeled drums! English, Spanish, Polish, German, French  and now Romanian! If there&#39;s a language you&#39;d love to see included then drop me a DM!&nbsp;EDIT 3:•Some people seem to have some fitment issues with the inner rotating drum. For this I&#39;m sorry and looking at my model that specific part has ~0.15mm Radial tolerance (Tol.= 114.3mm - 114mm / 2 = 0.15mm Radial Tol.) which for some printers can become too tight. For this I recommend printing everything else the same but for the center drum, print it at 99.5% scale should put the drum around 113.5mm, adding another 0.25mm radial tolerance if your printer seems to print too tight which should solve that issue of fitment.•Second is more of a simple sizing request for some. For everyone who loves the design but thinks its a little on the small side for the amount or size of pills they need to take, I have found a solution in the very easy form of scaling the model! For every component except the center drum, you will want to scale up from 100% to 120%. The main case will need to be rotated 45° then upscaled and all others small components can just be upscaled to 120% as they currently sit. The center drum in order to keep it from being too tight, scale it up only to 119.75%. That should be able to then hold up to six (27mm L x 10mmØ pills) in every section and still be under 6&#34; tall. If you upscale it to 120% and the mechanism doesnt seem to be clicking the drum into place that is because the tolerance of the ratchet wheel under the drum will now have a little slack in it. To solve this, place a small piece of electrical tape or scotch tape on one or two faces of the sqaure peg on the base until the ratchet sprocket has no wiggle room shown below.<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000172691/design/2024-02-07_e78b9474b42e.jpg">&nbsp;EDIT 4: Some people gave feedback that their prints were too tight of tolerance and the center drum would not be able to spin or the main hinge was binded and would snap at the base when trying to break it free. Another issue of individuals that need to take smaller pills or chalk like pills would have them break and or become caught in the lever arm above the opening section. To solve these issues I have opened up the tolerance for both the drum section and beefed up the hinge of the main box as well as added a fin section that covers the lever arm allowing the pill section to be fully covered allowing no space for pills to get caught between. The only difference is with the assembly which will require a small drop of superglue at the three pin locations for the two alignment slots and the central lever pin cavities. Because few of these instances have occured, the V2 will remain available for people to download and print but if you are interested in a bulkier hinge, looser toleranced and no risk at all of pills getting caught at the open ended section then V3 is for you. Im always open to feedback and Italian labeled drum is soon to come for this edit #4!&nbsp;&nbsp;ASSEMBLY INSTRUCTIONS: Be sure your parts are free and clear of wispy strings and your machine/filament is properly calibrated for accurate printing. These models are meant to assembly together with relative ease and tolerances but improper printing/old filament can cause tolerances to seem tight. Make sure the notch mark on the Drum-Lock ring is facing the front pill opening of the box or else the ratcheting mechanism will not line up properly.<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000172691/design/2024-02-05_43efbd423805d.gif"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000172691/design/2024-02-05_9a1e8430cd059.jpg">(V2 Assembly):May or may not have some tight fit issues on case by case basis and potential for pill to get grabbed by the lever arm.<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000172691/design/2024-02-05_63d37f8c0c547.gif">(V3 Assembly)<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000172691/design/2024-02-11_042dd9cb10122.gif"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000172691/design/2024-02-11_91df90be1061.png">&nbsp;!CAUTION!…Be sure to keep away from children as we all must remember that these are still for pill/medication storage and must be treated as such regardless of how cool 3D printing their storage is. Be safe and happy printing!&nbsp;

Mechanical Weekly Pill Organizer(NEW MULTILINGUAL)

sell items

Meister Edel

Update 10.02.2023:I remixed the rotor with the toroidal design :) Feel free to test ist out!<a target="_blank" href="https://makerworld.com/de/models/54749#profileId-56494" rel="nofollow noopener">https://makerworld.com/de/models/54749#profileId-56494</a>In addition, there are now many other great remixed propellers from other users. You can find them connected to this print or my toroidal propeller.<figure class="image image_resized image-style-align-center" style="width:65.71%;"><img src="https://makerworld.bblmw.com/makerworld/draft/353748/2023-11-10_2d7kbimuo75c.jpg"></figure>&nbsp;HiRecently my son came home very sad because a friend had such a fancy flying propeller from the 1€ shop.Of course I had to sit down directly at the computer and after the first prototype was already well working I designed an improved version.This toy should be very stable and last a long time! Also, it's very easy to use and grab for the smaller ones among us!Put the pulling rod in the place marked by the arrows. Otherwise the propeller wants to fly downwards. Have fun! :) Note: The prop will fly long distances/ very high. So better use it in a place without trees and no obstacles. Hold the Toy away from the face! - otherwise the propeller will fly into it :D&nbsp;Print instructions/ tipps:<ul><li>Axis: Print the axis with at least 3-4 perimeters!</li><li>Propeller: Print the propeller with a not too brittle material! (I used tough PLA or even better: Nylon + Carbon Filament) - Low infill: The lighter the better ,-) I also tried TPU. It works but if you pull too hard it may deform too much and cause a malfunction. The lower you choose the layer hight the less friction the prop will cause. (I printed in 0,15mm)</li><li>Gear & Bearings: Use filament that can withstand kinda low tolerances. PLA will do the job. If you have a seam cut it off after printing. To avoid a bad surface dont "fill the gaps".</li><li>Pulling rod: Print the Classic+ Rod with 3 Perimeter.</li><li>It is possible to separate the file into parts with your slicer ,)</li><li>I also like to break the corners of all parts by scraping over these areas with a knife. That makes the action smooth and gives a good handfeel :)</li><li>Power of Scaling: If you have difficulties inserting the axis you may reprint it scaled down a little. If it is too loose scale it up a little so it fits tight enough.</li><li>It is not necessary but I lubricated all mechanical pieces with some paraffin wax. A drop of Oil will do the job too but may be messy.</li><li>You can print all parts without support and put the parts together very easy.</li></ul>Attention: Don't use damaged Propeller!! A disbalance in the Rotation might destroy the Propeller and parts could fly Off. Especially with brital Material Like PLA.  New Mechanics Update: This is the right way to assemble the toy!<figure class="media"><div data-oembed-url="https://youtu.be/0pYzTrsRqqw"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/0pYzTrsRqqw" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>Since the design optimazion of the internal mechanics there is no glue needed at all!  &nbsp;I have also provided other beautiful designs for kids for free. For example, my latest is the ocarina to make music!<a target="_blank" href="https://makerworld.com/de/models/54693#profileId-58010" rel="nofollow noopener">https://makerworld.com/de/models/54693#profileId-58010</a>&nbsp;<figure class="image image_resized image-style-align-center" style="width:74.14%;"><img src="https://makerworld.bblmw.com/makerworld/draft/353748/2023-11-10_2xl9blerr9l5.jpg"></figure>&nbsp;<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=WfEfctJU70o"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/WfEfctJU70o" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;&nbsp;To get the most strength out of the pulling rods locate the seam to this location: (It is possible with the Prusa Slicer for example)<figure class="image image_resized" style="width:61.62%;"><img src="https://makerworld.bblmw.com/makerworld/draft/353748/2023-11-10_yj4redoaa581.png"></figure>&nbsp;Remix CultureI think this simple design is very open for you to bring in your designs too! So be invited to create even better propellers! (I uploaded the .step file of the core piece. [mm])&nbsp;<figure class="image image_resized image-style-align-center" style="width:66.54%;"><img src="https://makerworld.bblmw.com/makerworld/draft/353748/2023-11-10_sxifu6dn5if0.jpg"></figure>&nbsp;&nbsp;&nbsp;Update 06.07.2022Added a new (hopefully) more aerodynamik prop. This one flies even higher!(Added in standard download & single)Update 28.05.2023Increased the strength of the prop a little by adding a radius connecting the wings with the outer ring.Update 23.02.2023: NEW PULLING RODS! Some had proplems with a breaking pulling Rod. So I beefed up the old one (Classic+) and also designed 2 totaly new ones (Ergonomic & Hook). For the Ergonomic one you will need a M3 x 20+ Screw for assembling. I tested all with PLA in the local kindergarten and they withstand even rough abuse :PUpdate 27.09.2023: Due to different manufacturing tolerances the press fit does not always work directly (scaling the axle can work wonders) I have slightly reworked the inner mechanics. I'm happy about any short feedback on the new design!&nbsp;&nbsp;If you like my work I would be very happy if you share it with others and leave a like :)

Strong Flying Propeller / Pull Copter (No Supports)

kids

背着画板打僵尸

Link to the other one：<a target="_blank" href="https://makerworld.com/zh/models/383709#profileId-283834" rel="nofollow noopener">https://makerworld.com/zh/models/383709#profileId-283834</a>Or click on my profile picture to find it on my homepage.

石狮子/FOO DOG(左/LEFT)

printer tools

Tyler Treece

The "Moms Demand Full Auto" 3D-Printable Swift LinkAuthor FreeMenDontAskVersion1.0&nbsp;This is the "Moms Demand Full Auto" 3D-Printable Swift Link - an educational model for understanding how swift links work - in particular, how a 3D printed swift link would work.&nbsp;Works with; * Standard AR FCG* Most AR lowers* Full Auto BCG (most AR15s have this, PSA, Daniel Defense, BCM, BCA). Some commerial (Ruger, Colt) do not have the needed carrier. Printing * Print at 99% infill with support. This works in PLA, but would work better in a more wear resistant poylmer like nylon. File is oriented correctly for print orientation.&nbsp;For educational/SOT use only. Don't be an idiot. Video demonstration + explaination of function: https://gunstreamer.com/watch/ar15-3d-printed-autosear-demo-and-explanation_a56niXTsBicHsyW.html

Boom stick tool

workshop

DKprints

A spinning bathroom sink organizer! The two ends of the organizer rotate in order to privide better access to whatever you choose to store! Prints on one plate and requires a push fit assembly of the four small legs into the holes in the bottom of the organizer. Happy Printing!

Spinning Bathroom Organizer 

household 

designs.by.Marcum

The only place you need to go for all of your gorgeous dog kit cards!&nbsp;With these models I set out to do something that was both simple to print and assemble, but also instantly recognizable as your favorite furry friend. This simplicity makes them easy for even the youngest children to slide together, while also keeping a sophisticated look for display on your office / home desk.&nbsp;Current breeds include:<ul><li>Australian Cattle Dog</li><li>Australian Shepherd (P)</li><li>Basset Hound</li><li>Beagle</li><li>Border Collie</li><li>Boston Terrier</li><li>Boxer (P)</li><li>Bull Terrier</li><li>Chihuahua</li><li>Cocker Spaniel</li><li>Corgi</li><li>Dachshund</li><li>Doberman Pincsher</li><li>French Bulldog</li><li>German Shepherd</li><li>Golden Retriever</li><li>Great Done (P)</li><li>Husky</li><li>Labrador Retriever</li><li>Newfoundland</li><li>Nova Scotia Duck Tolling Retriever</li><li>Pomeranian</li><li>Poodle</li><li>Rottweiler</li><li>Saint Bernard</li><li>Saluki</li><li>Scottish Deerhound</li><li>Scottish Terrier</li><li>Shetland Sheepdog</li><li>Shiba Inu</li><li>Shih Tzu</li><li>Vizsla</li><li>Yorkshire Terrier (P)</li></ul>Breeds above marked with “(P)” are located exclusively on Patreon, link below.&nbsp;The kit card connectors were designed to easily snap away, but for the cleanest finish it is recommended to use snips to remove them. Each dog may have a slightly different assembly due to shape and size, but the fundamentals will remain the same amongst all of them.<ol><li>Snap all connectors to free each piece</li><li>Slide the ears into the slot at the top of the head</li><li>Slide the larger connector into the cutout at the front of the body</li><li>Slide the smaller connector into the cutout at the back of the body</li><li>Align to the two cutouts on the legs with the connectors and slide in</li><li>Repeat for the last leg</li><li>Enjoy!</li></ol>If you&#39;d like access to a Commercial License and exclusive designs not seen anywhere else, such as Cat Breeds:<a target="_blank" href="https://patreon.com/designsbyMarcum" rel="nofollow noopener">Join me on Patreon</a>&nbsp;Check out my latest public release in this series<a target="_blank" href="https://makerworld.com/en/models/447508#profileId-354203" rel="nofollow noopener"> Wildlife Kit Card - Multiple Species</a><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000199263/design/2024-05-02_03abe4aac8db1.jpg">&nbsp;Filament used in product photography:<ul><li>Overture Matte PLA - White</li><li>Overture Matte PLA - Light Gray</li><li>Overture Rock PLA - Rock White</li><li>Overture Matte PLA - Chocolate</li><li>Overture Matte PLA - Black</li><li>Inland PLA - Marble White</li><li>Inland PLA+ - Bone White</li><li>Inland Matte PLA - Brown</li></ul>

Dog Kit Card - Multiple Breeds

toys

Saber3D

Check all my models out at <a target="_blank" href="https://saber-3d.com/" rel="nofollow noopener">www.Saber-3D.com</a> &nbsp;New dragons, creatures, and more released every month to my patrons, thank you for supporting my work! &nbsp;Follow our socials to see new models! <a target="_blank" href="https://www.instagram.com/saber.3d" rel="nofollow noopener">Instagram</a><a target="_blank" href="https://www.tiktok.com/@saber3d" rel="nofollow noopener">TikTok</a>&nbsp;This flexi dragon was designed to take less time but still give you the awesome look of a large dragon as well as make custom designs as easy as possible! Every part of this dragon can be easily painted in your slicer of choice, just make sure edge detection is turned off 😉&nbsp;Want to sell prints or just enjoy the instant access to all my models? join our All Access tier on <a target="_blank" href="https://www.patreon.com/Saber3D" rel="nofollow noopener">Patreon</a>. &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;

Articulated Crystal Dragon by Saber3D

dragons and anime

PerfectPrince

I saw a video-game knife trending on the downloads page and thought, what about a “real” knife? All research pointed to this KA-Bar 1220 Knife as a popular go-to knife. I downloaded @URPO's Solid 3D Model (not printable) because it looked the cleanest, and then spent a day thinking of the best way to create a shareable print/chopping it up/trying various joining options. I only altered one part of the knife - the handguard is “simpler” to make it easier to print, so it's really a 99% replica. There may/will be some strings on the upper lip of the grip overhangs. The handle prints standing up with a brim. The blade prints standing up using the handguard as its support.&nbsp;This print requires five minutes of post-print assembly but is worth the patience. There is a 1mm inset area in the blade guard where the handle will sit. The more time you spend cleaning out this area/testing the fitment before gluing (don't break the guide stick!) the stronger and cleaner the final product will be. The handle only slots in this groove one-way, so if it doesn't line up spin the handle and it will. I used a razor to clear the hole, and metal files to smooth the flat area. The green highlighted area in the one picture is where I applied glue. All of the strength is basically in this this 1mm area. Using liquid super glue I put a line down the guide stick, flat part of handle, and flat part of blade (essentially all connection points). Insert the guide rail, spin it to spread the glue, and hold against the wall/floor or clamp for 60 seconds before playing with it. The final result is what I consider a 1:1 replica suitable for costumes, cosplay, or any other safe use.&nbsp;<a target="_blank" href="https://skfb.ly/oJYDN" rel="nofollow noopener">KA-BAR USMC Knife by Urpo</a> is licensed under Creative Commons