Kabuki

stefanbauer

English:This door hook is a remix. Well, more or less. I rebuilt it from scratch in Onshape, and instead of the original file of 13.5 mm, I integrated a distance of 14.5 mm, because our doors are a bit wider.This stable door hook can be printed perfectly in PLA or PETG.<ul><li>Printed with Bambulab X1C</li><li>0.2 Layer height</li><li>Without support</li><li>Brim recommended</li><li>Printing time ~25min for 5 pieces</li></ul>German:Dieser Türhaken ist ein Remix. Naja mehr oder weniger. Eigentlich hab ich ihn von grundauf in Onshape nachgebaut, und statt der originalen Datei von 13,5 mm einen Abstand von 14,5 mm integriert, da unsere Türen etwas breiter sind.Dieser stabile Türhaken kann einwandfrei in PLA oder PETG gedruckt werden.<ul><li>Gedruckt mit Bambulab X1C</li><li>0.2 Schichthöhe</li><li>Ohne Support</li><li>Brim empfohlen</li><li>Druckzeit ca. 25 min für 5 Stk.</li></ul>

Doorhook / Türhaken 14,5mm

basket hooks

distrubi

<h3>Tealight lithopane stand</h3>I uploaded a modular and customizable lithophane lamp: <a href="https://www.printables.com/model/222458-customizable-and-modular-lithophane-lamp" rel="nofollow">https://www.printables.com/model/222458-customizable-and-modular-lithophane-lamp</a>In case you want to change a single lithopane on that lamp, I designed this little tealight stand for a single lithopane so you don't have to throw it away.Lithophane: I've used the following site to create the lithophane: <a href="http://3dp.rocks/lithophane/" rel="nofollow">http://3dp.rocks/lithophane/</a> Make sure to use a picture with a 1:1 ratio On the website select "outer curve" model Set your model settings to maximum size 100mm, thickness 3mm and border 3mm Also choose "positive image" in the image settings Set Curve to 85I made the radius of the groove a little bit smaller than the radius of the lithophane so that it has a nice tight fit.Let me also know if you have any suggestions!&nbsp;<h3>Print Settings I used</h3>Printer:Up! MiniRafts: YesSupports:NoResolution: 0.2Infill:15%Filament:Amazon Basics ABSWhite

Tealight lithophane stand

lithophane 

SH Designs

This Easter Morning scene consists of 3 flat panels and a base which holds each panel slightly curved. No glue needed. Use an LED candle or fairy lights to light the scene for a dramatic effect. Each panel is setup to print face down on the bed to produce a nice texture.&nbsp;There are two base options: With spaces to hold LED tea lights, or without. UPDATE: I changed the bases to print facedown on the bed - they look much better with the texture on the top. The LED light version will have supports that are to be removed after printing.&nbsp;UPDATE #2: Added a smaller size to fit the A1mini or for those wanting a smaller scene.  Thank you to @moneyman89 for the suggestion&nbsp;If you like this model, check out the <a target="_blank" href="https://makerworld.com/en/models/64103#profileId-67178" rel="nofollow noopener">3 piece nativity set</a> next Christmas!