0.2mm layer, 4 walls, 35% infill

Tolerance Optimized Mini Version v1.2—further reduced contact with the inner wall based on the optimized version

Only a 0.2mm nozzle can barely print all the text

Tolerance Optimized Version v1.2 - Removed Four Corner Protrusions (More Universal, Requires Ensuring Material Shrinkage Differences)

0.2mm layer, 2 walls, 15% infill

each 6mm segment, starting at 80mm/s, increasing by 20mm/s per step

Standard Tolerance Snugly Against Inner Wall v1.1 - Requires Ensuring Material Shrinkage Differences

0.2mm layer, 5 walls, 15% infill

0.2mm layer, 2 walls, 15% infill

Flea Special - 2mm deep

Printing only version

External Bracket for Dryer Box Storage Module (85A TPU prints well)

0.2mm layer, 3 walls, 15% infill

Plate 1 has a print pause! Plates 2 and 3 require different material supports!

4x2 total 12 magnets

Eight 8x3 magnets around the perimeter four 4x2 magnets in the middle (can be removed does not affect magnetic force) a total of 12 magnets

Flea-specific jacketed bearing

Common bearing for fleas

Housed universal bearing

General-purpose bearing