KOtzU69

RP47 Designs

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;You can complete this print without an AMS. Use the profile that says NO AMS and it will pause at the correct height instead of doing a filament change. At that point you change your filament and let it continue until the next pause where it will wait for the next manual filament swap. This being a four color Hueforge, it will require three pauses with manual filament changes.&nbsp;Filaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ Sunlu Grey Transmission Distance: 2 PLA+ IIID Max Space Gray Transmission Distance: 5 PLA+ Sunlu White Transmission Distance: 5&nbsp;Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Grey At layer #14 (1.2mm) swap to Space Gray At layer #19 (1.6mm) swap to White for the rest.

Valentines Heart Hueforge Art NO AMS Needed

valentine

3d print studio

This is my completed project of a fully mechanical, 3D printed clock.I decided to do an EPQ project, and my aim/title of my project was to make a mechanical clock, which in the course of about 5 months, I went from an idea, to planning and researching, and then designing and printing, as well as prototyping a clock out.its definitely not the best, I unfortunately didn't do my gear ratios correctly when designing so some gears are out of time, and it only runs for about 5 mins before stopping because of friction (for me), but its a cool concept to show what can be built using a 3D printer, and to show different design techniques, as well as to incorporate unique ways that 3D prints can be used.EDIT: I'm sooo happy to see loads of people like my design, and even downloading and printing my clock out, id love to see what people have made, its just exiting that people are actually printing my clock out despite it having flaws.please have fun printing this out and assembling it, and also feel free to make any modifications to this, this is still a work in progress, and I would like to see what other people do to this.&nbsp;Notes:Definitely print the frame and palace out with either high infill or high wall count, id recommend 2 walls with 90% infill, so that extra material doesn't expand the print outwards by a bit.print mainspring out with 3 walls and any percentage of infill (I did 20%), and ill also recommend flipping mainspring around and print with supports, so it has a better finish.all other parts just print how you want it, I did 2 walls with 20% infill for rest of parts, just be careful that the parts are in the right orientation without any overhangs.if you can, put some kind of silicone grease on the axels, as well as where the pendulum contacts with the escape wheel.

Mechanical Clock

ideas

Regarnogal

Gravitrax compatible marble corkscrew.Important to have enough Power so the marble comes through! ;)The 2 rings fit in the holes on the ground (makes it easier to print without supports)is printable without any supports on P1S and Bambu PLA&nbsp;i have added a second profile with separated parts

Marble Corkscrew Gravitrax compatible

gravitax

acevalsl

V2 UPDATE HERE:&nbsp;<a target="_blank" href="https://makerworld.com/en/models/157242#profileId-172507" rel="nofollow noopener">https://makerworld.com/en/models/157242#profileId-172507</a>&nbsp;&nbsp;Splitter, designed for the AMS Lite of the A1 mini and the A1. With this design you will be able to print from the outer filament without disconnecting anything.&nbsp;With this design, you don't add weight to the printer's head, avoiding problems&nbsp;The original design is for 1/8 thread&nbsp;Some people have asked what to buy. I am attaching an address as an example:&nbsp;<h2>PC4-M10 macho</h2>&nbsp;<a target="_blank" href="https://www.amazon.es/UniTak3D-Neum%C3%A1tico-Acoplador-Compatible-impresoras/dp/B08QMGHNLT/ref=sr_1_5?__mk_es_ES=ÅMÅŽÕÑ&crid=3MF9F8M8DUO59&keywords=Creality+Conector+PC4-M10&qid=1705944374&sprefix=creality+conector+pc4-m10%2Caps%2C158&sr=8-5" rel="nofollow noopener">https://www.amazon.es/UniTak3D-Neumático-Acoplador-Compatible-impresoras/dp/B08QMGHNLT/ref=sr_1_5?__mk_es_ES=ÅMÅŽÕÑ&crid=3MF9F8M8DUO59&keywords=Creality+Conector+PC4-M10&qid=1705944374&sprefix=creality+conector+pc4-m10%2Caps%2C158&sr=8-5</a>&nbsp;NEW: You can download it for metric thread 10. Thank Marcus T, you for your idea and your help to carry it out and be able to use this type of thread with metric. <a target="_blank" href="https://makerworld.com/en/u/1120084680" rel="nofollow noopener">https://makerworld.com/en/u/1120084680</a>&nbsp;&nbsp;A video of how to install it.&nbsp;NOTE: To remove the bracket, use a thin allen key from the other end and press.&nbsp;IT CAN BE DONE FASTER, BUT IT DOESN'T COME OUT CORRECTLY AND YOU CAN CLAM THE FILAMENT. I RECOMMEND USING THE PARAMETERS OF THE ORIGINAL 0.12 DESIGN&nbsp;<figure class="media"><div data-oembed-url="https://vimeo.com/894987401"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://player.vimeo.com/video/894987401" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allowfullscreen=""></iframe></div></div></figure>

Splitter AMS Lite A1 mini y A1

mods

Satisartes

Cute christmas gnome to decorate your home.I printed this one with 0.16 layer.

valentine

ideas

gravitax

mods

swieta