KORSiRO

Jan 3D

Bambu Lab Storage System&nbsp;UPDATE 24.11.2023Now with new LID for Full Hotends here is the LINK:<a target="_blank" href="https://makerworld.com/de/models/72681#profileId-77205" rel="nofollow noopener">https://makerworld.com/de/models/72681#profileId-77205</a>&nbsp;This is a newly developed storage system for all the Bambu Lab printers X1C / P1S, /P1PThe goal was to store all spare parts as well as the glue stick and the Allen key in one box. This was realized as space-saving as possible.&nbsp;The dimensions of the closed box are: 181mmx126mmx32mm&nbsp;The following parts can be accommodated: - Four hotends with all accessories (silicone sock, holders for the thermister as well as the corresponding screws). - Four nozzle wipers + mounting screws - Spare filament cutter - Nozzle cleaner - Glue stick from Bambu Lab - Allen wrench supplied - three times each Lubricant Grease and Thermal Grease&nbsp;The two parts are not joined together, the lid is just put on. &nbsp;Im happy to adapt my design if you want something changed, just contact me and we can work something out.&nbsp;Also look at may other Storage Box:<a target="_blank" href="https://makerworld.com/de/models/47503" rel="nofollow noopener">https://makerworld.com/de/models/47503</a>

Bambu Lab - Tools and Accessories Box

Storage / Organizer

3D Schoko

An indispensable tool. This holder helps you keep the tool head cover up and relieve the strain on the cable while changing the nozzle or performing maintenance work. It is aligned so that it fits perfectly in terms of height, depth and width without putting any strain on the cable. And at the same time it is wide enough to avoid wobbling. It is printed without support and brim. If you are not sure how good your bed grip is, activate the brim for better grip.&nbsp;Ein unverzichtbares Werkzeug. Dieser Halter hilft ihnen dabei die Werkzeugkopf Abdeckung oben zu halten, und das Kabel zu entlasten während sie die Düse wechseln oder Wartungsarbeiten ausführen. Er ist so ausgerichtet das er perfekt passt von der höhe , tiefe und breite ohne das Kabel zu belasten. Und gleichzeitig so breit ist um ein wackeln zu vermeiden. Gedruckt wird er ohne Support und Krempe. Wenn sie sich nicht sicher sind wie gut ihre Betthaftung ist aktivieren sie die Krempe für besseren halt.

X1, P1P, P1S Bambu tool head cover holder

Tools

Augustas

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000390314/design/2024-03-23_e3aef21a74483.png"></figure>&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/augustas" rel="nofollow noopener">https://www.buymeacoffee.com/augustas</a>&nbsp;Maximize your space and maintain cleanliness with our Compact Trash Bag Holder. Designed for efficiency and convenience, this holder is perfect for those who value a tidy environment. Its easy-to-print model allows for a hassle-free setup—simply glue it under your sink or inside your cupboard, either vertically or horizontally, to suit your space and needs.&nbsp;This trash bag holder boasts a minimalist design that doesn’t compromise on functionality. The cylindrical shape and ridged surface provide both aesthetic appeal and practical grip. It’s an ideal solution for organizing your garbage bags, keeping them tidy, and accessible without taking up valuable space.&nbsp;Choose from three different design files to match your preference and ensure the perfect fit for your space..

Trash bag holder

Home

KobaRiley

<h2>Cable Tidy for Bambu X & P Series</h2>Got a bit tired of the messy setup on the back of the printer, and designed some cable supports that don't need screws or magnets.Also got a bit carried away and designed a few different versions.&nbsp;The PTFE tube on the right side, that goes to the printer, is free to move back and forth, but stays in the channel.The cables and tubes keep everything in place, but I've added some double sided tape on mine to keep it a bit tidier.<h3>Install</h3>To install the plate, you need to remove the two cables, and the left hand side PTFE tube. Then, remove the PTFE tube at the connector closest to the printer… feed that tube through the hole in the cable tidy plate, and then just reconnect everything.&nbsp;I've had this running on two printers for about 20 prints each, and have had no issues.&nbsp;There are different designs available, from 4, 3, 2 and 1 colour. The 1 colour basic version is by far the fastest to print… The Texas version is my favourite, and looks much better in reality than my awful photos….&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/601192/2024-01-16_432ca9585a8cb.jpg">&nbsp;&nbsp;The cables and tubes can still be removed with the standard little tools that are everywhere on Makerworld, but I've included a couple that fit slightly better with with this plate.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/601192/2024-01-16_6a6ab2a212209.png"></figure>&nbsp;This project took several days, and many many test prints. If you like the model, and feel like buying me a coffee, it would be greatly appreciated. <a target="_blank" href="https://ko-fi.com/kobariley" rel="nofollow noopener">https://ko-fi.com/kobariley</a>&nbsp;

Cable Tidy - X1- P1S - P1P

Upgrades X1C

Steve Wagg

A easy print to enable wide spools to attach to the side of the Bambu X1 printer&nbsp;No support is required, fits the bigger spools. I&#39;m using it on all my Bambu printers now.&nbsp;Fix with something like 2 off M3 x 20mm screws to secure.&nbsp;Print at 0.2mm 30% infill / 4 wall&nbsp;Hope you like it…. send over a boost if you can :-)   Cheers ❤

Bambu X1/P1P/P1S Horizontal Side Filament Holder

Spool X1C

loloboss83

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 112.5x200mm in size This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Dark Gray At layer #13 (1.12mm) swap to Grey At layer #19 (1.6mm) swap to White for the rest.

Hueforge DragonBall Gohan

HueForge

Tommy Gun

Marvel Fan&#39;s !! fan art light box made for you guys to enjoy !!!&nbsp;Best printed the front panel face down&nbsp;Led Strip :<a target="_blank" href="https://fr.aliexpress.com/item/1005003901833984.html?spm=a2g0o.order_list.order_list_main.185.12835e5bhv800X&amp;gatewayAdapt=glo2fra" rel="nofollow noopener">https://fr.aliexpress.com/item/1005003901833984.html?spm=a2g0o.order_list.order_list_main.185.12835e5bhv800X&amp;gatewayAdapt=glo2fra</a>Led&#39;s BT controler : <a target="_blank" href="https://fr.aliexpress.com/item/1005004712701330.html?spm=a2g0o.order_list.order_list_main.5.29405e5bT6IvfX&amp;gatewayAdapt=glo2fra" rel="nofollow noopener">https://fr.aliexpress.com/item/1005004712701330.html?spm=a2g0o.order_list.order_list_main.5.29405e5bT6IvfX&amp;gatewayAdapt=glo2fra</a>&nbsp;Interested in selling my designs : <a target="_blank" href="https://patreon.com/Papa3dHomemadePrints" rel="nofollow noopener">https://patreon.com/Papa3dHomemadePrints</a>

Storage / Organizer

Tools

Home

Upgrades X1C

Spool X1C

HueForge

Led Lamp