KOCAMPO

Wcad00

UPDATE 9 - 25.03.2024<ul><li>updated profile REQUESTS - added plate 17 - user @gurthyy  wanted a new module to accomodate a mac mini on its side - added a new two space combo module for mac mini and keyboard/mouse</li><li>updated profile REQUESTS - added plate 18 - user @wmeringolo wanted a new module for miniature painting  - added a new combo module for cup + brushes</li></ul>&nbsp;UPDATE 8 - 16.03.2024<ul><li>updated profile REQUESTS - added plate 13 - user @bambibam  wanted a new combo 1x module for sd/ microsd/usbA/ usbC  - so there is a new combo module available</li><li>updated profile REQUESTS - added plate 14,15,16 - user @gurthyy wanted a way to angle the organizer after specific desktops - introducing Pizza Slices - angled 30degrees modules coming in two snap-on formats for now, but with room for much more customisation. Plate 14 has the universal pizza slice base + simple catch all top; plate 15 has an split/organized top, and plate 16 has a slide-on interchangable name plate - see photos in print profile. Everything was printed and tested for a perfect fit - check photos</li></ul>UPDATE 7 - 05.03.2024<ul><li>updated profile ACCENTS - user @Xanders_Builds noticed an issue i missed with the ‘’steps' accent brims not fitting corectly - too loose - now it is updated and fits fine</li><li>updated profile REQUESTS - added plate 10 -one new module  ASP @user_2207529250  and @bluebeansisradi requested a stand for a ps5 and xbox controller - new module that occupies two spaces and needs to be snapped into place - stand for ps5 and xbox controller - i tested a ps5 controller but i dont have a xbox, but it has some tollerance so it should fit fine - in case it does not, i made the module from two parts , so the stand can be exchanged - please let me know if that is the case</li><li>updated profile REQUESTS - added plate 11 -one new mod  for DRAWER MAX. user @Nerraw asked for a method of separating the drawer into smaller spaces - i made a very simple method of doing that - 4 interconnectible separators that can also be printed individually or by neccesity i guess</li><li>updated profile REQUESTS - added plate 12 -one new module User @zach13 asked for a method of organizing documents vertically so this is my take on it. The iddea was to make it sturdy because it is a little tall and not to waste too much material - it is made from 3 pieces - a base plate and to organizing stands that fit slightly different from each other so that the papers will stay a little cuved to maintain vertical position</li></ul>&nbsp;UPDATE 6 - 15.02.2024<ul><li>updated profile REQUESTS - added plate 7  - Reinforced top plate for the DM. @bosho.liviu requested a top plate so modules could be placed on top - Now you can do that, it is symetric and compatible in every direction</li><li>updated profile REQUESTS - added plate 8,9  - Two new modules . @bdwilson asked for two modules that have removable interior trays - plate 8 has a new 1space tray module and plate 9 has a new tilted marker combo with one large tray on the bottom. The front part of the removable tray is also slanted for easy removal</li></ul>&nbsp;UPDATE 5 - 11.02.2024<ul><li>updated profile REQUESTS - added plate 5  - Tough Plate for the DM. @Heimwerkerbienchen requested a tougher top plate so monitor could pe placed on top of the DrawerMax - has all the toughness required bells and whistles but i really cant guarantee how it will hold up in time - in my oppinion the entire assembly should be printed in a tougher filament, because altough the new plate has a support structure, the drawer modules themselfs are pretty thin so the weight of the monitor will be on the walls</li><li>updated profile REQUESTS - added plate 6  - Half Bow ties. @bdwilson had a very good ideea to close the holes on exterior modules so introducing half bow ties </li></ul>&nbsp;UPDATE 4 - 28.01.2024<ul><li>updated profile REQUESTS - added plate 4  - Steps + Tape dispenser combo unit. altough it was not a request, the plate has the name of the user that gave me the ideea - thank you for that @lilrepete</li><li>the new module is compatible with existing ACCENTS, plus the security wheel and the blade can be printed in other colours to keep things fresh</li><li>the blade slides into the module and is interchangable in case teeth break or you just want another colour. if you feel it fits too tight just trim the seam of it and it will slide more easily</li></ul>UPDATE 3 - 23.01.2024<ul><li>updated the printing order to outer/inner - not a big issue but some had problems - now all is well</li></ul>UPDATE 2 - 22.01.2024<ul><li>added a new print profile called ACCENTS</li></ul>In keepign with the modularity theme and ultra customizability i aim to develop, i made some mix or match brims to add an extra touch of colour to your organizer. everything fits in place without glue or force and same as everything else it is easily changable in case you want to switch up your look and keep it fresh.photos attached in the profile so please check them out. i know the colours i actually printed are not the best but it was all the filament i have till i get my new shipment&nbsp;UPDATE 1 - 19.01.2024<ul><li>added a new print profile called DRAWER MAX</li></ul>it is a drawer module that occupies 4 slots, is stackable and also highly customizablethe first tray for it, as you can see in the pictures is for the spare parts that come with the BambuLab printer + some extras. Fits the parts for two printers.make sure you follow the instructions in its profile to get perfect fits everywhere<ul><li>added a new print profile called REQUESTS</li></ul>this profile contains the user requests for modules. each plate will have the users name on it. this is going to be the profile i will update regularly, based on requests.&nbsp;&nbsp;I’ve been wanting to do this project since I made the first desktop organiser.The problem I wanted to address was, what if in a month you want or need something else, more, or less space, something specific, more room for usb, cards, crayons, etc, how do you keep a new look with minimal to no effort?&nbsp;I’ve seen there have been many attempts to do this but none really took of, so I asked myself why? I think the main reason was lack of interest derived from lack of support. If newer modules aren’t created, interest goes down, and it becomes the same thing as a normal organiser.Of course we have the gridfinity system witch is great honestly and other similar to it, but they all rely on the same premise, a base to keep everything together, so if you are full, you need another base, but does the base you need right away exist? or are you going to be left with extra slots.&nbsp;Maybe I didnt do my research right, and there are other options, all I tried to do was to make something universal, easy to print, elegant, very customisable, and most of all, something that doesn’t depend on screws, magnets and on a base to keep it all tied. I printed 10 bowties In less than 20 minutes on standard, and hold together 7 modules (the ones I use) and you can lift and move them as a whole, without having them fall or break&nbsp;The bow tie joint isn’t my ideea, it’s been used in woodworking for centuries. It is a robust way of holding things together and works quite well here too, especially printed the way I arranged it on the plates . All the modules can be connected in whatever orientation you want, except the laptop stand, because it needs room on the small sides for the length of the laptop/tablet. But that is it - I kind of made that specifically for me, because I use it as an end piece that fits under my P1S (like my first organiser)&nbsp;I am starting with 12 modules and will make a new one every other week, based on suggestions I hope, because I dont think I have enough creativity. I will put out my own ideas because I do have more, but everyone has diferent needs so if you think you can get on board with the ideea I welcome all input, and I will try to make whatever you want. Remix culture is strongly encouraged.&nbsp;Modules in the 3mf:&nbsp;PLATE 1<ul><li>Usbcombo1 (11 usb sticks + 5 full size memory cards + tray for usb caps)</li><li>Phone combo (fits iphone 15 promax + airpods pro)</li><li>Post-its (two full size stacks of postits)</li><li>Steps (4 equal holders - superglue, ties, hex set, mini uv lamp)</li></ul>PLATE 2<ul><li>12 bow tie joints - enough for about anything</li></ul>&nbsp;PLATE 3<ul><li>Hex single - roomie organizer - can be further split with the splitters on plate 8</li></ul>&nbsp;PLATE 4<ul><li>Laptop wedge - macbook pro + ipad pro 12.9 + apple microfiber slot - made to be wedged under the x1 or p1</li><li>Laptop standard - - macbook pro + ipad pro 12.9 + apple microfiber slot + additional slot</li></ul>PLATE 5<ul><li>Tilted marker combo - 12 thick markers + pens and other + paperclip 3 + misc tray</li></ul>PLATE 6<ul><li>apple watch dock double - 2 apple watch charger pucks - like the original - cable management + full size post it tray</li></ul>PLATE 7<ul><li>Hex double - double the size of the single - can be further split with the splitters on plate 8</li></ul>PLATE 8<ul><li>5 split plates for the hex series</li></ul>PLATE 9<ul><li>apple watch dock single - 1 apple watch charger puck - like the original - cable management</li></ul>PLATE 10<ul><li>Usbcombo A - 6 usb sticks + 5 full size memory cards + tray</li></ul>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;

The Organizer

Office

LoboCNC

How many times have you needed a thin strip of tape, tried cutting it with scissors, and been left with a sticky wad? This slitting tool lets you accurately set the desired width, and then precisely slits the tape while still on the roll. It uses standard single edged razor blades, and requires a 10-32 x 2" long screw and a rubber band to complete the assembly.<h3>Print Settings</h3>Printer:UDIORafts: <div>Doesn't Matter</div>Supports:NoResolution: <div>0.2mm</div>Infill:20%Filament: Inland PLA Dandelion Yellow Notes: <div>The slider piece has a built-in support that needs to be broken away after printing. Make sure to sand off any blobs or strings from the dovetail slide before assembling. It's best if you can tap the hole for the 10-32 adjustment screw, but you can also just jam the screw in to form the thread. To use, first insert the blade at a slight angle. Then push the exposed end of the blade back towards the dovetail where the corner will be captured by a small lip that keeps the blade from sliding back out as you cut. After assembling the slider onto the base, add a rubber band to keep the adjustment screw pressed against the base.</div>Category: Hand Tools

Tape Slitting Tool

Cool Prints

Bike Accessories

wuguigui

<div><h1>Summary</h1><div>This is an action base for Bandai 30 minutes sisters.0.1-0.2 level height, 80% infill recommended.enjoy!</div><h1>Post-Printing</h1><img src="https://cdn.thingiverse.com/assets/bf/f0/08/25/bb/_20220330101601.jpg" alt="image"><pre><code> <img src="https://cdn.thingiverse.com/assets/bb/5a/41/92/d6/_20220330101550.jpg"></code></pre></div>

Action Base

Gunpla / Model Kits

Jorge Rui

<h3>Introduction</h3><blockquote>3mf files are for use only on bambu studio and Orca Slicer - Latest version. Step files are available for the most excellent Prusa Slicer and others.</blockquote>&nbsp;This is my idea of a keychain. The tags are large, and the colors are bright, so maybe it's not so easy to miss. <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354015/2023-10-10_xyhck86v113n.jpg"></figure>This keychain is an elegant, highly customizable, and practical solution. Who has ever used a traditional keychain closet, knows that it is not always easy to put the keys there.<figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354015/2023-10-10_gh7m00henasp.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354015/2023-10-10_et9ho9yhlkf7.jpg"></figure></td></tr></tbody></table></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354015/2023-10-10_kktrixy3yq5q.jpg"></figure>It can be used with the tags, but also with simply the key (as long as they have some iron on it). It works with the magic and invisible magnetic force, if the keys are from brass to aluminum, the solution is to use one of the available tags. <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354015/2023-10-10_73tz8bljc3ut.jpg"></figure><h4>Smart</h4>For those who are in the home rental business, or have a home with home automation, I also added the possibility to add an <a target="_blank" href="https://en.wikipedia.org/wiki/Radio-frequency_identification" rel="nofollow noopener">NFC</a> Tag to each of the keychain docks. This way, you can give directions to your guest or automate something every time you bring your <a target="_blank" href="https://en.wikipedia.org/wiki/Radio-frequency_identification" rel="nofollow noopener">NFC Tag </a>reader close to the dock. If you don't find this interesting, just don't use the NFC Tag ;)ChallengeI leave here a challenge to those who are more comfortable with electronics, namely using and programming the <a target="_blank" href="https://en.wikipedia.org/wiki/ESP32" rel="nofollow noopener">ESP32</a>. If anyone is interested in collaborating in order to put a microcontroller in the dock, please contact me. The idea that by putting the key on the keychain and start an action is interesting. (this, of course, without using the mobile phone). NFC Tag was the simplest way I found to enable this kind of interaction, but you always need a mobile phone nearby… Well, it's not bad, but an ESP32 will be better, but then we have the battery problem… ;)<h4>How it works</h4><ol><li>Simply hold the tag or key close to the dock and the magical magnetic force will do the rest. </li><li>If you are already in the future, whenever you think it is necessary, you can bring your phone close to the dock and trigger a set of actions. I know that with iOS this is very easy through the automations in the Shortcuts app, and I'm sure that on Android it won't be difficult either. Regardless of the system and in a universal solution, <a target="_blank" href="https://www.home-assistant.io/" rel="nofollow noopener">Homeassistant </a>works great with ID tags.</li></ol>But enough about automation, that was something I decided to add and that wasn't the reason I made this keychain. <h4>Available variations</h4><ul><li>Colors for ID the dock and the tags, choose any colors you like.</li><li>3D printable labels on the dock (Garage, House, Office and Mailbox). Some more could be available for members. This you have to download here, they can be remixed, that way you can add your text.</li><li>Version to add labels as stickers.</li><li>A dock version to hang.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354015/2023-10-10_7j5oec22wkpa.jpg"></figure><h3>Print instructions</h3>This project is designed to make printing easy, but there are a few things you should take into consideration.The tag has a neodymium magnet embedded in it. Therefore, it will be necessary to program a pause in the last layer where the pocket where the magnet is inserted is closed.<figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/354015/2023-10-10_1p5q6bf8f69w.jpg"></figure>These files can be remixed, so the copyrights of does is different from this one, the only way I know to make this is by creating a new project.You can download here:<ul><li><a target="_blank" href="https://makerworld.com/en/models/38287" rel="nofollow noopener">Tags and Labels for the Keychain</a></li></ul><h3> </h3><h3>Assembly instructions</h3><ol><li>Print the parts.</li><li><a target="_blank" href="https://amzn.to/46irZ3A" rel="nofollow noopener">Get some neodymium magnets </a>and, if you want, some <a target="_blank" href="https://amzn.to/3rKJif0" rel="nofollow noopener">NFC Stickers</a>.</li><li>Assemble the dock (this example is good for all version.<ol><li>Force the magnet on its socket (can help push it against a piece of wood, don't use metal, the magnet will break).</li></ol></li><li>The name label on the top will press fit.</li><li>For better adhesion of the parts, you can use double-sided adhesive tape. <ol><li>Something like <a target="_blank" href="https://amzn.to/3rTK3Cp" rel="nofollow noopener">this</a></li></ol></li><li>If needed, you can glue it all.</li></ol><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354015/2023-10-10_r26u97h2ahzx.jpg"></figure> 6. If you go for the rail fixing, please choose one of the configurations available on the 3mf file. Remember that you can use the cut function on the slicer. <figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=nyevb4B_NB8"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/nyevb4B_NB8" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><h3>Material</h3><ul><li><a target="_blank" href="https://amzn.to/46irZ3A" rel="nofollow noopener">2x neodymium magnets of 10x3mm</a> (one for the dock, other for the Tag)</li><li><a target="_blank" href="https://amzn.to/3rKJif0" rel="nofollow noopener">1x NFC sticker Tags</a> (if you plan to use them)</li><li>For the rail fixation, you will need bolts of about 4mm in diameter. </li><li>For a small help, use this affiliate link to buy filament, it will cost you the same. Thanks ! <ul><li><a target="_blank" href="https://shareasale.com/r.cfm?b=2354730&u=4026304&m=138211&urllink=&afftrack=" rel="nofollow noopener">Filaments used on this project</a></li></ul></li></ul><h4> </h4><h4>Development</h4>I think it might be interesting to show what's behind a finished product, so from this project onwards I can include some information regarding product development. Give some feedback if you find it interesting or if you find this irrelevant.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354015/2023-10-10_nk7t1q5kb3pq.jpeg"></figure><h3>Change log:</h3><ul><li>(12-10-2023) - Added blank labels; download file: “Name_blank.step” and “Tag_blank.step”.</li></ul><figure class="table" style="width:97.1%;"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td><figure class="image image_resized" style="width:81.16%;"><img src="https://makerworld.bblmw.com/makerworld/draft/354015/2023-10-12_8cc3cc988b56e.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354015/2023-10-12_d7a7c61134e7e.jpg"></figure></td></tr></tbody></table></figure><h4>Support the designer:</h4><ul><li>This design is free for the benefit of the community, but If you like my designs and want to contribute, you can make a donation to <a target="_blank" href="https://www.buymeacoffee.com/designrepcom" rel="nofollow noopener">buymeacoffee </a>or <a target="_blank" href="https://www.paypal.com/donate/?business=BUM67EMDJRXSN&no_recurring=0&currency_code=EUR" rel="nofollow noopener">paypal, </a>or even better, join “My Club” here in printables.com, that will be greatly appreciated.</li></ul><a target="_blank" href="https://www.printables.com/@jorge_rui" rel="nofollow noopener">And check my other projects, maybe you find there something usefull</a>

Keychain and Tags

House

maxaruta

<h2>Description</h2>I use these mainly to close herb bags, but I've found they're handy for all sorts packs, like breakfast cereals, tea leaf bags, etc.The included 3MF has 10 of them. Just "right-click - Set number of instances" in PrusaSlicer to change how many you wish to print.&nbsp;<h3>TIPS</h3> Use different colors for different types of herbs&nbsp;<ul><li>Green - herbs</li><li>Red - meat spices / hot</li><li>Blue - fish spices</li><li>etc.</li></ul>Also, don't forget you can scale them up for bigger bags (cereals).The initial design was inspired by Paul Belcher's clip, but then I've re-drawn it from scratch and ended up changing basically everything about it and adding an extra spring feature.<h3>Print instructions</h3>You might be better off printing them from a stiff material (PLA, ASA). With PETG they might be a little bit too flexible, though the difference isn't big. &nbsp;&nbsp;&nbsp;&nbsp;<a target="_blank" href="https://www.printables.com/model/6806-small-clip-for-herb-bags-other-packaging" rel="nofollow noopener">Credits</a>

Bambu Clip - Small Clip for Bag

Kitchen

thrutheframe

<h5>Description</h5>It was high time I build a brass insert press rig. There were several designs available on Printables and Thingiverse, but me being me, I had to design my own over-engineered version with the parts that I have at my disposal. I took inspiration from Adafruit's design.After posting the make on a Facebook group, I got several requests for the stls. So here they are. Some things to note:Files such as “rail_stop x4.stl" mean you will need to print 4 pieces. All parts can be printed in PLA except “solder bracket.stl” which comes in contact with the soldering iron. It needs to be printed in ABS, ASA or at least PETG. you can use cable tie to secure the belt to the Front and Rear brackets.In the spirit of open source, I have add the STEP files for you to refer, edit and remix. There is also a 3mf with the parts all placed for Bambu Lab printers. Please note that the design choice was based on the items I have at hand. Enjoy your build. that's all folks.&nbsp;<h5>BOM</h5>2020 aluminum profile (not v-slot) any length above 30cm will be goodMgn9c linear rail (18-20cm) - 2sets GT2 6mm belt (any cheap stuff will do)GT2 20T m3 6mm idler - 1pcsF623ZZ m3x10x4mm flanged bearings - 4pcs<figure class="image image-style-align-center image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/383438548/draft/2023-08-19_obg70zhzrjum.png"></figure>There is a counterweight box “cw_box.stl" and ”cw_box lid.stl". You can extend the box height to put allow more weight. The mounting holes can also be used for a Nema17 stepper motor. <figure class="image image-style-align-center image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/383438548/draft/2023-08-19_hhs04lk6suxr.png"></figure>&nbsp;&nbsp;<h5>Screws and fixtures for printed parts</h5>Front & Rear bracket <ul><li>M3x6mm - 10pcs</li><li>brass insert m3x4.6x3 - 3 pcs</li></ul>Rail stop x4<ul><li>m3x6mm + T-nut - 4sets</li></ul>Front bracket arm<ul><li>m3x6mm -3pcs</li><li>m3x10mm + nut - 2sets</li></ul>Left and Right pulley bracket<ul><li>m3x25mm - 3pcs</li><li>m3x6 + T-nut - 2sets</li><li>brass insert m3x4.6x3 - 3pcs</li></ul>2020 bracket<ul><li>m3x6 + T-nut - 4sets</li><li>M4x10 - 4pcs</li></ul>&nbsp;<h5>Conclusion</h5>To date (Oct 2022) all my designs are free to download and use. There is no Pateron or OnlyFan (hahaha). If you like my designs and want to contribute to my coffee addiction & help fund the filaments I need for prototyping, a donation of $5-$10 to <a href="https://ko-fi.com/thrutheframe" rel="nofollow">Ko-fi</a> or <a href="https://www.paypal.com/paypalme/shannonheng" rel="nofollow">paypal.me</a> will be greatly appreciated. &nbsp;<h5>Caveat</h5>As with all my designs, it may and may not work for you. So print and install at your own discretion.

Heat Insert Press (mgn9c remix)

Print Queue

I like the design of Bounet's clog pusher. I wanted to include a ptfe tube within to help guide the filament when doing a cold pull to clear out the clog. I designed 2 versions to have the 2 screws secured by either nuts or brass inserts. if you are using brass insets, you will need 2 pcs of M3xD4.6XL3 For the brass insert version, insert it carefully as it can distort the wall making the print head fit difficult.Print in petg, abs or any high temp filament. thank you Bounet for sharing this wonderful design. If you like my designs and want to contribute to my coffee addiction, a donation of $2 to <a href="https://ko-fi.com/thrutheframe" rel="nofollow">Ko-fi</a> or <a href="https://www.paypal.com/paypalme/shannonheng" rel="nofollow">paypal.me</a> will be greatly appreciated. <h5>Caveat</h5>As with all my designs, it may and may not work for you. So print and install at your own discretion.

Bambu Lab X1C Clog Pusher Remix

Tools

<h3>NOTE:</h3><ul><li>Please read the instruction guide below.</li><li>Download the 3mf file if you are using a Bambu slicer. Download the stl if you are using other slicers.</li><li>I do my best to double-check and test the print profiles I created. Therefore, I will only take feedback and update for those profiles. I cannot vouch for profiles uploaded by others, so please do due diligence.</li></ul>&nbsp;UPDATE 8 Apr2024I believe in working with local small businesses when selecting regional vendors. Unlike established companies that are good at managing logistics and sales, small businesses or new start-ups are still learning the ropes, and sometimes make mistakes. Everyone makes mistakes, but it&#39;s important to make things right and work towards improvement.&nbsp;Bento mini is now available with Australia vendor JC-3D. They have improved their ops &amp; logistics. There will also be no more pre-orders to prevent late fulfilment.&nbsp;VENDORS:The US vendor for Bento mini - A collaboration between ThrutheFrame and Voxelpla to offer a complete set (printed in pet-g) with acid-free activated carbon included. For more information, please visit <a target="_blank" href="https://voxelpla.com/products/bento-mini" rel="nofollow noopener">Voxelpla Store</a>.<figure class="image image_resized" style="width:50.06%;"><img src="https://makerworld.bblmw.com/makerworld/draft/831278/2024-04-08_c831ba7c6a3f4.png"></figure>&nbsp;The AUS vendor for Bento mini is available for sale on JC-3D. It is printed in PET-g and comes fully assembled with activated carbon. For more information please visit <a target="_blank" href="https://jc3dmelb.com.au/products/bento-box-mini" rel="nofollow noopener">JC-3D</a>.<figure class="image image_resized" style="width:50.1%;"><img src="https://makerworld.bblmw.com/makerworld/draft/831278/2024-04-08_e421349ae0742.png"></figure>&nbsp;<h3>INTRODUCTION</h3>In September 2022, I designed the<a target="_blank" href="https://www.printables.com/model/272525-bentobox-v20-carbon-filter-for-bambu-lab-x1c-enclo" rel="nofollow noopener"> BentoBox</a> air scrubber for the X1C and enclosed P1P (such as<a target="_blank" href="https://www.printables.com/model/356301-arc-bambu-lab-p1p-enclosure" rel="nofollow noopener"> ARC</a>) to be used for printing ABS. This helps to reduce the fumes and VOCs build up within the enclosure. When I decided to build the Voron V0.2, I needed a BentoBox with a smaller form factor. Not an easy project due to the limited space within the V0,2 chamber. It has to be small, powerful and visually pleasing.Meet Bento mini. Small in size, powerful, and looks like a little bento for kids. The front dimension is the same as an iPhone 10. It uses a strong 6028 blower fan to push air thru the carbon pellets. There are 4 mounting holes where brackets can be customized for different enclosed printers.<h3> </h3><h3>What Does the Bento mini do?</h3>It is an activated carbon air scrubber housed within an enclosed printer. By cycling air thru activated carbon pellets within the chamber, it helps to reduce fumes and VOCs when printing filaments such as ABS, ASA and Nylon. This method of filtering air within an enclosure is called multi-pass which results in better filtration.&nbsp;<h3>What Advantages does it have over others?</h3><ul><li>Bento mini uses a more powerful fan (6028 vs 5015) which allows it to push air thru the pellets more efficiently.</li><li>When installed, it collects the hot air from the top and exhausts it at the bottom. This allows proper air convection current which helps maintain a steady enclosure temperature.</li><li>it is cuter.</li></ul>&nbsp;<h3>BOM</h3><ul><li>BHCS M3x6mm - 6</li><li>BHCS M3x8mm - 2</li><li>Brass inserts M3OD5mmH4mm - 7</li><li>6028 Blower fan - 1</li><li>Magnets Ø6x3mm - 2</li></ul>&nbsp;<h3>Where to Buy Your Consumables</h3>( links below are not affiliated unless stated)Acid-free activated carbon:US - Voxelpla offers acid-free activated carbon in a 1lb pack and HEPA filter replacement. You can support the Bento mini project by buying it from this affiliated link: <a target="_blank" href="https://voxelpla.com/thrutheframe" rel="nofollow noopener">https://voxelpla.com/thrutheframe</a>EU - Veetec3D offers acid-free activated carbon in 150gm &amp; 450gm. You can support the Bento mini project by buying it from Veetec3D Store for <a target="_blank" href="https://veetec3d.etsy.com/listing/1545297808/veetec3d-acid-free-activated-carbon" rel="nofollow noopener">Activated Carbon</a>&nbsp;JPN<ul><li>「KOTOBUKI パウーバイオ」はテストしました、酸は含まれていません</li><li>This <a target="_blank" href="https://www.monotaro.com/p/2090/5517/" rel="nofollow noopener">seller</a> in Japan was recommended by a user it has a PH of 9.8.</li></ul>&nbsp;I bought the 24V Dual Ball Bearings 6028 fans from <a target="_blank" href="https://www.aliexpress.com/item/1005003792895461.html?spm=a2g0o.order_list.order_list_main.23.67a01802juygsr" rel="nofollow noopener">GDStime</a> on Aliexpress.Order 5V if you intend to use a standalone power supply. Order a 24V if you intend to use the printer&#39;s PSU&nbsp;<h3>INSTRUCTION</h3><ul><li>Please download the user guide.</li><li>The 3mf file is prepared in OrcaSlicer in a multi-plate project style, it can only be opened with OrcaSlicer or Bembu Slicer.</li><li>The STL files are available in a folder if you require them.</li></ul>&nbsp;<h3>DIMENSIONS</h3><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/831278/2023-08-27_3069d2d585eb.png"></figure><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/831278/2023-08-27_3eb430cf785c1.png"></figure>&nbsp;To date, my designs are free to download and use. There is no Patreon or OnlyFan (hahaha). If you like them and want to contribute to my coffee addiction &amp; help fund the filaments I need for prototyping, a donation of $5-$10 to <a target="_blank" href="https://ko-fi.com/thrutheframe" rel="nofollow noopener">Ko-fi</a> or <a target="_blank" href="https://www.paypal.com/paypalme/shannonheng" rel="nofollow noopener">paypal.me</a> will be greatly appreciated.&nbsp;<h4>Caveat</h4>As with all my designs, it may and may not work for you. So print and install at your own discretion.

Bento mini for Bambu Lab X1C P1P and Voron V0.2

Printer Upgrades

hako85

CubeBoy pullback car.&nbsp;Use a commercially available pull-back car spring. Tire diameter corresponds to 14 mm or less.&nbsp;The shape is modeled after “Stack-chan”.If you're curious about “Stack-chan”, please be sure to search for it. “Stack-chan” is a super kawaii (cute) robot with a built-in microcontroller developed by “Shishikawa-san”.

CubeBoy pullback car

Toys

DWdesigns

Experience the sensation and sounds of cocking the hammer and pulling the trigger with this simple fidget toy. It does not look like a gun. In fact, from one side the shape looks like a toy whale jumping out of water. &nbsp;I have made it as simple a design as I can think of. There are only 6 parts and assembly takes under one minute. The open design makes the trigger mechanism visible.&nbsp;Even though I designed this for the cocking and pulling actions, I have found myself fidgeting with it in the following additional ways, three of which do not make sounds.&nbsp;<ol><li>Pull the hammer down slightly but not enough into the cocked position, let the thumb slip and the hammer snap back up. Repeat. This action makes a crisp clicking sound. The feel of the spring and the crisp sounds are very pleasant and satisfying, and somewhat addictive :). A variation of this is to not let the thumb slip but hold onto the hammer as it moves back to feel the spring. This variation makes some noise.</li><li> Without the hammer in the cocked position, pull the trigger slightly and let the index finger slip and the trigger snap back into its natural position. Repeat. This action makes a crisp clicking sound. A variation of this action is to not let the index finger slip but hold onto the trigger as it moves back to feel the spring. This variation makes almost no noise.</li><li>Alternate between 1 and 2 above.</li><li>Roll the thumb on top of the trigger anchor pin, or the top of the hammer anchor pin, or alternating between the two. This action doesn’t make any sounds. If the top of the pins are not smooth enough, lightly sand or use a heat gun to smooth them out.</li><li>Push the hammer spring into the space between the hammer and the trigger, then flip it back out. This action makes noise.</li><li>Disassemble and reassemble the toy. Disassembly needs no tool and is easy to do, so it’s tempting to take it apart and put it back together, just for fun.</li><li>This last one is a bit tricky but I have done it when sitting in a chair with armrests: hang this toy upside down with the thumb holding the top of the spring anchor pin and the index finger or middle finger pressing on the opposite side of the handle, then swing it gently. It’s tricky because the index or middle finger has no easy spot to hold on to and the toy wants to drop down as it swings. I have not done it enough to the point that I can do it without paying attention.</li></ol>Easily print with PLA and PETG (the springs and the snap ring). No support, no brim. 100% 3D printed. Easy assembly (and disassembly). No tool is needed, no rubber bands, no screws, no glue. &nbsp;There are two versions, one for right-handed people and the other for left-handed people. Print profiles are provided for each. &nbsp;A fair warning though: The springs are 3D printed with plastic. So they will not last long but wear out and break after a certain amount of use. It comes with the territory of making something 100% 3D printed. Fortunately you have a 3D printer :). It’s recommended to print out some extra hammer springs for easy quick replacement. In any case, let me know what your experiences and thoughts are and I may consider modifying it next time to use steel springs.&nbsp;Instructions are provided for assembly, disassembly and use. Photos are extensively used in the step-by-step instructions for easy following.&nbsp;Choose your own favorite color combinations for different parts. However, at least one easily visible part should be printed using a bright color. If a wallet can be mistaken for a gun from a distance, this, too, can be.