KANEE.BAE

jetpad

The EZ-Z Luber is an EaZy way to lubricate the Z-axis screw of your printer. This handy tool screws onto the end of a Super Lube tube, allowing for precise and clean application without getting grease on your hands.&nbsp;To use, simply replace the cap on the Super Lube tube with the EZ-Z Luber. Straddle the sides of each Z-axis screw with the applicator and turn it clockwise. The EZ-Z Luber hugs the screw, and when you squeeze the tube, lubricant is applied directly to all sides of the screw simultaneously. Move it up and down along the screw to cover the entire length. You’ll be finished in no time.&nbsp;There are two versions of the EZ-Z Luber. One version includes feet, allowing it to stand up on its own when not being used. The other version is footless and designed to fit better in tight spaces like on the A1&#39;s lead screws. &nbsp;Happy Printing!&nbsp;Also available is a <a target="_blank" href="https://makerworld.com/en/models/503962#profileId-419504" rel="nofollow noopener">dust and dirt cap</a> that fits the EZ-Z Luber.&nbsp;Custom Filaments  <a target="_blank" href="https://makerworld.com/en/models/438259" rel="nofollow noopener">Tricolor</a>    <a target="_blank" href="https://makerworld.com/en/models/446943" rel="nofollow noopener">Quad-Color</a>    <a target="_blank" href="https://makerworld.com/en/models/460079" rel="nofollow noopener">Custom Colors</a>    <a target="_blank" href="https://makerworld.com/en/models/477652" rel="nofollow noopener">Stratified</a>

EZ-Z Luber - The EaZy way to lubricate the Z-axis

도구

Lambu Bab

I made this when I lost the original cigarette lighter plug in my car.Tested on an BMW, but it should work for all 12v sockets in cars.&nbsp;Print standing as picture shows with outer supports. I printed mine in PLA, but if you live in a warmer climate, ABS, ASA or PETG is prefered.

Car cigarette lighter plug

자동차

NoycePrints

Meet Dum-E, the handy desk helper industrial robot. I designed it with purpose in mind as it can function as a phone stand, webcam mount (logitech c920) and a business card holder. It doesn&#39;t end there though, as I aim to develop this platform with further attachments in future. These may be recommended from others and/ or what I think might be useful. I hope you find it useful and please feel free to comment any recommendations for attachments you would like to see in future. I look forward to seeing your different uses/ prints and colour schemes. Thank you for your continued support :)&nbsp;To keep files from getting complicated, I have only included the phone stand attachment in this upload. I have placed optional attachments in a sperate upload available on my profile titled “Dum-E optional attachments”. This will be periodically updated with new wrist attachments I think may be of use or other people suggest. Printing helper<figure class="table"><table><tbody><tr><td>Part</td><td>Quantity</td><td>Infill</td><td>Supports required</td></tr><tr><td>Arm 1</td><td>1</td><td>25%</td><td>YES</td></tr><tr><td>Arm 2</td><td>1</td><td>25%</td><td>NO</td></tr><tr><td>Shoulder Joint</td><td>1</td><td>30%</td><td>YES</td></tr><tr><td>Wrist to attachment connector</td><td>1</td><td>40%+</td><td>YES</td></tr><tr><td>Turntable</td><td>1</td><td>20%</td><td>NO</td></tr></tbody></table></figure><figure class="table"><table><tbody><tr><td>Part</td><td>Quantity</td><td>Infill</td><td>Supports required</td></tr><tr><td>Base</td><td>1</td><td>20%</td><td>NO</td></tr><tr><td>Feet</td><td>1</td><td>20%</td><td>NO</td></tr><tr><td>XL motor</td><td>1</td><td>15%</td><td>NO</td></tr><tr><td>Large motor</td><td>1</td><td>15%</td><td>NO</td></tr><tr><td>Medium motor</td><td>1</td><td>15%</td><td>NO</td></tr><tr><td>Small motor</td><td>1</td><td>15%</td><td>NO</td></tr></tbody></table></figure><figure class="table"><table><tbody><tr><td>Part</td><td>QTY</td><td>Infill</td><td>Supports required</td></tr><tr><td>Phone stand backing</td><td>1</td><td>25%</td><td>NO</td></tr><tr><td>Phone stand bottom</td><td>1</td><td>25%</td><td>NO</td></tr></tbody></table></figure>Required for assembly Superglue for fake motor attachment and Nitrile cord.1mm nitrile rubber cord, 16cm should be enough for 1 complete arm. This is only required between joints if you intend on supporting the weight of a phone etc. Alternatively, if you have TPU filament you can use Fat Tony&#39;s handy TPU O-rings. They&#39;re a quick print and don&#39;t require superglue to fit. You can get them here: <a target="_blank" href="https://makerworld.com/en/models/205832#profileId-225948" rel="nofollow noopener">https://makerworld.com/en/models/205832#profileId-225948</a> Thanks again for the great alternative Tony!&nbsp;As an optional extra, I&#39;d recommend using 4x 3M 6mm Anti-slip sticky back rubber feet. They fit in recessed circles in the corners of the feet.&nbsp; Screws: A total of 13 are required for the arm plus 3 for the phone stand, listed below.M3x10mm - QTY 12 - available on the store, linked below.M3x15mm - QTY 3M5x30mm - QTY 1Foot: 4x M3x10mm countersunk.Base: 1x M3x15mm countersunk.Shoulder joint to Arm 2 rotation point: 1x M5x30mm countersunk.Turntable: 4x M3x10mm countersunk.Rotation point between Arm 1 and Arm 2: 1x M3x15mm countersunk.Arm 1 to wrist connector rotation point: 1x M3x15mm countersunk.Coupling attachment to wrist: 1x M3x10mm countersunk.3 M3x10mm screws are required for the Phone stand. Assembly tipsCut 3 lengths of Nitrile cord, 74, 55 and 30mm in length. Glue one side of each and cure into individual circles. These will be glued on one side between the 3 separate joints on the arm. Doing this will vastly improve the holding capacity of the arm as it will provide more friction between the joints, helping to prevent them from sagging under weight.The 74mm circle goes between the elbow joint and arm 2.The 55mm circle goes between the arm 1 and 2 joint.The 30mm circle goes between the arm 1 and wrist attachment connector.I have added 3 pictures as a guide at the end of the gallery.

Dum-E the handy desk buddy. Lamp, stand, holder 

DesignCraft

This adapter system wraps the edges of a CREALITY CR-PLA MATTE 1kg 199x68mm cardboard spool in order to:<ul><li>provide smooth rotation within a Bambu Lab AMS</li><li>prevent carboard debris from depositing within a Bambu Lab AMS</li></ul>Features:<ul><li>Reusable</li><li>CREALITY nameplate for easy identification when reusing</li></ul>Instructions:<ul><li>Measure your spool first to ensure it matches the specified dimensions</li><li>Print this model twice for a single spool</li><li>Affix one spool ring adapter on each side of the CREALITY CR-PLA MATTE spool</li><li>See attached photos</li></ul>Considerations:<ul><li>Print Material: Please print with a basic PLA or PETG to minimize any shrinkage.</li><li>Too Tight? Too Loose? Cardboard expands with humidity and contracts when dried. A cardboard spool that has absorbed too much moisture may cause the adapters to fit very tight. Placing the spool in a filament dryer, such as the SUNLU S2, for a bit should resolve this. Note, you should not dry the spool with the adapters attached as they can warp in the heat. Keep in mind that after a long drying session the adapters may fit too loose. This should resolve itself shortly as the cardboard reabsorbs some moisture from the air.</li><li>AMS Lid Doesn't Close? All of the spool adapters I make are less than the official AMS spool clearance limit of 202mm, as specified on the official AMS product page, and as tested within my own AMS. However, some people have stated their spools are rubbing against the lid with the adapters attached. It's hard to say what's causing this since I cannot reproduce the issue myself, however, I've created an <a target="_blank" href="https://makerworld.com/en/models/33133" rel="nofollow noopener">AMS Lid Riser</a> which allows you to keep your AMS lid closed while providing additional clearance for larger filament spools. It's a quick and easy print which you can find on <a target="_blank" href="https://makerworld.com/en/u/243407759" rel="nofollow noopener">my profile</a> or directly here: <a target="_blank" href="https://makerworld.com/en/models/33133" rel="nofollow noopener">https://makerworld.com/en/models/33133</a></li></ul>

CREALITY CR-PLA MATTE Bambu Lab AMS Cardboard Spool Adapter Ring

Wcad00

UPDATE 9 - 25.03.2024<ul><li>updated profile REQUESTS - added plate 17 - user @gurthyy  wanted a new module to accomodate a mac mini on its side - added a new two space combo module for mac mini and keyboard/mouse</li><li>updated profile REQUESTS - added plate 18 - user @wmeringolo wanted a new module for miniature painting  - added a new combo module for cup + brushes</li></ul>&nbsp;UPDATE 8 - 16.03.2024<ul><li>updated profile REQUESTS - added plate 13 - user @bambibam  wanted a new combo 1x module for sd/ microsd/usbA/ usbC  - so there is a new combo module available</li><li>updated profile REQUESTS - added plate 14,15,16 - user @gurthyy wanted a way to angle the organizer after specific desktops - introducing Pizza Slices - angled 30degrees modules coming in two snap-on formats for now, but with room for much more customisation. Plate 14 has the universal pizza slice base + simple catch all top; plate 15 has an split/organized top, and plate 16 has a slide-on interchangable name plate - see photos in print profile. Everything was printed and tested for a perfect fit - check photos</li></ul>UPDATE 7 - 05.03.2024<ul><li>updated profile ACCENTS - user @Xanders_Builds noticed an issue i missed with the ‘’steps' accent brims not fitting corectly - too loose - now it is updated and fits fine</li><li>updated profile REQUESTS - added plate 10 -one new module  ASP @user_2207529250  and @bluebeansisradi requested a stand for a ps5 and xbox controller - new module that occupies two spaces and needs to be snapped into place - stand for ps5 and xbox controller - i tested a ps5 controller but i dont have a xbox, but it has some tollerance so it should fit fine - in case it does not, i made the module from two parts , so the stand can be exchanged - please let me know if that is the case</li><li>updated profile REQUESTS - added plate 11 -one new mod  for DRAWER MAX. user @Nerraw asked for a method of separating the drawer into smaller spaces - i made a very simple method of doing that - 4 interconnectible separators that can also be printed individually or by neccesity i guess</li><li>updated profile REQUESTS - added plate 12 -one new module User @zach13 asked for a method of organizing documents vertically so this is my take on it. The iddea was to make it sturdy because it is a little tall and not to waste too much material - it is made from 3 pieces - a base plate and to organizing stands that fit slightly different from each other so that the papers will stay a little cuved to maintain vertical position</li></ul>&nbsp;UPDATE 6 - 15.02.2024<ul><li>updated profile REQUESTS - added plate 7  - Reinforced top plate for the DM. @bosho.liviu requested a top plate so modules could be placed on top - Now you can do that, it is symetric and compatible in every direction</li><li>updated profile REQUESTS - added plate 8,9  - Two new modules . @bdwilson asked for two modules that have removable interior trays - plate 8 has a new 1space tray module and plate 9 has a new tilted marker combo with one large tray on the bottom. The front part of the removable tray is also slanted for easy removal</li></ul>&nbsp;UPDATE 5 - 11.02.2024<ul><li>updated profile REQUESTS - added plate 5  - Tough Plate for the DM. @Heimwerkerbienchen requested a tougher top plate so monitor could pe placed on top of the DrawerMax - has all the toughness required bells and whistles but i really cant guarantee how it will hold up in time - in my oppinion the entire assembly should be printed in a tougher filament, because altough the new plate has a support structure, the drawer modules themselfs are pretty thin so the weight of the monitor will be on the walls</li><li>updated profile REQUESTS - added plate 6  - Half Bow ties. @bdwilson had a very good ideea to close the holes on exterior modules so introducing half bow ties </li></ul>&nbsp;UPDATE 4 - 28.01.2024<ul><li>updated profile REQUESTS - added plate 4  - Steps + Tape dispenser combo unit. altough it was not a request, the plate has the name of the user that gave me the ideea - thank you for that @lilrepete</li><li>the new module is compatible with existing ACCENTS, plus the security wheel and the blade can be printed in other colours to keep things fresh</li><li>the blade slides into the module and is interchangable in case teeth break or you just want another colour. if you feel it fits too tight just trim the seam of it and it will slide more easily</li></ul>UPDATE 3 - 23.01.2024<ul><li>updated the printing order to outer/inner - not a big issue but some had problems - now all is well</li></ul>UPDATE 2 - 22.01.2024<ul><li>added a new print profile called ACCENTS</li></ul>In keepign with the modularity theme and ultra customizability i aim to develop, i made some mix or match brims to add an extra touch of colour to your organizer. everything fits in place without glue or force and same as everything else it is easily changable in case you want to switch up your look and keep it fresh.photos attached in the profile so please check them out. i know the colours i actually printed are not the best but it was all the filament i have till i get my new shipment&nbsp;UPDATE 1 - 19.01.2024<ul><li>added a new print profile called DRAWER MAX</li></ul>it is a drawer module that occupies 4 slots, is stackable and also highly customizablethe first tray for it, as you can see in the pictures is for the spare parts that come with the BambuLab printer + some extras. Fits the parts for two printers.make sure you follow the instructions in its profile to get perfect fits everywhere<ul><li>added a new print profile called REQUESTS</li></ul>this profile contains the user requests for modules. each plate will have the users name on it. this is going to be the profile i will update regularly, based on requests.&nbsp;&nbsp;I’ve been wanting to do this project since I made the first desktop organiser.The problem I wanted to address was, what if in a month you want or need something else, more, or less space, something specific, more room for usb, cards, crayons, etc, how do you keep a new look with minimal to no effort?&nbsp;I’ve seen there have been many attempts to do this but none really took of, so I asked myself why? I think the main reason was lack of interest derived from lack of support. If newer modules aren’t created, interest goes down, and it becomes the same thing as a normal organiser.Of course we have the gridfinity system witch is great honestly and other similar to it, but they all rely on the same premise, a base to keep everything together, so if you are full, you need another base, but does the base you need right away exist? or are you going to be left with extra slots.&nbsp;Maybe I didnt do my research right, and there are other options, all I tried to do was to make something universal, easy to print, elegant, very customisable, and most of all, something that doesn’t depend on screws, magnets and on a base to keep it all tied. I printed 10 bowties In less than 20 minutes on standard, and hold together 7 modules (the ones I use) and you can lift and move them as a whole, without having them fall or break&nbsp;The bow tie joint isn’t my ideea, it’s been used in woodworking for centuries. It is a robust way of holding things together and works quite well here too, especially printed the way I arranged it on the plates . All the modules can be connected in whatever orientation you want, except the laptop stand, because it needs room on the small sides for the length of the laptop/tablet. But that is it - I kind of made that specifically for me, because I use it as an end piece that fits under my P1S (like my first organiser)&nbsp;I am starting with 12 modules and will make a new one every other week, based on suggestions I hope, because I dont think I have enough creativity. I will put out my own ideas because I do have more, but everyone has diferent needs so if you think you can get on board with the ideea I welcome all input, and I will try to make whatever you want. Remix culture is strongly encouraged.&nbsp;Modules in the 3mf:&nbsp;PLATE 1<ul><li>Usbcombo1 (11 usb sticks + 5 full size memory cards + tray for usb caps)</li><li>Phone combo (fits iphone 15 promax + airpods pro)</li><li>Post-its (two full size stacks of postits)</li><li>Steps (4 equal holders - superglue, ties, hex set, mini uv lamp)</li></ul>PLATE 2<ul><li>12 bow tie joints - enough for about anything</li></ul>&nbsp;PLATE 3<ul><li>Hex single - roomie organizer - can be further split with the splitters on plate 8</li></ul>&nbsp;PLATE 4<ul><li>Laptop wedge - macbook pro + ipad pro 12.9 + apple microfiber slot - made to be wedged under the x1 or p1</li><li>Laptop standard - - macbook pro + ipad pro 12.9 + apple microfiber slot + additional slot</li></ul>PLATE 5<ul><li>Tilted marker combo - 12 thick markers + pens and other + paperclip 3 + misc tray</li></ul>PLATE 6<ul><li>apple watch dock double - 2 apple watch charger pucks - like the original - cable management + full size post it tray</li></ul>PLATE 7<ul><li>Hex double - double the size of the single - can be further split with the splitters on plate 8</li></ul>PLATE 8<ul><li>5 split plates for the hex series</li></ul>PLATE 9<ul><li>apple watch dock single - 1 apple watch charger puck - like the original - cable management</li></ul>PLATE 10<ul><li>Usbcombo A - 6 usb sticks + 5 full size memory cards + tray</li></ul>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;

The Organizer

사무용품

Downhill_Solutions

<h2>Here is my Poop Pop Stop V2.1! (is also working on X1C now)</h2><h2>Update: 09.Jan.2024:</h2>- I got enough feedback to say it will now also work on X1C!- the front outer wall are now shorter and thinner, no more Z-Homing error- PTFE Cutting tool with fixing clamp for perfect hose length- Optimized tree-supports <figure class="image image_resized" style="width:63.37%;"><img src="https://makerworld.bblmw.com/makerworld/draft/436088/2024-01-09_72b3fa75e3ea.jpg"></figure>Notice:The Heatbed has play in the X and Y axes, you can see the GIF. If you have to less space between the Poop Pop Stop and the Heatbed, it can help to pull the bed carefully toward the front door to add some space.<figure class="image image_resized" style="width:46.71%;"><img src="https://makerworld.bblmw.com/makerworld/draft/436088/2024-01-09_382c00cd274ba.gif"></figure><h2>PTFE Cutting Tool:</h2><figure class="image image_resized" style="width:41.61%;"><img src="https://makerworld.bblmw.com/makerworld/draft/436088/2024-01-09_6556d0a830b0b.jpeg"></figure><figure class="image image_resized" style="width:47%;"><img src="https://makerworld.bblmw.com/makerworld/draft/436088/2024-01-09_6fdda886fc02.jpeg"></figure><figure class="image image_resized" style="width:41.35%;"><img src="https://makerworld.bblmw.com/makerworld/draft/436088/2024-01-09_bf1bfb070340b.jpeg"></figure><figure class="image image_resized" style="width:45.41%;"><img src="https://makerworld.bblmw.com/makerworld/draft/436088/2024-01-09_7bbc6f3b0570c.jpeg"></figure><h3>For the perfect fit and quality like mine, do only use my uploaded printing-profile and ABS filament!</h3> The Problem at my prints was, that the Poop was pulled out of the <a target="_blank" href="https://eu.store.bambulab.com/de/collections/accessories-for-p1-series/products/purge-chute" rel="nofollow noopener">Purge Chute</a> at every filament change:<figure class="image image_resized" style="width:611.234px;"><img src="https://makerworld.bblmw.com/makerworld/draft/436088/2023-12-21_a9b5c2be80bca.jpeg"></figure> The Solution is my Poop Pop Stop, it lets the nozzle change the filament without problems, and hold the filament waste back in the purge chute:<figure class="image image_resized" style="width:53%;"><img src="https://makerworld.bblmw.com/makerworld/draft/436088/2024-01-07_62ff672b725c2.jpg"></figure><h2>The new Version V2.0 is a complete new design of the <a target="_blank" href="https://makerworld.com/de/models/102462#profileId-109116" rel="nofollow noopener">old Version</a> and contins the following changes:</h2>- the bottom layer and the print position are complete new designed without the level change for better print and look.- the poop stop area is now designed with PTFE hoses (you need them seperatly - i used the bambulab spare tubes) against sticking with print filament on the Poop Pop Stop itself.- the poop stop area use now a U-Cut instead of the V-Cut version- the thin front bridge is now stabilized with a vertical wall on the outside of the purge chute.- i added some cutouts in the washing area for the nozzle- the hole at the washing area for the nozzle is now bigger&nbsp;&nbsp;<h2>I tested the new design with a few printing-cubes with arround 50 filament changes and out of different materials (PLA / PETG / ABS), there was no problems on every material at my P1S:</h2><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/436088/2024-01-07_f764cad86e401.gif"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/436088/2024-01-07_7542cf135e9a1.jpeg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/436088/2024-01-07_139fc6ebcdd46.jpeg"></figure><h2>IMPORTANT: This new Version needs some difficult work-steps:</h2>- remove the Support carefully with a knife untill you got a clean surface in this areas- slit the PTFE-hoses lengthwise (only no.2/3/4) , don't slit no.1!- press the tubes in the numbered order on the single part (no.2 you have to press it from the bottom side and turn it carefully onto the round bridge)-after the install of the hoses no.2-no.4, cut it off just to the surface of the component-Cut a radius on the end of the pipe no.1 as shown in the picture (make shure you got a Gap between the hoses arround 1-2mm, if not recut no.1 until the gap is big enough or bend it a little bit) Please do all the steps carfully and check your result for looking the same as my Poop Stop in the pictures!<figure class="image image_resized" style="width:51.96%;"><img src="https://makerworld.bblmw.com/makerworld/draft/436088/2024-01-07_241a0ab6f3704.jpeg"></figure><figure class="image image_resized" style="width:51.97%;"><img src="https://makerworld.bblmw.com/makerworld/draft/436088/2024-01-09_86dc94b441b87.jpeg"></figure><figure class="image image_resized" style="width:51.36%;"><img src="https://makerworld.bblmw.com/makerworld/draft/436088/2024-01-09_a9ab89056c62b.jpeg"></figure><figure class="image image_resized" style="width:51.46%;"><img src="https://makerworld.bblmw.com/makerworld/draft/436088/2024-01-07_484e5a68d15d7.jpeg"></figure><figure class="image image_resized" style="width:51.35%;"><img src="https://makerworld.bblmw.com/makerworld/draft/436088/2024-01-07_510df216c2b21.jpeg"></figure>&nbsp;<h2>Please give me feedback! :)</h2>

Poop Pop Stop V2.1 - for P1S / P1P / X1C (UPGRADE 09.01.2024)

X1CC

Tom Fullen - Switch

I know there are many of these of the Moon however, I wanted to create my own to learn how to make other planets and other potential spherical objects. This Moon globe seems to be more detailed to me and upon sharing a picture of my make to Reddit, a few people wanted me to share this so here it is! This has an 80mm opening on the base to set on a 10cm LED lighted puck. I purchased <a target="_blank" href="https://share.temu.com/qjOKfzsDJGA" rel="nofollow noopener">this one</a> for another project but it worked out great for this.&nbsp;<a href="https://makerworld.com/en/models/61976#profileId-64438" rel="nofollow">Check out my Mars Lamp for the BambuLab LED Light Kit here!</a>&nbsp;Print Settings:.20mm Layers6 Walls100% InfillNo Supports &nbsp;For information on the NASA SVS CGI Moon Elevation Maps I used visit https://svs.gsfc.nasa.gov/cgi-bin/details.cgi?aid=4720

SVS NASA Moon Globe

조명

wuguigui

<h2>Summary</h2>Updated 20230615 Someone said the "1.1 Part-Shell-Front" is too tight to insert into the body, so I modified it, you can try the new part now.Updated 20230605I separated the body into 2 parts, now it is available for small printers( print size less than 10X10X10cm)Also, I removed the nostril, because, in the early TV cartoon series, they don't have any nostrils on the face; The front shell and the front body parts have a snap groove now， which can help you to assemble them easily.But I kept the old version, you can download the new version parts with the title "1.1"Updated 20230530Sorry guys, someone has an issue when assembling the part"Part-Shell-Front" to the body, Then I found the part is wrong, and now I reupload the part"Part-Shell-Front", Please download it again.Teenage Mutant Ninja Turtles, the memorial of the Post-80s generation.I designed a model kit version of the four cute turtles, It imitated the frame structure of the model kits, can prevent edge warping during printing, and can also recall the fun of assembling the model kit. Most of the sprues adopt hidden designs.You can try to print it with no support, 0.1 mm layer height is recommended.Follow the "Assembly Instructions" to make it. Watch the video to get more information.You can get the fun from the assembling.Click "Like" if you like it, or <a target="_blank" href="https://paypal.me/wuguigui?country.x=C2&locale.x=zh_XC" rel="nofollow noopener">buy me a cup of coffee</a> thank you!<h2>Post-Printing</h2><figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=KjEl-mLZMsw"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/KjEl-mLZMsw" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Teenage Mutant Ninja Turtles 

피규어

Martin Kozak

Print parts in colors of your choice. Use different color to highlight letters.&nbsp;PLA 0.2 mm, 2 perimeters, 3 bottom/6 top layer, 10% gyroid infill. Parts are pre-oriented to bed. No supports.

Alphabet Snake

Jorge Rui

<h4>Important notice:</h4>This design is free for the benefit of the community, but If you like my designs and want to contribute, you can make a donation to <a target="_blank" href="https://www.buymeacoffee.com/designrepcom" rel="nofollow noopener">buymeacoffee </a>or <a target="_blank" href="https://www.paypal.com/donate/?business=BUM67EMDJRXSN&no_recurring=0&currency_code=EUR" rel="nofollow noopener">paypal, </a>that will be greatly appreciated.<h4>Introduction</h4>As stated on the summary, this works very well for the rattling sound coming from the chassis. I would also like to point out that this was not done randomly. I did a study and tried several drawings until I came to the solution that I show you here.<figure class="image image_resized" style="width:75%;"><img src="https://media.printables.com/media/prints/541201/rich_content/237fd92a-91a0-4253-ba85-118bc84698d9/screenshot-2023-08-01-124106.png#%7B%22uuid%22%3A%2227304c7f-82ee-44df-9b23-a66726841498%22%2C%22w%22%3A2217%2C%22h%22%3A888%7D"></figure>This representation shows that a load of 10N aprox 1kgf will result on a deformation of about 0.35mm, The imagem shows an amplification of the real displacement (better do understand)&nbsp;<h4>Instructions</h4>It is composed of 2 systems: a tensioning system for drive bays and a damping system for the feet's.you will find 2 kind of damping system for the feet's.<ul><li>Flex spring_soft - For NAS up to 4 bay;</li><li>Flex spring. STEP - For NAS with more than 4 bays.</li></ul>If, like me, I had a little double-sided adhesive foam, you can put some at the base of each foot. It won't do much about the noise, but it helps to keep your feet in place and in the installation of them.<figure class="media"><div data-oembed-url="https://youtu.be/FgUq4elrG4c"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/FgUq4elrG4c" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><h4>Conclusion </h4>Did this help?For me, absolutely, especially the combination of the two systems. Obviously I can hear the drivers spining and the reading head, that noise the drive would always make even if it was resting inside a cotton ball.<figure class="image"><img src="https://media.printables.com/media/prints/541201/rich_content/853eb383-5768-4b77-ac82-edfa5c50daaf/screenshot-2023-08-01-111606.png#%7B%22uuid%22%3A%22baf3fc45-6002-4e50-8bec-0d2efad9fd82%22%2C%22w%22%3A2020%2C%22h%22%3A1687%7D"></figure>

Synology NAS - Rattling noise suppression

컴퓨터

zemistr

With nozzle 0.4 mm you can set external perimeters to 0.99 mm and layer height up to 0.3 mm.With nozzle 0.6 mm you can set external perimeters to 0.99 mm and layer height up to 0.44 mm.

Trash bin (in vase mode)

생활

Extrutim

Over 90 000 downloads and over 20 000 likes speaks for itself, a very popular filament clip now for you, here!&nbsp;A simple filament clip which prevents the filament from unwinding reliably! I&#39;ve tested many filament clips in the past, but couldn&#39;t find one that I was 100% satisfied with. Out of this need I have designed this small clip!&nbsp;This is the easiest way to attach the clip: Hold the end of the filament between your thumb and index finger, and press down on the previous winding with your middle finger. This way you can loosen the previous winding a bit to make it easier to get underneath with the clip to attach it. Do it a few times and it will be done in a few seconds.&nbsp;Important: Make sure your filament is not over extruded. This can cause the clip to not work as well as it could. I recommend regular PLA, Silky PLA has a poorer layer adhesion which can cause the clip to break.&nbsp;<blockquote>Tip:  2.85mm filament? Just scale the clip in your slicer to 160%.</blockquote>The most important features in short:<ul><li>Only requires about 1g of filament and prints in about 7min.</li><li>Does not attach to the spool. This makes it compatible with any filament spool and they can still be stacked easily.</li><li>Has a grip for easier handling.</li><li>A &#34;scoop&#34; to get under the previous winding better.</li><li>Bends the filament just slightly and therefore doesn&#39;t damage it.</li><li>A separate version with a hole in the grip to hang it up.</li></ul>The different clips explained separately:&nbsp;The classic: Unchanged because the vast majority are perfectly satisfied with this clip.The stronger clip: If you use Silky PLA or another filament with poorer layer adhesion, this scoop will be more sturdy.The clip for beasty filament: Filaments like PC are very slippery and stiff at the same time. The previous turn is clamped much stronger and prevents slipping.The closed clips: If the filament is fed into a Bowden tube these clips can stay on the filament. The hole is shaped so that the filament when it is straight simply slips through, if it is wound on the spool it holds the filament by its bending. There are these two versions, depending on which one you like better in handling.&nbsp;Remix? Please remember to select the same license as from this model when remixing.&nbsp;You can find <a target="_blank" href="https://www.printables.com/model/24371-grandmas-favorite-filament-clip" rel="nofollow noopener">the original upload here</a>, of course I would be very happy about a like and a follow there!<blockquote>Commercial use: Even if the license forbids this I agree if you show this model to your audience in a video etc. or use it if you run a business. Only selling the files or the physical model is prohibited. Please remember to name me as the author and link to this page.</blockquote>

Grandma's Favorite Filament Clip

3D 프린터

Whopper Printing

This design prints with NO support material and requires NO assembly. Print with the cab side DOWN. This is a great model to test your overhangs and tolerances. The tolerances are 0.3 mm.Be sure to download <a target="_blank" href="https://makerworld.com/en/models/13070?profileId=13070" rel="nofollow noopener">the excavator</a> that goes with it!&nbsp;If you would like to support me, consider these options:&nbsp;Social Links:<ul><li><a target="_blank" href="https://whopperprinting.com/" rel="nofollow noopener">WhopperPrinting.com</a></li><li><a target="_blank" href="https://patreon.com/whopperprinting" rel="nofollow noopener">Patreon</a></li><li><a target="_blank" href="https://whopperprinting.Etsy.com" rel="nofollow noopener">Etsy</a></li><li><a target="_blank" href="https://instagram.com/whopperprinting" rel="nofollow noopener">Instagram</a></li><li><a target="_blank" href="https://discord.gg/UfyQhUfn4N" rel="nofollow noopener">Discord</a></li><li><a target="_blank" href="https://www.tiktok.com/@whopperprinting" rel="nofollow noopener">TikTok</a></li></ul>

도구

자동차

DIY

AMS

사무용품

X1CC

조명

피규어

Jun

컴퓨터

생활

3D 프린터

장난감