K.Andreas1985

Toprototyp

Tips for printing this model: - orientation: all uploaded files are in the correct orientation, - scale: scale the model as desired, - temperatures: depending on the material used and the manufacturer's guidelines, - layer height: 0.2mm or less, - number of outlines: use 3 outlines with random seam to produce a watertight model, - infill: 15% or greater, - brim: not required, - supports: not required,

WATERING CAN

Chill

Ken Mills

2D art display for a PlayStation 4 controller patent drawing. Note that this is actually from a PS5 controller patent that shows styling closely or identical to that of the PS4 controller. I've renamed it to reduce confusion ;)&nbsp;Use a color swap for the line work to add contrast or simply color the lines with a marker or paint pen (I find a Sharpie works well).&nbsp;The frame that allows the picture to hang on a wall or stand on a desk / shelf. Just snap the picture in.&nbsp;Important:<ul><li>Be sure to allow the print to fully cool before removing from the build plate to avoid warping it while still warm.</li><li>If you are having trouble printing thin lines or the slicer preview, make sure the Arachne wall generator is enabled.</li></ul>Before printing the included frame, check out my new lightbox option: <a target="_blank" href="https://makerworld.com/en/models/145904" rel="nofollow noopener">https://makerworld.com/en/models/145904</a>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/145904" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/457755/2024-01-27_34196d0c3075.jpg"></a>&nbsp;Check out my other patent art here: <a target="_blank" href="https://makerworld.com/en/u/3703368285/collections/18978" rel="nofollow noopener">https://makerworld.com/en/u/3703368285/collections/18978</a>&nbsp;<a target="_blank" href="https://makerworld.com/en/u/3703368285/collections/18978" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/457755/2024-01-27_1295b19d277ea.webp"></a>

PS4 Controller Patent Art

Patent  Art

uhltimate

Endless 3D-Printed Calendar - Day & Weekday Display&nbsp;Update 09.01.2025 - Added Some Languages&nbsp;Description:Introducing the Rotating Endless Calendar - a 3D-printable marvel that combines both form and function in a timeless design. Say goodbye to flipping through pages of traditional calendars, for this innovative creation allows you to effortlessly keep track of the day and weekday with a simple twist.&nbsp;<figure class="media"><div data-oembed-url="https://youtu.be/Ta8FyG5fRpI"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/Ta8FyG5fRpI" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;Here is an image illustrating the assembly process. The Holder, which is the final component, serves not only as a stand but also secures everything in position. Two of these are required. The design is sleek and does not require screws. Additionally, you will need a 1.75mm filament piece that is 20-25mm long.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/402151/2023-12-30_8f1e8a2cab8938.png"></figure>

Rotating Endless Calendar - Never Miss a Day

sonstiges

Raulito3d

This is just a simple wall lamp with the brand logo of the printers that we love so much, and give a touch of glamor to the office.&nbsp;Just print, the lamp and the bottom, add a led stripe and enjoy.&nbsp;Greetings.

Bambu Lab Style Wall Lamp

mcgybeer

Cali-Dragon!Is your printer able to produce quality prints? When printing organic models you don't really care about precision and tolerances, you want them to look pretty. This small print allows you to test:<ul><li>Surface smoothness (aka layer consistency)</li><li>Stringing</li><li>Small perimeters</li><li>Overhangs</li><li>Ghosting</li><li>Details</li><li>Multicolor</li></ul>If printed in multiple colors, I encourage you to print several at the same time. Build a Cali-Dragon army!

Cali-Dragon

Kalibrierung

Bambu Lab

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000014265/design/2023-09-19_8d08d601f168.png"></figure>Let&#39;s start a marble race with friends! This marble run features a series of elements including elevator, starting line, randomized dividers, elevated track, large funnel, spiral, and loop section. It allows competition of multiple marbles, with each segment introducing an element of unpredictability. The excitement continues all the way to the end!&nbsp;Recommended filaments: Bambu PLA series, PLA Basic is recomended for more smooth track<a target="_blank" href="https://store.bambulab.com/collections/bambu-lab-3d-printer-filament?gf_60645=279355719795" rel="nofollow noopener">https://store.bambulab.com/collections/bambu-lab-3d-printer-filament</a>Hardware Kit: Marble Run Components Kit-003<a target="_blank" href="http://store.bambulab.com/products/marble-run-components-kit-003" rel="nofollow noopener">http://store.bambulab.com/products/marble-run-components-kit-003</a>&nbsp;Please make sure you clean the build plate before printing and/or applying glue to prevent print failures.&nbsp;Follow the video tutorial step by step to print and assemble your build. <figure class="media"><div data-oembed-url="https://youtu.be/8_Su9jdzgNA"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/8_Su9jdzgNA" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Marble Run 003

Bambu Kits

MakerWorld

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/281253/2023-09-20_ca373507d148d.png"></figure>This 3D printed version of the tank strives to replicate the authentic details in terms of appearance, including intricate undercarriage details. It features a rotatable and elevating turret, three accessible hatches, rotating wheels and tracks, as well as a suspension system with articulated movement. Through careful disassembly, arrangement of components, and the addition of auxiliary structures, all parts can be printed without the need for supports. Furthermore, the openable chassis design preserves the potential for future internal structural DIY work.&nbsp;Parts count: 157Estimated build time: 1hTools: CA Glue-medium, hand drill, pen knife, sand paper&nbsp;More Details version print profileRecommended filaments:Bambu PLA Matte Desert Tan (11401)<a target="_blank" href="https://store.bambulab.com/products/pla-matte-filament?variant=41159118717043" rel="nofollow noopener">https://store.bambulab.com/products/pla-matte-filament?variant=41159118717043</a>&nbsp;Bmabu PLA Matte Latte Brown(11800)<a target="_blank" href="https://store.bambulab.com/products/pla-matte-filament?variant=40904271954035" rel="nofollow noopener">https://store.bambulab.com/products/pla-matte-filament?variant=40904271954035</a>&nbsp;Bambu PLA-CF Lava Gray(14101)<a target="_blank" href="https://store.bambulab.com/products/pla-cf?variant=40828231581811" rel="nofollow noopener">https://store.bambulab.com/products/pla-cf?variant=40828231581811</a>&nbsp;Hotend: 0.2mm Stainless Steel & 0.4mm Hardened SteelPrint time: 50.8h&nbsp;&nbsp;&nbsp;Time Saving version print profileRecommended filaments:Bambu PLA Matte Desert Tan (11401)<a target="_blank" href="https://store.bambulab.com/products/pla-matte-filament?variant=41159118717043" rel="nofollow noopener">https://store.bambulab.com/products/pla-matte-filament?variant=41159118717043</a>&nbsp;Bambu PLA Matte Latte Brown(11800)<a target="_blank" href="https://store.bambulab.com/products/pla-matte-filament?variant=40904271954035" rel="nofollow noopener">https://store.bambulab.com/products/pla-matte-filament?variant=40904271954035</a>&nbsp;Bambu PLA-CF Lava Gray(14101)<a target="_blank" href="https://store.bambulab.com/products/pla-cf?variant=40828231581811" rel="nofollow noopener">https://store.bambulab.com/products/pla-cf?variant=40828231581811</a>&nbsp;Hotend: 0.4mm Hardened SteelPrint time: 13.9h&nbsp;Please make sure you clean the build plate before printing and/or applying glue to prevent print failures when printing small parts&nbsp;Follow the Assembly Guide below step by step to print and assemble your build. Refer to the Design Guide for further design and quality enhancement.

Panzerkampfwagen IV Tank

Modele

Markus710

Use the template to cut the photo if you want to put the photo in the frame.

LOVE

deko

3D design shop

high resolution batman bust

Batman bust

Büsten und Figuren

DeepSouth3DPrints

Grinchmas Lights Door Corner!UPDATE:(Per request I've uploaded two more print profiles for the model to be printed Face Down on the build plate which will give the model a clean textured look when using the gold pei plate!)&nbsp;&nbsp;I uploaded both the right and left print profile versions.Please give it a like! It helps getting noticed forothers to enjoy. Thanks andMerry Christmas!&nbsp;You can find my other Christmas decorations <a target="_blank" href="https://makerworld.com/en/u/1201824007/collections/122929" rel="nofollow noopener">here</a>&nbsp;&nbsp;

Grinchmas Lights Door Corner

weihnachten 

DesignCraft

DISCLAIMERS:<ul><li>Print profiles NOT created by DesignCraft may contain outdated model versions or suboptimal slicer settings. Use at your own risk! I have no control to moderate or remove these third party print profiles.</li><li>This model may not fit all ESUN cardboard spools. Please review the photos and spool measurements before printing.</li></ul>Description:&nbsp;This adapter system wraps the edges of an ESUN 1kg 199x62mm cardboard spool in order to:<ul><li>provide smooth rotation within a Bambu Lab AMS</li><li>prevent carboard debris from depositing within a Bambu Lab AMS</li></ul>Features:<ul><li>Reusable</li><li>ESUN nameplate for easy identification when reusing</li></ul>Instructions:<ul><li>Measure your spool first to ensure it matches the specified dimensions</li><li>Print this model twice for a single spool</li><li>Affix one spool ring adapter on each side of the ESUN spool</li><li>See attached photos</li></ul>Considerations:<ul><li>Print Material: Please print with a basic PLA or PETG to minimize any shrinkage.</li><li>Too Tight? Too Loose? Cardboard expands with humidity and contracts when dried. A cardboard spool that has absorbed too much moisture may cause the adapters to fit very tight. Placing the spool in a filament dryer, such as the SUNLU S2, for a bit should resolve this. Note, you should not dry the spool with the adapters attached as they can warp in the heat. Keep in mind that after a long drying session the adapters may fit too loose. This should resolve itself shortly as the cardboard reabsorbs some moisture from the air.</li><li>AMS Lid Doesn't Close? All of the spool adapters I make are less than the official AMS spool clearance limit of 202mm, as specified on the official AMS product page, and as tested within my own AMS. However, some people have stated their spools are rubbing against the lid with the adapters attached. It's hard to say what's causing this since I cannot reproduce the issue myself, however, I've created an <a target="_blank" href="https://makerworld.com/en/models/33133" rel="nofollow noopener">AMS Lid Riser</a> which allows you to keep your AMS lid closed while providing additional clearance for larger filament spools. It's a quick and easy print which you can find on <a target="_blank" href="https://makerworld.com/en/u/243407759" rel="nofollow noopener">my profile</a> or directly here: <a target="_blank" href="https://makerworld.com/en/models/33133" rel="nofollow noopener">https://makerworld.com/en/models/33133</a></li></ul>

ESUN Bambu Lab AMS Cardboard Spool Adapter Ring

Spullen Adapter

GamingFaxe

NOTE: You need to Print - Both 3MF from me! (4 Parts) Hey :) I remixed the “<a target="_blank" href="https://www.printables.com/model/361348-bambu-labs-carbon-x1-top-glass-riser-for-leds%20for%20easy%20printing" rel="nofollow noopener">Bambu Labs Carbon X1 Top Glass Riser for LED&#39;s</a>”Now you can print it without TPU and it works better, we made some updates to the file!1. 2x 3h printing time - 2 parts fit on the X1C. 2. no TPU needed anymore because we put the part together as one part. We now use 20x2mm EPDM tape as a base for the glass! This seals better, makes no noise and saves us the unnecessary TPU print! 3. we have adjusted the socket a bit so that we can better route the cable to the outside.To the parts list. 1. approx. 130cm 8mm COB Led strip 2. one power supply depending on what LED strip you bought (12/24V) 3. a dimmer if you want, we use an <a target="_blank" href="https://www.ebay.de/itm/254733020839?var=554520088749" rel="nofollow noopener">Alexa compatible dimmer</a>. 4. cyanoacrylate glue 5. 20x2mm EPDM (foam rubber) tapefor printing:You print everything from PLA, PETG, ABS in your Bambu Lab with a 0.2 er layer height and normal support (no tree structure please) Check the pictures to see how it should look. Always 2 parts just fit on the plate. Approx. 6h printing time for all 4 parts. (2x 3h)Assembly:We use the following &#34;<a target="_blank" href="https://www.ebay.de/itm/254995985456?var=554914076553" rel="nofollow noopener">COB LED strips</a>&#34; in addition a &#34;<a target="_blank" href="https://www.ebay.de/itm/303838576597" rel="nofollow noopener">24V 1A power supply</a>&#34; and the following &#34;<a target="_blank" href="https://www.ebay.de/itm/173065424528?var=471818882009" rel="nofollow noopener">EPDM tape</a>&#34; in 20x2mm. After printing, you clean up the parts roughly and just click them together, then you make a test whether it fits in the printer, it should lie flat in the printer without wobbling! If it does not fit, check your print for any warping....After everything fits, you now glue the EPDM tape in the upper edge, this normally requires no superglue (grease-free).Then you cut the appropriate lengths for your LED tape, this depends a bit on the divisibility of the strips.Now solder all 4 strips correctly at +/- together. Leave the cables between the LED strips about 3cm long.After soldering, insert the LED strips into the intended lip, this should work with an 8mm strip without any problems, we had self-adhesive LED strips, but we still secured it at each divisible point from above with a drop of superglue.Then let everything dry or use Activator Spray. Now you put the frame in the printer, the glass pane on top and then if necessary your AMS back on top. We deliberately built it so that we don&#39;t have to/want to do any wiring on the printer itself.If you want to do this, of course, it is up to you. We assume anyway in no way a liability, no liability for material defects or otherwise!Despite the disclaimer, we hope you have fun building! See you in the Makes!Nick from <a target="_blank" href="https://discord.gg/bEjqY8DEPb" rel="nofollow noopener">Filament Freunde - Discord</a> :) GERMAN: Hinweis: Ihr müsst beide 3MF´s von mir Drucken! (4 Teile insgesamt)&nbsp;Hey :) Ich habe es geremixed. Jetzt kannst du es ohne TPU drucken und es funktioniert besser, wir haben einige Updates an der Datei vorgenommen!1. 2x 3h Druckzeit - es passen 2 Teile auf den X1C 2. Kein TPU mehr nötig da wir das Teil als ein Bauteil zusammengefügt haben. Wir nehmen nun 20x2mm EPDM Band als Unterlage für das Glas! Das dichtet besser, gibt keine Geräusche von sich und erspart uns den unnötigen TPU Druck! 3. Wir haben die Buchse ein bisschen angepasst sodass wir das Kabel besser nach außen verlegen können.Zur Stückliste. 1. ca. 130cm 8mm COB Led Streifen 2. ein Netzteil jeh nachdem was du für einen LED Streifen gekauft hast (12/24V) 3. einen Dimmer wenn du möchtest, wir nutzen ein <a target="_blank" href="https://www.ebay.de/itm/254733020839?var=554520088749" rel="nofollow noopener">Alexa kompatiblen Dimmer</a>. 4. Sekundenkleber 5. 20x2mm EPDM (Moosgummi) Bandzum Druck:Du druckst alles aus PLA, PETG, ABS in deinem Bambu Lab mit einer 0,2 er Schichthöhe und normalen Support (bitte keine Baumstruktur) Schau in den Bildern nach, wie es aussehen sollte. Es passen immer 2 Teile gerade so auf die Platte. Ca. 6h Druckzeit für alle 4 Teile. (2x 3h)Zusammenbau:Wir nutzen folgende &#34;<a target="_blank" href="https://www.ebay.de/itm/254995985456?var=554914076553" rel="nofollow noopener">COB LED Streifen</a>&#34; dazu ein &#34;<a target="_blank" href="https://www.ebay.de/itm/303838576597" rel="nofollow noopener">24V 1A Netzteil</a>&#34; und folgendes &#34;<a target="_blank" href="https://www.ebay.de/itm/173065424528?var=471818882009" rel="nofollow noopener">EPDM Band</a>&#34; in 20x2mm. Nachdem druck bereinigst du die Teile grob und klickst sie einfach nur zusammen, dann machst du eine Probe ob sie in den Drucker passt, es sollte Plan im Drucker aufliegen ohne zu wackeln! Sollte dies nicht passen, überprüfe dein Druck auf eventuelles Warping...Nachdem alles passt, klebst du nun in den oberen Rand das EPDM Band, dies benötigt im Normalfall kein Sekundenkleber (Fettfrei)Dann schneidest du dir die passenden längen für dein LED Band zurecht, dies hängt ein bisschen von der Teilbarkeit der Streifen ab.Löte nun alle 4 Streifen korrekt an +/- zusammen. Lasse die Kabel zwischen den LED Streifen ca. 3cm lang.Nachdem Löten bringst du die LED Streifen in die vorgesehene Lippe ein, dies sollte mit einem 8mm Streifen problemlos gehen, wir hatten zwar selbstklebende LED Streifen, haben diesen aber trotzdem an jeder teilbaren Stelle noch einmal von oben mit einem tropfen Sekundenkleber gesichert.Danach lässt du alles trocknen oder benutzt Activator Spray. Jetzt setzt du den Rahmen in den Drucker, die Glasscheibe oben drauf und dann ggf. deine AMS wieder oben drauf. Wir haben es bewusst so gebaut, das wir keine Verkabelung am Drucker selbst durchführen müssen/wollen.Wenn du dies natürlich möchtest, steht es dir Frei. Wir übernehmen sowieso in keinster weise eine Haftung, keine Sachmangelhaftung oder Sonstiges!Trotz des Disclaimers wünschen wir dir viel Spaß beim Bau! Wir sehen uns in den Makes!Nick vom <a target="_blank" href="https://discord.gg/bEjqY8DEPb" rel="nofollow noopener">Filament Freunde - Discord</a> :)

Bambu Lab X1C Top Glass Riser

Bambu tool

headphone & headset holder / stand / headset holder / hanger&nbsp;The bottom is hollow, if you want to put something heavy in there like sand.

headphone holder / headphone stand / headset holder / hanger

office

RobDrivesCars

It's just a tray™ … or is it?Well, it is, but it's a small tray for small parts. Specifically, I designed these for screws when I'm working on fulfilling orders that require I sort specific length screws and count the quantity, but this could be useful for anyone doing any sort of small electronic disassembly!This is StackBox v2. It has several big upgrades over v1:<ul><li>No supports needed, ever.<ul><li>The bottom of the tray has flared. This allows for the ez-stack system do its job using simple bridging</li></ul></li><li>The spout has been redesigned<ul><li>It's now on an angle, meaning screws are less likely to spill out</li><li>The </li></ul></li></ul><figure class="image image_resized" style="width:63.34%;"><img src="https://makerworld.bblmw.com/makerworld/user/171771437/draft/2023-09-19_5lqjwej5c6id.gif"></figure>The base of the tray has a divided interior which allows you to sort two or more different types of items (like two sizes of screws) on either side. I also added ridges to catch small features like the lip of the screw head so it makes for easy sorting/counting.<figure class="image image_resized" style="width:39.77%;"><img src="https://makerworld.bblmw.com/makerworld/user/171771437/draft/2023-09-19_xrseczvlcuch.jpg"></figure>I also added a small funnel at the corner of the tray. This “spout” will just fit into a 2x3-inch (50x75mm-ish) bag in case you need to store those sorted items for whatever reason. There is a small lip right before the spout to prevent loose screws from just falling out of the spout.<figure class="image image_resized" style="width:39.3%;"><img src="https://makerworld.bblmw.com/makerworld/user/171771437/draft/2023-09-19_da87h1awsd5l.jpg"></figure>On, and did I mention they can stack? Because they can. It's kind of the whole point and it makes storing multiple kinds of screws or small parts for a single project super simple.There's also a small friction-fit lid in case you want to keep those parts free from the eyes of wandering cats.This print has been simplified to just three files:<ol><li>Small Tray: 10mm high walls</li><li>Medium Tray: 25mm high walls</li><li>Lid: It's a lid, kind of! There is no securing other than friction-fit (which depends on your printer tolerances). This is more to prevent bumps and spills.</li></ol>----The original v1 of this model (which is retired and will no longer be updated) <a href="https://www.printables.com/model/493058/" rel="nofollow">can be found here</a>.