Justin_246416725

c4444

This is a attachment for ASPIRE brand walking frames which allows the user to mount a separate walking stick to the walking frame. Uses a M5 x 20 bolt into the hole used by the existing handle screw.

Walking Stick Holder attachment for ASPIRE walking frames

Hospital 

marcopolo

simple y-connector without hose adapter. the hose is held by threads. enjoy!&nbsp;update 2024-01-19:i have changed the thread on one side to a left-hand thread. this means that the hoses do not have to be rotated during installation. it works best if the hoses are screwed in on both sides at the same time.

Simple Y-Adapter AMS with threads inside (no tube-adapters needed)

Printer

theJJM

Imported from Thingiverse I am not the original author. I will make a profile for it to be printable via the phone app. 12/7/2023: Updated a print profile to have only supports on the build plate. Imported the <a target="_blank" href="https://makerworld.com/en/models/86354#profileId-92262" rel="nofollow noopener">Ocarina Stand</a>.

Updated 12 Hole Ocarina

Music 

Valeria Momo

My BambuStudio AMS ready print profile is loaded in the "Raw Model File" section. If you print the profile I would be happy if you will upload it as a new print profile.&nbsp;Dimensions: 25*20*3 cmBest gift for IT technicians, IT Help Desk and maintenance technicians of all types.Opening a support ticket is essential to receive them :-)Yes, even if you just have to ask for a new mouse... have you opened the ticket?The lightbox has 2 holes at the back for hanging on the wall. I suggest using 5v led.  <h3>Lightbox Desk Stand</h3>If you want to hang the lightbox on your desk or shelf, try my <a target="_blank" href="https://makerworld.com/en/models/149905#profileId-163553" rel="nofollow noopener">Lightbox Desk Stand</a>.<figure class="image image_resized" style="width:25.96%;"><img src="https://makerworld.bblmw.com/makerworld/draft/479445/2024-01-21_610e23f2afe3a.gif"></figure><h3>Commercial license</h3>Do you want to sell prints of this model? You can purchase commercial licensing for this model<a target="_blank" href="https://patreon.com/ValeriaMomo?utm_medium=clipboard_copy&utm_source=copyLink&utm_campaign=creatorshare_creator&utm_content=join_link" rel="nofollow noopener"> by joining the Commercial License in my Patreon</a>.&nbsp;

"Did you open a ticket?" IT QUOTE Lightbox

michelem

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000139309/design/2024-04-23_b4afa61493a71.png"></figure>A VERSATILE EVERYDAY COMPANION&nbsp;Imagine having a versatile tool that effortlessly fits into your pocket, ready to tackle an array of tasks.&nbsp;Meet the SmartBits – a compact marvel that seamlessly combines multiple functions in a sleek design.&nbsp;This tool serves as both a screwdriver and a bit holder, providing easy access to 8 different bits for various applications.&nbsp;Activating the tool is a breeze – a simple slide on the exposed bar causes the bits to extend from the opposite end. The magnet effortlessly guides them back into position. Never forget it open.&nbsp;Thanks to the additional embedded magnets, each bit is securely held in place, ensuring they remain steadfast whether you&#39;re on the move or storing the SmartBits in your pocket.&nbsp;It&#39;s the ideal companion for your everyday needs, effortlessly blending convenience and functionality.&nbsp;Print Instructions:&nbsp;Support is required for both the Base and the Slider. Please verify the 3mf file with Bambu Studio if there&#39;s any uncertainty.&nbsp;Place the Slider with the magnet holes on the build plate and add regular support.&nbsp;Position the Base with the side opening on the build plate and add regular support.&nbsp;There is an alternative version of the base with flat bottom you can print with it on the build plate, but it requires support too.&nbsp;No support is needed for the Button and Lid.&nbsp;I recommend printing everything with a minimum resolution of 0.16mm.&nbsp;Bill of Materials (BOM):&nbsp;You&#39;ll need some magnets and a few screws:<ul><li>12 magnets, 5 or 6mm x 2mm</li><li>4 screws, M3 Socket Head, 8mm</li></ul>Assembly Instructions:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000139309/design/2024-01-15_7862deb2dfe4.png"></figure>Start with the base and insert 2 magnets into the two rectangular holes; no glue is required there.&nbsp;Next, with a bit of glue, add 1 magnet to the Base in the slider housing. Be cautious, as this magnet is the only one that needs attention to its side, opposite to the one you put in the center hole of the slider (to be attracted).&nbsp;Now, take the Slider and glue 9 magnets on the bottom holes; again, the center one must have the same side as the magnet you put in the base slider housing.&nbsp;Insert the slider into the base, add the lid, and tighten the lid screws.&nbsp;Finally, attach the button to the slider with the last screw.&nbsp;If the slider doesn&#39;t return to its position, slightly loosen the screws.&nbsp;If you want I added also a cord endcap to be printed, look at the pictures, insert the paracord or similar in the bottom hole of the Endcap_Base make one simple knot on both ends, finally close it with the Endcap_Lid.&nbsp;Also, take a look at the <a target="_blank" href="https://makerworld.com/en/models/134027" rel="nofollow noopener">Magnetic Pocket Screwdriver</a> I crafted.&nbsp;Hope you like it!&nbsp;(Got inspired by the Bit Bar by Big Design)&nbsp;Check out my other magnetic tools for your office:&nbsp;<figure class="table" style="width: 94.97%"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td style="text-align: center"><figure class="image image_resized" style="width: 49.2%"><a href="https://makerworld.com/en/models/146614" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000139309/design/2024-01-23_b0f041b578fc2.png"></a></figure></td><td style="text-align: center"><figure class="image image_resized" style="width: 50.26%"><a href="https://makerworld.com/en/models/143760" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000139309/design/2024-01-23_bf112a67f1d5b.png"></a></figure></td></tr></tbody></table></figure><ul><li><a target="_blank" href="https://makerworld.com/en/models/146614" rel="nofollow noopener">The magnetic cable clips</a></li><li><a target="_blank" href="https://makerworld.com/en/models/143760" rel="nofollow noopener">The magnetic ScrewGuard</a></li></ul>

SmartBits - Magnetic screwdriver bits holder

Tools

Brent Peterson

<h2>Toroidal Launcher</h2>This is an original design created for the <a target="_blank" href="https://makerworld.com/en/contests/5" rel="nofollow noopener">Flying Objects design contest</a> and features a handheld three-stage planetary gearbox that launches a toroidal ring over 3000 RPM! The design is 100% 3D printed; all pieces press fit together and no additional hardware is required.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/360322/2023-12-15_92eaaa9691a14.gif"></figure>The gearbox used in this design is modular and will be released as it's own series soon™, if you have any thoughts or feedback please share so I can continue to improve the design!<h3>Modifications and Add-on Designs</h3><ul><li>[NEW!] Remix Templates<ul><li><a target="_blank" href="https://makerworld.com/en/models/123219" rel="nofollow noopener">Threaded cap</a></li><li><a target="_blank" href="https://makerworld.com/en/models/125073" rel="nofollow noopener">Hexagon gear driver</a></li></ul></li><li>Gearbox modifications<ul><li><a target="_blank" href="https://makerworld.com/en/models/99992#profileId-106623" rel="nofollow noopener">High torque conversion kit (1:2 ratio)</a></li><li><a target="_blank" href="https://makerworld.com/en/models/105586" rel="nofollow noopener">1:3 ratio gearset</a></li><li><a target="_blank" href="https://makerworld.com/en/models/108803" rel="nofollow noopener">1:4 ratio gearset</a></li><li><a target="_blank" href="https://makerworld.com/en/models/105590" rel="nofollow noopener">1:5.5 ratio gearset</a></li><li><a target="_blank" href="https://makerworld.com/en/models/110188" rel="nofollow noopener">1:7 ratio gearset</a></li></ul></li><li>Toroidal ring designs<ul><li><a target="_blank" href="https://makerworld.com/en/models/102279" rel="nofollow noopener">Toroidal Launcher Mini Rings - 100mm pitch</a></li><li><a target="_blank" href="https://makerworld.com/en/models/97633" rel="nofollow noopener">Toroidal Launcher Mini Rings - 150mm pitch</a></li><li><a target="_blank" href="https://makerworld.com/en/models/102728" rel="nofollow noopener">Toroidal Launcher Mini Rings - 200mm pitch</a></li></ul></li></ul><h3>Specifications</h3><ul><li>Three stage planetary gearbox with 1:48 gear ratio (overdrive)<ul><li>0.75mm gear module for ultra-smooth performance (24/72 teeth)</li><li>10mm hex driver for connecting gear stages</li></ul></li><li>Toroidal ring design with four blades (1.2mm thick) available in three sizes<ul><li>100mm diameter, 150mm pitch</li><li>125mm diameter, 175mm pitch</li><li>150mm diameter, 200mm pitch</li></ul></li></ul><h3>Printing tips</h3><ul><li>All prints pictured were printed using Bambu Basic and Matte PLA</li><li>For best results run flow rate calibration and thoroughly clean build plate</li><li>The launcher gears are available in two print profiles with the following changes to the standard 0.20mm profile:<ul><li>Arachne wall generator</li><li>5x top and bottom walls, 25% infill</li><li>75 m/s inner and outer wall print speed</li></ul></li><li>The toroidal rings are available as a single print profile with the following changes to the standard 0.20mm profile:<ul><li>0.6mm line thickness, Arachne wall generator</li><li>75 m/s inner and outer wall print speed</li></ul></li><li>The launcher housing prints with the standard 0.20mm profile.</li></ul><h3>Launcher Parts</h3><ul><li>Launcher Gears<ul><li>SunGear24.step [3x]</li><li>PlanetGear24.step [9x]</li><li>PlanetCarrier24.step [3x]</li><li>RingGearDouble.step [1x]</li><li>RingGearLid.step [1x]</li><li>RingDriver.step [1x]</li><li>GearDriver.step [1x]</li></ul></li><li>Launcher Housing<ul><li>HousingBase.step [1x]</li><li>HousingRingLid.step [1x]</li><li>HousingCarrierHolder.step [1x]</li><li>HousingCarrierThreads.step [1x]</li></ul></li><li>Toroidal Rings<ul><li>ToroidalRing100.step [1x]</li><li>ToroidalRing125.step [1x]</li><li>ToroidalRing150.step [1x]</li><li>ToroidalRingDriver.step [1x]</li><li>ToroidalRingLauncher.step [1x]</li></ul></li></ul><h3>Launcher Assembly (Gears + Housing)</h3><ul><li>Assembly the planet carrier with three planet gears and one sun gear as shown below. Repeat for all three planet carrier assemblies.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/360322/2023-12-31_efae722ebe2db.gif"></figure><ul><li>Use the shorter hex drive to connect two sets of gears. Align both planet carriers and hold them with one hand while holding the double ring gear in the other hand and slowly turning as you close the gear; once closed insert the assembly into the main housing to hold secure. The gears should spin freely; if they don't remove the gear assembly and repeat this step.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/360322/2023-12-31_f1371c6d57ee6.gif"></figure><ul><li>Use the longer hex drive to connect the last set of gears and then assemble with the threaded cap as shown below.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/360322/2023-12-31_4926c45fbbf51.gif"></figure><ul><li>Carefully mesh the single ring gear with the planet gears taking note of the 2mm flat section that is positioned towards the main gear assembly as shown below. Use the same method of rotating while slowly closing and covering with the cap to hold secure.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/360322/2023-12-31_54c6fffceb4e5.gif"></figure><ul><li>Done! The assembly should spin smoothly with the output shaft making 48 rotations for every one turn of the input knob. Performance depends on printer tolerances and filament used; for best results use the include print profiles with Bambu Studio (supports many different printers). A bit of lubricant can also be added to the gears to improve performance.</li></ul><h3>Toroidal Ring Assembly</h3><ul><li>Insert the hex drive into the interlocking driver; the clearance is tight but it should be a snug fit.</li><li>Insert the assembled driver into the output sun gear, the fit should be the same.</li><li>If the driver does not stay secured when launching the ring a small amount of CA glue can be use.</li></ul><h3>Changes</h3><ul><li>v1<ul><li>Initial release; files now available in v1old folder</li></ul></li><li>v1.1<ul><li>Updated print profiles with improved settings for gears and rings</li><li>Improved single color print profile, fits on A1 mini and objects are laid out to allow skipping</li><li>Improved clearance of gears and overall meshing</li><li>Updated toroidal ring to use the same launcher as the mini rings<ul><li>Print profile includes 3 sizes (100mm, 125mm, 150mm)</li></ul></li><li>Updated assembly instructions to have fewer steps with a GIF for each one</li></ul></li><li>v1.1.01<ul><li>Added new section for template designs intended for remixing</li></ul></li></ul>

Toroidal Launcher - High RPM launcher featuring compact planetary gearbox

Sakul

Revolutionize your workspace with these Brick Stackable Desk Boxes – where playfulness meets productivity! 🧱✨ Unleash your creativity and tidy up your desk simultaneously with these 5:1 Brick brick-inspired organizers. Available in 2x2 and 2x4 sizes, each Box comes complete with a built-in drawer for seamless storage of your office essentials. These bricks are not only five times the size of regular clamping Bricks but are also stackable, just like the iconic building blocks.Mix and match to create your personalized desk masterpiece! Elevate your organizational game and bring a touch of childhood nostalgia to your workspace. The Brick Stackable Desk Boxes – because work can be both efficient and fun!  If you like my work and want to support me in creating more free original designs, I would very much appreciate it if you <a target="_blank" href="https://ko-fi.com/sakul" rel="nofollow noopener">“buy me a coffee”.</a>&nbsp;&nbsp;Check out my newest Uploads <figure class="table" style="width: 98.39%"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td><figure class="image"><a href="https://makerworld.com/en/models/484385#profileId-396742" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000139300/design/2024-06-04_fa3ccc46fa531.jpg"></a><figcaption>🍦Pop &amp; Catch Toys Ice Cream Cone🍦</figcaption></figure></td><td><figure class="image"><a href="https://makerworld.com/en/models/447981#profileId-354736" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000139300/design/2024-05-01_5c7d04a643a0d.jpg"></a><figcaption>🐷Minecraft Animal Farm Pack🐮</figcaption></figure></td></tr></tbody></table></figure>

Hospital

Printer

Music

Fun

Tools

Toy

Organisers