JupiCroco

Collecticraft

<h2>David Egg Cup: A Fusion of Classic Art and Breakfast Rituals</h2>Description: Embark on a journey through art and culinary delight with our latest creation: the David Egg Cup. Inspired by Michelangelo's iconic masterpiece, <a target="_blank" href="https://makerworld.com/en/models/168175#profileId-184617" rel="nofollow noopener">the David sculpture</a>, this unique egg cup brings a touch of Renaissance elegance to your breakfast table.<h3>Key Features:</h3>Iconic Design: The David Egg Cup beautifully captures the essence of Michelangelo's David, meticulously sculpted to replicate the timeless features of the original masterpiece.&nbsp;Functional Art: Elevate your breakfast experience with this functional piece of art. The egg cup's hollowed center provides the perfect nest for your morning egg, adding a touch of sophistication to your breakfast routine.&nbsp;Conversation Starter: Impress your guests with this conversation-worthy piece. Whether used for breakfast or displayed as a decorative accent, the David Egg Cup sparks discussion about the intersection of art and everyday life.&nbsp;Experience Art in Every Bite: Add a touch of Renaissance splendor to your breakfast ritual with the David Egg Cup. Let each morning egg be a celebration of artistry and culture.&nbsp;Join the Journey: Unlock access to the David Egg Cup and other exclusive designs by joining us on <a target="_blank" href="https://www.patreon.com/CollectiCraft" rel="nofollow noopener">Patreon</a>. Together, let's blend art and functionality to create unique pieces that inspire and delight. 🥚🎨

David Egg Cup: A Fusion of Classic Art and Breakfast Rituals

Italia 

Ciuf_Ciuf

<h2>General description</h2>After the great success of the drainage project, I am proposing a simpler and more intuitive version, especially for new users and beginners who are approaching the world of multicolor.&nbsp;<a target="_blank" href="https://makerworld.com/en/models/54909#profileId-56456" rel="nofollow noopener">https://makerworld.com/en/models/54909#profileId-56456</a>&nbsp;The basic purpose is always to minimize purging material as much as possible to save on color changes and drastically reduce the amount of discarded materialI have decided to update the model and make it more user-friendlyThe basic idea was to make it a standard Bambulab Calibration, similar to the K calibrationSo, lines with numbers to instantly identify which value is the most accurate to assign to the purging of the respective materialBeing a test, it must be as economical as possible, so a test strip requires only 2 grams&nbsp;I'm leaving you the video of a guy who explains in detail how to use this type of calibrationI thank him for considering my project for the creation of a video on YouTube, and I'm pleased that I've shared his video<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=FP3CwBX6A4I"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/FP3CwBX6A4I" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><h3> </h3><h3>Pre-print Procedure</h3>*Edit 03-01-2024*&nbsp;From one of the various print profiles you download, you'll need to set the color combination you desire<figure class="image image_resized" style="width:47.04%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2024-01-03_36c2f25737bbb.png"></figure>In my case, I'm calibrating these purge combinations, and the model will result like this<figure class="image image_resized" style="width:36.6%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2024-01-03_e5017ae8f46d08.png"></figure>If you want to change the color combination, simply use a different type of filament<figure class="image image_resized" style="width:37.2%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2024-01-03_a174ecda4566d.png"></figure>and the print profile will adapt to the combination you have set, as in this case<figure class="image image_resized" style="width:37.37%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2024-01-03_f1abfb2fe5f0a8.png"></figure>The model will update in real-time, allowing you to see immediately which color you are changingI've implemented additional print profiles to significantly streamline the procedure.While the process can be fast for those with a single AMS, it might be quite lengthy for those with multiple using the previous print profiles.With these new print profiles, there is also increased compatibility for the A1 Mini model.&nbsp;The idea of implementing the print profiles in this new way was suggested by Michael when he uploaded his print profile for the V1 model. I'll leave you the link to his Makerword channel (<a target="_blank" href="https://makerworld.com/en/u/2954682459" rel="nofollow noopener">https://makerworld.com/en/u/2954682459</a>)&nbsp;As on the previous model, it is necessary to reduce the purging material to allow us to calculate the material quantity adequately.The only significant difference is that this time we set all purging quantities to 0On the dual-object print profile, you can also do it manually.However, on the other print profiles, if you want to expedite the process, you can set the multiplier to 0, instantly reducing the purge to 0<figure class="image image_resized" style="width:35.51%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2023-12-29_f161c5ce7c0868.png"></figure>Now you can start the printing process&nbsp;Note: Do not touch any other parameters I've set, or the colors won't be printed in the correct order<h3>Calibration reading</h3>After completing the print, for calibrating the K factor, we need to read and determine the most accurate value to set as the purging quantityWhat you will find in front of you will be this<figure class="image image_resized" style="width:46.93%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2023-12-29_02e09355d1abf8.jpg"></figure>As you can see inside the two green rectangles, that is the exact moment when the material is purged, and the next color takes over.<figure class="image image_resized" style="width:46.78%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2023-12-29_617da72c674e78.jpg"></figure>At this point, all that's left is to identify the correct value and set the purging quantity for that specific color changeFor these tests, it's highlighted that 150mm^3 of material is required to perform the color change<figure class="image image_resized" style="width:46.33%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2023-12-29_e9817c7179a71.jpg"></figure>In this specific case, the quantity is identical for both color changes, but for other combinations, it may varyAs you can see, the difference between the default values of Bambustudio and the ones just found is significantly lower.This allows us to reduce material waste and significantly cut down on print times, decreasing the time the printer takes to change the filament<figure class="image image_resized" style="width:35.41%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2023-12-29_a67e103190684.png"><figcaption>BEFORE</figcaption></figure><figure class="image image_resized" style="width:35.53%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2023-12-29_ab83cab72d7d18.png"><figcaption>AFTER</figcaption></figure>&nbsp;

AMS Purge Calibration V2

filament purge

PrintMason23

Model by Makerbot - The T-Rex Skull.. Remix of T-Rex Skeleton by Makerbot&nbsp;Big Tyrannosaurus Rex Skull!Scaled up to 170%!As Big as X1/P1 Build Size Will support!.16 Layer Height..No Supports, 10% Gyroid Infill, 2 walls, 4 Top & Bottom Shell Layers&nbsp;**Change Log**&nbsp;02.01.2024   Added New Profile to alleviate Issue Some Users were having with skull failure on nose portion due to possible adhesion and/or speed issues<ul><li>Slowed Outer Wall & Inner Wall by 25% (150mm/s)</li><li>Slowed Sparse Infill, Internal Solid Infill, & Gap Infill by about 50% (150mm/s)</li><li>Slowed Acceleration for 1st Layer, Outer Wall, Top Surface & Sparce Infill down 50%</li><li>Also Added a 15mm Brim on Skull top for added build plate contact for better adhesion and print stability.</li></ul>**Working next on solving the lack of stand issue and making it easier to assemble.**Also Testing a New Version!&nbsp;I appreciate your feedback. Helps me to improve on things to make a better experience for you all. Definitely learning a few new things as I go so it will only get better!Your Downloads & Makes help to support more models and future creations to come.Please post Your Makes and Comments! I do my best to reply to everyone.I Love seeing how your Prints turn out!&nbsp;**Happy Making**

T-Rex Skull

dini

starfalk

A desiccant box with lid for the Sunlu Filamantdryer S4I printed this in ASA to prevent melting. I think PETG should work too.Printable without supports.Please let me know if you have any issues

Sunlu S4 Desiccant Box

Sunlu S4

traxendre

Hello there, I propose you this useful Broom stick holder that can be mounted on wall / Furniture&nbsp;This improve system avoid clip that can damage the support and do a satisfying Clic&nbsp;This model is for 22mm diameter Broom stick, Also give STL for 25mm,30mm,35mm same profil should work fine&nbsp;No support needed, can be print in PLA (will add my profil BBL Studio for strong part) or others your into.&nbsp;If you don't use the profile be sure to put a least 4 walls loops and 15% infill to be strong enough&nbsp;Usage : 1 - Print it 1bis - verify that the print is strong enough1ter - you can add EPDM tape inside the ring to smoth things up! very easy and removable2 - put it in a wall with adequate fixation in fonction of your wall3 - unclip the mechanism 4 - Clip you tubeEt Voila !&nbsp;you can print more and put it at different places for conviniences&nbsp;Will upload a model For Dyson Tube look at my profil!&nbsp;And yes i will do on for light Sabers ;)&nbsp;OG @fns720Don't hesitate to like and add to you collection then leave a review after your print it ;)&nbsp;

Mechanical Broom Holder No support 22mm

practical home parts

Engineering Projects

<h2>NOTICE: REMIX ARE NOT ALLOWED</h2><h2>NOTICE: DO NOT POST ANY OF YOUR PROFILE</h2>&nbsp;&nbsp;I design this a purge chute cover with a silicon nozzle wiper.&nbsp;Benefits:<ul><li>Purged filament doesn't jump on the plate</li><li>Nozzle is better cleaned</li><li>Pieces of purged filament don't go everywhere , each corner of the printer remains clean</li></ul>&nbsp;<h2>How to install THE MODELS WITH and WITHOUT THE LOGO:</h2><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/506441/2024-01-18_da9c61bb4c7ec8.webp"></figure>&nbsp;<h2>How it works:</h2><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/506441/2024-01-18_1478ee771ffeb.webp"></figure>&nbsp;<h3>INSTRUCTIONS</h3><h3>What is the nozzle wiper made of?</h3>It is made from a piece of silicone from the molds used to make pancakes. Like this one you see in this pic:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/506441/2024-01-08_c6bbefaa222f68.jpg"></figure><h2> </h2><h2>How big should the silicone piece to be cut be?</h2>10mm x 2mm x 15mm<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/506441/2024-01-08_11d23ec8214f98.jpg"></figure>&nbsp;<h2>PRINT THE POOP STOP WITH THE NOZZLE WIPER</h2>&nbsp;<h2>CUT THE PIECE:</h2><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/506441/2024-01-08_ac17a4c0705dd.jpg"></figure>&nbsp;&nbsp;<h2>APPLY THE SILICON PIECE IN THE SEAT OF THE POOP STOP AND INSTALL THE POOP STOP IN THE POOP BUCKET</h2>&nbsp;AS YOU SEE IN THIS PIC , MY MODEL IS SUPER FLAT, SO WARPING MUST BE ON IT TO AVOID CRASHED OR SCRATCHES AGAINST THE HOTEND, TOOLHEAD OR FAN DUCT:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/506441/2024-01-08_4e8d6b3718188.jpg"></figure>&nbsp;<h2>BE SURE WHEN YOU'RE PRINTING , THE PRINT IS NOT WARPING!!</h2><h2>With what materials should it be printed?</h2>I recommend PAHT-CF and PET-CF. This is because, when the printer is performing the "nozzle cleaning tip" function, the nozzle temperature is 200°C. So I recommend printing it with materials that resist high temperatures to avoid deformation or future problems.<h3>Do you want to use ABS? Ok, you're free to do so, but don't give me a bad rating for YOUR CHOICE!</h3>&nbsp;I have tested this model so many times and it works smoothly! No issue.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/506441/2024-01-08_23fcf65ea124e8.gif"></figure>&nbsp;&nbsp;&nbsp;<h4>ALL THE MODELS ARE AVAILABLE ON MY PAGE.</h4><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/506441/2024-01-08_3c598c342851.jpg"></figure>&nbsp;<h2>NOTICE:</h2><h2>DON'T MODIFY THE ORIENTATION!</h2><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/506441/2024-01-08_68a58a86cfa648.jpg"></figure><h4>NOTICE: THE FOLLOWING PHOTO SHOWS THE EXTRUDED FILAMENT BEING HELD ON THE SILICON NOZZLE WIPER, BEFORE PRINTING.</h4><h4>THIS IS ONE OF THE MAIN REASONS WHY I DESIGNED THIS MODEL. THAT EXTRUDED FILAMENT COULD RUIN YOU FIRST LAYER!</h4><h4>PLEASE CHECK ALWAYS IF THE SILICON NOZZLE WIPER IS CLEAN AND IF YOU SEE THAT SOME EXTRUDED FILAMENT HAS BEEN DEPOSITED ON IT, REMOVE THE EXTRUDED FILAMENT AND ENJOY 3D PRINTING.</h4>THE PHOTO WAS MADE AS EXAMPLE AFTER 3h PRINTING.MY MODEL HAS ALREADY BEEN TESTED, FOR A MONTH AND I DON'T FIND ANY PROBLEMS.THE MODEL ,AS TEST EXAMPLE IN THE PIC, WAS PRINTED IN ABS, BUT I STILL RECOMMEND SUPERIOR FILAMENTS LIKE PC , PATH OR PET.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/506441/2024-01-17_3a990be51d02c8.jpg"></figure>&nbsp;𝙽𝙾𝚃𝙸𝙲𝙴:𝚃𝙷𝙸𝚂 𝙸𝚂 𝙰 𝚂𝙸𝙼𝙿𝙻𝙴 𝙿𝚁𝙸𝙽𝚃. 𝙰𝚂 𝚈𝙾𝚄 𝚂𝙴𝙴 𝙸𝙽 𝚃𝙷𝙴 𝙿𝙸𝙲𝚃𝚄𝚁𝙴𝚂 , 𝙼𝚈 𝙼𝙾𝙳𝙴𝙻 𝚂𝚃𝙸𝙲𝙺 𝚅𝙴𝚁𝚈 𝙶𝙾𝙾𝙳 𝙾𝙽 𝚃𝙷𝙴 𝙱𝙴𝙳. 𝚂𝙾 𝙱𝙴𝙵𝙾𝚁𝙴 𝚈𝙾𝚄 𝙶𝙸𝚅𝙴 𝙱𝙰𝙳 𝚁𝙰𝚃𝙸𝙽𝙶 𝚃𝙾 𝙼𝚈 𝙿𝚁𝙾𝙵𝙸𝙻𝙴𝚂, 𝙱𝙴 𝚂𝚄𝚁𝙴 𝚈𝙾𝚄 𝙷𝙰𝚅𝙴 𝙰 𝙶𝙾𝙾𝙳 𝙱𝙴𝙳 𝙰𝙳𝙷𝙴𝚂𝙸𝙾𝙽 𝙰𝙽𝙳 𝙰𝚂𝙺 𝚃𝙾 𝚈𝙾𝚄𝚁𝚂𝙴𝙻𝙵 , 𝚆𝙷𝚈 𝚈𝙾𝚄 𝙳𝙾𝙽'𝚃 𝙷𝙰𝚅𝙴 𝙰 𝙶𝙾𝙾𝙳 𝙱𝙴𝙳 𝙰𝙳𝙷𝙴𝚂𝙸𝙾𝙽. 𝙸 𝙳𝙾𝙽'𝚃 𝚆𝙰𝙽𝚃 𝚃𝙾 𝚄𝙿𝙻𝙾𝙰𝙳 𝙰 𝙻𝙾𝚃 𝙾𝙵 𝙿𝚁𝙾𝙵𝙸𝙻𝙴𝚂 𝙵𝙾𝚁 𝙴𝙰𝙲𝙷 𝚂𝙸𝙽𝙶𝙻𝙴 𝙿𝚁𝙾𝙱𝙻𝙴𝙼 𝚈𝙾𝚄 𝙷𝙰𝚅𝙴 𝙰𝙽𝙳 𝙵𝙾𝚁 𝙴𝚅𝙴𝚁𝚈 𝚂𝙸𝙽𝙶𝙻𝙴 𝙼𝙾𝙳𝙴𝙻! 𝙴𝚅𝙴𝙽 𝚈𝙾𝚄 𝚆𝙰𝙽𝚃 𝚃𝙾 𝚂𝙷𝙰𝚁𝙴 𝙾𝙽𝙴 , 𝙸𝚃 𝙳𝙾𝙴𝚂𝙽'𝚃 𝙼𝙰𝙺𝙴 𝚂𝙴𝙽𝚂𝙴 𝙵𝙾𝚁 𝚃𝙷𝙴 𝚂𝙸𝙼𝙿𝙻𝙴 𝙼𝙾𝙳𝙴𝙻 𝙸𝚃𝚂𝙴𝙻𝙵!𝙿𝙻𝙴𝙰𝚂𝙴, 𝙻𝙸𝙺𝙴 𝙸 𝚂𝙰𝙸𝙳 𝚃𝙷𝙴 𝙼𝙾𝙳𝙴𝙻 𝚂𝚃𝙸𝙲𝙺𝚂 𝙾𝙽 𝚃𝙷𝙴 𝙱𝙴𝙳 𝙴𝙰𝚂𝚈! 𝙽𝙾𝚃 𝙰𝙻𝚆𝙰𝚈𝚂 𝚁𝙴𝙳𝚄𝙲𝙸𝙽𝙶 𝚃𝙷𝙴 𝚂𝙿𝙴𝙴𝙳 𝙲𝙰𝙽 𝙷𝙴𝙻𝙿 𝚈𝙾𝚄 𝚃𝙾 𝚂𝚃𝙸𝙲𝙺 𝙴𝚅𝙴𝚁𝚈 𝙼𝙾𝙳𝙴𝙻 𝙾𝙽 𝚃𝙷𝙴 𝙿𝙻𝙰𝚃𝙴! 𝚃𝙷𝙰𝙽𝙺 𝚈𝙾𝚄 𝙵𝙾𝚁 𝚃𝙷𝙴 𝚄𝙽𝙳𝙴𝚁𝚂𝚃𝙰𝙽𝙳𝙸𝙽𝙶!&nbsp;ᴵᶠ ʸᵒᵘ ʰᵃᵛᵉ ᵖʳᵒᵇˡᵉᵐˢ ᵃᵇᵒᵘᵗ ᵗʰᶦˢ ᵐᵒᵈᵉˡ, ʲᵘˢᵗ ˢᵉⁿᵈ ᵐᵉ ᵃ ᵖʳᶦᵛᵃᵗᵉ ᵐᵉˢˢᵃᵍᵉ ᵃⁿᵈ ᴵ'ˡˡ ʰᵉˡᵖ ʸᵒᵘ.ᴳᶦᵛᵉ ᵐᵉ ᵃ ˡᶦᵏᵉ ᵃⁿᵈ ᶠᵒˡˡᵒʷ ᵐʸ ᵖᵃᵍᵉ.ᵀʰᵃⁿᵏ ʸᵒᵘ ᵗᵒ ˢᵘᵖᵖᵒʳᵗ ᵐᵉ ᵃⁿᵈ ʰᵃᵖᵖʸ ᵖʳᶦⁿᵗᶦⁿᵍ.

PURGE CHUTE COVER WITH SILICON NOZZLE WIPER

X1C upgrades

TwistyPrints

The model does not require supports, the head is separate from the body, you can insert the head joint on the neck hole after print. If you need assistance just ask! Keep in mind that the purchase of this model does not include a commercial license. If you want to sell prints of our models ,get all our creations in early access and exclusive models take a look at our Patreon Page!⭐ ⭐⭐<a target="_blank" href="https://www.patreon.com/user?u=81262195" rel="nofollow noopener">https://www.patreon.com/user?u=81262195</a> ⭐⭐⭐ Follow us on instagram to stay updated about new models !-<a target="_blank" href="https://www.instagram.com/twisty_prints/" rel="nofollow noopener">https://www.instagram.com/twisty_prints/</a>

Articulated Cute Dragon

Cool things

R3DPanda

I felt obligated to improve and redesign the model. This version fixes all the small problems that the first version had and makes pulling out the PTFE tubes super easy. Additions:+Slimmer. Doesn't collide with the other tubes. +No more slipping off after removing a tube. +Looser fit. Doesn't squeeze the tubes. +Better design with less sharp edges.