D3sktup

PriscoRulez

Introducing the Trolex, a 3D printed working watch powered by a Miyota 2035 Quartz movement. Shock your watch-collector friends with a custom piece that will certainly attract their interest!With its 41.3mm size, this timepiece can adapt to most wrists and for all the occasions provided you use filaments that suit your taste. It is fully working and relatively easy to put together.Create your own personal wristwatch and show the world your style! Now, I also added a custom text version of the dial for your special messages.&nbsp;&nbsp;Important notes: Dial, hands and back case require a 0.2mm nozzle. The other pieces can also be done with 0.4mm nozzle, to allow more filament options (e.g. marble, sparkle, etc.) but would benefit from a 0.2 nozzle for higher quality.&nbsp;To work the watch requires a Miyota 2035 quartz movement, which is easy to find online and fairly cheap, but could be adapted to other movements by creating a custom inner movement holder. I got 5 for 9£ from Aliexpress here: <a target="_blank" href="https://www.aliexpress.com/item/1005006170752556.html" rel="nofollow noopener">https://www.aliexpress.com/item/1005006170752556.html</a>&nbsp;I do not own an AMS, so the watch is designed to be printed without one, for multi-color dial there is a pause set at the start of the 14th layer and change filament. If you do not want to change filament you will have to resume print to finish it, or remove the pause before slicing the plate. &nbsp;There are now two options for the wristband: flexible to be made with TPU (as in the cover picture) and rigid for any other filament.The rigid version is made up of pieces that need spare filament wire to be held together. This allows to adjust size by removing or adding more pieces.&nbsp;Needless to say the hands are the hardest part to get right and might require a few print (I am still working on a more reliable version of these). For reliability I would recommend buying the hands if you actually plan to use this watch as I do not know how long the 3d printed hands will last or keep the time. The second hands was too small even for the 0.2 mm nozzle.&nbsp;I printed it using a smooth PEI plate, I have not tested it yet on other plates, particularly for hands and back cover which have designs on the bottom surface.&nbsp;Building instructions:I am planning to produce a dedicated video on how to build it, in the meantime the Fusion360 scheme shows more or less where each piece should go.<ol><li>Place the movement in the holder, snap the dial in place over it and insert it into the main case;</li><li>Push in place the back case and force the spacer ring over the dial to secure the movement in place, then add the top ring;</li><li>Attach the wristband pieces using spare filament, the holes have a tight fit so it is best to use some pliers to help pushing the filament through;</li><li>Insert the stem on the movement, pull it into time-set position then screw the crown in from outside the case. (Leave enough play to allow the stem to be pushed in into normal position). Use some super glue here to fix the crown on the stem.</li><li>Set the watch into the time-set position;</li><li>Finally use some precision tweezers to push the hands in place carefully. It is not easy and might require some attempts and patience;</li><li>Turn the crown to check the hands are moving correcly and freely;</li><li>Wear it proudly!</li></ol>

Trolex - the 3D printed working wrist watch

Relogios

Carlson

F35 Lightning Fighter - as detailed model on stand.

F-35 Lightning II

Brinquedos

Josh-3D

A headphone stand with industrial styling!&nbsp;I have my previously designed stand, but it's not always suited for larger headphones. I also wanted something a little more industrial styled, and thus managed to come up with this.&nbsp;Model is featured in Bambu PLA Matte Charcoal and Bambu Iridium Gold Metallic. A good alternative with similar look to Bambu's metallic is Hatchbox's Metallic line. There might be others, but that's the one I'm aware of.&nbsp;[Spotlight]Check out this <a target="_blank" href="https://makerworld.com/en/models/198355#profileId-218961" rel="nofollow noopener">PS5 Headset focused remix</a> by <a target="_blank" href="https://makerworld.com/en/@JJDeluxeDesigns" rel="nofollow noopener">Johan Jamaer - JJ Deluxe Designs</a>! &nbsp;[Tools & Assembly]&nbsp;Assembly is pretty easy. You'll need the following hardware and tools.M4x10 - 2M4x16 - 4 M4x20 - 4 M4x25 - 4 M4x40 - 4 M4 Nuts - 16Hex DriverDrill bit for clearing holes&nbsp;For the screws, I am using M4 Socket head cap screws. If you don't have M4 screws on hand, I would recommend purchasing an assortment kit, like <a target="_blank" href="https://www.amazon.com/gp/product/B09TYR314X" rel="nofollow noopener">this one from amazon</a>.&nbsp;Start by clearing out the holes as illustrated. A flat surface was left on these holes so additional support wouldn't be needed during printing. Only the leg and foot pads will need this.<figure class="image image_resized" style="width:51.27%;"><img src="https://makerworld.bblmw.com/makerworld/draft/735388/2024-02-16_cc69e7772ce41.png"></figure>For assembly, you'll be using the 3d printed spacers along with the M4 screws. The side with the nut is wedged slightly, so as you tighten it, it should grip onto the model instead of spinning.<figure class="image image_resized" style="width:50.28%;"><img src="https://makerworld.bblmw.com/makerworld/draft/735388/2024-02-16_e4a86bd163cf6.png"></figure>For the headphone rest, first screw the top to the bracket.<figure class="image image_resized" style="width:49.1%;"><img src="https://makerworld.bblmw.com/makerworld/draft/735388/2024-02-16_4922cbd159136.png"></figure>Then use the following image to help guide the rest of the build, and which screws go where. First assemble the main arm, and then work your way outwards, attaching the base, legs, feet, and headphone rest.<figure class="image image_resized" style="width:71.27%;"><img src="https://makerworld.bblmw.com/makerworld/draft/735388/2024-02-16_6c33876ddced.png"></figure>&nbsp;-------If you like my work, consider showing your love by <a target="_blank" href="https://www.buymeacoffee.com/josh3d" rel="nofollow noopener">Buying me a coffee</a>. Additionally, if you're looking to sell prints of my design, please check out my <a target="_blank" href="https://www.patreon.com/josh3d/" rel="nofollow noopener">Patreon</a> page for more information.

Relogios

Brinquedos

Musica