JulieNicoleDesigns

ideat0m

<a target="_blank" href="https://makerworld.com/en/u/1897072971/collections" rel="nofollow noopener">More puzzle in my collections.</a> ----------------------------------------------------This is the version for printing without multi-color unit (AMS)The AMS version of this puzzle <a target="_blank" href="https://makerworld.com/en/models/220756" rel="nofollow noopener">can be found here</a>------------------------------------------------------------------------- Insertion puzzles allow children to develop their motor skills and orientation in the shapes of objects. Individual parts are inserted into their place in the picture. The parts fit together beautifully and simply. Can also be used as a decoration. Black eyes, White eyes part just insert inside and/or secure with glue. Nose secure with glue (is a small part, maybe just for sure…)Before use, I recommend that you check whether the printed object has sharp edges, or tear them off with the help of a knife for pulling the edges or with sandpaper  <a target="_blank" href="https://makerworld.com/en/u/1897072971" rel="nofollow noopener">You can find many more in my profile</a>**************************Toto je verze pro tisk bez multibarevne jednotky (AMS)Verzi tohoto puzzle pro AMS <a target="_blank" href="https://makerworld.com/en/models/220756" rel="nofollow noopener">naleznete zde</a>---------------------------------------------------------------Vkládací puzzle umožňuje dětem rozvíjet jejich motoriku a orientaci v tvarech předmětů. Jednotlivé části se vkládají na své místo v obrázku. Díly do sebe krásně a jednoduše zapadají. Lze použít také jako dekoraci.Casti oci (cerne/bile) vlozte kam patri a muzete zajistit lepidlem. Co se tyce cenichu, jedna se o opravdu jeden z malych dilku, doporucuji jej radeji u mensich deti prilepit lepidlem primo k hlave na misto kam patri.Doporucuji pred pouzitim overit zda vytisteny objekt nema ostre hrany, tyto pak pripadne strhnout pomoci noze na stahovani hran pripadne smirkovym papirem <a target="_blank" href="https://makerworld.com/en/u/1897072971" rel="nofollow noopener">Mnoho dalsich naleznete v mem profilu</a>

Dog with Puppy puzzle for kids

Puzzle

sauryyyyy

Cinnamoroll from Sanrio

Cinnamoroll

Sanrio

anselor

Super Mario Thwomp inspired planter pot.&nbsp;Compatible with <a target="_blank" href="https://makerworld.com/en/models/457126#profileId-365092" rel="nofollow noopener">75mm square self-watering inserts</a>.&nbsp;Easily move plants to another compatible pot to update your home.&nbsp;NEW: <a target="_blank" href="https://makerworld.com/en/models/517683" rel="nofollow noopener">Magnetic box version for fridge or whiteboard</a>!<figure class="table" style="width: 45.75%"><table class="ck-table-resized"><colgroup><col></colgroup><tbody><tr><td><figure class="image"><a href="https://makerworld.com/en/models/517683" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000493900/design/2024-06-29_0b0c7698840d3.png" width="1217" height="955"></a></figure></td></tr></tbody></table></figure>&nbsp;<h3>Super Mario Themed Planters</h3><figure class="table" style="width: 100%"><table class="ck-table-resized"><colgroup><col><col><col><col></colgroup><tbody><tr><td><figure class="image"><a href="https://makerworld.com/en/models/493909" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000493900/design/2024-06-12_8dca60c098716.png"></a></figure></td><td><figure class="image"><a href="https://makerworld.com/en/models/493913" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000493900/design/2024-06-12_6c7d9166fc4e7.png"></a></figure></td><td><figure class="image"><a href="https://makerworld.com/en/models/493911" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000493900/design/2024-06-12_73b6104aafc2c.png"></a></figure></td><td><figure class="image"><a href="https://makerworld.com/en/models/493900" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000493900/design/2024-06-12_fb883445c1ea7.png"></a></figure></td></tr><tr><td><figure class="image"><a href="https://makerworld.com/en/models/493916" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000493900/design/2024-06-12_1439f8d360519.png"></a></figure></td><td><figure class="image"><a href="https://makerworld.com/en/models/493917" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000493900/design/2024-06-12_ab2dfce73890e.png"></a></figure></td><td><figure class="image"><a href="https://makerworld.com/en/models/493921" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000493900/design/2024-06-12_88e56be1fb5bf.png"></a></figure></td><td><figure class="image"><a href="https://makerworld.com/en/models/493926" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000493900/design/2024-06-12_be0292b0e9f4e.png"></a></figure></td></tr></tbody></table></figure><h3>Other Self-Watering Insert Types</h3><figure class="table" style="width: 797.813px"><table class="ck-table-resized" style="border: 1px double rgb(179, 179, 179)"><colgroup><col><col></colgroup><tbody><tr><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><figure class="image"><a href="https://makerworld.com/en/models/428291" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000493900/design/2024-06-09_8e85c8f84f81b.jpg"></a></figure><a target="_blank" href="https://makerworld.com/en/models/428291" rel="nofollow noopener">4&#34; / 100 mm Round</a></td><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><figure class="image"><a href="https://makerworld.com/en/models/489671" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000493900/design/2024-06-12_1694b0deb26b9.png"></a></figure><a target="_blank" href="https://makerworld.com/en/models/489671" rel="nofollow noopener">3&#34; / 75mm Round</a></td></tr></tbody></table></figure>&nbsp;<h3>Other Compatible 75mm Planters</h3><figure class="table" style="height: 898.167px; width: 100%"><table class="ck-table-resized" style="background-color: rgb(255, 255, 255); border: 1px double rgb(179, 179, 179)"><colgroup><col><col><col></colgroup><tbody><tr><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em; text-align: center; width: 392.958px"><figure class="image image_resized" style="width: 379.49px"><a href="https://makerworld.com/en/models/457134#profileId-365099" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000493900/design/2024-05-08_219130de3d911.png"></a></figure><a target="_blank" href="https://makerworld.com/en/models/457134#profileId-365099" rel="nofollow noopener">MOM Rectangular Planter Box</a></td><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em; text-align: center"><figure class="image"><a href="https://makerworld.com/en/models/457219#profileId-365203" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000493900/design/2024-05-08_b2eef15e32302.png"></a></figure><a target="_blank" href="https://makerworld.com/en/models/457219#profileId-365203" rel="nofollow noopener">Faceted Cube Planter</a></td><td><figure class="image"><a href="https://makerworld.com/en/models/458291#profileId-366339" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000493900/design/2024-05-27_fbc945c7288a9.png"></a></figure><a target="_blank" href="https://makerworld.com/en/models/458291#profileId-366339" rel="nofollow noopener">Modern Minimalist Square Planter</a></td></tr><tr><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em; text-align: center"><figure class="image"><a href="https://makerworld.com/en/models/458291#profileId-366339" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000493900/design/2024-05-27_fbc945c7288a9.png"></a></figure><a target="_blank" href="https://makerworld.com/en/models/458291#profileId-366339" rel="nofollow noopener">Modern Minimalist Square Planter</a></td><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em; text-align: center"><figure class="image"><a href="https://makerworld.com/en/models/458283#profileId-366332" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000493900/design/2024-05-08_5695d84eda67b.png"></a></figure><a target="_blank" href="https://makerworld.com/en/models/458283#profileId-366332" rel="nofollow noopener">No Frills Basic Square Planter</a></td><td> </td></tr></tbody></table></figure>&nbsp;-Feedback letting me know how your print went would be greatly appreciated.If you&#39;re feeling generous and like what you see, please give a boost. Alternatively, <a target="_blank" href="https://buymeacoffee.com/anselor" rel="nofollow noopener">Buy Me a Coffee</a> or just <a target="_blank" href="https://paypal.me/anselor?country.x=US&amp;locale.x=en_US" rel="nofollow noopener">Send me a tip</a>.

Planter Thwomp Super Mario Self-Watering 3"/75mm

Mario

MakerVerse Designs

A Mandalorian Helmet pen holder or plant pot which is fully 3D-printed<ul><li>prints without support</li><li>You can print it with and without AMS (there are two print profiles)</li><li>It´s also a cool model for painting</li></ul>Have fun with it and leave a like or subscribe if you like it!If there are any suggestions for improvement, feel free to write a comment.

Mandalorian Helmet - pen holder / plant pot

Planters

BoomBamPrints

The dice tower prints in 3 separate parts which all easily slide into place.

Volcano Dice Tower

Dice

Jonas Gartner

Check out my electric toothbrush travel case! Unlike most existing models it fits on the A1 mini printbed, is less clumsy and also more estetically pleasing. It is made to fit all different kinds of electric toothbrushes, has small holes for ventilation and fillets on all inner edges to prevent dirt buildup. It also has a small compartment in which you can keep a travel size toothpaste or Qtips.<figure class="image image_resized" style="width: 20.85%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000487824/design/2024-06-07_1dc7448e38eaf.gif"><figcaption>The lid sits on quite tightly so I recommend opening it like this instead of just trying to rip it off.</figcaption></figure>&nbsp;The inner height is 200mm which i think fits all oral-B toothbrushes (tip removed), if you have a taller one you can stretch the model a little in bambu slicer.

Slim Toothbrush Travel Case - A1 mini compatible

Bathroom

Dr Operator

UPDATE 2/15/24: The <a target="_blank" href="https://makerworld.com/en/models/183898#profileId-202793" rel="nofollow noopener">BLT upgrade</a> for Sliced Bread is now available.<figure class="image image_resized" style="width:30.88%;"><img src="https://makerworld.bblmw.com/makerworld/draft/557704/2024-02-15_c758983e6e179.jpg"></figure>&nbsp;&nbsp;&nbsp;&nbsp;This is my first upload to MakerWorld, I hope I have everything uploaded properly. Having recently bought an A1 with the AMS, I decided to update one of my Transformer designs. Sliced Bread is an update/remix of my <a target="_blank" href="https://www.printables.com/model/399650-transformers-ham-and-cheese" rel="nofollow noopener">Ham and Cheese</a> design. I've updated the shoulder and hips joints, changed the logo to a Docobot logo as well as changing the overall design to require either a multi colour printer or painting skills.&nbsp;An assembly guide is on the way. The design uses eight 5mm x 3mm magnets that are completely optional. They just help it keep it's shape when in bread mode.&nbsp;Also pictured is my Transformer design <a target="_blank" href="https://www.printables.com/model/423293-transformers-a-toaster-named-crumbs" rel="nofollow noopener">A toaster named Crumbs</a> which Sliced Bread is designed to fit into. If you'd like to check out my other Transformer designs, you can find them all on my <a target="_blank" href="https://www.printables.com/@DrOperator/models" rel="nofollow noopener">Printables profile</a> Docobots (Dock-Oh-bots) are a faction of former Autobots and Decepticons who have no interest in fighting a never ending war and just want to live in peace. On the run from both the Autobots and Decepticons, they turn to their namesake Dr. Operator to help alter their transformed state from the usual Car/Plane/vehicle into everyday objects to help them avoid detection. ASSEMBLY GUIDE <figure class="image image_resized" style="width:56.47%;"><img src="https://makerworld.bblmw.com/makerworld/draft/557704/2024-02-02_fcdc191da6f5b.png"></figure>&nbsp;Assembly isn't too difficult and should only take a couple minutes. There is no hardware necessary for assembly but there is the option to use eight 5mm x 3mm magnets to help keep it's form while in bread mode. First off, you will need two Pins and one Leg, Thigh and Joint as seen below. <figure class="image image_resized" style="width:43.86%;"><img src="https://makerworld.bblmw.com/makerworld/draft/557704/2024-02-02_d38cab2ca554b8.png"></figure>&nbsp;Take the Joint, slide it into the Thigh and insert the Pin. Then take the Thigh, insert it into the Leg and insert the Pin. Repeat the steps for the second Leg and put them off to the side for a moment. <figure class="image image_resized" style="width:93.38%;"><img src="https://makerworld.bblmw.com/makerworld/draft/557704/2024-02-02_58b2b46deb8fc.png"></figure>&nbsp;&nbsp;&nbsp;&nbsp;Next, you will need one Joint, Arm 1, Arm 2 and Hand. <figure class="image image_resized" style="width:38.25%;"><img src="https://makerworld.bblmw.com/makerworld/draft/557704/2024-02-02_2f76f4b41e26b8.png"></figure> Place the Hand and Joint into Arm 2 and then attach Arm 1 as seen below. Repeat the steps for the second arm and then set them aside. <figure class="image image_resized" style="width:89.16%;"><img src="https://makerworld.bblmw.com/makerworld/draft/557704/2024-02-02_07617c09de6198.png"></figure>&nbsp;&nbsp;&nbsp;Next, we're going to attach the legs and head to the chest. You'll need Chest 1, Chest 2, Head and the two assembled legs.<figure class="image image_resized" style="width:61.18%;"><img src="https://makerworld.bblmw.com/makerworld/draft/557704/2024-02-02_dfe2a4c3b7e4d.png"></figure>&nbsp;&nbsp;Place the legs and head onto the tracks on Chest 2 and then attach Chest 1 as seen below. I would suggest using a drop of glue on each of the three pegs on Chest 2 before attaching Chest 1. The fit is snug enough already, but I used glue on mine to increase durability. <figure class="image image_resized" style="width:87.59%;"><img src="https://makerworld.bblmw.com/makerworld/draft/557704/2024-02-02_46860bd6a92358.png"></figure>&nbsp;&nbsp;&nbsp;&nbsp;Grab the two completed arms and the last two pins.<figure class="image image_resized" style="width:54.96%;"><img src="https://makerworld.bblmw.com/makerworld/draft/557704/2024-02-02_9114f38a1e2de8.png"></figure>&nbsp;&nbsp;&nbsp;&nbsp;Attach the arms to the body using the pins and we're just about done. <figure class="image image_resized" style="width:82.72%;"><img src="https://makerworld.bblmw.com/makerworld/draft/557704/2024-02-02_6863dd847f63b.png"></figure>&nbsp;&nbsp;&nbsp;&nbsp;Last thing to do is attach Head 2 using the Head Pin and you're good to go.&nbsp;<figure class="image image_resized" style="width:88.79%;"><img src="https://makerworld.bblmw.com/makerworld/draft/557704/2024-02-02_62c5ac6b0b0298.png"></figure>&nbsp;&nbsp;

G1 Docobot: Sliced Bread

Tranformers

NUKDDD

please give me a 👍🏻 if you like this, even if you don&#39;t download this, it’ll help more people discover this. thanks so much! Follow me for more to come.&nbsp;Stumpy, the Short Shroom. These adorable, eye catching mushroom tea lights can be used all year round, not just at parties.&nbsp;Printed with Bambu&#39;s <a target="_blank" href="https://shrsl.com/4gfvl" rel="nofollow noopener">Basic</a> and <a target="_blank" href="https://shrsl.com/4gfae" rel="nofollow noopener">Matte PLA</a>&nbsp;The stump can hold up to 39mm LED tea light candles. The print profile is print by object, 2 color print, but you can choose the same filament and print both in the same color before you send it to the printer.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/849423/2023-12-15_774a7907e5d78.gif"><figcaption>2 parts, easy to assemble. Tops are printed with pastel blue, green, pink and yellow, the stumps are all white.</figcaption></figure>&nbsp;There are small overhangs at the bottom of the stump, but you can&#39;t really tell if you print it in white like I did, I think it looks more organic that way, therefore, no support for the stump.&nbsp;You can support me by using my affiliate link to purchase <a target="_blank" href="https://amzn.to/3JiVXuY" rel="nofollow noopener">the LED candle</a> I purchased in my video and photos. I may earn a small commission.&nbsp;If you&#39;re careful and have steady hands, you can stack multiples of these very high.&nbsp;Checkout my other lights: &nbsp;<a target="_blank" href="https://makerworld.com/models/162497" rel="nofollow noopener">Felix, the Flexi Shroom</a>.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/849423/2024-01-30_35ae5eb1c61068.jpeg"></figure>&nbsp;Meet <a target="_blank" href="https://makerworld.com/en/models/86208#profileId-92095" rel="nofollow noopener">Teeny</a>, the tiny tree.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/849423/2023-12-15_411c2252fc6c1.gif"></figure>Don&#39;t forget to check out <a target="_blank" href="https://makerworld.com/en/models/127134#profileId-137541" rel="nofollow noopener">Shady, the Slim Shroom</a>.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/849423/2024-01-06_7a65931f4aab7.jpg"></figure>Disclaimer: This model is part of the Creator Program, When you purchase the Lamp Kit 001 or filament through the links provided, creators may earn an affiliate commission as a reward of their work. (The creator program is currently in the trial phase. The application is not yet open to public.)

Stumpy Mushroom Lamp

Lamps

Gamesandtoys64

Among us inspired Crewmate based off of trilobug3d amazing model on Thingiverse. Remodeled with 6x2mm magnet connections and kitted out with new magnetic hand and hat accessory options, and a cutout for the bone. I plan on making more hat and hand option add on as well. magnets and bone should pressure fit fairly well depending on filament type, however I would glue them in place as well. Multiple top part styles for magnets or no magnets visible. &nbsp;6x2mm magnets <a target="_blank" href="https://www.amazon.com/dp/B07XRQ44VC/?coliid=I29QJGA48B4JC4&amp;colid=12XYR2VVZG7UF&amp;ref_=list_c_wl_lv_ov_lig_dp_it&amp;th=1" rel="nofollow noopener">https://www.amazon.com/dp/B07XRQ44VC/?coliid=I29QJGA48B4JC4&amp;colid=12XYR2VVZG7UF&amp;ref_=list_c_wl_lv_ov_lig_dp_it&amp;th=1</a>

Among Us Crewmate 

Among Us

idmyron

I understand that it does not perform its function 100%, but a small gap appears, thanks to which the page can be found3mf addedIt can be printed in multicolor or painted. I printed in 4 colors except black and then colored the eyes and eyebrows with just a marker.Be creative with the colors you use or even paint it, but don&#39;t forget to upload your works :) I&#39;ll be happy to look at them, and it will help me a lot!!!&nbsp;

FLAT JERRY BOOKMARK

Bookmark

petea4

fallout vault boy clock with dots

Clocks

Miguel M.

LED strip clip.Simple and works very well. Screws on one side only, so very compact. fits 10mm strips.Do not attempt to print on its side, screw will split the layers and crack the print…..I printed 24 of these all at once with no problems. Even that small tip had no problem sticking to the bed with no brim.UpdateSee my remix of this strip, designed for mounting 2 parallel strips.<a target="_blank" href="https://makerworld.com/en/models/492531" rel="nofollow noopener">https://makerworld.com/en/models/492531</a>And If you have a minute, check out my other models!&nbsp;&nbsp;&nbsp;&nbsp;

LED Strip Clip

Household Items

hofflab

<h2>Simple A1mini Cable Chain for Heatbed. (A1mini ready, ≈ 40g)</h2>&nbsp;Only 16 chain links and 15 lids are required, but I added 18 of both as they do not require much filament. Sometimes, little adhesion problems will ruin the look and functionality of a chain link or lid.&nbsp;Removing  supports of the bed anchor can be quite tricky and will require some form of tweezers!&nbsp;Installation:<ol><li>First install the base and bed anchor, which should fit perfectly (don&#39;t worry too much about the cables, as they will fit into place “automatically”).</li><li>Attach 16 links to each other and both anchors. (The open side should face “inside”. See my pictures). The links could also be attached one by one with alternating “openings”, I just did not like the look of it. Try it out and decide for yourself.</li><li>Push the bed back as far as possible for easy installation of the lids. Because of their size they are quite fragile so be careful while installing or disassembly.</li></ol>If you encounter any problems or got ideas for improvement just massage me in the DMs.

A1 mini Heatbed Cable Chain

A1 Mini

gustav.ferdman

More stuff for your pets in the links: Pet Comb (Fully printable)<a target="_blank" href="https://makerworld.com/en/models/438243#profileId-343631" rel="nofollow noopener">https://makerworld.com/en/models/438243#profileId-343631</a>&nbsp;Pet treat puzzle (dog or cat) <a target="_blank" href="https://makerworld.com/en/models/424729#profileId-328162" rel="nofollow noopener">https://makerworld.com/en/models/424729#profileId-328162</a> This adapter screws onto a PET-bottle to form a portable bowl for your dog when you are outside. It works by either holding it straight up squeezing the bottle so that water fills the bowl or tilting the bottle, whichever you prefer. There&#39;s also a splash lid for the bowl which screws on easily so that the water doesn&#39;t pour out if the bottle falls over standing on the ground.&nbsp;Feel free to message me if you have ideas for models you would like to print.Drop a like and check out my other models.

Dog Bowl - Portable PET-bottle Adapter

Doggie Items

Pistachio

Paw print earrings at 3mm thickness.  Single can be sized up and used as a necklace charm.

Paw Print Earring

Earrings/Keychains

FallenAngel

Mug to hold typical beer cans ( The slot is ~70mm in diameter). Mug's Height is ~150mm &nbsp;Note: requires Support at few areas.

Mug - Dragon Version 

Mugs/Cups

Tjoene

Great Wall of China Sand Castle Mold: Discover Ancient Wonders at the Beach! Transform your beach day into an epic adventure with the Great Wall of China Sand Castle Mold! Perfect for summer fun, this detailed mold allows you to create a stunning sand replica of one of the world&#39;s most iconic landmarks right on the shore. Imagine the sunny sands of your favorite beach turning into the ancient stones of the Great Wall, stretching across your sandy canvas just like it does through the mountains of China. Whether you&#39;re a history buff, a sandcastle enthusiast, or simply looking for a unique way to enjoy your time at the beach, this mold is sure to bring a touch of magic and awe to your summer. Crafted for ease and precision, this mold helps you build intricate sections of the wall, complete with battlements and towers, making your sandcastle creations stand out from the rest. Gather your friends and family for a day of building, learning, and laughter under the sun. Bring one of the new Seven Wonders of the World to the beach this summer with the Great Wall of China Sand Castle Recommended Materials: These were printed in pla+, but I would also recommend petg or abs for durability. Orientation and support: These models were printed with 10% infill, without support with the opening of the mold facing up (as in the 3mf file). The tower (part03) does have a segment it needs to bridge, but was able to do so without support.

Great Wall Of China Sand Castle Mold

Beach Toys

Stag 3D

<h2>Geometric Stags Head Decor</h2>A modern and contemporary stags head decoration, the perfect addition to any home. &nbsp;The prints pictured are in Bambu PLA Matte white and PLA Galaxy Black. &nbsp;

Stags Head Decor

Home Decor

Whopper Printing

This fun model is print-in-place and prints entirely without support and folds together right off the build plate. No assembly!&nbsp;This model is designed to fit small LED tealights inside (but you can change the source of light to anything you want)! Optionally, I've designed an insert that when lit from the back, takes the design to another level!&nbsp;The wheels are locked to the body of the model during printing in order to ensure nothing comes off the print bed during printing, but can be broken free and rotated after printing.&nbsp;If you would like to support me, consider these options:<ul><li><a target="_blank" href="https://whopperprinting.com/" rel="nofollow noopener">WhopperPrinting.com</a></li><li><a target="_blank" href="https://patreon.com/whopperprinting" rel="nofollow noopener">Patreon</a></li><li><a target="_blank" href="https://whopperprinting.Etsy.com" rel="nofollow noopener">Etsy</a></li><li><a target="_blank" href="https://instagram.com/whopperprinting" rel="nofollow noopener">Instagram</a></li><li><a target="_blank" href="https://discord.gg/UfyQhUfn4N" rel="nofollow noopener">Discord</a></li><li><a target="_blank" href="https://www.tiktok.com/@whopperprinting" rel="nofollow noopener">TikTok</a></li></ul>

Haunted Hearse - Print-in-Place Foldable Model

Halloween

Mentech

The wedding icing on the cake is a beautiful addition to the wedding party and will certainly charm those around you I only recommend it, I used it myself Choose the size of your choice, I printed the wedding print at 150% I hope it will make you happy too printing success&nbsp;The second version, marked with the number 2, has an adjusted height of the pin, so I recommend looking at both variants and choosing which one you need

Wedding Icing On The Cake

Wedding

starklabs3d

Homer fading into the bushes Sponge holder. The base has holes on the front face for water to drain.&nbsp;Printing Instructions:<ol><li>Print Settings: Use the provided optimal print profile for the best results.</li><li>Filament Change on Homer: During the print, there will be a pause where you need to switch out the brown filament for black to create the outline details.</li><li>Assembly: Homer and the fence pieces can be glued into place for added stability, but this step is optional as the design is made to fit snugly.</li><li>Tolerance: Be aware that tolerances may be tight, so ensure your printer is well-calibrated for precise fitting.</li></ol>Filaments used:IIIDMax yellow: <a target="_blank" href="https://amzn.to/3RmoT9F" rel="nofollow noopener">https://amzn.to/3RmoT9F</a>IIIDMax White: <a target="_blank" href="https://amzn.to/4cgrdqW" rel="nofollow noopener">https://amzn.to/4cgrdqW</a>IIIDMax Blue: <a target="_blank" href="https://amzn.to/3KCOJSV" rel="nofollow noopener">https://amzn.to/3KCOJSV</a>IIIDMax Brown: <a target="_blank" href="https://amzn.to/3Xl3fGz" rel="nofollow noopener">https://amzn.to/3Xl3fGz</a>IIIDMax Black: <a target="_blank" href="https://amzn.to/45kzEzd" rel="nofollow noopener">https://amzn.to/45kzEzd</a>&nbsp;Michael Myers version now available here: <a target="_blank" href="https://makerworld.com/en/models/495637#profileId-409820" rel="nofollow noopener">https://makerworld.com/en/models/495637#profileId-409820</a> If you have already printed this version you can easily swap to Michael Myers by just printing his figure. No need to reprint the rest as he will fit the existing slot.

Homer Sponge Holder

Simpsons

NoycePrints

Meet Dum-E, the handy desk helper industrial robot. I designed it with purpose in mind as it can function as a phone stand, webcam mount (logitech c920) and a business card holder. It doesn&#39;t end there though, as I aim to develop this platform with further attachments in future. These may be recommended from others and/ or what I think might be useful. I hope you find it useful and please feel free to comment any recommendations for attachments you would like to see in future. I look forward to seeing your different uses/ prints and colour schemes. Thank you for your continued support :)&nbsp;To keep files from getting complicated, I have only included the phone stand attachment in this upload. I have placed optional attachments in a sperate upload available on my profile titled “Dum-E optional attachments”. This will be periodically updated with new wrist attachments I think may be of use or other people suggest. Printing helper<figure class="table"><table><tbody><tr><td>Part</td><td>Quantity</td><td>Infill</td><td>Supports required</td></tr><tr><td>Arm 1</td><td>1</td><td>25%</td><td>YES</td></tr><tr><td>Arm 2</td><td>1</td><td>25%</td><td>NO</td></tr><tr><td>Shoulder Joint</td><td>1</td><td>30%</td><td>YES</td></tr><tr><td>Wrist to attachment connector</td><td>1</td><td>40%+</td><td>YES</td></tr><tr><td>Turntable</td><td>1</td><td>20%</td><td>NO</td></tr></tbody></table></figure><figure class="table"><table><tbody><tr><td>Part</td><td>Quantity</td><td>Infill</td><td>Supports required</td></tr><tr><td>Base</td><td>1</td><td>20%</td><td>NO</td></tr><tr><td>Feet</td><td>1</td><td>20%</td><td>NO</td></tr><tr><td>XL motor</td><td>1</td><td>15%</td><td>NO</td></tr><tr><td>Large motor</td><td>1</td><td>15%</td><td>NO</td></tr><tr><td>Medium motor</td><td>1</td><td>15%</td><td>NO</td></tr><tr><td>Small motor</td><td>1</td><td>15%</td><td>NO</td></tr></tbody></table></figure><figure class="table"><table><tbody><tr><td>Part</td><td>QTY</td><td>Infill</td><td>Supports required</td></tr><tr><td>Phone stand backing</td><td>1</td><td>25%</td><td>NO</td></tr><tr><td>Phone stand bottom</td><td>1</td><td>25%</td><td>NO</td></tr></tbody></table></figure>Required for assembly Superglue for fake motor attachment and Nitrile cord.1mm nitrile rubber cord, 16cm should be enough for 1 complete arm. This is only required between joints if you intend on supporting the weight of a phone etc. Alternatively, if you have TPU filament you can use Fat Tony&#39;s handy TPU O-rings. They&#39;re a quick print and don&#39;t require superglue to fit. You can get them here: <a target="_blank" href="https://makerworld.com/en/models/205832#profileId-225948" rel="nofollow noopener">https://makerworld.com/en/models/205832#profileId-225948</a> Thanks again for the great alternative Tony!&nbsp;As an optional extra, I&#39;d recommend using 4x 3M 6mm Anti-slip sticky back rubber feet. They fit in recessed circles in the corners of the feet.&nbsp; Screws: A total of 13 are required for the arm plus 3 for the phone stand, listed below.M3x10mm - QTY 12 - available on the store, linked below.M3x15mm - QTY 3M5x30mm - QTY 1Foot: 4x M3x10mm countersunk.Base: 1x M3x15mm countersunk.Shoulder joint to Arm 2 rotation point: 1x M5x30mm countersunk.Turntable: 4x M3x10mm countersunk.Rotation point between Arm 1 and Arm 2: 1x M3x15mm countersunk.Arm 1 to wrist connector rotation point: 1x M3x15mm countersunk.Coupling attachment to wrist: 1x M3x10mm countersunk.3 M3x10mm screws are required for the Phone stand. Assembly tipsCut 3 lengths of Nitrile cord, 74, 55 and 30mm in length. Glue one side of each and cure into individual circles. These will be glued on one side between the 3 separate joints on the arm. Doing this will vastly improve the holding capacity of the arm as it will provide more friction between the joints, helping to prevent them from sagging under weight.The 74mm circle goes between the elbow joint and arm 2.The 55mm circle goes between the arm 1 and 2 joint.The 30mm circle goes between the arm 1 and wrist attachment connector.I have added 3 pictures as a guide at the end of the gallery.

Dum-E the handy desk buddy. Lamp, stand, holder 

Desk Tool

Jacklove

Joining the MakerWorld family for the first time, I am very happy to share my first model with everyone. I hope you like it and can also provide your opinions or suggestions on this model for my future improvement.

Balloon dog

Woof

trixs3D

<ul><li>Model height 101 mm</li><li>Standard settings without supports</li></ul>

Hamster with knitted heart

Random Animals

<h2>The Thing!</h2>What better way to store your pens than getting a helping hand from The Thing! from the Addams Family.&nbsp;<ul><li>No supports required</li><li>Single colour print</li></ul>Recommended filament: Printed using Bambu Labs <a target="_blank" href="https://uk.store.bambulab.com/products/pla-matte-filament?variant=40661827452988" rel="nofollow noopener">PLA Matte Latte Brown (11800)</a>

The Thing! pen holder

Wednesday

Slowpoke's Workshop

Deadpool keychain/ car mirror accessories 

Marvel

RealNationPrint

<h2>VERSION 2 is RELEASED!! 20g less - stronger - smarter ! <a target="_blank" href="https://makerworld.com/en/models/445673#profileId-352143" rel="nofollow noopener">https://makerworld.com/en/models/445673#profileId-352143</a></h2>&nbsp;&nbsp;Cockpit Phone Holder Clip v1&nbsp;An innovative 3D print that revolutionizes the way mobile phones are used in cars is the new mobile phone clip for the car cockpit. This unique accessory is specifically designed to securely and stably hold a wide range of mobile phone models and can be effortlessly attached to the dashboard or ventilation slots of the vehicle. Utilizing advanced 3D printing technologies, the clip is not only robust and durable but also light and compact, making it perfect for mobile use. Its innovative design allows for quick and easy attachment of the mobile phone, enabling the driver to use the device for navigation, hands-free calls, or entertainment without compromising safety. Furthermore, thanks to its flexibility and adaptability, the clip can easily be adjusted to fit different vehicle types and mobile phone models, making it an indispensable accessory for modern drivers.  Please note that for midsummer, it&#39;s advisable to print the holders with PETG, or even better, with ABS or ASA.&nbsp;<h2>VERSION 2 is RELEASED!! 20g less - stronger - smarter ! <a target="_blank" href="https://makerworld.com/en/models/445673#profileId-352143" rel="nofollow noopener">https://makerworld.com/en/models/445673#profileId-352143</a></h2><h2>  </h2>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/423769#profileId-327023" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000421128/design/2024-04-11_6d96144b55f638.png"></a>&nbsp;Here u can find the Desk Version of the Clip:  <a target="_blank" href="https://makerworld.com/en/models/423769#profileId-327023" rel="nofollow noopener">https://makerworld.com/en/models/423769#profileId-327023</a>&nbsp;&nbsp;THE ULTIMATIVE HOOK → CARBUDDY!! <a target="_blank" href="https://makerworld.com/en/models/425555#profileId-329178" rel="nofollow noopener">https://makerworld.com/en/models/425555#profileId-329178</a>TrashBin - Nintendo Switch Holder - Can Holder and More with just 1 Hook!!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000421128/design/2024-04-12_8948006ddb168.png"></figure>&nbsp;&nbsp;Funny &#34;scent tree´s&#34; pendant  <a target="_blank" href="https://makerworld.com/en/models/420970#profileId-323754" rel="nofollow noopener">https://makerworld.com/en/models/420970#profileId-323754</a> Multi CarClip: <a target="_blank" href="https://makerworld.com/en/models/420980#profileId-323752" rel="nofollow noopener">https://makerworld.com/en/models/420980#profileId-323752</a>&nbsp;Visit my other Model <a target="_blank" href="https://makerworld.com/en/@RealNationPrint/collections" rel="nofollow noopener">https://makerworld.com/en/@RealNationPrint/collections</a>  I&#39;d appreciate a like/follow and further support! Thank you Wanna buy me a coffee for my good work? <a target="_blank" href="https://www.paypal.me/Realmascha" rel="nofollow noopener">https://www.paypal.me/Realmascha</a>

Cockpit Phone Holder Clip v1

Car Prints

hYPERfOCUS

<h2>Rocket Bowling</h2><h3>Like regular bowling but with ROCKETS!</h3><h4>Designed by hYPER fOCUS (that&#39;s me) - exclusively on Maker World.</h4>&nbsp;This fun and dynamic game includes a launcher with three rockets, 10 bowling pins, and a pin setting device for easy setup allowing you to set 10 pins perfectly in just a couple of seconds. You can play by yourself, or with many players. The rules can be the same as regular 10 pin bowling, or you can make up your own rules.&nbsp;The launcher can fire the rockets 20 meters, so you can set the pins nice and far away. 2-3 meters is ideal. The launch tube is aimable, and the launch button can deliver variable amounts of force.&nbsp;If you print two sets, players can sit opposite one another aiming at each others pins. (wear glasses or something, safety first.)&nbsp;I designed this game a few months ago in collaboration with my 5yrold son. Combining the concepts of bowling, with rockets. Because everything is more fun with rockets! We&#39;ve been experimenting with it for a while and having a great time.&nbsp;I get a huge amount of satisfaction hearing feedback from people whose lives are improved (even only a little bit) by my designs. I looking forward to putting Rocket Bowling out into the world and hearing stories of the fun you all have.&nbsp;<h2>ENJOY!!!</h2>Multicolour - my design philosophy when it comes to multi colour printing is to use a minimum number of colours and colour changes. Just enough to give the models some character, but without purging our lives away. I think there are a total of 7 or 8 colour changes for all build plates. But you also don&#39;t need multi-colour to enjoy the game.&nbsp;Support - Designed to be printed without any support at all.&nbsp;Infill - The pins use lightning infill to save a huge amount of filament&nbsp;Brims - Some of the models benefit from having brims. Especially pins and rockets. The last thing you want is to score a strike before the print is finished.&nbsp;Pin Setter - The biggest problem with manual bowling games is resetting the pins without knocking them over, and getting them nicely aligned seems to be impossible. The pin setter I&#39;ve design and included allows you to drop pins in upside down, pull the handles apart, place the pins and left the pin setters up. This means you can perfectly set pins in just a few seconds, taking the headache out of table top bowling games.&nbsp;Here is a score sheet you can print out to keep track of scores&nbsp;Standard Rules: Each pin that is knocked over scores 1 point.You have two launches per “frame” (or turn)Your score for the frame (or turn) is how many pins you knocked over.&nbsp;When you knock all ten pins down, you have a chance to score bonus points. If you knock over all ten pins on your first launch, this is a “Strike”. If you knock over all ten pins on your second launch, this is called a “Spare”.<ul><li>STRIKE: This is when you knock over all ten pins on your first launch. You place an “X” in the frame and this is equal to ten points, PLUS the next two launches. If you score a Strike in the final frame, you get two more launches. </li><li>SPARE: This is when you knock over all ten pins on your second launch. Place a / next to the number of pins you knocked over on the first roll (For example &#34;6/&#34;). You score ten points, PLUS the number of pins you knock over on the next turn. If you hit a spare on the final frame, you have one more launch to add to your score.</li></ul>For more detail on how to keep score, this is a helpful video:<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=aBe71sD8o8c"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/aBe71sD8o8c" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;The maximum score is 300, this can be achieved if you score 12 strikes in a row.&nbsp;Here is a score sheet you can print out to keep track of scores<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000454203/design/2024-05-03_5c5e8b671fecb.jpg"></figure>

Rocket Bowling by hYPER - Fun bowling game.

Desk Games

鱼小兑

这是？我的世界！THIS IS MINECRAFT !可收纳小型零件，可组装的经验模块（自由决定数量）可选项：钻石镐、经验点、等级数字（现在只有一个数字）默认提供拓竹256mm可打印的版本，当然你可以选择剪切模型后放大打印（若放大请记住你的放大比例然后应用到所有打印模型上！）------------------------------主体分为两盘打印第一盘生命饱食度条需要黑色、棕色、白色、红色第二盘格子容器建议灰色打印完成插入组装（太紧打磨连接杆，太松加入胶水固定）------------------------------可选项配件（钻石镐：深青色、浅蓝色、深棕色、深黄色）（经验点：深绿色、浅绿色）（等级数字：黑色、浅绿色）但是我建议买点丙烯马克笔或者水性丙烯直接上色，毕竟凑齐这些颜色的耗材比较麻烦，所以我提供了第二个手动上色的版本薄涂多次即可（PS：我也是这么做的）钻石镐和等级数字是通过胶水固定已开源,f3d格式，使用fusion360建模，欢迎二创<figure class="image image_resized" style="width: 60.26%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000492643/design/2024-06-12_61105e7277a91.png"></figure>Storable Small Parts and Assemblable Experience Modules (Number of modules can be freely decided)Options: Diamond Pickaxe, Experience Points, Level Number (currently only one number available)A printable version of the Taketake 256mm model is provided by default. Of course, you can choose to cut the model and enlarge it for printing (if you enlarge it, remember your scale ratio and apply it to all printed models!).------------------------------The main body is printed in two plates:First plate: Health and Hunger Bar needs black, brown, white, and red. Second plate: Grid Container is recommended to be gray.After printing, insert and assemble (if too tight, sand the connecting rods; if too loose, add glue to secure).------------------------------Optional Accessories (Diamond Pickaxe: dark cyan, light blue, dark brown, dark yellow) (Experience Points: dark green, light green) (Level Number: black, light green)However, I suggest buying some markers or water-based acrylic paint to color them directly, as it&#39;s quite troublesome to gather all these colors of filament. Therefore, I provided a second version for manual coloring.Apply thin coats multiple times.The Diamond Pickaxe and Level Numbers are fixed with glue.Open source, in f3d format, modeled with Fusion 360, creative modifications are welcome.

Minecraft物品栏|Inventory

Minecraft

达文西FPV

关节可活动，没有使用支撑，目前只有单色，以后可能会出多色，暂时没有好的多色方案，大家有好的想法可以留言!直接打印只需要2个小时左右，但是为了顶部曲面打印效果更好，我调整了自适应层高，打印时间就会增加到4个小时左右，放大或者缩小后效果会消失，需要重新调整，我试过最小50%打印，关节也可以自由活动！<ul><li>Joints can be moved, without the use of support, only monochrome at present, there may be multi-color in the future, there is no good multi-color scheme for the time being, everyone has a good idea can leave a message!</li><li>Direct printing only takes about 2 hours, but in order to print the top surface better, I adjusted the adaptive layer height, Print time will increase to 4 hours or so, zoom in or out after the effect will disappear, need to re-adjust, I tried a minimum of 50% print, The joints are free to move!</li><li><a target="_blank" href="https://www.bilibili.com/video/BV12M4m1C7Hh/?spm_id_from=333.999.0.0&amp;vd_source=2089e59f0ea7f6d627e58ab3197c5395" rel="nofollow noopener">最新3D打印宫崎骏《龙猫巴士》_哔哩哔哩_bilibili</a></li></ul><figure class="media"><oembed url="https://www.bilibili.com/video/BV12M4m1C7Hh/?spm_id_from=333.999.0.0&amp;vd_source=2089e59f0ea7f6d627e58ab3197c5395"></oembed></figure><a target="_blank" href="https://www.douyin.com/user/self?modal_id=7369237370975096118" rel="nofollow noopener">达文西FPV的抖音 - 抖音 (douyin.com)</a>

My Neighbor Totoro Bus龙猫巴士

Studio Ghibli

Travis

I&#39;m a big fan of the Fallout game series. The latest release of Amazon&#39;s Fallout series energized the nerd inside of me to create this bit of my very own Vault-tec Pip-Boy techiness to dress-up my Apple Series 7 Watch (45mm).&nbsp;I included pics of the process to install the buttons and insert the button-side of the watch into the Pip-Boy before snapping the rest of the face onto the watch. The included print profiles include snug supports for a few overhanging areas and those are quick and easy to remove without needing tools. Please note that one profile is for a standard 0.4mm nozzle while the other is for a 0.2mm nozzle. The 0.2mm nozzle print profile includes updated tolerances for the supports since they need to be smaller to accommodate the .22mm layer width and 0.1mm layer height.&nbsp;Enjoy and let me know what you think.&nbsp;I used the Facer app for the Pip-Boy screen: <a target="_blank" href="https://apps.apple.com/us/app/watch-faces-by-facer/id1057071179" rel="nofollow noopener">https://apps.apple.com/us/app/watch-faces-by-facer/id1057071179</a>!!! ULTRA version here: <a target="_blank" href="https://makerworld.com/en/models/477933#profileId-389029" rel="nofollow noopener">https://makerworld.com/en/models/477933#profileId-389029</a><h4>You can try uniformly scaling the entire model (with buttons and knobs selected) to the following percentages based on your watch size:</h4><ol><li>44mm: scale to 97.77%</li><li>42mm: scale to 93.33%</li><li>41mm: scale to 91.11%</li><li>40mm: scale to 88.88%</li><li>38mm: scale to 84.44%</li></ol>EDIT: 5/1/2024I uploaded a 44mm version that should fit the Apple Watch SE quite nicely and added two new print profiles to support it. One profile is for a 0.4mm nozzle and the other is for a 0.2mm nozzle, specifically on an A1 mini, but should work on other Bambu Lab printers.&nbsp;EDIT: 5/6/2024I created a version 2 that includes knobs, by popular request.  The knobs have a small amount of threading to keep them firmly attached.&nbsp;EDIT: 5/20/2024I added a new print profile with the version 2 model scaled according to the chart from above.  The print profile is the “38mm to 45mm v2” and there&#39;s a profile for a 0.4mm nozzle (default nozzle size on Bambu printers) and the 0.2mm nozzle for those of us playing with finer detail.

Pip-Boy for Apple Watch

Fallout

3DPrintable.art

<figure class="table"><table style="border:0px solid rgb(179, 179, 179);"><tbody><tr><td style="border:0px solid rgb(255, 255, 255);padding:0.4em;"><h2>Please read these instructions before printing!</h2></td></tr></tbody></table></figure>These adorable voodoo toys come in two variants: one with a sad expression and the other with a cheerful smile. They make perfect gifts or decorative items and have movable arms and heads.&nbsp;While the provided multi-color print demonstrates one coloring option, it took 4 days to complete with a 0.16 layer height. You have endless possibilities for coloring and <a target="_blank" href="https://wiki.bambulab.com/en/software/bambu-studio/multi-color-printing" rel="nofollow noopener">experimenting with different colors</a>. Get creative and share your results!&nbsp;Don't be scared but printing this model will require some form of support. It's easier to print it lying down, but you might be able to print more toys simultaneously while standing.<figure class="table" style="width:919.672px;"><table class="ck-table-resized" style="border:0px solid rgb(255, 255, 255);"><colgroup><col><col></colgroup><tbody><tr><td style="border:0px solid rgb(255, 255, 255);padding:0.4em;"><figure class="image image_resized" style="width:58.05%;"><img src="https://makerworld.bblmw.com/makerworld/draft/396613/2024-01-07_5d0b1f6f64bcb.png"></figure><figure class="image image_resized" style="width:58.27%;"><img src="https://makerworld.bblmw.com/makerworld/draft/396613/2024-01-06_c2821558f89f1.png"></figure></td><td style="border:0px solid rgb(255, 255, 255);padding:0.4em;">Examples of finished prints with supports. As you can see, the model is surrounded by these weird structures, which are called supports.&nbsp;Support structures are used to support overhanging geometries and need to be removed once printing is over.&nbsp;There are <a target="_blank" href="https://www.google.com/search?q=How+to+remove+support+structure+from+3D+prints" rel="nofollow noopener">multiple guides online</a> that will teach you how to use and remove supports, but it might be helpful to use some of these tools:<figure class="image image_resized" style="width:316.688px;"><img src="https://makerworld.bblmw.com/makerworld/draft/396613/2024-01-06_3aba5e239a66c.png"></figure>&nbsp;Please avoid applying excessive force by hand, as it might break the printed object. Be patient to achieve the highest possible quality.&nbsp;Bambu Lab also has a great <a target="_blank" href="https://wiki.bambulab.com/en/software/bambu-studio/support" rel="nofollow noopener">wiki article</a> that explains how you can use different support settings. If you find a better support configuration, please share your print profile.</td></tr></tbody></table></figure>For a perfectly smooth surface, you can use a different <a target="_blank" href="https://wiki.bambulab.com/en/software/bambu-studio/layer-height#effect-of-layer-height" rel="nofollow noopener">layer height</a> (0.16 for example) or experiment with<a target="_blank" href="https://wiki.bambulab.com/en/software/bambu-studio/adaptive-layer-height" rel="nofollow noopener"> variable layer heights</a>. In any case, expect the printing time to increase significantly, especially for multi-color prints.<figure class="table"><table style="border:0px solid rgb(179, 179, 179);"><tbody><tr><td style="border:0px solid rgb(191, 191, 191);padding:0.4em;">To <a target="_blank" href="https://wiki.bambulab.com/en/software/bambu-studio/reduce-wasting-during-filament-change" rel="nofollow noopener">minimize filament waste</a>, we strongly recommend printing multiple objects simultaneously.&nbsp;The provided print profiles are merely suggestions, and when selecting different colors, please ensure that you update the <a target="_blank" href="https://wiki.bambulab.com/en/software/bambu-studio/reduce-wasting-during-filament-change#auto-calc-flushing-volumes" rel="nofollow noopener">flushing volumes</a> to prevent any unexpected color mixing.</td><td style="border:0px solid rgb(191, 191, 191);padding:0.4em;"><figure class="image image_resized" style="width:78.91%;"><img src="https://makerworld.bblmw.com/makerworld/draft/396613/2024-01-06_500fdaa4282.png"></figure></td></tr></tbody></table></figure><figure class="table"><table style="border:0px solid rgb(255, 255, 255);"><tbody><tr><td style="border:0px solid rgb(255, 255, 255);padding:0.4em;"><figure class="image image_resized" style="width:72.32%;"><img src="https://makerworld.bblmw.com/makerworld/draft/396613/2024-01-06_4c5094fc8f382.png"></figure></td><td style="border:0px solid rgb(255, 255, 255);padding:0.4em;">If you want to create your own print profile, please note that the neck is typically the weakest spot. It is recommended to reinforce it with a higher infill or additional wall loops.&nbsp;This should prevent it from breaking easily when removing supports or playing with the toy.</td></tr></tbody></table></figure>&nbsp;COMMERCIAL LICENSE AVAILABLE: <a target="_blank" href="https://patreon.com/3DPA" rel="nofollow noopener">https://patreon.com/3DPA</a>&nbsp;Check out <a target="_blank" href="https://makerworld.com/en/u/943536974" rel="nofollow noopener">our other models</a>. Your likes and downloads support more content.&nbsp;Happy printing!&nbsp;

Cute Articulated Voodoo Toy (print-in-place)

Articulated

ozarkexpeditions

<h2>Brick Your Name - Customize on MakerWorld!</h2>Get ready to personalize your world with Brick Your Name! This fun and interactive tool lets you design your very own brand-compatible baseplates with custom names. Try this comprehensive baseplate name designer on MakerWorld, we&#39;re excited to see the unique creations you&#39;ll bring to life. Using the easy SCAD generator, you can craft vibrant and personalized baseplates perfect for any hobbyist, maker, or brick enthusiast. Whether you&#39;re enhancing your collection or creating a one-of-a-kind gift, Brick Your Name adds a delightful touch of creativity to all your projects.<blockquote>📢 New! Sell physical prints of any of my designs by joining my new <a target="_blank" href="https://www.patreon.com/Ozarkexpeditions" rel="nofollow noopener">Patreon </a>subscription and support more great future designs!</blockquote>Create them for your family, friends, businesses, workshops, and more!<figure class="image image_resized" style="width: 49.51%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000492674/design/2024-06-11_6fa0ce3819af3.png"></figure><blockquote>📢 Custom stands coming soon - we will have various options to display your themed name plates in style.</blockquote><blockquote>📝 Long loading times - High-resolution cylinder generation may cause brief delays in nameplate rendering.  </blockquote><h3>Steps to Create Your Custom Brick Baseplate</h3>1 - Enter Your Name - In the &#34;name&#34; field, type in the text you want to appear on your baseplate. Capital letters work best for a clear and bold design. For example, type &#34;MAKER&#34;.2 - Choose Your Font Select a font from the dropdown menu that suits your style. There are several to choose from and try out.3 - Adjust Settings Use the sliders to set the height, weight, spacing, and alignment of your text. Adjust &#34;textHeight,&#34; &#34;textWeight,&#34; &#34;letterSpacing,&#34; &#34;xAdjust,&#34; and &#34;yAdjust&#34; to fine-tune your model. Adjusting these values can make the baseplate look amazing. You want to try to avoid making little slices of studs, if possible, especially around the outside edges.  📢 The advance settings allow you to make printer specific adjustments. For example, If you&#39;ve printing bricks from the <a target="_blank" href="https://makerworld.com/en/models/479021" rel="nofollow noopener">Ultimate Brick Customizer</a>, then I would recommend leaving the stud rescale to 1.0 or with name brand bricks, adjust the stud rescale to 1.05 for a snug fit. Consider printing a small example to ensure you have the correct scale that matched your printers&#39; tolerances for name-brand bricks.   4 - Generate Your Model Once all adjustments are made, click the &#34;Generate&#34; button to create your custom baseplate model. This will render a preview of your design.5 - Download Your Model After generating the model, click the &#34;Download&#34; button to save your design. You can now print or share your custom brick baseplate. Please consider printing from the 3MF file for the best results!  Enjoy customizing and building!&nbsp;Important NoteThis customizable model is designed for personal and educational use and not for commercial reproduction or sale under these brand name trademarks.&nbsp;Feedback WelcomeI hope you enjoy using this customizable brick generator. Your feedback is invaluable, so please let me know if you have any suggestions or improvements. Together, we can make the MakerWorld platform even better! If you&#39;d like to inspire us to make more fun toys and games, give us a 🚀, a 👍, and share!  Explore More of Our Models! <a target="_blank" href="https://makerworld.com/en/models/463568" rel="nofollow noopener"><img class="image_resized" style="width: 24.05%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000492674/design/2024-05-13_0d1f6d3fca672.png"></a><a target="_blank" href="https://makerworld.com/en/models/452361" rel="nofollow noopener"><img class="image_resized" style="width: 21%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000492674/design/2024-05-03_52b9e8ccc8501.gif"></a><a target="_blank" href="https://makerworld.com/en/models/390175" rel="nofollow noopener"><img class="image_resized" style="width: 24.86%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000492674/design/2024-03-23_20f08dbba5d8e.gif"></a><a target="_blank" href="https://makerworld.com/en/models/479021#profileId-390315" rel="nofollow noopener"><img class="image_resized" style="width: 23.75%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000492674/design/2024-05-31_320e7b7015e68.png"></a>

Brick Your Name - Customize on MakerWorld!

Personalize

Williams Industries

If printing as a sign, it can be used with my desk buddy stand <a target="_blank" href="https://makerworld.com/en/models/80177#profileId-178576" rel="nofollow noopener">HERE</a> Or, you can use <a target="_blank" href="https://amzn.to/49nkrP3" rel="nofollow noopener">THIS</a> to adhere to your walls. (affiliate link)&nbsp;We have a lot of great stuff over at the Patreon: <a target="_blank" href="https://www.patreon.com/WilliamsIndustries" rel="nofollow noopener">https://www.patreon.com/WilliamsIndustries</a>&nbsp;We release about 30 files a month. Patreon membership includes commercial use on all prints.<figure class="image"><a href="https://patreon.com/WilliamsIndustries?utm_medium=unknown&amp;utm_source=join_link&amp;utm_campaign=creatorshare_creator&amp;utm_content=copyLink" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000490188/design/2024-03-13_967b85ee2294b8.png"></a></figure>&nbsp;