Jsayers76

DesignCraft

This model widens one side of the spool ring adapter to stabilize a ATARAXIA ART 1kg 197x61mm cardboard spool while it rotates within a Bambu Lab AMS.&nbsp;Features:<ul><li>Reusable</li><li>ATARAXIA nameplate for easy identification when reusing</li></ul>Instructions:<ul><li>Measure your spool first to ensure it matches the specified dimensions.</li><li>Print one of each model for a single spool.</li><li>Affix the wide spool ring adapter on the right-hand side of the ATARAXIA ART spool if you're facing the AMS.</li><li>See attached photos.</li></ul>Considerations:<ul><li>Print Material: Please print with a basic PLA or PETG to minimize any shrinkage.</li><li>Too Tight? Too Loose? Cardboard expands with humidity and contracts when dried. A cardboard spool that has absorbed too much moisture may cause the adapters to fit very tight. Placing the spool in a filament dryer, such as the SUNLU S2, for a bit should resolve this. Note, you should not dry the spool with the adapters attached as they can warp in the heat. Keep in mind that after a long drying session the adapters may fit too loose. This should resolve itself shortly as the cardboard reabsorbs some moisture from the air.</li><li>AMS Lid Doesn't Close? All of the spool adapters I make are less than the official AMS spool clearance limit of 202mm, as specified on the official AMS product page, and as tested within my own AMS. However, some people have stated their spools are rubbing against the lid with the adapters attached. It's hard to say what's causing this since I cannot reproduce the issue myself, however, I've created an <a target="_blank" href="https://makerworld.com/en/models/33133" rel="nofollow noopener">AMS Lid Riser</a> which allows you to keep your AMS lid closed while providing additional clearance for larger filament spools. It's a quick and easy print which you can find on <a target="_blank" href="https://makerworld.com/en/u/243407759" rel="nofollow noopener">my profile</a> or directly here: <a target="_blank" href="https://makerworld.com/en/models/33133" rel="nofollow noopener">https://makerworld.com/en/models/33133</a></li></ul>

ATARAXIA ART Bambu Lab AMS Cardboard Spool Adapter Ring

Spool Adapters

Williams Industries

I always wanted to be on this show as a kid, luckily 3D printing helps make part of your dreams come true :) This is a remix from <a target="_blank" href="https://cults3d.com/en/users/ascott4680" rel="nofollow noopener">ascott4680</a>. I have added the alternate base with the yellow stripes, color logo, and holes in the back to add light.&nbsp;There are 8 plates with the various printing options so be sure to select the ones you want for whichever part you are printing. I added the hole in Bambu Studio so you can modify it easily depending on what kind of electronics you want to add to make it light up. I also added the base options without a hole if you do not care to add lights. For the logo, just print it and glue it on the front face.&nbsp;See video with the lights on <a target="_blank" href="https://www.fb.watch/pKCo1eO_9c/" rel="nofollow noopener">HERE</a>&nbsp;We have a lot of great stuff over at the Patreon: <a target="_blank" href="https://www.patreon.com/WilliamsIndustries" rel="nofollow noopener">https://www.patreon.com/WilliamsIndustries</a>&nbsp;Patreon includes commercial use on all prints.

Spool Adapters

Cool prints