JoshD4PREZ

dave3ddiy

This is a design to help organize and store 5 inch sanding disks in your workshop.The grooves are cut with a standard table saw blade width. Depth of the groove should be slightly deeper then 1/8th of an inch. I recommend the spacing of the grooves to be 1 inch apart. One could go even further and do half inch. Pictured is 2 inches and doesn't offer a huge range of flexibility. Cut the grooves first on one sheet before ripping them for the wall. This way it aligns to all three pieces of the wall.The three walls are cut at 5.25 in wide by however tall you like it to be. I used 1/2 inch plywood but it won't really matter if you use 3/4 as long as the inside width is 5.25. So when you assemble the back wall is sandwiched between the walls. So the inside depth is not as deep as it is wide.The included STL's is a drawer, Dividers and a organizer for detail sanding sticks that you can find here. https://www.amazon.com/Oskool-Detail-Sanding-sanding-sticks/dp/B08NJ4VRKZ/ref=sr\_1\_8?dchild=1&keywords=sanding+sticks&qid=1610465212&sr=8-8The Handles in the project was not an original design. Credit is below to the original designer. The handle I used in my photograph was the Medium. I included a large in case. Anyone wants to go larger. <a href="https://www.thingiverse.com/thing:4619895" rel="nofollow">https://www.thingiverse.com/thing:4619895</a><h3> Print Settings</h3>Printer Brand:PrusaPrinter: <div>I3 MK3S</div>Rafts:NoSupports: <div>No</div>Resolution:.2Infill: <div>15</div> Filament: Prusament PLA MultiCategory: Tools

Modular Sandpaper Holder

Sanding

Timo.S

Small French-Cleat Holder with a Borehole for a M4 Srew.30mm x 48mm and 18 mm thick.The Borehole is the middle of the Holder.&nbsp;Added a Version for a 4,5mm Woodsrew.&nbsp;

French Cleat Holder

French Cleat

Diablotin341

Hi, its just a simple hook for the aluminium profile on the side of the packout

Milwaukee Packout hook

Packout

Luckyboy

For everyone who needs just a simple hook.Inner diameter is 20mm and 25mmOverall length is 71.5mmWall width is 2.5mmHeight 5mmIt was strong enough for a small pan

Kitchen Tool Hook

Tools & Such

Mr.B

This is a very small solder spool like the ones that come with the USB-Soldering-Iron: Parkside PLKA 4 B3.&nbsp;Very fast and solid print. I designed a little insert hole for the solder so you can refill the spools very easy and fast.Ater printing I super-glued both parts together with a tiny little drop. The layer adhesion of both parts is very well even without glue, but I recommend to use some. I marked the insert hole with red spray paint. It is not necessary but it is easier to find the hole again :-)&nbsp;Printed in Sunlu PLA+ Black&nbsp;If you want you can print a lot of these, fill them up and build a solder pyramid :-) Sorry just kidding !!!

Small Solder Spool - Parkside

Spools

shoooo

Optimized for ease of printing and assembly. The main body prints in one piece with supports to clear for the slot for the gates. Gates come in two pieces; the bottom piece can be bolted (m4 bolts) or glued on after you slot it in the gate.&nbsp;Gate slots are sized so a ¼" chisel makes very quick work of cleaning out the supports.&nbsp;Print with snug supports (see pics for what you end up with). PETG or ABS recommended, probably 4+ wall layers for strength. Printed mine with PETG.

2- and 3-way splitter with blast gates for 2 1/4" shop vac (Ridgid)

Dust Collection 

spyder007

5x1 Wall mount baseplate with 6x2mm magnet holes.

Gridfinity 5x1 Wall Mount Baseplate

Gridfinity

Jailbreaker07

Mit dieser Frässchablone lassen sich Rundungen mit den Radien von 10 mm bis 40 mm mit der Oberfräse fräsen. Das Grundelement muss nur 1X gedruckt werden, in diesen werden die einzelnen Radien Schablone rein geschraubt. Befestigt wird die Frässchablone mit den Wofcraft Klammern und den passenden Aufsätzen von thingiverse.Benötigte Teile:&nbsp;2x wolfcraft Mini-Einhandzwingen 34551002x Senkkopfschrauben M4x102x Rutex Gewindeeinsätze M4x8,12x <a target="_blank" href="https://www.thingiverse.com/thing:4645620" rel="nofollow noopener">https://www.thingiverse.com/thing:4645620</a>&nbsp;ACHTUNG: Das Druckprofil nutzt den PETG/PLA-Trick, um eine glatte Schnittstelle zwischen dem Bauteil und den Stützen zu erhalten!&nbsp;&nbsp;With this milling template, curves with radii of 5mm to 40mm can be milled with the router. The basic element only needs to be printed once and the individual radii templates are screwed into this. The milling template is attached with the Wofcraft clamps and the matching attachments from thingiverse.Required parts:2x wolfcraft mini one-hand clamps 34551002x countersunk screws M4x102x Rutex thread inserts M4x8.12x https://www.thingiverse.com/thing:4645620&nbsp;ATTENTION: The print profile uses the PETG/PLA trick to get a smooth interface between the component and the supports!

Ecken-Frässchablone (Radius Milling Set Metric)

Router

MakerVerse Designs

<h2>Updated Version available (V4):</h2><h3><a target="_blank" href="https://makerworld.com/en/models/485576#profileId-398072" rel="nofollow noopener">https://makerworld.com/en/models/485576#profileId-398072</a></h3>---------------------------------------------------------------------------------------------------------------A print-in-place slim wallet that offers space for 7 cards and a drawer for cash. I looked for a long time for a wallet that had enough space for cash, but I couldn&#39;t find one so I made this one myself.  This ist the Updated Version of Slim Wallet (V2)<ul><li>Now its print-in-place so you have to print only two parts and dont have to stop the print</li><li>I added a lever to securely open and lock the cards so that they don&#39;t fall out</li><li>I reworked the drawer mechanism so that it lasts better</li></ul>Have fun with it and leave a like or subscribe if you like it!If there are any suggestions for improvement, feel free to write a comment.

Slim Wallet (V3) - print in place

Electronics

angrelou

update 02/11/2024I uploaded a new model witch solves the problem of the hook breaking when force is applied.Thanks you all for your comments, making this model better for everyone. Download the V 2.0 &nbsp;Lately, I&#39;ve noticed that they always upload the same STL file to all platforms and always encounter the same problem.I took it upon myself to design a new case that solves the issue all previous models had, which is that they all open too easily.After several failed attempts, I finally managed to make everything fit perfectly without the need for supports.At the moment, i only created 3 models, but i will be uploading more models soonEnjoy the 3D printAs always, have fun, and I&#39;ll be uploading more things soon.(I recommend using pla+)If you liked the design, check out my profile and subscribe, you won&#39;t regret it.

Toothbrush Travel Case

Home

YogiTech

Small print in place box/container for carrying jewelry, rolling cigarettes&#39; or anything else that fits. Has a hinge that can be printed in place and a snap locking mechanism. &nbsp;Bridging is involved you could print without supports.Print in this orientation: <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000038255/design/2023-10-10_ycpgwbr1sa6o.jpg">

Box - small and print in place

Boxes & Storage

apex3D

After getting tired that all plastic scrapers are done after one use I finally decided to use metal scraper that came with the machine. however I did not particularly like the design of the original scraper BambuLab provides on microSD card/website - see model <a target="_blank" href="https://wiki.bambulab.com/en/knowledge-sharing/Links-to-STL-models" rel="nofollow noopener">here</a>.&nbsp;I decided to model my own which was inspired by Wera tools I love. It is nice design which fits really well into your hand.&nbsp;UPDATE (2024-03-08)As requested by some I made a <a target="_blank" href="https://makerworld.com/en/models/237518#profileId-253541" rel="nofollow noopener">stand</a> that fits my design… &nbsp;UPDATE V2 (2024-02-03)Based on the feedback from community here and some more though into the design I modeled V2 of the scraper.Also you can find info at the bottom how to use it to avoid damage to your plates.<ul><li>Improved geometry at the bottom</li><li>Tweaked dimensions of finger rest and added indented arrow to prevent wrong orientation</li><li>Added logo to both sides (AMS version only)</li><li>Increased layers for logo for AMS version (to prevent color bleed)</li><li>Lowered indent for magnet so it protrudes just tiny bit (stronger magnet force)</li></ul><figure class="image image_resized" style="width:29.94%;"><img src="https://makerworld.bblmw.com/makerworld/draft/662366/2024-02-03_d4a9546ae3269.jpg"><figcaption>Improved design + indented arrow</figcaption></figure>And there is one more thing… I also created honeycomb ultralight and hopefully very cool and stylish version! <a target="_blank" href="https://makerworld.com/en/models/169754" rel="nofollow noopener">check it out!</a>&nbsp;FEATURES<ul><li>Cool Wera design</li><li>Easy to print an assemble (no more confusing where does the part go from the original model…)</li><li>No supports, flawless print</li><li>Hole so you can hang it if you wish</li><li>Dedicated space for the magnet</li></ul>&nbsp;WHAT DO YOU NEED?Well nothing! You should have everything already when you purchased your printer.<ul><li>18g of material (PLA is just fine)</li><li>2x screws for scraper</li><li>Blade</li><li>1x magnet (optional)</li></ul>HOW TO USE IT?As the original model also this one can be used from both side, but it shouldn't! I was thinking about poko yoke solution, but that would hinder its functionally so here is an example how to use it. On top of that I added arrow to the part where fingers rest to make it more obvious.&nbsp;<figure class="image image_resized" style="width:65.31%;"><img src="https://makerworld.bblmw.com/makerworld/draft/662366/2024-02-03_b4d2d3df686c2.jpg"></figure>I would not recommend using this scraper of textured plates and would be very very cautions on smooth PEI to. I think it is ideal for cool plate, but could not find any information from BambuLab regarding the use case, so that is only my opinion…&nbsp;&nbsp;&nbsp;&nbsp;