Jord

Fabian3Dprint

Model This model is for mounting a kitchen scale to a wall or underside of a cupboard. It can be used for kitchen scales with a thickness up to 14mm , you can choose the width when mounting to fit your scale. MeasurementsThe length of the model is 230mm, this includes a stopper of 3mm thick.&nbsp;In the files you can find versions of a 3mm and a 5mm wall thickness. The 3mm version was more than enough to hold the weight of my scale, it saved me some filament, but feel free to use the 5mm if you want the extra security.&nbsp;Mounting/Installing You can mount the holder in two ways:<ol><li>Using screws with a maximum width of 4mm, this ensures that you wont break the printed model as the holes are 5mm wide. The countersink holes will make sure that the screws don't damage your scale.</li><li>Using double sided tape, the model has a slot on the backside where you can place the tape. This way the seam between the holder and surface will be minimal</li></ol>If you have any questions about the model or if you would like a customized version, please feel free to contact me!

Kitchen Scale Holder

Tools / Useful Things

Asen

Replacement for the stander feed-through on the eSun ebox so that the 4mm PTFE from Bambu can be used.&nbsp;Suppport is necessary to remove the support structure between the surfaces, I recommend using a small slotted screwdriver so you can simply push it out.

eSun eBox adapter PTFE 4mm

3D Printer

253Bigfoot

These are a copy of the MaxTrax MKII traction boards, for 1/10 scale crawlers. 145mm long X 42.5mm large X 6mm high.

1/10 Scale Sand Rail Traction Board Scx10

RC and Crawlers

DynaMight

This will work on vintage Tamiya buggies like Grasshopper, Hornet, Grasshopper II, Wild One and many many others.&nbsp;This is a small remix of the 12mm Hex converter by Engineer6. I found it binded around the axle when tightening up the rear wheel so added a small lip (same design as the original adaptor), which gets pushed against the bearing rather than the axle casing and leaves some tolerance.&nbsp;Added another version which is 1mm longer as I found when this was fitted to my Wild One, it was too narrow and caused the wheel to bind on the rear shock.&nbsp;Original works good on the Hornet, +1mm works good on the Wild One. Not personally tried it on other Tamiyas.It now works perfectly and the wheels spin totally free even when tightened up quite a bit.<h3>Print Settings</h3>Printer Brand:CrealityPrinter: Ender 3Rafts:NoSupports: NoResolution:0.2mmInfill: 50%+Notes:I've been using PLA for well over a year without any issues.&nbsp;&nbsp;&nbsp;Category: R/C Vehicles

Tamiya 12mm Hex Converter

Tamiya

cmcguirk

this is to mount the Gerbing Controller with a top cover that is removable to give a better look and weathproof a bit

Gerbing Bluetooth Controller

Misc

agepbiz

<figure class="media"><oembed url="https://www.youtube.com/watch?v=6RgBXBwwXBg"></oembed></figure>&nbsp;edit: 04.03.24 added accessories - canvas top (separate print, no support needed)&nbsp;Print in place kit-card toy. Use a pair of flush cutters to separate the parts then assemble the toy. I have included both a single color version and a multicolor version. I wanted to do a project where I used several tools and machines to tie it all together into one project&nbsp;The Jeep Kit Card: <a target="_blank" href="https://makerworld.com/en/models/223303#profileId-241285" rel="nofollow noopener">https://makerworld.com/en/models/223303</a> The Trailer: <a target="_blank" href="https://makerworld.com/en/models/428258#profileId-332362" rel="nofollow noopener">https://makerworld.com/en/models/428258</a>The Gun:<a target="_blank" href="https://makerworld.com/en/models/469311#profileId-378676" rel="nofollow noopener">https://makerworld.com/en/models/469311</a>&nbsp;Subscribe or follow me on: Instagram: <a target="_blank" href="https://www.instagram.com/agepbiz/" rel="nofollow noopener">www.instagram.com/agepbiz</a> YouTube: <a target="_blank" href="https://www.youtube.com/user/agepbiz" rel="nofollow noopener">www.youtube.com/user/agepbiz</a> Twitter: <a target="_blank" href="https://twitter.com/agepbiz" rel="nofollow noopener">www.twitter.com/agepbiz</a>&nbsp;WARNING: CHOKING HAZARD - Small parts Not for children under 3 yrs.&nbsp;Printsettings: No support No raft 0,16mm layer height

Jeep Kit Card

Toys-Models