Johan501

BC Designs

My filament splitter, hence the name :)&nbsp;I wanted something smaller and light weight, and more robust than the experience I've had with other more famous splitters. My version keeps the filament path totally straight for the AMS to print head route, meaning less chance of snagging and less wear and tear for the most used (imo) operation.&nbsp;Externally fed filament is fed through the hole on the side, one less connector makes the model more sleek and I really dont think its needed.&nbsp;Requires 2 x PC4 M10 pneumatic connectors&nbsp;&nbsp;PrintingThe included 3mf file is setup ready to print @ 0.12 layer height with a tiny amount of supports for the hole which will be on the outgoing feed side. Supports are on build plate only.&nbsp;I've printed 6 or 7 of these now and had zero adhesion issues. With it being a small model the minimum layer time will naturally slow the print speed down which will also help here.&nbsp;Ignore the soon-to-be-added profiles promising faster print times, you want quality for this part to print well.&nbsp;&nbsp;FittingRemove the tiny support material and fit 2 PC4-M10 connectorsMake sure the PTFE tubing is pushed fully through the connector and into the internal recess.Attach to printer, note direction arrow for correct fitting.&nbsp;

mY Filament Splitter

3D Printer related stuff

quiXprints

Normandy from Mass Effect HueForge print! You can import this directly into Bambu, follow the instructions below, and print it! Please be sure to check your settings when you load the project if you need to change that preset at the top of Bambu Studio. Layer height should be 0.08 and first layer height should be 0.16mm and infill at 100%. &nbsp;You can create this without an AMS! You need to create a couple filament changes in the project before/while you slice the project. Of course if you have an AMS you can just select the filament at the appropriate layer height, if you are doing it manually, you would just know what color to load next. &nbsp;Once the settings are verified, slice the project (it will take a while) then look to the green layer timeline at the right of the preview screen. See assembly guide photo. You can drag the bottom plus up to change the individual layer preview for the next steps. For an AMS, right click at the following spots and change to the correct filament:&nbsp;Filaments Used:ASA PolyLite Black ASA PolyLite PolyMaker TealASA PolyLite Pop Pink ASA PolyLite White &nbsp;Swap Instructions:Start with BlackAt layer #5 (0.48mm) swap to PolyMaker TealAt layer #10 (0.88mm) swap to Pop PinkAt layer #16 (1.36mm) swap to White for the rest.&nbsp;You may have to re-slice the project after every filament change. These are all Polymaker ASA filaments. The HueForge program has all the transparencies loaded to get an accurate final product. I cannot guarantee the result using different filaments. If you have any questions, please let me know! Enjoy!

Mass Effect Normandy HueForge

Hueforge

ggiovinazzo

2024/06/17 (V2) <ul><li>Fixed an error that caused some open edges (slicer usually fixed the errors)</li><li>Customizer minor bugfixes for boolean checkboxes</li><li>Added new cellspan system, see below for further explanation </li></ul>&nbsp;Parametric Model of a Box with Separators.<figure class="table" style="height: 86.7812px; width: 812px"><table style="background-color: rgb(210, 210, 255); border: 1px groove rgb(190, 210, 220)"><tbody><tr><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em; text-align: center">If you like this model, please give a 👍And if you feel geneous, give me a boost .  Grazie Mille!</td></tr></tbody></table></figure>Feel free to comment if you have any suggestion or request to improve the model.&nbsp;The lid has been designed for an easy snap-on connection.The tolerance can be adjusted by modifying the parameters of the parametric model.&nbsp;If printing with a flow rate different from 1, it is a good idea to adjust the lid tolerance.&nbsp;The size of the box can be adjusted to your needs.&nbsp;I have also added the possibility to add &#34;watermarks&#34; for the separators on the lid, so the content of each compartment can be written on it.&nbsp;With the parametric model, you can decide either the internal or external size of the box, depending on whether you need a specific external size for the box or a specific size for internal storage.&nbsp;You can also decide how many dividers to generate horizontally and vertically.If you need no separators, the values can be set to 0 and no compartmentsYou can also decide how many dividers to generate horizontally and vertically.If you need no separators, the values can be set to 0 and no compartments will be generated.&nbsp;NEW Feature!Now span can be defined in customizer. To enable click in “span advanced” checkbox&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000476274/design/2024-06-18_768f4e3b3a67f.png"></figure>To define how span must be applied you must modify “span config” parameterEach block of span config (separated by - ) specify the following data:<ul><li>On which x-axis cell must begin the span</li><li>On which y-axis cell must begin the span</li><li>How many cells of horizontal span to apply</li><li>How many cells of vertical span to apply</li></ul>Using the example in the above image in a box of 4x3 cells the following span will be generated:&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000476274/design/2024-06-18_f133b9166d633.png"></figure>&nbsp;&nbsp;<figure class="table" style="width: 100%"><table class="ck-table-resized"><colgroup><col></colgroup><tbody><tr><td>If you like you can check my other parametric models:</td></tr></tbody></table></figure><h4>Parametric Connectable Text Sign</h4><a target="_blank" href="https://makerworld.com/en/models/483859#profileId-396143" rel="nofollow noopener">https://makerworld.com/en/models/483859#profileId-396143</a>&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000476274/design/2024-06-04_aef65c2701f83.png"><h4>Parametric soap-box with snap-on lid</h4><a target="_blank" href="https://makerworld.com/en/models/476276#profileId-387207" rel="nofollow noopener">https://makerworld.com/en/models/476276#profileId-387207</a>&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000476274/design/2024-06-04_95d316d97ebe2.png" alt="Parametric soap-box with snap-on lid">&nbsp;&nbsp;&nbsp;

Parametric box snap-on lid and customizable cells

OpenSCAD

EmaKralova

Very useful stand. The console is hard to flip. After raging few time it never fell. The ps4 is much colder 👍

PS4 stand

Gaming 

Asen

this is a small holder for the vacuum pump from the eSun kit with a place for a cap which can be attached to the multiboard.

eSun eVacuum Kit Multiboard Holder

Multiboard

SeaSpotter

I modified the original Decontaminator to use with the Bambulab A1 mini silicon brush, more reliable and robust than the brass brushes.I also modified the bucket to be smaller on the inner side to mount different Wago mounts.All you need is all print files (print in ASA or ABS best as it is close to the heatbed). The only thing you need to modify is the "spacer" to your desired size.I added 1, 2 and 3mm spacers but you can modify in your slicer to your desired needed size.For my Voron 2.4 the intermediate plate needs to be 2mm, but just adjust the height of this plate to your printer needs in your Slicer.BOM:4x M3x8 SHCS2x M3 T-Nuts4x 6x3mm magnets2x M3 Threaded Insert (M3x5x4 / Voron type)1x Bambulab A1 mini nozzle wiper (<a href="https://eu.store.bambulab.com/de/collections/accessories-for-a1-mini/products/heatbed-nozzle-wiper-a1-mini" rel="nofollow">https://eu.store.bambulab.com/de/collections/accessories-for-a1-mini/products/heatbed-nozzle-wiper-a1-mini</a>)

Voron 2.4 Purge Bucket Silicon Brush Wiper

Voron

neil3dprints

This was a collab with Bambu Labs. I was requested to design a Mouse Top Shell part that is compatible with the Wireless Mouse Components Kit-002 that is soon to be released. I have uploaded 3MF files and stl files for the four versions visible in the images.The Standard Version. the Batman Version, Bambu Labs Version and the Hexagon Version.&nbsp;This Outer Shell Mouse design is compatible with the mouse components kit 002.&nbsp;https://uk.store.bambulab.com/products/wireless-mouse-components-kit-002&nbsp;Please note to print the Batman and Bambu Labs Versions, a AMS unit will be required.&nbsp;If you would like to customize it, I have provided the STEP file for the standard version. Just import the STEP file into your modelling software of choice and customize away. This would also prove a great little project for those who are new to 3D modelling or would like to experiment with modelling software.If there is a logo or something similar you want to add to the mouse, you could always try converting the image of the logo into a SVG file and importing that into the modelling software and have one emboss or subtracted from the other.&nbsp;If you do customize the design, be sure to add your remix to Maker World and link it to this design. I'm looking forward to seeing how you all make this your own. :-)&nbsp;If you want to stay up to date with what I am working on, please check out my instagram or Twitter.<a target="_blank" href="https://www.instagram.com/neil3dprints/?hl=en" rel="nofollow noopener">https://www.instagram.com/neil3dprints/?hl=en</a><a target="_blank" href="https://twitter.com/NHengist" rel="nofollow noopener">https://twitter.com/NHengist</a>&nbsp;And any questions, just send me a DM.&nbsp;Happy Printing&nbsp;Neil&nbsp;

Customisable Mouse Top Shell Compatible with the Bambu Labs Wireless Mouse Components Kit-002

Electronics

Edward Felix

Edit 10/3/24: Updated the model and print profile so the overhangs print better and it will assemble easier. Moved the light from the sprue kit from the top to its own piece so it'll be more flat and fit into a wallet and pocket easier. ______&nbsp;Ever been stuck on an alien planet surrounded by Daleks? Well worry no more, with the Pocket TARDIS, you'll never be caught unawares again!&nbsp;This is a print in place kit card toy the size of a credit card! Keep it in your pocket or wallet for those times where you suddenly need an HO scale model of the 2024 TARDIS. Use a pair of model cutters to seperate out the pieces and simply slot together. The final model doesn't need glue to hold it together, although you may choose to use it if you want your kit to be extra strong.&nbsp;I have included a multicolour option, a single colour option, and a multi-colour option that doesn't have the kit card elements if you wish to make the model without having to cut it out. This model really needs to be printed with a very fine layer height to catch the panelling of the TARDIS. I recommend 0.08mm layer heights, or 0.04 if you want a smoother top. The model is optimised to minimise colour changes, with a 0.08mm layer height needing only 19 filament changes to get the full four colour model.&nbsp;I've included WAY too much detail on this model, so feel free to scale it up to get a very handsome TARDIS, although at a bigger scale the tolerances will fail a bit, and you will need to use glue to assemble.  Follow me on the socials to see more of my projects:twitter.com/MaskFelixinstagram.com/edwardmca&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/674573/2024-03-06_f54076bb10be8.jpg"></figure>(some of the prototypes when tuning the colours and print tolerances)

Pocket TARDIS - Kit Card - Doctor Who

Kit cards 

mlodybuk

All you need is 40x40x10 12v fan and female DC power socket. Between the housing and a fan you can put some kind of filter so less of the fumes will go out.

Soldering fume extractor

Soldering 

Makidev

This is a dust cover for USB type A ports.&nbsp;Note:I would recommend printing it in its original orientation (upright) because printing it on it's side will make the thin wall very fragile.&nbsp;UPDATES: 2024-02-11: I noticed in the makes pictures that my case's ports are deeper than some of your's, so I made “shorter” versions that are 5mm shorter.&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/639096/2024-01-28_c560550607c22.gif">

Dust cover for USB, HDMI and DP

Computer IT Stuff

apex3D

I designed poop chute which is slim and enclosed so it helps a bit with sound. Use 4 magnets to secure it.&nbsp;If you want low profile version which fits with the spool behind the machine, try this <a target="_blank" href="https://makerworld.com/en/models/107284#profileId-114595" rel="nofollow noopener">version</a>&nbsp;Features<ul><li>self-locating in both directions</li><li>no supports</li><li>only 71g</li><li>optimized profile for quality surface</li><li>notch to hide seam</li><li>pressfit magnets 6x3mm, no glue</li></ul>

BambuLab Poop Chute

K2_Kevin

USB SD Card Holder with Gridfinity<ul><li>22x USB Slots</li><li>19x MicroSD Slots</li></ul>&nbsp;☕️  If you would like custom design work, feel free to fill my coffee: <a target="_blank" href="https://www.paypal.com/paypalme/K2DesignLab" rel="nofollow noopener">PayPal</a>&nbsp;&nbsp;<a target="_blank" href="https://makerworld.com/en/models/129550#profileId-140448" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/439588/2024-01-22_13559f0b6f06a.png"></a>&nbsp;

USB / SD Card Holder - 2x2 Gridfinity

Gridfinity

YogiTech

Small print in place box/container for carrying jewelry, rolling cigarettes&#39; or anything else that fits. Has a hinge that can be printed in place and a snap locking mechanism. &nbsp;Bridging is involved you could print without supports.Print in this orientation: <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000038255/design/2023-10-10_ycpgwbr1sa6o.jpg">

Box - small and print in place

Print-in-place

B-Lab 3D

Finalmente ho trovato il modo per mettere in ordine le bobine ed averle a portata di mano. Per la stampa uso filamenti che sono li da tempo e che non mi servono più.Il bello di questo progetto è che non servono attrezzi, colle o altro per completare, devi solo incastrare i pezzi stampati.Su questo rack puoi mettere bobine da 1 KG o da 250 GR, non ho bobine da 2 KG quindi se ne hai e ci stanno fammelo sapere :) In questo momento sto aggiungendo il terzo piano in altezza e tutto è stabile! Ho lasciato anche i disegni <a target="_blank" href="https://www.autodesk.it/products/fusion-360/overview?term=1-YEAR&tab=subscription" rel="nofollow noopener">Fusion 360</a> per poter modificare come ti pare partendo da zero in base alle tue esigenze.Se sei neofita, o hai una stampante “economica” e usi filamenti di scarsa qualità potresti riscontrare problemi di tolleranza degli incastri. Ti consiglio di provare a fare un pezzo e se non va bene modificare il DXF dopo aver misurato con un calibro digitale i pezzi di prova.Guarda il video in descrizione per vedere come è facile incastrare il tuo nuovo rack. Buona stampa a tutti !!!<h2>Bambu Lab spools winder SIMPLIFIED: <a target="_blank" href="https://makerworld.com/it/models/17838#profileId-16584" rel="nofollow noopener">Bambu Lab spools winder SIMPLIFIED ! by B-Lab 3D - MakerWorld</a></h2><h2>consider this new project <a target="_blank" href="https://makerworld.com/en/models/210974#profileId-230802" rel="nofollow noopener">AMS Lite Spool Winder by B-Lab 3D - MakerWorld</a></h2><a target="_blank" href="https://www.youtube.com/watch?v=sffmO5EWOyg" rel="nofollow noopener">Filament Spool Rack - YouTube</a><figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=sffmO5EWOyg"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/sffmO5EWOyg" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Spools Desk Rack Modular

Spool Storage & Stuff

Bambu Lab

A1 mini test model - Swatch Display Board by Bambu Lab

Swatch Display Board by Bambu Lab

Calibration

AU3D

This hole gauge is designed to offer a quick and convenient method for measuring hole diameters ranging from 2mm to 20mm, divided into two ranges: 2-10mm and 11-20mm. Typically, a caliper would be the preferred tool for such measurements. However, this gauge proves useful in certain scenarios where a rapid estimation is required or in locations where the bulkiness of a caliper's head makes it impractical. While not a one-size-fits-all solution, its compactness allows for effortless storage and transport, making it an excellent backup to conventional calipers.&nbsp;You have the option to enhance the readability of the numbers by adding color post-printing using a Sharpie marker.<h3>Printing Instructions</h3>I would print this with a resolution as height as possible to reduce the stairstep effect. The print profile uses a layer height of .08mm<h3>Measurement Tools Collection</h3>I am constantly developing more measurement tools. Check out my entire <a target="_blank" href="https://makerworld.com/en/u/2942852598/collections/396042" rel="nofollow noopener">Measurement Tools collection here</a>.

Hole Diameter Gauge (2-20mm)

Tools

chemistinlab

OverviewThis stackable storage box is a print-in-place model and does not require additional hardware. Print the lid assembly and the box and follow the gluing instructions below to complete this model. Inside the box are different organizers that can be used for screws, electronics, or other accessories you may have.&nbsp;Available Sizes (See print profiles)<ul><li>4&#34; x 3&#34; x 1.5&#34; (small version)</li><li>8&#34; x 5&#34; x 1.5&#34; (large version)</li></ul><h4>Optional Accessories (See print profiles)</h4><ul><li>TPU gasket available in both sizes</li><li>Adjust gasket thickness by scaling the Z height in Bambu Studio.</li></ul>Materials and PrintingAny materials such as PLA or PETG will be suitable for this model.<ul><li>2-3 walls</li><li>10% gyroid infill</li><li>Tree support enabled (needed for the box)</li></ul>AssemblyRequired materials<ul><li>Lid</li><li>Box</li><li>Super glue, epoxy, or hot glue</li></ul>Instructions<ul><li>Follow the gluing instructions in the graphic</li><li>No tools are required.</li></ul><img src="https://makerworld.bblmw.com/makerworld/draft/791917/2024-01-14_977eeb4a2ee13.png">&nbsp;Check out other models<figure class="table" style="float:left;width:64.19%;"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td><a target="_blank" href="https://makerworld.com/en/models/173048" rel="nofollow noopener">Pill Shape Organizer</a>Print-in-place pill organizer</td><td><a target="_blank" href="https://makerworld.com/en/models/173556" rel="nofollow noopener">Pocket Sized Pill Case</a>3 day pill organizer</td></tr><tr><td><figure class="image image_resized" style="width:90.68%;"><a href="https://makerworld.com/en/models/173048" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/791917/2024-02-05_18709291beed2.png"></a></figure></td><td><figure class="image"><a href="https://makerworld.com/en/models/173556" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/791917/2024-02-05_099a37b7e6dd1.png"></a></figure></td></tr><tr><td><a target="_blank" href="https://makerworld.com/en/models/146492" rel="nofollow noopener">Mars Rover Desk Organizer Kit</a>Desktop decorative organizer</td><td><a target="_blank" href="https://makerworld.com/en/models/395814" rel="nofollow noopener">4 Way PTFE Splitter Adapter</a>AMS and external spool adapter</td></tr><tr><td><figure class="image"><a href="https://makerworld.com/en/models/146492" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/791917/2024-01-18_e76b4f736ca0c.jpg"></a></figure></td><td><figure class="image"><a href="https://makerworld.com/en/models/395814" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/791917/2024-03-25_898eeadc41d8d.png"></a></figure></td></tr></tbody></table></figure>&nbsp;

Stackable Organizing Box (No Screws)

Organizing

Wing-Art

The Cable Bundle Clip provides a convenient way to bundle and keep cables tidy. This innovative accessory is particularly suitable for office environments where efficient organization of connecting elements is crucial. For maximum flexibility, there are two options available: one with cable separation and one without, both for either adhesive or screw attachment:<ul><li>V1 without separation </li><li>V2 with separation for better cable allignment</li></ul>___&nbsp;Der Cable Bundle Clip bietet eine praktische Möglichkeit, Kabeln zu bündeln und sie ordentlich zu halten. Dieses innovative Zubehör ist besonders geeignet für Büroumgebungen, in denen die effiziente Organisation von Verbindungselementen von entscheidender Bedeutung ist. Für maximale Flexibilität stehen zwei Versionen zur Auswahl: eine mit Kabeltrennung und eine ohne, beide jeweils zum Kleben oder zum Schrauben:<ul><li>V1 ohne Trennung</li><li>V2 mit Trennung für bessere Kabelausrichtung</li></ul>&nbsp;

Cable Bundle Clip - Screw or Glue (Two Versions)

Cable Management

Tom Fullen - Switch

I know there are many of these of the Moon however, I wanted to create my own to learn how to make other planets and other potential spherical objects. This Moon globe seems to be more detailed to me and upon sharing a picture of my make to Reddit, a few people wanted me to share this so here it is! This has an 80mm opening on the base to set on a 10cm LED lighted puck. I purchased <a target="_blank" href="https://share.temu.com/qjOKfzsDJGA" rel="nofollow noopener">this one</a> for another project but it worked out great for this.&nbsp;<a href="https://makerworld.com/en/models/61976#profileId-64438" rel="nofollow">Check out my Mars Lamp for the BambuLab LED Light Kit here!</a>&nbsp;Print Settings:.20mm Layers6 Walls100% InfillNo Supports &nbsp;For information on the NASA SVS CGI Moon Elevation Maps I used visit https://svs.gsfc.nasa.gov/cgi-bin/details.cgi?aid=4720

SVS NASA Moon Globe

Stuff

高老板

适配宜家洞洞板吊装A1 mini的AMS lite,可以双色打印,也可以单色打印.注意: 目前版本仅适合放置你的 AMS lite , 因为我还没有解决 4Pin 供电延长线问题!!&nbsp;&nbsp;