JingleTurd84

HangarDesigns

This bushing is used to secure an acrylic rod (https://www.amazon.com/dp/B09SKYYS5X?ref=ppx_yo2ov_dt_b_product_details&th=1) into a 14mm hole with a 2 degree draft angle. The bushing is inserted with the draft angle out, therefore locking the bushing into the part. This is printed in TPU and was designed to provide a secure connection to the acrylic rod that has slight manufacturing diameter deviations. &nbsp;If you like this design, think about buying me a coffee (let's be honest- it's going towards filament)- https://www.buymeacoffee.com/thehangardesigns

TPU Bushing for Floating Logo Signs

Cool

Mirco at X1 CC

Darts Holder / Darts Rack, easy to print!

Darts Holder Darts Rack for soft and steel Darts

Hobbies 

cartyski

Struggling to open jars of all shapes and sizes? Say goodbye to stubborn lids with this jar opener designed to fit them all!

OPENSESAME3000 - Jar Tool

Household Devices

squinn

A handy tool to help with soldering, de-soldering, or other tasks where you need a steady third hand.  This is a fully printable design, so no other hardware is required.  The clamping mechanism can be adjusted to accommodate boards up to 20 cm in length, and can be installed facing either direction.&nbsp;All STLs are oriented as they should be for optimum printing, which have been designed with the layer lines in mind to result in a strong print (and no supports or brim should be required).

Adjustable PCB Holder Tool

Work?

Fatter

Dremel tool rack modified to fit a Dremel 4000 with hose. It probably also fits other models.

Dremel Tool Rack

Home Tools

ESPN8_TheOcho

I started off just wanting to make a quick and easy to print jig for getting my screw holes lined up to mount my DCB-112 Battery Charger. Then i decided to make it easier by printing the mount pegs and just screw into a stud. Then i figured i could make that same piece work on a slatwall or pegboard mount and this is the result. I then adjusted my model to accomodate the DCB-118 to make this item more universally applicable.&nbsp;So you can print the simple jig to hold up to your wall and just mark the holes and be done with it&nbsp;or&nbsp;Print out the “Center Stud Mount” of the version you are trying to mount. These pieces can be screwed directly to the wall, or if you have a pegboard or slatwall mount, this little piece just slides into the recessed area from the “back” side. You can glue this in place but you dont need to at all, once the mounting pegs are attached to the Battery Charger, that entire plate will stay securely attached to the pegboard or slatwall attachment.&nbsp;The Studs/pegs are printed 3mm longer than they need to be to accomodate the thickness of the adapter plates should you need to use one. But at least for me, the mount does not wiggle around

Dewalt Battery Charger Mounts

Dewalt/WallControl

colezajicek

Modular Small Parts Drawer System&nbsp;I was working on a project with a lot of hardware and ended up with bags and bags of spares. They were littering my desk and making it hard to work so I put together this small parts drawer system to handle the mess and keep the hardware easily accessible for my next project. The housings slide together with dovetail connectors, a dab of super glue will keep them together. There are two housing variations, a bottom version with spots for TPU feet, and a regular version with dovetails on the bottom. I've made them in 1x1 and 2x1 (wide) so far; planning to add a 1x2 (tall). The drawers have front and rear stops so you won't accidentally pull them out and spill all of your M3 screws on the carpet.&nbsp;Files:I uploaded STLs if you want them as is as well as 3MF, STEP, and F3D if you want to play around with them.&nbsp;Print Settings:I'm running some weird settings and a larger nozzle, so I don't have validated click and go print settings for you. I've printed them in PETG-CF and PLA without issue, just make sure your printer is calibrated.The housings print on their backs facing up really well, the connectors print flat. The drawers can print top down with no supports if you have good bridging settings, I print them bottom down with traditional supports and 3 interface layers.I print all parts with however many walls is needed to not have any infill, probably like 6, they're thin parts, no sense having 1mm of infill.All STL's should be in correct print orientation.&nbsp;Helpful:The drawers are a little tricky to slide in. Don't force them straight in, they'll break. Go in one corner first at an angle, make sure you're past the front stop, then slide the other side onto the rail.Here's a video:<figure class="media"><div data-oembed-url="https://youtube.com/shorts/2vLnTnYWMY8?feature=share"><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=2vLnTnYWMY8"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://www.youtube.com/embed/2vLnTnYWMY8" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>&nbsp;&nbsp;This Noctua color theme is Bambu PLA, Matte Latte Brown and Matte Dark Brown.&nbsp;&nbsp;&nbsp;Let me know what you think, if you have any requests, ideas, changes, whatever. Thanks for checking it out.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;

Modular Small Parts Drawer System

Storage options

FireDragon3D

<h2>Summary</h2>Purge lines be gone - with the Scrapo! The 3D printing scraper Meet the Scrapo - Scraper spatula&nbsp;Introducing the Scrapo - 3D Printing Bed Scraper, the ultimate solution for removing stubborn purge lines from your 3D printer bed. Our scraper is designed to make your life easier by providing a quick and easy way to clean your printer bed without leaving any residue or scratches behind.&nbsp;Our ergonomic handle ensures that you can use our scraper comfortably for extended periods without experiencing hand fatigue. The durable blades of the Scrapo - 3D printing scraper are built to last, and its unique design allows it to remove even the most stubborn purge lines with ease.&nbsp;As a 3D printing enthusiast, you know how frustrating it can be when your model is difficult to remove from the printer's print bed. That's why we created the Scrapo - 3D printing scraper, a tool that makes cleaning up after a print job quick and easy.The Scrapo - 3D printing scraper is unlike traditional scraping tools in that it has been designed with your comfort in mind. Its ergonomic handle ensures that you can work for extended periods without experiencing hand fatigue or discomfort.Our scraper's unique blade design removes even the most stubborn purge lines quickly and efficiently, so you can get back to creating new designs in no time. With our product, you'll never have to worry about leaving behind residue or scratches again.&nbsp;In conclusion, if you're looking for an efficient way to clean your 3D printer bed while also ensuring maximum comfort during use, look no further than the Scrapo - 3D Printing Scraper. Our product is sure to become an essential tool in your arsenal of 3D printing accessories. So why wait? Download yours today and start enjoying cleaner prints with less hassle!&nbsp;The one 3D printer tool that we all need. This bed scraper works really well.&nbsp;One fellow designer made a small hook to help hang your print bed scraper the Scrapo!  Check out their model:<a target="_blank" href="https://makerworld.com/en/models/162143" rel="nofollow noopener">https://makerworld.com/en/models/162143</a>&nbsp;NOTE: I have found that printing this in PLA works better than printing the bed scraper in PETG. I found that with PETG the scraper edges break off really easily.Another thing to consider, when making the printer scraper in PLA, do ensure that the bed is a little cool before using it. Glass transition for PLA is 55 to 60.&nbsp;

Scrapo - 3D printing scraper

Bambu Tools

Eleazar 3DinPlastic

A simple but effective shrinking tower, it is a little bit bigger than the normal ones so that the cooling of the filament is not a problem and does not give false results.&nbsp;<a target="_blank" href="https://makerworld.com/en/models/54325#profileId-56042" rel="nofollow noopener">If you can't adjust the filament retraction but you still haven't adjusted the temperature correctly, do this test and you will solve your yarn problems.</a><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/683918/2024-03-11_86e5d59a448fc.webp"></figure>

Retraction Test / Bambu Lab P1P P1S X1C

Calibrations

iLab 3D

The Portal&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm - 1 loop&nbsp;Filaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ Sunlu Grey Transmission Distance: 2 PLA+ Sunlu Silver Transmission Distance: 2 PLA+ Sunlu White Transmission Distance: 5&nbsp;Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Grey At layer #13 (1.12mm) swap to Silver At layer #18 (1.52mm) swap to White for the rest.

The Portal - HueForge

Cool But not going to print

giacomo.borghi02

Bill of Material (BOM)2pcs M2x5 mm Screws2pcs M2.5x12 mm Screws2pcs M2.5 Nuts<figure class="media"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/147529/2023-11-06_4zoueq470mik.png"></figure>

Bambu Lab P1P - P1S tilting display MOD

Printed

PiNK_3DP

New and improved! (small version) Get ready to stash your goodies in style with this 3D model of a stash jar! So, why settle for a boring old jar when you can have one that's hex-traordinary? Get your hands on this 3D model now and start printing your way to stash jar perfection! Since V1 of my popular hex stash jar I have improved the threads and they are now much smoother. Check out my profile for the small & divided version! The DIV version lid is shorter than the small lid, but will work for either.

Small Hex Stash Jar V2

Matt

shawn.mek

My son requested some wolverine claws, and since I had just printed a print in place spring box I was like ‘I bet we could make some claws spring loaded!’&nbsp;Famous last words…&nbsp;Fortunately (or unfortunately?) the spring idea proof of concept worked immediately:<img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-13_5780d7bc20069.gif">&nbsp;So we were off! And then a billion iterations later, we get to this first release version.&nbsp;It's a bit tricky to assemble, but I'll try to get some how to's in the future if needed. Please leave feedback on what I might do to enhance it - or let me know points of failure that I can strengthen.&nbsp;Thanks!&nbsp;For Assembly, you may want to watch this youtube where Uncle Jessy successfully assembles it (<a target="_blank" href="https://youtu.be/PM3DsiuDIDw?si=Ku4l55NfCI200hou" rel="nofollow noopener">https://youtu.be/PM3DsiuDIDw?si=Ku4l55NfCI200hou</a>). &nbsp;HAND STRAP - This was for my son, and I actually tried using the Polycam photogrammetry app on my phone to 3D scan his hand, and then made the strap using that :). It worked suprisingly well for HIS hand. I scaled up the strap for bigger hands, but you can also cut or delete a piece to make it bend and fit different sizes.&nbsp;&nbsp;ASSEMBLY&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_a7a31b9c9d4a4.jpg">&nbsp;The brake.&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_2e8e8b3f94888.jpg">Stick the ‘trigger’ down through the brake sideways and then turn it (somewhat gently, don't break :))<img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_034ac41c92e4e.jpg">&nbsp;Put the springs into the brake<img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_23fc35f069994.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_0a283aa1fd7bc.jpg">&nbsp;TRICKY PART -No to putting the brake on this way (it won't have enough space to release):<img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_ecf791bfd8bc5.jpg">Put it on the other side (I've never had to glue, but tolerances may necessitate that - the mechanism itself actually holds it together pretty well regardless), and then stretch/pull it over to the front (the springs will now have arm length and springiness for the brake mechanism):<img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_d14067333d86c.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_1106349f4ddcc.jpg">Now put the claws through while holding the brake out of the way. Depending on tolerances you may need to move the claws in and out of the guides to break it in:<img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_1479d7245892c.jpg">Snap the springs into claws and top plate, and then top plate into bottom plate:<img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_0c259e60d24bd.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_a30a3d439e271.jpg">Pull down brake and pull out claws, slip strap around extended claw spring and onto the assembly:<img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_d40f2a0eb72e9.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_0233270d2b7b3.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/598278/2024-02-14_aebe1855448f5.jpg">&nbsp;&nbsp;

Wolverine Claws - Retractable, Spring-loaded, Trigger (No extra non printed parts needed)

Kids

Clucky

This is a DNA shaped pen Holder I designed in Fusion 360. This design prints best on core x-y printers and if you are using a bedslinger, you should slow down print speeds. There are two designs, one that holds 10 pens and one that holds 6. Neither need supports to print.