These are turning out fantastic. I am in the process of printing hundreds of these to give away at the annual blessing of the bikes this spring. update: over 800 bikes showed up for the event and over 400 prints were given away. everyone loved them. thank you for sharing this model

The black bleeds thru on a lot of these pumpkins, i would recommend adding an extra wall or two to minimize this, otherwise fantastic

Good print profile, very clean(still not sure why 'Blue Version' wouldn't print without supports turned on). My biggest issue (which is really minor) I would like to see an additional white layer at the end, the base color bleeds thru the 'gameboy' banner a lot. I see it in other pics being posted also. still a solid print profile, kudos 🤘

I turned it into a piggy bank

I would recommend applying some anti slip pads for the underside, others great print

excellent print, do make sure your Z height is calibrated properly beforehand, I had some bed adhesion issues with the container. Update: it turned out that this was not quite big enough for the amount of samples that I wanted to have on hand however this is still my favorite way to store my filament samples so I made it a 3-tier container instead of only 2 🤘

some resizing may be required. made this for a coworker who drinks a lot of bubbl'rs, after 5 reprints, some cans would fit and some don't leading my to believe they source their cans from multiple manufacturers. pusse the print at about 25% to test fit your can

I wish I would have used a slightly darker gray for a better contrast and I'm not a fan of bambu's pink. however aside from some minor bed adhesion issues these Prince turned out very good. I would almost consider skipping the very last two layers of white because, I think at least, takes away from the sharp contrast of the green and the pink colors.

I ran into very few issues. I had to dremmel the PSU bracket a little bit since my 90* power cable pointed in the wrong direction. Even with an SFX PSU a 3070Ti was a snug fit around the PSU cables preventing a front mounted fan. I would not have minded having the option for a traditional bottom mounted PSU. Overall, very happy, I love small builds and i was struggling to find a small case that would still fit my 3070Ti.

In the main print profile, the cup is floating over the print bed. Easily fixed but the stripes on the spacer will not line up with the cup once it adjusted, causing an unnecessary amount of filament changes. Best remedy for this is to just print it separately. Otherwise amazing! I made a half dozen of these as Christmas gifts for my D&D group.

feels great but does not fit in oem travel case

recommend increasing size by 0.1% for more universal fit

for some reason they refused to stick to the build plate but after 40 failed, I finally got a good batch and they turned out super cute. if you are one who is very conscious of the amount of filament wasted during a multicolor print, I would recommend painting the ears to match the body color instead of using pink. the amount of pink that was purged was five times more than the amount of filament used on the model. still a very cute model, looks smooth and has enough articulation to be a fun little trinket

so the trending comment for this model is that it is too small for the handle and ends up stretching. and for some people breaking, I had to modify mine in the slicer regardless because I have a different 3D printed door handle, however scaling the model up by about 2%-3% should take care of the fitment issue for the factory door handle