Solid hold on the dock and an easy print. With some AI advice I used a TP-Link USB ethernet adapter (UE306; https://a.co/d/0dZS9M0c) to ensure its cord was long enough so as not to interfere with the dock.

Easy print and a high-quality outcome. Definitely more comfortable to use this controller as compared to the stock one. I went with translucent PETG on the flip-up cover so I could easily see the status light on the transmitter board. Otherwise I used Bambu matte PLA for the rest.

Excellent profile, yielded an immediate improvement in print quality with Bambu 95A HF on my A1. I was starting to avoid using TPU entirely from the horrible stringing and mangled seams. I still have a bit of surface imperfections to deal with but the overall quality is a huge improvement. Thank you!

These cars are a blast! Just zippy enough to play with indoors, and easy to print. Steering feels pleasantly tight. I'm excited to let my daughters drive them around. The alternate gears were definitely needed. I kind of want to try printing the tires in PLA to see if I can drift a bit. Might be worth seeing if I can limit the current throttle to, say, 75% and program a shoulder button to boost up to 100%. Anyway, thank you for this fantastic contribution to the community! I printed all the non-body components in Elegoo Rapid PETG with the gears in PETG HF. Bodies, other colored components, and the wheels were done in Bambu matte PLA.

Worked great for a recent trip. Fit both my kids' little toothbrushes as well as my own adult-sized one. Thanks!

Very impressive design and a fairly easy print. I did it entirely in PETG (sure wish I had some matte black PETG!) with the exception of the green portion, which is matte PLA. I haven't been able to find a small enough rubber band so I'm using one of my girls' hair bands which is looped a couple times around and is too strong to see the recoil action. Finding a spring was difficult as the one in the description (7.4 OD x 20mm) can't be found outside of India. I ended up buying this assortment: https://a.co/d/1nBuvW3. After some testing I settled on the .7mm x 8mm x 25mm spring. Note that the .8mm x 8mm x 25mm spring will break parts! All in all an exceptionally cool model and a fun print. Thanks for posting it!

This mount does what's advertised and does it well. The one comment I have for improvement is that the Skadis hooks on the rear are very loose, to the point where tension from the USB cable moves the whole holder around on the pegboard. I'd prefer a mounting solution that's more stable and isn't perpetually off-level.

Excellent. Take care in removing it from the build plate otherwise the helix area - above the threaded part where the cap screws on - will break off. I learned that the hard way. The whole print feels quite solid, that seems to just be a natural weak point. If anything my intelligence was defective, not the design.

Printed two that came out just great. They work well. Unfortunately my three-year-old found that pulling the trigger by its lowest points puts too much stress on the housing around the trigger, which broke. Having the trigger out of alignment caused it not to slide properly and thus the gun stopped working. I'll re-print the body of the gun and hopefully my daughter will be a bit kinder to it next time.

So glad this model was posted. My AMS Lite is wall-mounted and I printed the smaller desiccant holders; there was no chance the desiccant pouches were going to stay in there without a lid. These fit perfectly and printed quickly and accurately.

Excellent. Printed without any issue. I used clear caulk to seal the plexiglass to the buckets. Here's the plexiglass I used: https://a.co/d/2vpEcJ2.

Excellent. Printed and came together easily. I went ahead and applied caulk to seal the seams between the two buckets - as well as their lids - and the action panels. I used the small desiccants holders but I found they wouldn't stay put at all. I took care of that by adding magnets to the holders and the clips meant to hold the buckets together. I also had to add lids to them to keep the desiccant inside.

Sturdier than I'd at first thought. I appreciate the density of paints, I wanted to make efficient use of the space without the paints being horizontal. Thanks!

Fantastic, I printed a ton. Thank you!

Holds securely, works great, thanks!

Strong enough and fits great. Thanks!

Works great for my Badger Patriot 105.

Perfect, just what I needed. A perfect fit for Citadel's water pot.

My daughter loves it. Thank you!