JappyJan

Stranula

I wanted a way to mount my puck charger to the multiboard.This also uses my new <a href="https://www.printables.com/model/794868-multiboard-snap-anywhere-connector" rel="nofollow">Snap Anywhere Connector</a> so that the puck can be mounted directly from it's center point instead of an edge. This connector fits very tightly to ensure your phone is well secured.Hot glue was used to secure the puck to the mount.

Multiboard Magsafe Puck Charger Holder

multiboard 

PecaJosef

3D Printable frame for 3inch FPV drones. Designed for SLS technology with the possibility to print with standard FDM printers.

3D Printable 3-inch Drone Frame

drones

David Krammer

You can print it with AMS like I did for convenience, but you could also just make the printer stop at the middle height and switch colors yourself.This model makes about 27g of filament.

DIY Dual Color Filament 27g [NO AMS needed!]

stuff for 3D printing

Sakul

Introducing the &#34;Spaghetti Mate&#34; – your kitchen companion for precision pasta perfection! 🍝✨  Say goodbye to guesswork and hello to perfectly portioned spaghetti every time. This innovative doser allows you to effortlessly measure out the ideal amount of pasta, tailored to your serving needs. Whether you&#39;re cooking for one or a crowd, the Spaghetti Mate lets you customize your spaghetti servings with ease. Metric ans imperial versions available. &nbsp;  You may also like:&nbsp;<figure class="table" style="width: 98.39%"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td><figure class="image"><a href="https://makerworld.com/en/models/484385#profileId-396742" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000117711/design/2024-06-04_b9c40f7954426.jpg"></a><figcaption>🍦Pop &amp; Catch Toys Ice Cream Cone🍦</figcaption></figure></td><td><figure class="image"><a href="https://makerworld.com/en/models/447981#profileId-354736" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000117711/design/2024-05-01_85f01efc3a63d.jpg"></a><figcaption>🐷Minecraft Animal Farm Pack🐮</figcaption></figure></td></tr></tbody></table></figure>Bon appétit!🍝

"Spaghetti Mate" Pasta Portioner

kitchen

CPDesign

I designed this organiser for my girlfriend&#39;s Skadis board for pencils, brushes, scissors, etc. It has two “pockets” with dividers.&nbsp;printing preferences on BBL P1P:<ul><li>printed in Redline PLA</li><li>0,2 mm standard quality</li><li>20% infill</li><li>brim auto</li><li>tree support </li></ul>printing time was ca. 4 hours.

Organiser for Ikea Skadis

Skadis

deejay

Schubladen für den beliebten Ikea Lack Tisch.Bei mir habe ich1x große Schublade2x mittlere Schublade1x kleine Schubladeverbaut.&nbsp;Kann man natürlich auch an anderen Tische, Regale, oder Komoden schrauben. siehe Bild mit den weißen Schubladen.&nbsp;&nbsp;&nbsp;Drawers for the popular Ikea Lack table.With me I have1x large drawer2x middle drawer1x small drawerinstalled.&nbsp;Of course you can also screw it to other tables, shelves or chests of drawers. see picture with the white drawers.

Ikea Lack Schubladen / Ikea Lack drawers 

IKEA Lack

3DPrintable.art

<figure class="table"><table style="border-style:solid;border-width:0px;"><tbody><tr><td style="border:0px solid hsl(0, 0%, 100%);"><h2>Please read these instructions before printing!</h2></td></tr></tbody></table></figure>Adorable articulated teddy bear, perfect for a toy, a gift or a decorative item. This bear can stand up and sit down, and its arms and head can move. &nbsp;Works well in single or multi-color prints. Be creative and share your results!&nbsp;Don't be scared but printing this model will require supports:<figure class="table" style="width:95.8%;"><table class="ck-table-resized" style="border:0px solid hsl(0, 0%, 100%);"><colgroup><col><col></colgroup><tbody><tr><td style="border:0px solid hsl(0, 0%, 100%);"><figure class="image image_resized" style="width:100%;"><img src="https://makerworld.bblmw.com/makerworld/draft/371694/2023-12-30_3820f9457a368.jpg"></figure></td><td style="border:0px solid hsl(0, 0%, 100%);">An example of a finished print with supports. As you can see, the model is surrounded by these weird structures, which are called supports.&nbsp;Support structures are used to support overhanging geometries and need to be removed once printing is over.&nbsp;There are <a target="_blank" href="https://www.google.com/search?q=How+to+remove+support+structure+from+3D+prints" rel="nofollow noopener">multiple guides online</a> that will teach you how to use and remove supports, but it might be helpful to use some of these tools:<figure class="image image_resized" style="width:70.84%;"><img src="https://makerworld.bblmw.com/makerworld/draft/371694/2024-01-06_3aba5e239a66c.png"></figure>&nbsp;Please avoid applying excessive force by hand, as it might break the printed object.&nbsp;Bambu Lab also has a great <a target="_blank" href="https://wiki.bambulab.com/en/software/bambu-studio/support" rel="nofollow noopener">wiki article</a> that explains how you can use different support settings. If you find a better support configuration, please share your print profile.</td></tr></tbody></table></figure>For a perfectly smooth surface, you can use a different <a target="_blank" href="https://wiki.bambulab.com/en/software/bambu-studio/layer-height#effect-of-layer-height" rel="nofollow noopener">layer height</a> or experiment with<a target="_blank" href="https://wiki.bambulab.com/en/software/bambu-studio/adaptive-layer-height" rel="nofollow noopener"> variable layer heights</a>. In any case, expect the printing time to increase significantly, especially for multi-color prints.<figure class="table"><table style="border-style:solid;border-width:0px;"><tbody><tr><td style="border-style:solid;border-width:0px;">To <a target="_blank" href="https://wiki.bambulab.com/en/software/bambu-studio/reduce-wasting-during-filament-change" rel="nofollow noopener">minimize filament waste</a>, we strongly recommend printing multiple objects simultaneously. &nbsp;The provided print profiles are merely suggestions, and when selecting different colors, please ensure that you update the <a target="_blank" href="https://wiki.bambulab.com/en/software/bambu-studio/reduce-wasting-during-filament-change#auto-calc-flushing-volumes" rel="nofollow noopener">flushing volumes</a> to prevent any unexpected color mixing.</td><td style="border-style:solid;border-width:0px;"><figure class="image image_resized" style="width:80.65%;"><img src="https://makerworld.bblmw.com/makerworld/draft/371694/2024-01-02_0dbb0bcdbe4e8.png"></figure></td></tr></tbody></table></figure><figure class="table"><table style="border:0px solid hsl(0, 0%, 100%);"><tbody><tr><td style="border:0px solid hsl(0, 0%, 100%);"><figure class="image image_resized" style="width:80.25%;"><img src="https://makerworld.bblmw.com/makerworld/draft/371694/2024-01-06_1ecd40b55155e.png"></figure></td><td style="border:0px solid hsl(0, 0%, 100%);">If you want to create your own print profile, please note that the neck is typically the weakest spot. It is recommended to reinforce it with a higher infill or additional wall loops.&nbsp;This should prevent it from breaking easily when removing supports or playing with the toy.</td></tr></tbody></table></figure>COMMERCIAL LICENSE AVAILABLE: <a target="_blank" href="https://patreon.com/3DPA" rel="nofollow noopener">https://patreon.com/3DPA</a>&nbsp;Check out <a target="_blank" href="https://makerworld.com/en/u/943536974" rel="nofollow noopener">our other models</a>. Your likes and downloads support more content.&nbsp;Happy printing!&nbsp;

Articulated Teddy Bear (print-in-place)

decorations 

dfreshkremer

Check out my profile and print VERSION 3 of these mini-screw drivers.  It is a much better model with better tolerances! &nbsp;These are mini screw drivers that are perfect for stocking stuffers! Would be good to keep in a car or kitchen junk drawer when in a pinch.I printed these in PLA.&nbsp;My machine (Bambu P1P) is really dialed in, and I have the perfect snug fit for the bits. However, if yours is too tight, you can scale it up by 1-2%. If you print these in PETG, you may also need to scale it by 1-2%, because PETG shrinks more than PLA.&nbsp;I printed these at either layer height of 0.1 or 0.15. I have not tested 0.2. With the small threads, the smaller layer height is better!&nbsp;The threads are tight at first but will loosen up and work perfectly after you use them a dozen times. I usually just open and close the cap 20x right after printing and then they work well.

Mini Screwdrivers

Tools

altair3d

I have been using 3 Ikea Lack side tables for my Prusa Minis and have enjoyed the size. When I got the A1 Mini, I was barely able to fit everything on the Lack side table, but not very well. This stand aimed to fix that, and hopefully other difficult spaces. It allows you to mount it to the side of the table, pushing it to the right as far as possible while still being stable. You will need to 2-4 screws depending on the mount you choose. The AMS mount is dovetailed to allow you to remove it with out needing to unscrew the stand from the table or wall.&nbsp;I've also included three mounts. One for any standard desktop that bolts with two screws from the side and a single screw on top. Another one That will allow you to bold it to the wall. And one for the Ikea Lack Side Table.&nbsp;If you have any suggestions, or would like any modifications made, please let me know. I'd love any feedback you can give.

AMS Lite Versatile Mounting System w/Ikea Lack Stand option

AMS Lite accessories

OlleMark

Updates:2023-12-19 - Made the allen keys easier to remove2023-12-22 - Added space for the PTFE comb and added space for the A1 standard nozzle wiper.2023-12-25 - Added more labelbodys for the a1 standard.2023-12-28 - Added slightly more space for the A1 standard nozzle wiper..Introducing my small accessory box for the a1 series that fits all of the a1 accessories with a lid that locks in place. A bunch of different labels have been provided to fit your needs. :).Designed to be as compact as possible and with a similar lid deisgn as my other accessory boxes you can just slide the lid on the underside when the box is in use and then put it back when the box is being stowed away. The lid has a new locking mechanism i have been working on and can easely be released by pressing both of the release “buttons” on each side..I have provided a blank lid and label if that is your preference :).I printed the lid and label with 1mm top and bottom thickness to avoid any infill and the bottom of the box is printed with 0.6mm bottom thickness and 1mm top thickness with 15% gyroid infill. Everything else is stock bambulabs settings.