Epic design and artwork! Thanks! The print profile was perfect.

These are great! Thanks. The print profile is spot on.

I too did it in glow in the dark filament! Print profile is great. Turn the supports to normal(auto).

I turned off the brims for printing with a Bambu Cool Supertack plate. It’s a great model! Well designed and the print profile is pretty good. The 8x2mm magnets worked well with a drop of super glue.

The diffusers are about .1mm or .05mm too long but they work well enough. Great model! Great print profile.

Execellent print profile. The 4 parts on a single plate were very convenient.

Great print profile except for the grid infil. I changed it to gyroid.

Excellent model and print profile! I recommend setting the filament that you use for text as the first filament printed. These may need a little “breaking in” spin.

Perfect! They work well and look great.

It came out pretty great!! The gap for the wires to travel through when storing the complete hot ends is just a little too tight in my opinion. if they were just a little bit wider it would be perfect. Great model all the same! Thanks!