JackalStudio

Big Simi

Hello everyone! ✨✨&nbsp;Today I bring you a new type of model never seen before on my page! &nbsp;I made a flexible Rayquaza! 🐉🐉🐉&nbsp;Let me know what you think and if you want me to make other types of legendary pokemon too 😉&nbsp;&nbsp;I hope everyone enjoys this and gives it ⭐⭐⭐⭐⭐&nbsp;&nbsp;&nbsp;🚀 If you like my work, consider giving a boost to this model 🚀&nbsp;&nbsp;My other design:&nbsp;<ul><li><a target="_blank" href="https://makerworld.com/en/u/2583221243/collections/519798" rel="nofollow noopener">Hueforge Pokemon</a></li><li><a target="_blank" href="https://makerworld.com/en/u/2583221243/collections/340368" rel="nofollow noopener">Pokemon Model</a></li><li><a target="_blank" href="https://makerworld.com/en/u/2583221243/collections/607365" rel="nofollow noopener">Design Model</a></li><li><a target="_blank" href="https://makerworld.com/en/u/2583221243/collections/340360" rel="nofollow noopener">Hueforge</a></li><li><a target="_blank" href="https://makerworld.com/@BigSimi/collections/1301776" rel="nofollow noopener">One Piece</a></li></ul>

Flexi Rayquaza

Pokémon

Neebick

Master Sword pen that is designed to use Pilot G2 ink refills (Gold and silver inks are available for extra fun). I designed the hilt for multiple color printing but looks very nice in all silver as well.<h3>Printing</h3>The model prints great with a 0.4mm nozzle. All pictures are printed with it at 0.08mm layer height. A 0.2mm nozzle will look better with finer details like the Triforce on the blade but is optional.&nbsp;Print at lower layer heights for better detail and smoother feel while handling.&nbsp;Supports are necessary for the hilt at the section that the blade inserts into. Supports also helps with the blade top since it is very narrow on the plate and could jostle loose. The screw must be printed vertically for best detail and function.&nbsp;I printed the blade in Bambu Labs Basic PLA Silver. This filament gave a very smooth and satisfying to touch finish without paint. I had to print on separate plates to achieve it since unsightly bulges appeared when the nozzle moved between parts to often. This is most likely due to the tall and skinny profile of the parts.<h3>Assembly</h3>The hilt prints in two halves for better detail and less filament waste on purges. Remove supports and glue halves together. Alignment is important for appearance and part fitment.<figure class="image image_resized" style="width:32.89%;"><img src="https://makerworld.bblmw.com/makerworld/draft/549416/2024-02-01_8fcaf10bf4d81.png"></figure>&nbsp;The blade top inserts into the hilt. Friction fitting will hold but glue can be used for a more permanent assembly.<figure class="image image_resized" style="width:30%;"><img src="https://makerworld.bblmw.com/makerworld/draft/549416/2024-02-01_43c74889e437e8.png"></figure>&nbsp;Slide Pilot G2 refill cartridge into blade body. It will not go all the way in. The fitment is purposely tight for better feel while using as a pen.<figure class="image image_resized" style="width:30%;"><img src="https://makerworld.bblmw.com/makerworld/draft/549416/2024-02-01_944e3f5ee510a8.png"></figure>&nbsp;Slowly screw in the blade top into the blade body. You will feel a slight resistance as the screw pushing against the ink cartridge. Continue till the parts align flush. DO NOT over tighten to avoid damage to the threads. There is a slight over tightening allowance but you will not be able to get an additional turn without damaging the parts.<figure class="image image_resized" style="width:31.67%;"><img src="https://makerworld.bblmw.com/makerworld/draft/549416/2024-02-01_80381d0adb3148.png"></figure>&nbsp;To remove the ink cartridge, unscrew the top and press the tip against a piece paper. There should be a slight pop as the the pen tip aligns with the blade tip. The cartridge should just shake out now.

Pokémon

Stuff