Jaceq

Lisa Lisa Made

Organize your morning and evening pills in this aptly pill shaped organizer. There are two compartments per “pill” for each day of the week. The lids have a sun and a moon in addition to the day of the week to assist in organization. The main body is printed all as one piece, and then there are seven individual lids that snap into place and can be slid to reveal either the morning or evening compartment.&nbsp;*Bonus* Single unit has been added with two lid options - blank or sun & moon (no day of the week text) !&nbsp;Design Features:<ul><li>Easily customizable - because the lids are loose, you can choose which day to start your week with (the 3DM model has the lids grouped into their own assembly separate from the main body for easily making the lids a different color from the main body)</li><li>No additional parts needed - the lids are designed with a friction fit to snap into place and do not require any magnets to stay closed</li><li>Single plate print - all lids and the main body fit onto one plate, even when printing in two colors by object (~4 hour print in PLA)</li><li>No printing support required - all parts were optimized to not require any support while printing on the X1 Carbon (134g total)</li></ul>Size & Capacity:<ul><li>243.5mm long x 70mm wide x 23mm tall (~9.58" x 2.75" x 0.9")</li><li>I can easily fit 7 pills of varying sizes in one half compartment, or 4-6 if just filling it with medium/larger pills (if folks are interested I can easily maker a taller version that could hold more pills)</li></ul>Print Setting Variations (for PLA on an X1 Carbon):<ul><li>Standard 0.2mm layer height with the 0.4mm nozzle on PEI textured plate</li><li>Switched to “adaptive cubic” infill while in “global” settings</li><li>Selected “print by object” while in “global” settings</li><li>Customized variable layer height settings separately for body and lids to get enough detail in chamfered mechanical areas without increasing entire print time significantly by using a fine layer height for entire print</li></ul>Assembly & Use:<ul><li>Sliding dovetailed lids will require a little force to “snap” into place the first time (lids should slide smoother after a few rounds of opening and closing to break the mechanism in)</li><li>There are protruding chamfered areas on the underside of the lid that keep it from just sliding open whenever - this means there is some small resistance to slide the lid into the “open” position</li><li>A stopper is located on the center bottom of the lid to keep the lid from sliding too far open - thus, only one side of each day is open at any given time</li><li>Please keep in mind that there is no “child lock” on this design and it is not meant to keep medications secure - for personal use at your own discretion!</li></ul>

Pill Pill Organizer - 7 Days - Morning & Night Compartments

Jacek

FilliFuu

Bitbox stackable folding storage boxes&nbsp;Easy assembly, requires no glue or screws, 100% 3d printed. When stacked they click on top of one another, has an extendable handle and customizable storage slots.&nbsp;Perfect for jewelry and small parts of any sort.&nbsp;The print profile provided has been slowed down wall to fix the known benchy hull line problem, feel free to increase speed and change supports / colour profiles if you want a faster print with a minor drop in quality&nbsp;*Advised to avoid silk and weaker filaments*I have tested many times, great filaments include sunlu pla, cc3d, ziro, elegoo, eryone, flashforge - all working except ziro carbon fibre and silks. cc3d silk (blue metallic photo) is the only silk that works great for a metallic look, just print slow.&nbsp;&nbsp;Colours used in the pictures -Flashforge burnt titaniumVarious generic sunluZiro GID & glittercc3d silk blueAnd several other&nbsp;Printed at 80 percent - easily scalable, 100 percent works if you want to scale up, just fits on the print bed (250mm)and also 60 percent is also tested and works perfectly. Simply scale and orientate on the beds.Stl files provided are all 100 percent scale.&nbsp;Assembly&nbsp;Very simple and should be straight forward.&nbsp;Step one after all parts are printed is to attach the lid to the top trays, using slight pressure push together and click in place, it will be easiest to hook one hinge in at a time. &nbsp;<figure class="image image_resized" style="width:19.14%;"><img src="https://makerworld.bblmw.com/makerworld/draft/254494/2023-12-10_48d249f7055d5.jpg"></figure>Step 2 is to insert the carry handle into the slots on the bottom tray. Simply hook one side in and then the other, gently squeeze the bottom clips into the slot, be careful not to flex and break the bottom tray. then add the washer and nuts to the screws to secure the handle.<figure class="image image_resized" style="width:19.44%;"><img src="https://makerworld.bblmw.com/makerworld/draft/254494/2023-12-10_f86c817b2a5b3.jpg"></figure>Step 3, the final step is to assemble the arms and handles for the lids. Note the orientation of the middle trays, the thicker edge facing outwards.Assemble the arms one side at at time, see photos to see the order needed for the cantilever action, once you insert the arms into their holes, fasten with the printed c-clips. Also take note that there are a few extra printed clips incase you accidently break some, I've tested many filaments and the only I have trouble with so far have been silk filaments and filaments with additives, glow in the dark works great strangely however. <figure class="image image_resized" style="width:32.95%;"><img src="https://makerworld.bblmw.com/makerworld/draft/254494/2023-12-10_eaab8cc8cce6b.jpg"></figure>See photos if any more help is required or just ask. &nbsp;Enjoy.&nbsp;&nbsp;

Cantilever Stackable Folding Bitbox

Ania

Ambro Art

Benchy to test print quality and ams quality. There are 4 profiles set to: 4 colors, 3 colors and 2 colors and one color.&nbsp;Print the model and then you can see if there are problems in the exchange of the AMS filament or adhesion problems between the various colors.

Benchy test (ams)

Printer Tests

MakerVerse Designs

<h3>Fully 3d printed slide shoes, inspired by adilettes</h3><ul><li>printed with TPU (I used Bambu Labs TPU 95A HF, but I suggest using a softer filament)</li></ul>Important notes:<ul><li>It is for EU shoe size number 43 (male), but you can scale them to your size (use uniform scaling)</li></ul><img class="image_resized" style="width: 59.62%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000488792/design/2024-06-08_c42631354d275.png"><ul><li>If the shoe is too big to fit to the printers height, use the “WithSupport”-Version, rotate in Y-Axis (green) and use the cut tool in Bambu Studio to create a new flat surface parallel to the print bed<ul><li>I uploaded an .stl file without cut on the bottom for better scaling</li></ul></li></ul>&nbsp;<ul><li>There are two ways to print this:</li></ul><ol><li>Use a textured PEI bed and print it standing up without support (It works very well, especially with printers where the bed is not moved so much, such as P1S, P1P X1,…)</li><li>Or use another not so sticky bed and print it standing up with support (recommended for A1 or similar printers)</li></ol><img class="image_resized" style="width: 58.39%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000488792/design/2024-06-08_76346ecb50f49.png">&nbsp;Check out my other models, for example the fully printed crocs shoes: <a target="_blank" href="https://makerworld.com/en/models/425034#profileId-328514" rel="nofollow noopener">https://makerworld.com/en/models/425034#profileId-328514</a>&nbsp;Have fun with it and leave a like or subscribe if you like it!If there are any suggestions for improvement, feel free to write a comment.

Slide Shoes (Adilette) - Fully 3d-printed

Home

ruimach

<h2>Summary</h2>One more request from my kid, a smaller butterfly in the shape of a katana.&nbsp;<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=usRYMiP3Adw"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/usRYMiP3Adw" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;You will need:4x Screws: 3mm in diameter and 10mm long 4 nuts: 3mm Video with a small demonstration of the katana in action: <a target="_blank" href="https://youtu.be/usRYMiP3Adw" rel="nofollow noopener">https://youtu.be/usRYMiP3Adw</a>The initial layer may be challenging, so if needed, decrease the speed of the first layer.&nbsp;Assembly:The handles are different from each other. Both handle 1 A and B should be assembled together, and the same applies to handle 2 A and B. Handle 1, with the blade open, should be placed underneath, and handle 2 on top. Please refer to the image for orientation.&nbsp;Print Settings: Material: PLA Layer Height: 0.2 Infill: 15% Walls: 3 Supports: No Brim: No Raft: No Supports: No Change filament during print: Yes, make your own color schemes :)Enjoy. If you have any questions or suggestions, hit me up in the comments. And if you wanna support me, give it a like, download it, and share it with your friends. Happy printing!

Katana Butterfly

Franek

Alex

Very strong bicycle bottle cage.Easy print with no support.Hole distance is the standard 2.5 inch / 64 mm.It is also possible to glue the flat back against another flat surface if needed. I will use it this way to glue the bottle cage on one side of my cargo bike box.

Strong bike bottle cage

Bike

3DPF

If you have boxes for drying in AMS and only need a humidity sensor, this is exactly for you.&nbsp;Simple holder for a rectangular humidity / temperature sensor with the color BambuLab logo. You can place it between the two center slots.&nbsp;This type of sensor fits into the holder:<a target="_blank" href="https://www.aliexpress.com/item/1005004573585834.html?spm=a2g0o.order_list.order_list_main.59.65cd1802Pbk23f" rel="nofollow noopener">Mini Digital LCD Humidity / Temperature Sensor</a>&nbsp;&nbsp;Thank You! NOTE: this was designed for the original AMS, I have not tested with Hydra Mods…

AMS Humidity Sensor Holder

Bambu

Yopurinta

A drawer for the center console of a Tesla. Definitely, it fits in a Model Y of the year 2022. ;-)&nbsp;In the middle walls, I added slots for shopping cart chips. A normal one and one of me that can be pulled out if something went wrong. You can find the models that you see on the photos in my profile, too.&nbsp;I printed it with PETG and modeled the upper part with a thick rounding so that the guidance parts of the drawer are more stable. Additionally, the top layers have 70% infill in the print file (see screenshots).I used PLA Support filament under the guidance parts what worked fine for me. You could even use normal PLA as a support material for PETG instead. That can be removed easily from PETG, too.&nbsp;The print uses 165 grams of filament and my configured print file runs 7h, because I included an ironing of the top surfaces. You can unmask this to speed things up.&nbsp;The Tesla logo is inserted as a part. So it can be deleted or changed easily in color. I took the logo from this Printables make: <a target="_blank" href="https://www.printables.com/de/model/138781-tesla-logo/files" rel="nofollow noopener">https://www.printables.com/de/model/138781-tesla-logo/files</a>&nbsp;