JYMANA

AU3D

This decorative replacement offers an aesthetic upgrade to the standard AMS handle. To install, simply use a 1.5mm Allen key to remove the two screws securing the original handle.<h3>Printing Instructions &amp; Post Processing</h3>While Silk-PLA may seem like an attractive choice for its aesthetic appeal, its weaker layer adhesion can become problematic due to the repetitive pulling action on this part. Therefore, it is advisable to opt for more durable materials such as PLA, PETG, or ASA. I have obtained excellent results with Sunlu PLA Meta black, which boasts a glossy, silk-like finish.For optimal print quality, I recommend using a layer height of 0.12mm or smaller, along with 2-3 perimeters.Supports are necessary for the handle but can be removed with relative ease, except around the top teeth where extra caution is advised and you still might lose some teeth.&nbsp;If removing supports results in white marks, a quick fix involves lightly touching the affected area with a jet flame lighter. This method effectively blends in most imperfections.&nbsp;The screw holes require careful post-processing, as this area of the model is too intricate for supports. To facilitate smoother installation, I suggest pre-threading the holes by inserting the screws once before attaching the handle. This pre-threading ensures a more effortless final assembly.<h3>More Impressions</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000131404/design/2024-06-25_d9752a7317c1b.jpg"><figcaption><a target="_blank" href="https://amzn.to/3V7whbd" rel="nofollow noopener">Conjure Tricolor red yellow blue</a> (this has been printed with a free sample spool provided by Chitu Systems)</figcaption></figure>

AMS Handle - Dragon Head

Amélioration Bambulab

Chester3D

&nbsp;IntroductionThe original model is designed for printers with a 250x250mm bed.&nbsp;If for any reason it doesn't fit on your bed, you can resize the model to the size you want from your slicer.&nbsp;It consists of two parts, the lamp body (body.3mf) and the rear cover (lid.3mf).Sometimes I include two lids, with and without a hole (choose the one you want, I recommend printing the Lid with hole whenever possible, to be able to remove the LED cable).&nbsp;If the back cover does not have a hole, you can easily make it from Bambu Studio, or from any other slicer you use.&nbsp;----&nbsp;You will need&nbsp;<ul><li>LED Strip: <a target="_blank" href="https://s.click.aliexpress.com/e/_DekFgj1" rel="nofollow noopener">https://s.click.aliexpress.com/e/_DekFgj1</a></li><li>- Glue gun or Tape</li></ul>Optional, but recommended:&nbsp;<ul><li>Aluminum tape: <a target="_blank" href="https://s.click.aliexpress.com/e/_DEPgqHd" rel="nofollow noopener">https://s.click.aliexpress.com/e/_DEPgqHd</a></li><li>- Textured PEI Sheet</li></ul>----&nbsp;Assembly instructions&nbsp;&nbsp;You can follow either of these two videos to assemble the lamp. It's very simple, you stick the LED strip inside and that's it. If you want, you can use aluminum tape to improve the lighting, although it is not necessary: &nbsp;<ul><li>Assembly instructions by braga3dprint: <a target="_blank" href="https://www.youtube.com/watch?v=QNsShLmXYh0" rel="nofollow noopener">https://www.youtube.com/watch?v=QNsShLmXYh0</a> (He makes very beautiful designs, you can leave him a follow and help him grow his channel!)</li><li>- Another assembly instructions: <a target="_blank" href="https://www.youtube.com/watch?v=nDUlBp7Mm1c----" rel="nofollow noopener">https://www.youtube.com/watch?v=nDUlBp7Mm1c----</a></li></ul>----&nbsp;Printing settings&nbsp;Following braga3dprint recommendations, you can start with these settings in Bambu Studio:<ul><li>Preferences (CTRL + P) → Activate developer settings → Quality → Advanced → First Layer Flow Ratio: 1.04</li><li>- Quality → Wall generator → Arachne</li><li>- Quality → Wall transitioning threshold angle → 50 degrees</li><li>- Strength → Advanced → Infill/wall overlap → 20%</li><li>- Quality → Advanced → Avoid crossing walls</li><li>- Increasing retraction / reducing temperature can help reducing wisps</li><li>- Order color printing from lightest to darkest color</li></ul>Important! Additional tips Remember to remove the purge line at the start printing, otherwhise it will ruin the print.Adjust the sequence of colors from Light colors to Dark colors, to prevent stringing. &nbsp;

SEGA LED Lamp

Sega

m.cody.sims

Just a good Mando helmet!&nbsp;My profile doesn&#39;t have support on the inside of the helmet because I have found it didn&#39;t really help that much with the quality and it used a lot of filament. the very center of the inside will be rough because of this but it hasn&#39;t been an issue for me.&nbsp;For those wondering what I use for a face sheild I use a Hobart 770580 Face Shield Replacement Lens, Shaded from Amazon. I cut it to shape and use a little bit of hot glue along the front and near the temples. That seems to be enough. I would recommend getting air soft helmet padding for a custom fit and comfort.&nbsp;If you like my work, please consider supporting me by boosting my model or <a target="_blank" href="https://www.buymeacoffee.com/m.cody.sims" rel="nofollow noopener">buying me a coffee</a>!

Mandalorian Helmet One Piece

Casque

Havoc_Eins

Some light sanding on the trigger is required. Use super glue to adhere the parts. There are no moving parts in this model (Non-removable magazine). Print with tree support (slim), especially for the picatinny rails and overhang on the ejection port.&nbsp;Printed with PLA but other materials should work fine based on their respective calibrated profiles.&nbsp;Introduction The Five-seven is a modern pistol of Belgian origin. It was developed by FN of Belgium in the late 1990s as a companion to the P90 sub-machine gun. The name was derived from the 5.7x28mm round it fires. As such, it is the first successful pistol in a high-velocity small diameter caliber.&nbsp;Design The Five-seven is a delayed blowback pistol. The exterior consists of polymer, while the internal mechanism is made out of metal. The hammer is encased by the polymer-covered steel slide. A distinctive feature is that the Five-seven is thinner near the muzzle. An accessory rail is mounted under the forward frame.&nbsp;Firepower The Five-seven is a semi-automatic pistol that fires a 5.7x28mm round from a 20-round magazine. The Five-seven is unique in providing true armor-piercing capability in a medium-sized and medium-powered pistol. Ball and hollow point ammunition exist as well. A longer threaded barrel is available for mounting a suppressor. The effective range is a few dozen meters.&nbsp;Users The Five-seven is in use with quite a number of law enforcement and special forces units. It is mainly used in the USA and Europe. Except for Saudi Arabia, no nation adopted the Five-seven as a standard issue military sidearm.

FN57 Model 1:1 Replica Gun with Suppressor

Jouets Pistolet 

P.ammarell

REFLEXIONS WÜRFEL PUZZLE

Puzzle

Szaman

Marvel Coaster

Marvels

Smart3d by Gabriel Gomes

batman logo

Logos 

Grumpy Ol Vet Printing

Angel Christmas Ornament&nbsp;Feel free to use this as you see fit. Please don't sell the stl or 3mf files as I would like to keep them open and free. If you would like to sell the actual model that's fine too but I would ask that you consider buying me a coffee or something. My cashapp is $dejjen.

Angel Christmas Ornament

Ange

Archer

Description:A mini bartop arcade machine printed with a 3D printer is a compact and stylish device designed to provide an authentic retro gaming experience.&nbsp;Features:<ul><li>Compact Design The arcade machine features a bartop-style compact design, meaning it is small enough to be placed on a table or counter. Its reduced size makes it perfect for limited spaces, such as living rooms or desks. </li><li>4:3 Screen The arcade machine's screen features a 4:3 aspect ratio, providing an authentic retro gaming experience. This is ideal for classic games that were originally designed with this proportion, avoiding distortions and maintaining visual fidelity. </li><li>High-Quality Sanwa Controls The control system incorporates a joystick and buttons from the Sanwa brand, renowned for offering some of the best controls in the arcade machine market. Sanwa joysticks are known for their smoothness and precision, providing a precise and comfortable gaming experience. </li><li>Connections and Connectivit It includes 2 USB ports for easy connection to other devices and peripherals such as additional controllers. </li><li>Wide Game Compatibility The machine is compatible with a wide variety of retro games thanks to its versatile design. It can emulate systems such as NES, SNES, Sega Genesis, MAME, and more, offering users a broad selection of classic titles. </li><li>Customizable LED Lighting The arcade machine can include customizable LED lighting to add an attractive visual touch. The LEDs can be adjusted to different colors, creating a retro and modern atmosphere at the same time. </li><li>Integrated Sound System with Powerful Subwoofer The mini arcade machine features an integrated sound system that includes a powerful subwoofer. This subwoofer speaker enhances the sound quality by providing deep and powerful bass. This feature contributes to a more immersive gaming experience, bringing retro sound effects and music to life with exceptional audio quality, adding an extra element of realism to the gaming experience. </li><li>Assembly Manual Complete manual that provides detailed instructions for the assembly of the machine, covering both the assembly of the printed parts and the connection of the electronics.</li></ul>&nbsp;&nbsp;&nbsp;Links to electronic parts (Click on the images to go to the link) Updated 27-12-2023The links only work from the website, the Handy app only opens the images<ul><li>LG Display LCD 4:3 1024x768 9.7" LP097X02 KIT Select item “AudioDrive A and LCD” <a target="_blank" href="https://www.aliexpress.com/item/4000525667758.html" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/384714/2023-12-27_61893dad990928.png"></a></li></ul>&nbsp;<ul><li>Power supply 12v 2A 24W <a target="_blank" href="https://www.aliexpress.com/item/1005004233586635.html" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/384714/2023-12-27_6ad9178c79acd.png"></a></li></ul>&nbsp;<ul><li>Power supply 12v 12.5A 150W Select item "DC12V 12.5A 150W" <a target="_blank" href="https://www.aliexpress.com/item/1305959941.html" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/384714/2023-12-27_8836fcf9d1b12.png"></a></li></ul>&nbsp;<ul><li>12V to 5V step down with micro-usb output connector Select item: Micro USB <a target="_blank" href="https://www.aliexpress.com/item/1005004983394160.html" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/384714/2023-12-27_68139de302446.png"></a></li><li>Audio amplifier board <a target="_blank" href="https://www.aliexpress.com/item/1005006187401293.html" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/384714/2023-12-27_1bbf3fb3261df8.png"></a></li></ul>&nbsp;<ul><li>Zero delay Arcade USB encoder <a target="_blank" href="https://www.aliexpress.com/item/33019816294.html" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/384714/2023-12-27_927dbe52287ed8.png"></a></li></ul>&nbsp;<ul><li>Speaker Line 3.5mm Aux Audio Noise Filter Ground Loop Noise Isolator Recommended filter to eliminate noise generated by the Raspberry Pi itself, placed between the Raspberry Pi and the audio amplifier. <a target="_blank" href="https://www.aliexpress.com/item/1005001604545947.html" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/384714/2023-12-27_fed070810def08.png"></a></li></ul>&nbsp;&nbsp;<ul><li>Subwoofer 3" 25W Select item 4 Ohm 25W Speaker <a target="_blank" href="https://www.aliexpress.com/item/32570614680.html" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/384714/2023-12-27_69bcee0cb8757.png"></a></li></ul>&nbsp;<ul><li>Speakers 30x70 5W <a target="_blank" href="https://www.aliexpress.com/item/4000127737256.html" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/384714/2023-12-27_237fe53d26f22.png"></a></li></ul>&nbsp;<ul><li>Dual USB extension <a target="_blank" href="https://www.aliexpress.com/item/32869652188.html" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/384714/2023-12-27_ba81b6469a7198.png"></a></li><li>Power plug connector with switch fused <a target="_blank" href="https://www.aliexpress.com/item/32880955914.html" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/384714/2023-12-27_62b27496b6b0c8.png"></a></li></ul>&nbsp;&nbsp;&nbsp;Installation software guide:In the following video, you can see how to correctly set up your microSD card with the Batocera environment.<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=NOdN5yiUKOE"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/NOdN5yiUKOE" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;&nbsp;&nbsp;Warning: There is an error in the materials list. The power supply described as "Power supply 12V 3A 36W S-36-12" is incorrect. The correct model for the power supply is "Power supply 12V 2A 24W S-24-12.

Printed mini arcade machine

Borne d’arcade

VRsculpts

I really love doing these crochet style models! This is a cute elephant that looks as if grandma just knitted him up in her rocking chair - except now we've replaced grandma with a 3d printer!&nbsp;Join my Patreon if you would like to sell physical copies of my designs, your support is appreciated and motivates me to create more cool stuff to share! https://www.patreon.com/VRsculpts

Cute Crochet Knitted Elephant

Jouets

Eon3d_

Super Mario Keychain 

Porte clé 

miniShev

Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: <a target="_blank" href="https://www.patreon.com/minishev" rel="nofollow noopener">https://www.patreon.com/minishev</a>Patrons have access to all my files in one place, supported miniatures, a request board, as well as commercial options! Come check it out :-)

Mesh Raptor

Figurine

Gabb.99

Crystal - Fortnite Action Figure sliced and optimized for Bambu&#39;s Matte PLA&nbsp;&nbsp;<blockquote>If you like my work and you want to support me to do better, you can buy me a coffe at the following links <a target="_blank" href="https://buymeacoffee.com/GSprint" rel="nofollow noopener">https://buymeacoffee.com/GSprint</a> <figure class="image image_resized image-style-side" style="width:16.72%;"><a href="https://buymeacoffee.com/GSprint" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000058614/design/2024-05-03_858db37117022.png"></a></figure><a target="_blank" href="https://ko-fi.com/gsprint" rel="nofollow noopener">https://ko-fi.com/gsprint</a> </blockquote>

Crystal - Fortnite

Fortnite

MaxTee

<a target="_blank" href="https://www.buymeacoffee.com/maxt" rel="nofollow noopener"><img src="https://media.printables.com/media/prints/328354/rich_content/bf7410f2-4e3d-4409-b318-6bc4c2cb3f55/thumbs/cover/800x225/png/bmc-button.webp"></a><a target="_blank" href="https://www.buymeacoffee.com/maxt" rel="nofollow noopener">https://www.buymeacoffee.com/maxt</a>&nbsp;----------------------<h4>2 versions in one package:</h4><ol><li>Without a recycle logo on the side</li><li>With a recycle logo on the side</li></ol><h4> Why should you use this model and not the others?</h4><ul><li>It won't break, ever (as long as you use it for the trash bag rolls)</li><li>The bag roll will never fall out through one of the sides</li><li>The bag roll is very easy to pick up</li><li>Enough extra spacing to fill a 60mm Ø bag roll without a problem, but you can resize the model as you please to fit bigger bag rolls</li><li>Can be used to accommodate any length of the bag rolls by simply spacing the left and right sides out as needed (I suggest adding an extra 0,5cm on each side of the bag roll)</li><li>Can be mounted using double-sided tape or screws</li><li>Because you've just spent a minute reading the reasons why to use this particular trash bag roll holder and not the others. If you're still here, we know you mean business - you need a solution that just works. This holder got you covered!</li></ul> The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish Print: 0.2-0.3mm Nozzle: 0.4mm Perimeters: 3 (much more important vs infill percentage!) Support: Not required Brim: Not required Infill: 15-30% Fill pattern: Support Cubic Happy Printing!

Slightly Over Engineered Trash Bag Roll Holder

Utile

Ali_Kaa

Vase

SavagePat

I made a remix of <a target="_blank" href="https://www.thingiverse.com/thing:5154830" rel="nofollow noopener">https://www.thingiverse.com/thing:5154830</a> to function as a tree topper for our christmas tree.

Sorting Hat Harry Potter Christmas Tree Topper

Harry Potter

SK07 Skipper07

I made this fruit basket, I hope you like it,there is both the variant with the base and the variant without, the choice is yours.

Fruit basket

Cuisine 

mcginnis83

Remixed version of the Terminator skull

Terminator Pencil Holder

Terminator

squinn

This print-in-place locking bag clip has been designed so that it can be printed without supports, has a fun curvy shape, uses an outward angled handle for easier one-handed use, and is a nice size at just under 6 cm when closed.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3485677045/draft/2023-09-21_kei37ynb43g3.gif"></figure>I'd recommend you set the “Strength→ Wall Loops" option to at least 5 for increased strength. In addition to the STL, I'm also attaching the Fusion360 file if you'd like to make adjustments.&nbsp;The original “Cam Lock Bag Clip.stl” (which I'd still recommend you start with if you're printing in PLA) is designed with a .2 mm tolerance around the pivot joints. If you have trouble with the plastic fusing in your print conditions though or are printing in other materials - such as PETG, I've now also attached two versions that increase the spacing tolerance slightly (.3 mm and .4 mm) which you could use as an alternative.&nbsp;This is a complete from-scratch design, but there are many great cam locking clips. Although notably different, I've marked this model as a remix of the very cool model that ‘jfedor’ did which used a similar approach for making a clip printable without requiring supports (which itself was a remix of Andrei's popular version that does require supports).

Curvy Cam Lock Bag Clip

Clips

A portable cable organizer which is setup as an easy print-in-place and includes a knob on the side for conveniently winding up the cable when you're ready to pack it away.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/76375/2023-09-13_fd01d80e216de.gif"></figure>This model is an easy print that requires no supports, and three different sizes are provided to accommodate cables of different lengths. If you're not sure which to choose, I'd recommend starting with the “medium” size.&nbsp;After printing, you'll want to place the cable within the groove at its halfway point, close the lid (which is intentionally designed to close tightly), wind up the cord clockwise using the handle, and then extend by simply grabbing the cable by both ends.&nbsp;Update 2023-09-13:&nbsp;Alternative smooth-sided versions of all three sizes have now been added, and also the handle design was slightly adjusted to add a small fillet and chamfer to decrease the bridge distance. Here's a close-up picture of the updated handle on the knurled and smooth-sided versions:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/76375/2023-09-13_e75ea621224d08.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/76375/2023-09-13_68f2b35a6774b8.jpg"></figure>&nbsp;

Portable Cable Organizer / Winder

Organisation des câbles 

Print4Gods

THX @qgepbiz for the original, which inspired me for this remix <a target="_blank" href="https://www.printables.com/de/model/449970-minimalistic-xbox-controller-stand" rel="nofollow noopener">Minimalistic Xbox Controller Stand von agepbiz | Kostenloses STL-Modell herunterladen | Printables.com</a>Simple and clean looking Xbox Controller Standfits 8x3mm anti slip rubber pads (optional)I Add the Big Logo No raft Support Structures for best results where the rubber pads are 0,1-0,2mm layer heightPlease like and follow for more Gaming and Xbox / Playstation Stuff-----------------------THX @qgepbiz für das Original, das mich zu diesem Remix inspiriert hat <a target="_blank" href="https://www.printables.com/de/model/449970-minimalistic-xbox-controller-stand" rel="nofollow noopener">Minimalistic Xbox Controller Stand von agepbiz | Kostenloses STL-Modell herunterladen | Printables.com</a>Einfacher und Sauberer lookEinfacher und sauber aussehender Xbox-Controller-StänderPassend für 8x3mm Anti-Rutsch-Gummipads (optional) Stützstrukturen für beste Ergebnisse dort, wo die Gummipads sind 0,1-0,2mm Schichthöheich habe das Model mit glow in the dark sparkle gedruckt &nbsp;Bitte liken und folgen Sie für mehr Gaming und Xbox / Playstation Stuff

Smooth and clean Xbox Controller Stand Series X / Series S

Xbox

ShakaStudio

You can mix and match any colors.I suggest use:Color 1 : BlackColor 2 : Dark Hue ColorColor 3 : Light Hue ColorColor 4 : White&nbsp;Print at 100% infill with a layer height of 0.16mm with a base layer of 0.24mm&nbsp;Swap Instructions: Start with Matte Black At layer #12 (2.88mm) swap to Red At layer #16 (3.2mm) swap to Fl Red At layer #21 (3.6mm) swap to White for the rest.

Tiki Coasters - 4 Colors - Hueforge Filament Painting

fay3dlab

This is my entry to the flying object competition.. So i have been brainstorming of a design i can make for the competition and i knew i will make a suspended model for it.. But to make it different than my usual suspended model i need to add another element.. that's where the tensegrity comes in.. Tensegrity is basically a model that is floating solely by the tension integrity from the weight of the model itself.. in other words.. the X-wing will look like its floating and only supported by the suspended strings.. Like all my suspended model.. it will be printed in one piece except for the 4 back thruster engine.. that needs to be installed after print.. Once printed.. you need to be very careful when getting it off the bedplate since unlike other suspended model.. this one is held by very little strings.. the wings are held by 10 strings in total..&nbsp;I have also prep the model so that you can easily paint parts for multicolor prints.. <img src="https://makerworld.bblmw.com/makerworld/draft/378390/2023-12-02_24f73bb26f471.png"> I've made the model small in size cause of the weight of the x-wing that the strings will have to bear.. and so that our A1 mini owners can join in the fun of printing this suspended tensegrity modelOne important thing to remember is to set the wall generator to arachne from classic.. this will make the slicer print the strings..I hope you guys have fun printing this suspended tie adv fighter

Suspended Tensegrity X-Wing

Star Wars

IceGabrielito

EDIT: New version ----→ HUGE Pikachu (24 hours, 24 cm tall)&nbsp;This is a remix of a Pikachu. I scaled it and colored it. The tail is just yellow in order to use one AMS.&nbsp;IMPORTANT: be careful when you remove tail supports because the tail is fragile and you'll break it.&nbsp;&nbsp;

Colored Pikachu (HUGE and SMALL VERSION) Pokemon

Pokémon 

camillabertrand

Tree holder for any kind of jewelries and rings, very simple to print. No supports needed.

Tree rings and jewelries holder

Arbre à Bijoux 

Markus710

Hello,I made this jewelry box for my girlfriend. So she can store rings, Earrings and other stuff like necklace.&nbsp;I made inputs for little magnets that the Drawers shut in a straight line. You need 16 of these. I used this one, but you can use any other magnets that fit in the holes. <a href="https://www.amazon.de/gp/product/B07T13H3R5/ref=ppx_yo_dt_b_search_asin_image?ie=UTF8&psc=1" rel="nofollow">Magnets</a> I made a version for 6x2mm Magnets. I made a version for 6x2.7mm Magnets too. If you need any other magnet size, pls comment it and i will make an update on the model if its possible. &nbsp;It Should be possible to print every thing without support. I had no problems printing it without support on my bambu lab. &nbsp;You need four drawers. Put them above each other and glue the axis and top in place. If you want the drawer for Rings and earrings you need:<ul><li>2x Every Earring holder</li><li>1x TPU Ring holder left</li><li>1x TPU Ring holder right</li><li>1x The Drawer for rings and earrings </li></ul>I would print the Ringholders in TPU that the rings get no scratches and are easy to put in and remove.

jewelry box

Boites à Bijoux 

cruse2382

PLEASE USE MY PROFILE "FAST" IS JUST BIGGER LAYERS AND WILL NOT WORK AS WELL&nbsp;&nbsp;simple christmas decoration.

Christmas decorative tree 

Christmas

jpbruce

<h2>Horizontal Magsafe and AppleWatch Stand</h2>This is a combined MagSafe iPhone and AppleWatch charging Stand that holds the phone horizontally to take advantage of the new StandBy mode in iOS 17.All cable cutouts fit both USB-A and USB-C cables and all models are compatible with all iPhones that have MagSafe and all AppleWatch models.Different versions of this design by me can be differentiated by the version number (just in front of the "M") while different suffixes indicate different variants of the model at the end of the file name.<h4>Available design variants:</h4>Four variants of V5 are available, and for each variant small and large bezel sizes are available as separate print profiles:<ol><li>OriginalDesign: This is my original compact design, only allowing the phone to be held horizontally</li><li>VerticalPhone: This version is a bit longer and allows the phone to be held vertically, adding a third camera bump cutout for this position (requested by <a target="_blank" href="https://www.thingiverse.com/thing:6102038/comments#comment-6879287" rel="nofollow noopener">DonWhiteside</a> on Thingiverse).</li><li>2xMagsafe_noWatch: This is a version that replaces the Apple Watch charging spot with a cutout for a second MagSafe puck, e.g for charging your AirPods (requested by <a target="_blank" href="https://www.printables.com/de/model/589461-horizontal-magsafe-standby-applewatch-stand/comments/1147373" rel="nofollow noopener">m_reiner</a> on printables).</li><li>OnlyPhone: This is a version that removes the Apple Watch charging spot, not replacing it with anything if you don't need it (also requested by <a target="_blank" href="https://www.printables.com/de/model/589461-horizontal-magsafe-standby-applewatch-stand/comments/1147373" rel="nofollow noopener">m_reiner</a> on printables).</li></ol>If you expect more shrinkage on your Filament/Printer and would like a larger tolerance around the MagSafe-Puck, check out the 04mmTolerance Versions on my <a target="_blank" href="https://www.printables.com/de/model/589461-horizontal-iphone-magsafe-standby-applewatch-stand" rel="nofollow noopener">Printables</a>. You can also find the older Versions 03 and 04 there if you want them.<h3>Update History:</h3>Update 17.10.2023&nbsp;SmallBezel versions of each of the original four variants are now available.<h4>Update 05.10.2023</h4>Version 05 is out! This Update adds a retaining mechanism in the cable channels on the bottom of all models. You need a bit of force to get the cables in, but it is easily possible and leads to secure retention in the channels, preventing them from sticking out. The AppleWatch Charger mount is also 3mm taller to allow for AppleWatchUltras with cases to better fit.I also added a new version of the design: "SmallBezels". This version has smaller bezels around the MagSafe Puck for those wishing for a more minimalistic design. Due to the smaller bezel, the cable for the MagSafe-Puck is no longer fully contained in the model.<h4>Update 28.09.2023</h4>I've replaced all raw files and print profiles with versions that have a 0.2mm smaller tolerance on the MagSafe ring (now only 0.2mm bigger than the puck instead of 0.4mm), as the fit wasn't quite as snug as I wanted (I guess the X1C is just too dimensionally accurate compared to my old printer).<h4>Update 25.09.2023</h4>Version 04 is out! This is a slight redesign of the edges, while also consolidating the naming scheme.&nbsp;<h3>Miscellaneous</h3>I printed this in GlowInTheDark Blue PLA which looks very nice at night.If you want any other file types for a remix or something else just leave a comment and I'll do my best to provide them.

Horizontal Magsafe iPhone (StandBy) & AppleWatch Stand

Iphone

braga3dprint

This Deadpool bust low poly model is a stunning 3D print that is perfect for any Marvel or Deadpool fan. It's a remix of the <a href="https://www.printables.com/model/36689-deadpool-bust-remastered-supportless-edition-stl" rel="nofollow">original design by Eastman</a>, with a low poly style that gives it a unique and eye-catching look. The model is optimized for FDM printing and has been designed to print without any support structures.Overall, this Deadpool bust low poly model is a fantastic 3D print that is both fun and challenging to make. Whether you are a fan of the character or just looking for a unique and stylish decoration piece, this model is definitely worth considering.

Deadpool Bust Low Poly

Buste 

CCFDIY

伸缩唐横刀（Telescopic Tang horizontal knife）