JDuncan1028

nick

This lid is designed for the Solo Stove Mesa Tabletop Fire Pit. It provides a snug fit without scratching the Mesa&#39;s surface, yet remains compact enough for the whole unit to be stored in the travel bag. When storing, it best fits with the burn ring turned upside down. The lid is there to keep any leftover ashes from spilling out while the fire pit is in the travel bag.&nbsp;This is not designed for the XL version but could be easily modified and scaled for it. Additionally (it should go without saying…), this should only be used on a cool, unlit can. &nbsp;Designed in Fusion 360 and tested on an A1 Mini.

Lid for Solo Stove Mesa

work

Diggle

A simple and cool way to catalog your filament collection!Filament swatches are BORING! Print these mini spools and display your collection easily with the included gridfinity holder! These fit perfectly inside an IKEA Alex top drawer!There is a space left for a label up to 18mm in height! but you can also add your own text in slicers to print it on if you don't have a label maker!

5g Mini Spool Filament Swatch (Labels/Gridfinity Compatible)

Swatches

上进的up主

Millennium Falcon Wireless MouseCool Millennium Falcon Wireless Mouse When 3D printing, it is recommended to apply glue to the hot bed, and the installation steps are similar to the official wireless mouse Attention: The left and right buttons on the mouse shell are connected to ensure printing stability. After printing, it needs to be manually removed酷炫的千年隼号 无线鼠标 3d打印的时候建议热床涂胶水，安装步骤和官方无线鼠标类似 注意：鼠标外壳左右键加了连接部分，以保证打印的稳定性，打印完成后需要手动去除<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000472109/design/2024-05-24_2852e35a12b15.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000472109/design/2024-05-24_64ff9bb45bce8.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000472109/design/2024-05-23_8e9c9fdbe0e8d.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000472109/design/2024-05-23_cefded70ec816.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000472109/design/2024-05-23_3b25982156d1.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000472109/design/2024-05-23_008b9210b278f.jpg"></figure>

Millennium Falcon Wireless Mouse

Wireless Mouse

SnapPrint3D_SuperCrazyPrints

Sign up Membership to get 15+ models every month. All models 3D Print Without Supports and (3MF,STL) file ready! <a target="_blank" href="https://www.supercrazyprints.com/" rel="nofollow noopener">https://www.supercrazyprints.com/</a>&nbsp;Check out my other models: <a target="_blank" href="https://cults3d.com/en/users/Scrazyone_SnapPrint3D/3d-models" rel="nofollow noopener">https://cults3d.com/en/users/Scrazyone_SnapPrint3D/3d-models</a>

Pokemon-Pikachu(NO SUPPORT)

Pokémon 

Ragnar 3D

Simple woven basket printed without supports.&nbsp;

Woven Basket 1

woven

Libro

Cookie cutters Legoheads

cookie cutters

BiggBadaBoom

My son wanted a dice tower of his own as he had been using an early version of one of my dnd boxes for rolling dice.  I quickly put this together for him and had it printed in a couple hours. The base and the tower lock together so they don't move around.&nbsp;Tower:<ul><li>Overall size: 99.68mm tall x 51.37mm wide x 51.37mm deep</li><li>Supports needed<ul><li>Suggest blocking supports on the underside of the tower as they are a pain to remove</li></ul></li></ul>Base:<ul><li>Overall size: 27.69 tall x 59.39 wide x 119.39 deep</li><li>No supports needed</li></ul>

Simple Stone Dice Tower

Dice Tower

SWElite

I like to read before going to sleep. When I get tired, I take my glasses and place them on my nightstand, along with my ring. At night, if I need to find them without turning on the light, I knock them out almost every time.To solve this problem, I remixed this stylish eyeglasses holder by adding a groove for my ring. If you need to hold both your ring and the glasses, assemble the stand with the groove up. If not, place the groove on the bottom.The assembly of the two parts is tight fit. Do not try to increase the clearance between them. No support required.&nbsp;If you have more than one ring, you might need the Ringosaurus: <a target="_blank" href="https://makerworld.com/en/models/57828#profileId-59525" rel="nofollow noopener">https://makerworld.com/en/models/57828#profileId-59525</a>&nbsp;Pair it with the other pieces from the Vertical Decor Collection:<ul><li>Slender Striped Vase: <a target="_blank" href="https://makerworld.com/en/models/91147#profileId-97491" rel="nofollow noopener">https://makerworld.com/en/models/91147#profileId-97491</a></li><li>Fat Striped Vase: <a target="_blank" href="https://makerworld.com/en/models/91133#profileId-97479" rel="nofollow noopener">https://makerworld.com/en/models/91133#profileId-97479</a></li><li>Candleholder Tall: <a target="_blank" href="https://makerworld.com/en/models/91168#profileId-97509" rel="nofollow noopener">https://makerworld.com/en/models/91168#profileId-97509</a></li><li>Candleholder Short: <a target="_blank" href="https://makerworld.com/en/models/91158#profileId-97497" rel="nofollow noopener">https://makerworld.com/en/models/91158#profileId-97497</a></li><li>Candleholder Double: <a target="_blank" href="https://makerworld.com/en/models/91181#profileId-97517" rel="nofollow noopener">https://makerworld.com/en/models/91181#profileId-97517</a></li><li>Tissue Box Holder with Bottom Lid (Scotties): <a target="_blank" href="https://makerworld.com/en/models/73097#profileId-77641" rel="nofollow noopener">https://makerworld.com/en/models/73097#profileId-77641</a></li><li>Tissue Box Holder without Bottom Lid (Scotties): <a target="_blank" href="https://makerworld.com/en/models/73057#profileId-77633" rel="nofollow noopener">https://makerworld.com/en/models/73057#profileId-77633</a></li><li>Tissue Box Holder without Bottom Lid (Kirkland): <a target="_blank" href="https://makerworld.com/en/models/67057#profileId-70913" rel="nofollow noopener">https://makerworld.com/en/models/67057#profileId-70913</a></li><li>Weightless Spheres: <a target="_blank" href="https://makerworld.com/en/models/99069#profileId-105629" rel="nofollow noopener">https://makerworld.com/en/models/99069#profileId-105629</a></li><li>Weightless Teardrop Vase: <a target="_blank" href="https://makerworld.com/en/models/106259#profileId-113422" rel="nofollow noopener">https://makerworld.com/en/models/106259#profileId-113422</a> </li></ul>Door Frame Toppers:<ul><li>Downhill Skier Skier Door Frame Topper: <a target="_blank" href="https://makerworld.com/en/models/106214#profileId-113390" rel="nofollow noopener">https://makerworld.com/en/models/106214#profileId-113390</a> </li><li>Tail-grabbing Skier Door Frame Topper: <a target="_blank" href="https://makerworld.com/en/models/126631#profileId-136909" rel="nofollow noopener">https://makerworld.com/en/models/126631#profileId-136909</a> </li><li>Climber Door Frame: <a target="_blank" href="https://makerworld.com/en/models/138127#profileId-150395" rel="nofollow noopener">https://makerworld.com/en/models/138127#profileId-150395</a> </li></ul>Also:<ul><li>Ringosaurus bigger and deeper: <a target="_blank" href="https://makerworld.com/en/models/57828#profileId-59525" rel="nofollow noopener">https://makerworld.com/en/models/57828#profileId-59525</a> </li><li>Unlocked Level Cake Topper: <a target="_blank" href="https://makerworld.com/en/models/104796#profileId-111855" rel="nofollow noopener">https://makerworld.com/en/models/104796#profileId-111855</a> </li><li>Biggest Gift Box: <a target="_blank" href="https://makerworld.com/en/models/84040#profileId-89836" rel="nofollow noopener">https://makerworld.com/en/models/84040#profileId-89836</a> </li><li>Large Copter Propeller: <a target="_blank" href="https://makerworld.com/en/models/64664#profileId-67877" rel="nofollow noopener">https://makerworld.com/en/models/64664#profileId-67877</a> </li></ul>

Eyeglass and Ring Holder

eyeglasses holder

Prometheus3DP

Inspired by Toysmith&#39;s Monster Feet! Leave your very own dino-prints in the sand at the beach! Feed a rope or paracord through the hole in the side of the print to create a lasso to hold onto while you stomp your way through the beach! Have everyone at the beach wondering what kind of animal made these crazy footprints!

Dino Sand Prints - Leave your own Dinosaur print!

Outdoors

JamesThePrinter

***Christmas and Halloween Cases are identical - Just add your new scenes*** Light up different Christmas scenes in this display. An LED tea light candle is required. &nbsp;The display features a door that opens to allow access to the tea light. Use a section of 1.75mm filament inside the hinge to connect the door to the case. Depending on your printer/setup, this hole may be on the tight side or a bit loose. If tight, drilling out the hole may help. If it is slightly oversized, I suggest melting the end of the filament piece with a soldering iron or lighter.&nbsp;I have included a separate liner. This allows you to print the case in a dark color, but line the inside with a lighter color to allow for more reflection of light outward, making everything brighter.&nbsp;For a complete display, you will need:<ul><li>1x Case</li><li>1x Door</li><li>1x Knob</li><li>1x Snap Ring</li><li>1x Liner - Optional</li><li>1x (minimum) Scene - You can easily remove the snap ring to swap out scenes as desired</li></ul>Check out the rest of my Christmas models <a target="_blank" href="https://makerworld.com/en/u/1360890085/collections/69417" rel="nofollow noopener">here</a>!&nbsp;<h4>Print Settings</h4>No special setting are needed for the display case, door, knob, snap ring and liner. &nbsp;Scenes Print SettingsPrint the scenes with 100% infill. The scenes also require color changes:<ul><li>The bottom 3 layers <ul><li>white or clear</li></ul></li><li>The top 2 layers <ul><li>should be black for most scenes</li><li>Blue works well for the snowflake</li><li>If you have an MMU/AMS, other colors can be added as well</li></ul></li></ul>&nbsp;<h4>Assembly</h4>Glue the knob into the door. Only a very small amount is needed.<figure class="image image_resized" style="width: 535.5px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000041177/design/c2ff42e5-4f47-41e8-8905-382ea68f6cfe.webp"></figure>Put the door in place and latch it. Use a 20mm piece of 1.75mm filament to connect the 3 sections of the hinge. If the filament goes in very easily, it may be a good idea to heat up the top end of the filament ‘pin’ and press it flat. This will prevent the pin from falling through later on.<figure class="image image_resized" style="width: 535.5px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000041177/design/230e3f93-7a69-4e0a-8026-060800c5ea3a.webp"></figure>Open the door. Insert a scene into the opening (image facing outward). Insert the snap ring behind the scene by gently squeezing and placing it into the groove (see red arrow below).<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000041177/design/164034e6-1484-4bc7-a435-e0a956565206.webp"></figure>If you are using a liner, slide it inside the case. This may be a tight fit. Go slowly and be sure to slide it in evenly on all sides.<figure class="image image_resized" style="width: 535.5px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000041177/design/96f9e1cf-982a-4e8f-be08-881a51506e3b.webp"></figure>Turn on your tea light and close the door.&nbsp;&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/JamesThePrinter" rel="nofollow noopener">Buy Me A Coffee</a>&nbsp;The following filaments were used in the pictures above:Display Cases<ul><li>Bambu Lab Matte Charcoal PLA</li><li>Bambu Lab Matte Dark Green PLA</li><li>Bambu Lab Matte Dark Red PLA</li><li>Bambu Lab Silk Gold PLA</li></ul>Liners<ul><li>Bambu Lab Matte Ivory White PLA</li><li>Bambu Lab Basic Bambu Green PLA</li></ul>Scenes<ul><li>Bambu Lab Matte Ivory White PLA</li><li>GIANTARM Transparent Clear PLA</li><li>Bambu Lab Matte Charcoal PLA</li><li>Bambu Lab Matte Mandarin Orange PLA</li><li>Bambu Lab Matte Lemon Yellow PLA</li><li>Bambu Lab Matte Marine Blue PLA</li></ul>

Christmas Tea Light Display

Christmas

darwaishbndy

Introducing our functional barn birdhouse model, ideal for 3D printing on Cults 3D! This STL file is crafted for real-world use, providing a cozy and charming home for birds in your outdoor space. Designed to be mounted outside, this birdhouse is perfect for welcoming feathered friends into your garden or yard. Enjoy the beauty of nature as birds find refuge in this intricately designed and functional birdhouse, adding both aesthetic appeal and practicality to your outdoor environment.

CUTE BARN BIRDHOUSE

Birdhouses and Feeders

Vixvvo 3D

commercial licenses will be accessible through my Patreon page Including every other model designed, 'Vixvvo3D', at the affordable rate of $6 per month. I aim to consistently post and model new content on a weekly basis. Your support on <a target="_blank" href="https://patreon.com/Vixvvo3D" rel="nofollow noopener">https://patreon.com/Vixvvo3D</a> is greatly appreciated!&nbsp;I've noticed that Stanley Cups have become quite popular nowadays. I present to you guys a keychain version of the Stanley Cup that I've made. you can use multiple colors without any issues! (The mf3 file is corrected with the right support for each items)

Stanley Cup Keychain

keychains

Freddie

Mini Flexible dinosaur&nbsp;I printed on the A1 mini @ 80% and looks pretty good. Please let me know if you have any issues with the print, this is my first flexible model I&#39;ve created and I&#39;m still learning.

MINI FLEXI DINO

Animals

mail.iou

Reverse Blade SwordThis is a telescopic knife inspired by the reverse-blade sword (逆刃刀) used by Himura Kenshin,the protagonist of the Japanese manga Rurouni Kenshin.The design is simple and easy to print, I hope you will like it.&nbsp;A1 mini users or friends who like small anti-blade swords, please do not use a third party to upload a reduced model Profile, because the sword will become very short. Please go to <a target="_blank" href="https://makerworld.com/en/models/114630" rel="nofollow noopener">https://makerworld.com/en/models/114630</a> to download a model redesigned specifically for MINI.&nbsp;update 01/12/2024 This knife is a one-piece printed design. If you are not sure whether the filament you bought can print this work well, you can refer to my new creation "Nichirin Samurai Sword". This work uses a split printing design to facilitate future maintenance and blade replacement. Nichirin Samurai Sword : <a target="_blank" href="https://makerworld.com/en/models/135353" rel="nofollow noopener">https://makerworld.com/en/models/135353</a>&nbsp;Notice It is recommended to use PLA+ and Textured PEI Plate for printing. If the viscosity of the plate of your 3D printer deteriorates, be sure to use glue to increase the grip to prevent the printed part from falling off halfway and wasting filament.&nbsp;After printing, please remove the support at the end of the knife.<figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/411827/2023-12-29_51c8c09c32f62.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/411827/2023-12-29_60e68ce20b26b.png"></figure></td></tr></tbody></table></figure>Repair of fallen blades This work has been printed and verified on P1S, A1 printers and resized. It is currently tested using three materials: Bambu PLA, eSUN PLA+, and eSUN ePLA-Matte. The blade surface can be freely expanded and contracted without falling off. However, since PLA material is not resistant to high temperatures, if it is stretched and swung back and forth many times quickly, it will cause the blade to be heated and expand, causing the blade to be thrown out. At this time, you can repair it with a simple method. Please use a tape with high viscosity that is not easy to fall off, such as Acetate Cloth Tape. Stick it on the entrance where the blade falls off. The amount of tape can be adjusted to increase or decrease the size of the enlarged hole. Then push the blade down and plug it back into the entrance to repair it.<figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/411827/2023-12-30_9ae8cbf98f5af.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/411827/2023-12-30_59e2edca56a86.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/411827/2023-12-30_75ce6d29cda6e.png"></figure></td></tr></tbody></table></figure> &nbsp;

Reverse Blade Sword / Samurai Sword

Retractable 

SMichaud

Tools for kid! very usefull for motricity helpGlue saw, hammer and screwdriver

Tool for kid

Kids Stuff

ale_elli

Here it is another item for Star Wars lovers! I made it to fit it with with IKEA 3.5 cm vases like this ones <a target="_blank" href="https://www.ikea.com/it/it/p/cactaceae-pianta-da-vaso-mini-cactus-90535106/" rel="nofollow noopener">https://www.ikea.com/it/it/p/cactaceae-pianta-da-vaso-mini-cactus-90535106/</a> ; if you want to use other vases/plants, remember to adapt it!This pot alone is beautiful, but I think the best is to put beside it also Yoda and the Darth Vader vase<figure class="image image_resized" style="width:486.617px;"><img src="https://makerworld.bblmw.com/makerworld/draft/601538/2024-02-28_493a9814e4b4c.jpeg"></figure>You can find it hereDARTH VADER: <a target="_blank" href="https://makerworld.com/en/models/210184#profileId-230060" rel="nofollow noopener">https://makerworld.com/en/models/210184#profileId-230060</a> YODA: <a target="_blank" href="https://makerworld.com/en/models/210217#profileId-230079" rel="nofollow noopener">https://makerworld.com/en/models/210217#profileId-230079</a>&nbsp;Enjoy!

Storm Trooper Mini Vase

Planters

The Gooser

My wife stores extra toilet paper rolls on top of the toilet, or even on the shelf! Well, I got a new A1 mini, so I saw an opportunity here, and designed a couple of P&#39;s to make a POOP…. And sometimes you can make a long POOOOOP as well, just adding more rolls!&nbsp;Just a quick prints of just under 1 hour and 28 grams of PLA.&nbsp;X1C plate has both P&#39;s on one plate with 1:31 runtime, and 70gA1 mini has 2 print plates - one each for the P&#39;s. Each P is around 1 hour and 36/34g&nbsp;Designed for 5.0&#34; toilet paper rolls. There is a 2&#34; plate the rolls sit on that hold the P&#39;s up.&nbsp;Let me know if you want anything else!&nbsp;🦾🤩Don&#39;t forget to leave an awesome rating and post a picture of your great make! 🙏😍👍 If you like this design and want to support me - please boost this design (click on the small Rocket 🚀 or „BOOST“ button) 🙏👍  Happy printing and feel free to check my other <a target="_blank" href="https://makerworld.com/en/@TheGooser" rel="nofollow noopener">BambuLab designs</a>! 🖐️😃&nbsp;Important when buying the design: This is my design and copyright to me, TheGooser. It is not to be remixed or modified other than to reduce or enlarge the print for your personal preference. The file is never allowed to be shared or altered by anyone other than myself. Private use only gives you to the right to print the design for your own personal use and not to sell the item being printed. By downloading you agree to this. By printing you agree to this. By purchasing you agree to this.

POOP Toilet Paper Roll Holder Storage Display

Bathroom

CF3D Designs

Ohio State Buckeyes Block O Sign. Prints in 2 parts to press fit together. There is teeth in the back to hang on the wall.&nbsp;Printed in PLABambu Matte Scarlet RedBambu Basic BlackVoxel PLA Plus Cool White

Ohio State Buckeyes Block O Sign

Sports 

LordCGD

This is a loser trophy I made for a March Madness tournament.

Poop Basketball trophy

Trophy

BBN GRAFX

Letters W - Z of Alphabet Lore. Each letter is colored up to 4 colors and ready to print

Alphabet Lore Letters W - Z

Alphabet Lore

DesignCraft

Christmas Elf Nutcrackers are the perfect way to bring holiday cheer to family and friends!&nbsp;Features:<ul><li>Two designs (Alvin and Buddy)</li><li>22 inches tall (56 cm)</li><li>Friction connectors (no glue required, but you can if you'd like)</li></ul>Instructions:<ul><li>There are two elf designs, Alvin and Buddy. There is a print profile for each elf design containing multiple build plates for each group of parts. There is also a common print profile containing parts that are required for either design you choose.</li><li>Color changes for the legs (Alvin design), hands (Buddy design), and both hat models are set in the print profiles at the respective layer heights. You'll see the color changes once you Slice plate / Preview in Bambu Studio.</li><li>If you're printing from the raw files I've grouped them into folders accordingly. One note is that any files with the _alt suffix are Buddy's variations of certain parts.</li><li>Some parts are interchangeable if you'd like to create your own design: hat, neck, belt, gloves / hands, skirt.</li></ul>Considerations:<ul><li>Brims are disabled globally in the print profiles. I have most plates set to Textured PEI which works well for me on the Bambu Lab X1C as to where a brim isn't required. Also, using a brim on a Textured PEI plate tends to fuse it to the part. If you know your printer and plates you should be able to decide if you need a brim for certain parts so please consider this when printing. The only part that does allow for a brim in the print profile is the belt buckle of the Buddy design which is set to use a Cool plate. With that said the knees and belt buckle of the Alvin design are also set to a Cool plate because I printed them with Silk PLA which I've had issues with removing on Textured PEI plates.</li></ul>Connectors:<ul><li>Size C connectors are used to connect the Boots or Shoes to the base.</li><li>Size B connectors are required for both sides of the Knee part (Alvin design), both sides of the Belt (both designs), and both sides of the Neck part (both designs).</li><li>Size A connectors are for the remaining parts.</li></ul>Diagrams:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/270016/2023-11-26_b1f971ed87527.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/270016/2023-11-26_80388afe393b2.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/270016/2023-11-26_5cc7c4bb7a1e9.png"></figure>&nbsp;

Christmas Elf Nutcrackers

Christmas 

Magrin

From one of the most iconic moments in The Lord of The Rings.&nbsp;The perfect sign to hang on the door before your mother in law comes visiting!&nbsp;Made with make my sign

Lord of the Rings: You Shall Not Pass

Nerdy

Spike_Mix

Classy utensil organizer consisting of three cylindrical compartments&nbsp;To legally sell PRINTED models, you may obtain my permission through this link:<a target="_blank" href="https://www.patreon.com/SpikeMix3D" rel="nofollow noopener">https://www.patreon.com/SpikeMix3D</a>

Countertop Utensil Organizer

Kitchen

Castro

Crayon holder that looks like a crayon! My daughter likes to destroy the boxes so i made this to hold them. Would make a great gift for teachers and students alike.it does have some bleed over from the color changing and probably the yellows lighter color didn't help, I'm thinking a green crayon or other darker colors would do better but for my kids this works great. Happy Printing!!!

crayon container

Cool Stuff

3DPmom

<figure class="media"><div data-oembed-url="https://youtu.be/1RCOVTLtOgA"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/1RCOVTLtOgA" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>Here is a St. Patrick's Day pot of gold with a little extra treasure inside 🌈 When assembled, this slinky gains a bit of a yo-yo/kendama vibe 😂 It is actually really fun to play with and only requires simple assembly (gluing).&nbsp;3D PRINTING SETTINGS:Layer Height 0.2mmPLA works greatNo Supports needed.15-20% Infill&nbsp;Note: When you go to preview the slinky in Bambu Studio you will get a warning that states: “Warning: It seems object POG Small (or Large) Slinky has floating cantilever. Please re-orient the object or enable support generation.” You can ignore this warning. The program is recognizing the space between each layer of the slinky. That ‘space’ is intentional and necessary to be able to separate the slinky when it is done printing. It will print fine without supports:)&nbsp;Tip: I recommend multicolor filament (dual-color or tri-colored filament) or rainbow colored filament for the slinky. I used rainbow colored filament but just a heads up: to get all the colors of the rainbow in there I had to print 5-6 at a time because the color repeat on my spool was about 200g (the small slinky is ~32g and the large slinky is ~47g).&nbsp;Dimensions of Large Pot of Gold Slinky: 3 ½ in. x 3 in.Dimensions of Small Pot of Gold Slinky: 3 in. x 2 ½ in.&nbsp;How to assemble:Step 1: First, gently separate the layers of the slinky. After printing they will be lightly connected together. Gently separate them with your fingers or a non-sharp object like a butter knife. (See photo)Step 2: Next, super glue the pile of gold piece to one end of the slinky. (See photo)Step 3: Super glue the other end of the slinky to the bottom of the pot. This piece is loose inside the pot but is too big to come out. Set the pot on a small object (I used a spool of thread) to raise up the ‘bottom’ piece of pot. Apply glue to the bottom of the slinky and then attach it to the bottom piece of the pot. Setting it on a bottle/spool isn't necessary but it makes the gluing process a little easier. (See photo)&nbsp;Have fun printing!🍀

Pot of Gold Slinky (2 Sizes)

St. Patrick's Day 

VRsculpts

I really love doing these crochet style models! This is a cute elephant that looks as if grandma just knitted him up in her rocking chair - except now we've replaced grandma with a 3d printer!&nbsp;Join my Patreon if you would like to sell physical copies of my designs, your support is appreciated and motivates me to create more cool stuff to share! https://www.patreon.com/VRsculpts

Cute Crochet Knitted Elephant

Knitted

Special Printing Services

Balance tetris with two versions of box  Print 4 pieces of every tetris-piece, it will fit easily into krabicka_low. There is also krabicka_low_large for those who want more than 4 pieces in set (tested with 6 pieces of every tetris shape).I added a pause in layers of lid in the print profile, so you can change the colors of filament and make “balance TETRIS” sign in a different color. Start with color of lid, then color of sign “TETRIS”, next is color of “balance” sign and then back to color of lid. AMS version will be ready soon. I created a new version of the box, which is better designed and brings another load of fun when putting the pieces inside. <a target="_blank" href="https://makerworld.com/en/models/155382" rel="nofollow noopener">https://makerworld.com/en/models/155382</a> Enjoy

work

Swatches

Wireless Mouse

Pokémon

woven

cookie cutters

Dice Tower

eyeglasses holder

Outdoors

Christmas

Birdhouses and Feeders

keychains

Animals

Retractable

Kids Stuff

Planters

Bathroom

Sports

Trophy

Alphabet Lore

Christmas

Nerdy

Kitchen

Cool Stuff

St. Patrick's Day

Knitted

Games