Issy05

EPIQ3D

— NO SUPPORT NEEDED — Display your Bambu Lab filament swatches like a PRO The clearence between the wheel and the base are really tight (0,8mm)This is to ensure the rotational movement are as smooth as possible (with no wobble) There&#39;s 4 slots under the base, that fits 4 x Ø10x2mm rubber feet This model is printet on a stock Bambu Lab A1, with Bambu Lab PLA Basic filament.If you print this model on any other brand, and it dosnt fit directly, then i recommendsanding the swatch wheels contact points a little at a time to ensure the best fit. The slots are modelled after the injection molded swatches, so i cant say if the early 3D printet swatches will fit.<figure class="image image_resized" style="width: 43%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000497645/design/2024-06-16_11d77805c5951.png"></figure>-------------------------------------------------------------------------------------------------------------------------------------------------------- Not a remixThis model is build with the inspiration of <a target="_blank" href="https://makerworld.com/en/@BradFTBT3D" rel="nofollow noopener">Brad - FTBT 3D</a> Spinning Filament Swatch Display(<a target="_blank" href="https://makerworld.com/en/models/188119#profileId-207981" rel="nofollow noopener">https://makerworld.com/en/models/188119#profileId-207981</a>)

Filament Swatch Wheel

Swatches

KYZ Design

This was originally uploaded <a target="_blank" href="https://www.printables.com/model/384997-honeycomb-storage-wall-hsw-bambu-x1cp1p-max-wall-p" rel="nofollow noopener">here</a>, check it out to see past makes and comments--Honeycomb Storage Wall's wall piece - remixed to max out the usable plate on the Bambu X1/X1C/P1P252x248 is the biggest possible but requires a bit of tinkering to print this, see here if you want to print this one: <a target="_blank" href="https://wiki.bambulab.com/en/knowledge-sharing/print-volume-limitations" rel="nofollow noopener">https://wiki.bambulab.com/en/knowledge-sharing/print-volume-limitations</a>Otherwise, use the 252x224 one (see the slicer screenshot for where to place it on the plate)&nbsp;Check out <a target="_blank" href="https://makerworld.com/en/u/11128021/collections/18964" rel="nofollow noopener">this collection</a> for my other Honeycomb Storage Wall models including framed wall sections:&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/253223/2023-12-10_f8b815429fd9d.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/253223/2023-12-09_19d31ded4922d.jpg"></figure>&nbsp;

Honeycomb Storage Wall HSW - Bambu X1C/P1P/P1S Max Wall Piece

KlausKolbe007

HSW Buildplate holder for 5 A1 Mini Buildplates.

HSW Bambulab A1 Mini Build Plate Storage for Honeycomb Storage Wall

Build Plate Holder

Jorge Rui

<h3>Introduction and contextualization</h3>A box for spools, I know there are many out there, but for those who already know me, they know that I like to do things my own way. So, I decided to make a box for the filament spools.  What is particular about it, you may ask:<ol><li>It must be closed and provide the best possible seal (I think I&#39;ve managed to do that)</li><li>Allow its production on the Bambu Lab X, P and A1 printer&#39;s (the mini is out), and that why the model is divided in 4 parts.</li><li>Easy printing with minimal material usage, PETG and TPU, and 3 screws and corresponding nuts to create a good seal, which is necessary for insulation.</li><li>It should be aesthetically pleasing, visually communicating its function (more on this later).</li><li>Be aesthetically interesting while fulfilling functional needs (such as sealing and others).</li><li>Allow for the placement of some desiccant at the base to maintain controlled humidity levels.<ol><li>Check my <a target="_blank" href="https://www.printables.com/model/878116-desiccant-container-for-spools" rel="nofollow noopener">Desiccant container for Spools</a></li></ol></li></ol><figure class="image image_resized" style="width: 75%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467045/design/2024-05-18_jwx6iotd86ps.png"></figure>This version cannot be used to feed the printer with filament (see image bellow, serving instead as a temporary storage container and always with the accessory mentioned in the previous point to keep humidity levels low. It should last for a few weeks... The time it takes for the desiccant to become saturated depends on the humidity in your area. I recommend <a target="_blank" href="https://amzn.to/3ywHAkg" rel="nofollow noopener">silica desiccant</a>, which can be reused by heating it in an oven or microwave.For more permanent storage, you can use vacuum bags.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467045/design/2024-05-18_fsi2f6dt0gkp.png"></figure>So, here it is saying hi and taking off his hat ;)<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467045/design/2024-05-18_m7g62ayx5544.png"></figure>&nbsp;The Closing clips can represent the color and material that inside the box, the text on the clip can be edited on Bambu Studio.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467045/design/2024-05-18_j4bvn16x1kfz.png"></figure>You can choose between the version with or without the logo, chose the 3mf file that suits you best.<blockquote>For some reason, there has been a movement within the community against displaying the Bambu Lab logo on my work. In my opinion, the logo is an interesting graphic element and much like in some sports, people enjoy showcasing the brand, creating a sense of belonging to a group. While there could be many reasons for opposition, tastes are subjective, making this a trivial matter that I will not discuss more.Another point to note is that neither Bambu Lab, Prusa, nor any other company pays me to include their logo on these models. This process is an inherent artistic feature. To end this, beauty is always in the eye of the beholder.</blockquote><figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467045/design/2024-05-18_aopgdwqnicdc.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467045/design/2024-05-18_zw0sh990xfk2.png"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467045/design/2024-05-18_9evotkab6205.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467045/design/2024-05-18_kybvegq67dk5.png"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467045/design/2024-05-18_l67ul8rmcu4t.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467045/design/2024-05-18_c8y9du0irie6.png"></figure></td></tr></tbody></table></figure>And an example of a printed part with Translucent PETG from bambu labThere is a other version, prime, that was designed with the filament feed in mind, more advanced, with rollers, pneumatic adapter and other features:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467045/design/2024-05-18_xv9fv02vwmir.png"></figure>If you are “<a target="_blank" href="https://www.printables.com/@jorge_rui/store" rel="nofollow noopener">my club member</a>” you can download it <a target="_blank" href="https://www.printables.com/model/880895-spoolbox-for-bambu-lab" rel="nofollow noopener">here</a>.<h3>Printing parameters</h3>Special care has been taken to provide the models with the printing parameters already defined; however, you are free to change whatever you them if necessary. The use of multiple colors should not hinder those who do not have a multi-material printing unit, as there are only 4 color changes throughout the process. That being said, the provided 3mf files are configured for use with the AMS and changing them for printing without the AMS is up to you.  I would like to emphasize that these models cannot be distributed in any way or form; therefore, any alterations are solely for your own use. This decision stems from issues I had previously, where my work was copied extensively, leading to accusations that I had copied the models myself (my own models…)<blockquote>Some may have some special feature that you can configure to your linking&#39;s. An examples is the closing clip that you can change the text label and material color to match the spool material.</blockquote><figure class="image image_resized" style="width: 50%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467045/design/2024-05-18_i6ypksrelafw.png"></figure><ul><li>Printing material <a target="_blank" href="https://shareasale.com/r.cfm?b=2354730&amp;u=4026304&amp;m=138211&amp;urllink=&amp;afftrack=" rel="nofollow noopener">PETG and TPU</a> from Bambu Lab,<ul><li>Other material can use other materials you may prefer, like <a target="_blank" href="https://shareasale.com/r.cfm?b=2354730&amp;u=4026304&amp;m=138211&amp;urllink=&amp;afftrack=" rel="nofollow noopener">PLA</a>, but PETG can make translucent parts (not easy, but possible (very slow and hot with a nice quality filament without moister, and don&#39;t expect &#34;glass&#34; like opacity. Here you can find an exceptional example of application: <a target="_blank" href="https://www.printables.com/model/15310-how-to-print-glass" rel="nofollow noopener">How To Print Glass by Rygar1432</a></li><li>the file “SpoolBox_translucent.3mf” contains some top lids (with logo and clean) with a configuration that I think will render you the best results without taking you days to print. The one made by Rygar1432 will give you the best result, but will be a very slow print approx. 20mm/s</li></ul></li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467045/design/2024-05-18_zzqvbl8t0tfh.png"></figure><h4>Parts included that are needed to print</h4><ul><li>Base (<a target="_blank" href="https://shareasale.com/r.cfm?b=2354730&amp;u=4026304&amp;m=138211&amp;urllink=&amp;afftrack=" rel="nofollow noopener">PETG or PLA)</a>;<ul><li>Right</li><li>Left</li></ul></li><li>Top (<a target="_blank" href="https://shareasale.com/r.cfm?b=2354730&amp;u=4026304&amp;m=138211&amp;urllink=&amp;afftrack=" rel="nofollow noopener">PETG or PLA</a>);<ul><li>Right</li><li>Left</li></ul></li><li>Joints (<a target="_blank" href="https://shrsl.com/4cpo2" rel="nofollow noopener">TPU</a>)<ul><li>Volume 1 &amp; Volume 2, They include:<ul><li>Side<ul><li>Top</li><li>Bottom</li></ul></li><li>Top<ul><li>Right</li><li>Left</li></ul></li><li>4x Foot&#39;s</li></ul></li></ul></li><li>Hinge and Closing Clip (<a target="_blank" href="https://shareasale.com/r.cfm?b=2354730&amp;u=4026304&amp;m=138211&amp;urllink=&amp;afftrack=" rel="nofollow noopener">PETG or PLA or any other material you like)</a><ul><li>in total there are 2 parts, that print in place 4 bodies.</li></ul></li></ul><h4>Assembling</h4>See image on how to assemble (The exploded view may help one this, so check it)<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467045/design/2024-05-18_bega79b57gvh.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467045/design/2024-05-18_04y1zjviaeqs.png"></figure>The feet&#39;s on the base must be glued if you what to use them (recommended).If you want to add a humidity sensor, there is a configuration for that on the 3mf file included. I&#39;ve use this <a target="_blank" href="https://amzn.to/3WDsFPk" rel="nofollow noopener">temperature and humidity sensor</a>.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000467045/design/2024-05-21_4423bb8d0b54f.png"><figcaption>Box with humidity sensor</figcaption></figure><h4>Support the designer:</h4>This design is free for the benefit of the community, but If you like my designs and want to contribute, you can make a donation to <a target="_blank" href="https://www.buymeacoffee.com/designrepcom" rel="nofollow noopener">buymeacoffee </a>or <a target="_blank" href="https://www.paypal.com/donate/?business=BUM67EMDJRXSN&amp;no_recurring=0&amp;currency_code=EUR" rel="nofollow noopener">paypal, </a>or even better, join “My Club” here in printables.com, that will be greatly appreciated.Change Log<ul><li>(17-05-2024) - Initial release</li></ul>

SpoolBox 4 all

Filament Holders

AcmeArt

Update!! I’ve added most of my models for commercial use! Just not file distribution. Enjoy!&nbsp;Update!! Added a profile with multicolor painting applied.&nbsp;&nbsp;Sugar Skull sculpture thats pre painted for Multi color printing.

Sugar Skull multi color painted compatible

Skulls 

magnets

Onkelsam

simple 2d wall artEasy to attach with double-sided tape&nbsp;The small bars can be easily removed with scissors or clippers if they get in the way&nbsp;The second version is mirrored if you want the print bed surface as a visible side or if you hang the logo on a window

Super Mario jump

Marvel Puzzle

JustBe 3D Printing

I actually do print all of the models I upload and that takes a time and filament.&nbsp;Visit my Patreon (in bio or <a target="_blank" href="http://patreon.com/JustBe3D" rel="nofollow noopener">http://patreon.com/JustBe3D</a>) if you are interested in *exclusive* FREE and members only models or a commercial license to sell your physical prints of my models.&nbsp;Can be rescaled just remember not to change the Z axis.I print with a variable layer hight but just uploaded the standard 0.16 base with 0.08 layer heights. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA Kingroon Black Transmission Distance: 0.4 PLA Overture Space Gray Transmission Distance: 1.4 PLA Overture White Transmission Distance: 4 PLA Kingroon Black Transmission Distance: 0.4 PLA Overture Red Transmission Distance: 8.2Swap Instructions: Start with Black At layer #14 (1.2mm) swap to Space Gray At layer #18 (1.52mm) swap to White At layer #21 (1.76mm) swap to Black At layer #22 (1.84mm) swap to Red for the rest.Your last slider is set to 2.08mm which is lower than the model height.

Toad from Mario

Mario

Minus97

With most helmet mounts, the helmet only rests on a very small area (ball), which can damage the helmet padding in the long term. That&#39;s why I designed my own holder that solves this problem. You can also hang your jacket/pants and keys on it. Only two M4 or M5 screws are required for assembly. Have fun printing and let me know if I can improve anything!&nbsp;Bei den meisten Helmhalterungen liegt der Helm nur auf einer sehr kleinen Fläche (Kugel) auf, was auf dauer das Helmpolster beschädigen kann. Darum habe ich einen eigenen Halter entworfen, der dieses Problem löst. Außerdem kann man daran seine Jacke/Hose und seinen Schlüssel aufhängen. Zur Montage werden lediglich zwei M4 bzw. M5 Schrauben benötigt. Viel Spaß beim Drucken und lasst mich wissen, wenn ich noch etwas verbessern kann!&nbsp;Difference from the originalI enlarged the helmet pad to protect the helmet padding. The key hanger is also firmly integrated. I also changed the design of the holding arm slightly.Ich habe die Helmauflage vergrößert, um das Helmpolster zu schonen. Außerdem ist der Schlüsselhalter fest integriert. Das Design des Haltearmes habe ich ebenfalls etwas verändert.

Helmet Holder Helmhalter

Helmet Holder

MingGY

Featuring intricately designed articulated joints, this spider model can mimic the movement of a real spider. Each joint is meticulously crafted to allow flexible bending and rotation, bringing the spider to life in your hands.       For the best printing quality, I recommend using a 0.2mm nozzle&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000444141/design/2024-04-26_2cc4b022d7666.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000444141/design/2024-04-26_19e21135eccbc.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000444141/design/2024-04-26_cd22cff008e8e.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000444141/design/2024-04-26_74a81940d15ba.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000444141/design/2024-04-26_dd140ac93d014.jpg"></figure>

spider

Flexi

Tomany

I thought of an opening for the Panda touch wire, nothing complicated, a simple duct to keep the power cable in place and tidy and prevent it from being damaged by rubbing on the sheet metal of the frame. The wire is housed in a curved channel to keep it locked. Fixing to the printer frame is done using two pieces of 17x30mm double-sided tape - 1mm thick. The cover attaches to the base via an interlocking system. I thought of leaving the last 5cm of cable exposed because I chose to use "The ultimate Panda Touch dock V2" support, therefore the cable must be free to move.&nbsp;<blockquote>ATTENTION!!! Choose the version you prefer before launching the print, I have loaded the print profiles for the anonymous version and the version with logo!</blockquote>&nbsp;The support I used to mount the Panda touch can be found at this link:<a target="_blank" href="https://makerworld.com/en/models/178613#profileId-196551" rel="nofollow noopener">Panda Touch Screen Fold Mount v2 by Pretzel 3D - MakerWorld</a>

Panda touch cable cover

Panda Touch

SavageLau

If you want commercial license, check out my bio and get it from Patreon.&nbsp;&nbsp;Hi folks, another simply dragon key chain design.It cost very little filaments (9g) and fast to print (31m).&nbsp;&nbsp;I wanted design something cute, but it end up looks dumb. So let's name it daze dragon.&nbsp;135% Scale one looks sightly better than orginal one. Orginal size looks a bit small.I also made it muti-color one. one single model takes around 4h to print due to the color changing. So why not just have it print 3 at the same, you actuall saving filament and printing times.<h3> </h3><h3>You may like other key chain design: </h3>Silm Dragon Key Chain | KC001<a target="_blank" href="https://makerworld.com/en/models/125069#profileId-135073" rel="nofollow noopener">https://makerworld.com/en/models/125069#profileId-135073</a> <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/421217/2024-01-18_36647baf1c0b5.jpg"></figure>&nbsp;<h3>Design:</h3>I don't know what style that I want this time, so I just randonly do some brush work on cad and try to get the idea.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/421217/2024-01-18_115a299d8e1b9.png"></figure>Get it a bit smooth out.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/421217/2024-01-18_3c6d06c059aac.png"></figure>adding some more detail in there.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/421217/2024-01-18_6ac661a136f17.png"></figure>&nbsp;AND. done.<figure class="image image_resized" style="width:56.11%;"><img src="https://makerworld.bblmw.com/makerworld/draft/421217/2024-01-18_5eef2bd372954.png"></figure>&nbsp;&nbsp;&nbsp;

Daze Dragon Key Chain | KC002

Dragons

BBN GRAFX

Easy to customize. Just edit the text in bambu studio and place how you would like.&nbsp;Check my store for options with more bears soon to come.&nbsp;INSTRUCTIONS TO EDIT TEXT:&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000442166/design/2024-04-25_39fd4d2932b6b.jpg"></figure>STEP ONE: Select the bear you want to edit. Choose objects on the left side of the screen where the red arrow in the picture is pointing.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000442166/design/2024-04-25_b2b8ed5739ea7.jpg"></figure>STEP TWO: On the left hand side the bear you want to edit will be highlighted. Click where is says “text_shape” and it will choose the name. Then you will click on the right upper hand side “Text Shape” icon which looks like “Ta” where the red arrow is pointing in the picture. &nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000442166/design/2024-04-25_3ee92ad105a47.jpg"></figure>STEP THREE: Edit the text in the box shown. You can change the name, size, width, etc&nbsp;&nbsp;

Personalized Interlocking Family Bears Family of 5

Mothers day

3DFashionFreak

Model of the Nike Jordan 4 using Hueforge. I have used geetech silk gold to see the effect but gray would be its original color. Designed to trim the excess black and leave only the central circle. I have used: - 3Dfils red, Jayo Meta black and Jayo Meta white. (Please note: a more intense red would have improved the final finish, Jayo's Meta tend to be more translucent than other brands) -Layer height 0.08. -Initial layer height 0.16. -100% filling

Nike Jordan 4 HUEFORGE

Nike

mikk3l.g

Under desk mount for the Arctis nova pro wireless, charger. Printed in PLA with 3 walls. top and bottom. And 15% infill. Printed upright as shown in the preview, with supports for the overhang.

ARCTIS NOVA PRO WIRELESS. Charger mount

Steelseries

Eleazar 3DinPlastic

Calibration Cube XYZ 20mm&nbsp;<a target="_blank" href="https://makerworld.com/en/models/419413#profileId-322079" rel="nofollow noopener">NEW MODEL AVAILABLE, LAYER HEIGHT CUBES</a><figure class="image"><a href="https://makerworld.com/en/models/419413#profileId-322079" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/830787/2024-04-08_2d663b926bfae.jpg"></a></figure>

XYZ Calibration Cube 

Test Prints

Test

Litolunar

<h3>Description</h3>Print at 100% infill with a layer height of 0.08mm with a base layer of 0.1mm&nbsp;Swap Instructions: Start with Black At layer #7 (0.58mm) swap to Jade White At layer #14 (1.14mm) swap to Black At layer #16 (1.3mm) swap to Red At layer #20 (1.62mm) swap to Jade White for the rest. &nbsp;The framework used can be found here:&nbsp;<a target="_blank" href="https://makerworld.com/en/models/427748#profileId-331694" rel="nofollow noopener">https://makerworld.com/en/models/427748#profileId-331694</a>

Hueforge Rafael (150x150)

HueForge

standitupstore

This piece features the four turtles, Leonardo, Donatello, Michelangelo, and Raphael, as they stand ready for action.&nbsp;scheduled color changes &nbsp;top layers slowed for better quality &nbsp;

TMNT Wall Art 4 pieces

Wall Art

toolmantim313

This is not the entire pastamatic unit. These are just the necessary parts to use 20x20 aluminum extrusions as a base. There is no need to modify and of the original parts. I've also included an bearing upgraded leadscrew. I just didn't understand why this wasn't done in the first place. Everything else has nice bearings.&nbsp;Hardware Needed:18 = M5x10mm socket head cap screws2 = M5 x 12 or 14mm (the 2 screws that screw into the wiper mounts for the 90's)18 = M5 aluminum extrusion nuts2 = 20x20 extrusion pieces cut to 16 ½"2 = Extrusion pieces cut to 10 ¾"&nbsp;It's fairly straight forward. The main side gets one of each Ext Mnts (Pastamatic Ext Mnt 1, 2, & 3). The middle (#3) is the longest one with the 2 different thickness cutouts. Be sure to space the end ones in far enough from the ends to allow clearance for the 90 deg brackets for the extrusions end pieces. Also, now is a good time to place the winder keeper before you set in the pastamatic sides. You will need this since the extrusions raise up the unit and the leadscrew carriage won't hit the bottom and not work properly. You can see it in Pic 2. Once the unit is in place, I used super glue to secure it in place. The wiper mounts can be mounted to the end extrusion and adjusted easily with the extrusion nuts.

Pastamatic Extrusion Mounts and upgraded parts

Respooler

Dynarun

German:&nbsp;Dry Box für Spulen mit einem Durchmesser von 200mm und einer Breite von 65mm.Der Rollenhalter passt in die verlinkten 4L Dosen von Amazon.Er ist komplett neu konstruiert, ich habe mich an unterschiedlichen Designs orientiert.&nbsp;Rollenhalter + Rollen: Diese Teile können ohne Korrekturen gedruckt werden, die Lagersitze haben 0,2mm Spiel.&nbsp;Filamentdurchführung M14x1,5-G1/8: Mutter M14x1,5 +0,15mm Loch-KompensationSchraube mit G1/8 +0,05mm Loch-Kompensation&nbsp;&nbsp;English:&nbsp;Dry box for spools with a diameter of 200mm and a width of 65mm.The roll holder fits into the linked 4L cans from Amazon.It is completely redesigned, I based it on different designs.&nbsp;Roll holder + wheels:These parts can be printed without corrections, the bearing seats have 0.2mm play.&nbsp;Filament feedthrough M14x1.5-G1/8:Nut M14x1.5 +0.15mm hole compensationScrew with G1/8 +0.05mm hole compensation&nbsp;Box / Behälter 4L: <a target="_blank" href="https://www.amazon.de/dp/B08CKB2B12?ref=ppx_yo2ov_dt_b_product_details&th=1" rel="nofollow noopener">https://www.amazon.de/dp/B08CKB2B12?ref=ppx_yo2ov_dt_b_product_details&th=1</a>Bearings / Kugellager 608ZZ: <a target="_blank" href="https://www.amazon.de/dp/B08JLXN2BN?psc=1&ref=ppx_yo2ov_dt_b_product_details" rel="nofollow noopener">https://www.amazon.de/dp/B08JLXN2BN?psc=1&ref=ppx_yo2ov_dt_b_product_details</a>Fittings PC4-M10 (G1/8): <a target="_blank" href="https://www.amazon.de/dp/B07SKX5P9P?ref=ppx_yo2ov_dt_b_product_details&th=1" rel="nofollow noopener">https://www.amazon.de/dp/B07SKX5P9P?ref=ppx_yo2ov_dt_b_product_details&th=1</a>

Dyna Dry Box / Filament Box 4L 

Cardboard Spool Adapter

MiMa3D

Please enjoy a delightful combination of nature-inspired artistry and 3D printing innovation: a bouquet of tulips gracefully nestled within a 3D-printed vase.&nbsp;Designed for simplicity and ease of assembly, the tulip flowers and stems have been sliced separately, eliminating the need for multi-printing and ensuring faster print times. This also adds an element of fun, allowing you to mix and match colors to your heart&#39;s content.&nbsp;The vase is optimized for lightweight construction and quick printing, however, please note that it&#39;s not intended to hold liquids, so refrain from filling it with water. Filling the vase with old purge poop is a great way to use up print waste and help hold up the stems and leaves.&nbsp;Each stem is straight with a flat D section, enhancing print quality without compromising the bouquet&#39;s visual appeal, as most of the stems remain hidden beneath the flowers and leaves.&nbsp;If you&#39;re interested in expanding your bouquet with additional flower varieties, feel free to leave your suggestions in the comments section.&nbsp;Enjoy the creative process and have fun assembling your personalized bouquet of 3D-printed tulips.

Bouquet Of Tulips

Flowers

HardPrint

<div><h1>Summary</h1><div>HardPrint co. best-selling Baby T-rex Flexy Keychain has been released! The design is super cute, print in one piece, without support and easy to print. In order to make it easy for everyone to print, we modified many model details. In addition to strengthening the joint strength, the overall model design is also enlarged so that the first layer can be easily printed.Download and print your own Baby T-rex now!This file is not for commercial use. If you need commercial use, please contact us for license.硬印團隊熱銷已久的小暴龍鑰匙圈公檔案啦！ 造型超級可愛，雙向一體成型關節設計，0支撐，輕鬆列印。 為了讓每個人都可以簡單列印，我們修改了許多模型細節， 除了加強關節強度，也放大整體模型設計，讓第一層可以輕鬆列印。 馬上下載列印屬於你自己的小暴龍吧！此檔案不可商業使用，若需商業使用，請聯繫我們詳談授權合作。</div><h1>Print Settings</h1>Printer Brand: <div>Prusa</div> <pre><code> Printer: <div>i3 MK3</div></code></pre> Rafts: <div>No</div> <pre><code> Supports: <div>No</div></code></pre> Resolution: <div>0.2mm</div> <pre><code> Infill: <div>15%</div></code></pre><h1>Post-Printing</h1><img src="https://makerworld.bblmw.com/makerworld/draft/724424/2024-03-18_s47iy6zcym5p.jpg" alt="image"><pre><code> <img src="https://makerworld.bblmw.com/makerworld/draft/724424/2024-03-18_6otuqitchetx.jpg"> <img src="https://makerworld.bblmw.com/makerworld/draft/724424/2024-03-18_lk11u0iajgz7.jpg"></code></pre></div>

Baby T-rex Flexy Keychain

T-Rex

feiliewu

在ams里面线和接口接触面滑动的更顺畅，使耗材线不容易陷落到线盘线夹住，不知道我表达的清楚没有。英文注释：my English is no bad.but,this is joke.I don't know how 介绍 this dongdong， thanks.

AMS saver sub 滑动轴承接头东东 接头

PrettyPrettyPrintPress

This design is intended to be used as a reference for filament color options available to your customers. Our interlocking grid allows you to connect as many “Docks” as you would like to your “Marina” so that you may showcase your Benchy's in fashion! Each “Dock” is approximately 60mm x 60mm and has an indent in the center allowing you to glue a magnet. The Benchy STL file attached is edited from <a target="_blank" href="https://www.3dbenchy.com/" rel="nofollow noopener">https://www.3dbenchy.com/</a> (All credits go to 3dbenchy) to allow the same size magnet be glued to the Benchy also! This interlocking “Marina” can truly showcase to your customers all the color your store has to offer! Full plates of 24 colors or more can be assembled, clicked, and carried together! And, the detachable Benchy's allow customers to look at the color up close, while still being easy for you to maintain and organize a system. The recommended magnet size is 10mm x 2mm that can be found it your local Amazon. Personally we leave our "Marina's" separated into different categories making it easy on the customer to identify the perhaps subtle but still very different options available. Ex_ solid basic color's, solid glitter/sparkle, gradient, split-colors, etc.

Benchy "Marina Display" for Filament Examples

benchy

davidkelly021

print in place dragon with wings &nbsp;

flexi winged dragon 

jlbsck

Hexagonal stand for playstation 5 controllers.

Hexagonal Playstation 5 Controller Stand

Creativity Lab

The popular Razer logo, attached to your key.It's a keychain!

Razer Keychain - 2 Colors

Razer

Xeraj

<ul><li>LED strip holder 200mm long with grip ends. </li><li>Recommendation for printing with a height of 0.2 mm.</li><li>Designed for 10mm LED strip width.</li></ul>

LED strip holder for 10mm LED strip

Govee

Maoirae

Due to hotend design there is problem, that hotend fan is taking air to cool down from bad places where is hot air, like bellow from around heatblok and heatbed and that can lead to melt filament too soon before heatblok and cause clog. So to prevent this heat creep I designed a little fan duct to prevent that. Its made to take air directly from the side of hotend housing. Its made simply to just screw directly to part cooling fan, than you can assemble front hotend housing as normal. Hope it will help you.&nbsp;Print from PETG or ABS for better heat resistance.&nbsp;There is also model for X1C/X1 in my published models: <a target="_blank" href="https://makerworld.com/de/models/98684#profileId-105217" rel="nofollow noopener">https://makerworld.com/de/models/98684#profileId-105217</a>

Hotend fan duct P1P/P1S

Bambu Labs P1S Hotend

K2_Kevin

<h2>Bambu Tool Holder (3 Versions Available - Gridfinity Compatible)</h2>Don&#39;t forget to Follow! Thank you so much for your Downloads, Like and BOOSTS!<h3>Versions Available:</h3><ul><li>Version #1 - <ul><li>6 Piece Tool Set</li><li>Lube Tool(s) Holder</li><li>2 extra scoop bins</li></ul></li><li>Version #2<ul><li>6 Piece Tool Set</li><li>Scraper Holder</li><li>2 extra scoop bins</li></ul></li><li>Version #3<ul><li>6 Piece Tool Set</li><li>3 extra scoop bins</li></ul></li></ul><h3>Holds Tools:</h3><ul><li>6 Piece Tool Set - Choose Below</li><li>2x Lube Tools - <a target="_blank" href="https://makerworld.com/en/models/472091#profileId-381848" rel="nofollow noopener">https://makerworld.com/en/models/472091#profileId-381848</a></li><li>2x Hex Scrapers - <a target="_blank" href="https://makerworld.com/en/models/71757#profileId-75921" rel="nofollow noopener">https://makerworld.com/en/models/71757#profileId-75921</a></li><li>Gridfinity Compatible</li></ul>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/478965#profileId-390252" rel="nofollow noopener">https://makerworld.com/en/models/478965#profileId-390252</a><a target="_blank" href="https://makerworld.com/en/models/478965#profileId-390252" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000105024/design/2024-05-30_8967eae47f71.png"></a><a target="_blank" href="https://makerworld.com/en/models/14462#profileId-37136" rel="nofollow noopener">https://makerworld.com/en/models/14462#profileId-37136</a><a target="_blank" href="https://makerworld.com/en/models/14462#profileId-37136" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000105024/design/2024-05-30_6579a2464af32.png"></a><a target="_blank" href="https://makerworld.com/en/models/472091#profileId-381848" rel="nofollow noopener">https://makerworld.com/en/models/472091#profileId-381848</a><a target="_blank" href="https://makerworld.com/en/models/472091#profileId-381848" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000105024/design/2024-05-31_7f556b41a717f.png"></a>&nbsp;&nbsp;&nbsp;

Bambu Tool Set Holder - 3 Versions - Gridfinity

BaBo

GreedyGoblin

air jordan keychain&nbsp;NEW TRAVIS SCOTT VERSION AVAILABLE: <a target="_blank" href="https://makerworld.com/en/models/471909#profileId-381630" rel="nofollow noopener">https://makerworld.com/en/models/471909#profileId-381630</a>&nbsp;THANKS FOR ALL THE SUPPORT!

Air jordan keychain

Keychains

3D-Print-Bunker

Deutsch:Habe einen Halter für die Bambu Lab Tür gemacht. Dort passt super die Blink Mini Kamera rein. Die Halterung klebt ihr genau in die Ecke oben links rein (bis zur schwarzen Türumrandung) Dann sitzt die Kamera perfekt und die Tür geht komplett auf.&nbsp;Englisch:Made a holder for the Bambu Lab door. The Blink Mini camera fits in there perfectly. Stick the holder exactly in the top left corner (up to the black door border). Then the camera sits perfectly and the door opens completely.

Holder Bambu Lab door Blink Mini

Blink Camera Mount

123cut

Introducing the latest clip, and I believe this is the definitive one. Numerous tests have been conducted to reach this point. It is ultra-thin and incredibly easy to use; nothing else compares to it in terms of user-friendliness and practicality. I highly recommend trying one. It can be left permanently on the spool without causing any issues, even in the AMS. Please note that this new clip is only compatible with the original bamboo spools. The present logo is property of Bambu and is exclusively used to indicate product compatibility with Bambu coils, but it is not a Bambu product.

Filament Clip for Bambu spools

Spool Clips

Mdesign

Just cut the correct length of PTFE tube to renew nozzle wiper. Enjoy it :)

Swatches

HSW

Build Plate Holder

Filament Holders

Skulls

magnets

Marvel Puzzle

Mario

Helmet Holder

Flexi

Panda Touch

Dragons

Mothers day

Nike

Steelseries

Test Prints

Test

HueForge

Wall Art

Respooler

Cardboard Spool Adapter

Flowers

T-Rex

AMS

benchy

Dragons

PS5

Razer

Govee

Bambu Labs P1S Hotend

BaBo

Keychains

Blink Camera Mount

Spool Clips

Bambu Labs P1S