ImperiousFox

LoboCNC

This is a spiky version of my <a href="https://www.printables.com/prints/253614-fast-print-hexmaille-fabric" rel="nofollow">Fast Print Hexmaille Fabric</a>, for a little more aggressive look!This was originally inspired by <a href="https://www.thingiverse.com/thing:3095799" rel="nofollow">TurboDork's NASA Fabric</a>, which used identical interlocking pieces. This design, however, uses hexagonal tiles and separate interlocking rings. The rings are printed right on top of the tiles - kind of like removable supports. They have minimal contact with the surface below, so they are very easy to break free. I've included an 8x10 grid of tiles as well as a single tile and ring for inspection.Printing The layer height needs to be exactly 0.2mm for the clearances to work out correctly. If using PrusaSlicer, you should set the line width for perimeters to 0.45mm for most efficient printing. I used PLA with the 0.2mm layer thickness “speed” profile, but I was able to bump up the all the perimeter speeds 60mm/s. Post Printing After printing, the rings are still attached to the lower surface of the tiles, but only minimally so. By giving the fabrics a good wiggle, you should be able to break all the rings free.

Spiky HexMaille Fabric

CosPlanning

miniShev

Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: <a target="_blank" href="https://www.patreon.com/minishev" rel="nofollow noopener">https://www.patreon.com/minishev</a>Patrons have access to all my files in one place, supported miniatures, a request board, as well as commercial options! Come check it out :-)

Low poly Otters

Just for Fun

jaayjeee

Edit: I&#39;ve also released a Stamina Vessel Watering Can to go with this <a target="_blank" href="https://makerworld.com/en/models/461382#profileId-370093" rel="nofollow noopener">Here</a> Hello everyone!&nbsp;One of my earliest designs was the <a target="_blank" href="https://makerworld.com/en/models/24681#profileId-21731" rel="nofollow noopener">Modular Sheikah Tower from Zelda BotW</a> and i was pretty happy with it, as were others!&nbsp;Initially, it was meant to be either a Floor Standing Lamp, or a Plant Stand with Plants on each of the Platforms, and after redesigning 99% of the parts from scratch, I&#39;ve now completed one of those options, as well as made way for the Floor Lamp in the near future!&nbsp;This is the Modular Sheikah Tower Planter, and while it&#39;s a fair bit of printing, for me it was well worth it!&nbsp;The one in the pictures stands exactly 1 Metre Tall and has 6 Perch Planters, The outside of the top platform can also house 6 more small flowers or succulents if you desire it!&nbsp;Assembly is fairly straight forward, and i&#39;ve included a quick video run through below. Additionally, each Plate in the Bambu Studio Profile is named and has how many times that piece should be printed.&nbsp;This Entire Tower was printed on an A1 Mini, You could definitely get more done at once on a larger build plate but it&#39;s not needed.&nbsp;If your Filament isn&#39;t completely dry, the grate pattern will lead to a lot of stringing, nothing that a heat gun or lighter can&#39;t fix though. Please don&#39;t downrate my profile due to your filament not being completely dry!&nbsp;For a basic tower you need the following:<ul><li>1x Teardrop</li><li>3x Arms</li><li>1x Disc</li><li>1x Tub</li><li>6x Platforms</li><li>6x Ring</li><li>1x Grate SideThing</li><li>3x SideThing</li><li>1x Base Hex Tray</li><li>2x Grate (These two are important, 1 at the top and bottom, any perches in your pillar should be between these)</li><li>And for each plant you will need<ul><li>1x Grate Perch</li><li>1x Perch</li></ul></li><li>Just to reiterate, you can not have a Drawer Perch at the very bottom or top of your pillar, the perches will interfere with either the base, or the SideThings.</li></ul>Enjoy!&nbsp;<figure class="image image_resized" style="width: 74.22%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000441788/design/2024-04-24_2b5f28bb4666.gif"></figure>&nbsp;<figure class="media"></figure>&nbsp; All of my projects are 100% Free. However if you&#39;d like to support me, feel free to buy me a coffee<a target="_blank" href="https://www.buymeacoffee.com/jaayjeee" rel="nofollow noopener">Buy Me A Coffee</a>

Sheikah Tower Planter from Zelda BotW

Neat and Clean

Adamslab

An updated version of my last knitting needle holder.I&#39;ve adjusted the design so that it prints great without any supports. Make sure that the holes face down on the bed, for best results.I added a small angled pocket on one side to hold darning needles or small accessories.It makes a great gift for friends or family that like to knit/crochet.&nbsp;<h3>Print Settings</h3>Printer Brand:PrusaPrinter:Prusa Mk2Rafts:NoSupports:NoResolution:200 MicronsInfill:20%Notes:I printed this at 0.2mm using wood filament.I did a quick filament change to natural PLA to achieve the white stripe.&nbsp;&nbsp;&nbsp;Category: Organization

Knitting Needle & Crochet Hook Holder V2

For the Craft

3D Art

Schöner Auffangbehälter für Filament abfällepassen zum Riser Superstructure. <a target="_blank" href="https://makerworld.com/en/models/201705?from=search#profileId-222087" rel="nofollow noopener">https://makerworld.com/en/models/201705?from=search#profileId-222087</a>&nbsp;Viel Spaß damit :)

CosPlanning

Just for Fun

Neat and Clean

For the Craft

QOL