神楽千雪

Willi 3D

Create your BaBo organizer! A system created to store them all!&nbsp;Description:This is the BaBo drawer module 30. The drawer module is the heart of the system as it carries the inserts and is therefore the main page of the system.&nbsp;The usable dimensions of the drawer are 240x210x30. The drawer has space for 8x7 inserts. The inserts have a grid of 30x30mm, this means a 1x2 insert has the dimensions 30x60mm.&nbsp;BaBo organizer is a stationary, very flexible system to store your tools, spare parts and even printing plates. The design is based on the iconic look of the Bambu Lab X1 printer.&nbsp;It was important to me that even newbies could print and use the system, which is why all parts are printed without support and the parts are already pre-sliced.&nbsp;Furthermore, all inserts for the accessories and tools that the printer comes with are free. Only the special modules and inserts are only accessible to members of my club. The purpose of the club is to promote my work and to reduce the costs that I incur. I would also like to find people who are interested in expanding this system.&nbsp;The entire system uses only 1 type of screw, M3x8 countersunk screws.Links:<ul><li><a target="_blank" href="https://makerworld.com/de/u/24485025/collections/12914" rel="nofollow noopener">BaBo collection</a></li><li><a target="_blank" href="https://makerworld.com/en/u/24485025/collections/666853" rel="nofollow noopener">BaBo duo collection</a></li><li><a target="_blank" href="https://makerworld.com/en/u/24485025/collections/666866" rel="nofollow noopener">BaBo inserts</a></li><li><a target="_blank" href="https://www.printables.com/@Willi/store" rel="nofollow noopener">Exclusive models, printables. (Credit card)</a></li><li><a target="_blank" href="https://than.gs/u/1578655?plans=true" rel="nofollow noopener">Exclusive models, thangs. (Paypal, Credit card)</a></li></ul>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000014125/design/2023-09-20_95fdae0c8d181.jpg"></figure>Update:(13/09/23)<ul><li>Assembly optimizations</li></ul>(31/10/23)<ul><li>improved connection between modules</li><li>easier to push back the drawer</li><li>print profile optimizations</li></ul>(26/01/24)<ul><li>design optimizations to prevent warping</li></ul>&nbsp;Printing:Layer height: 0.2Supports: NoBrim: NoMaterial: all&nbsp;Assembly:Follow the instructions in the picture.<ul><li>printed parts</li><li>16 x M3x8 countersunk screws.</li></ul>If you like this model, please throw me a like. Designing the models is time, filament and coffee consuming. <a target="_blank" href="https://www.paypal.com/donate/?hosted_button_id=WGL5LXN5EHEXN" rel="nofollow noopener">If you want to support my work buy me a coffee (PayPal).</a> Thanks!&nbsp;Clubcontent:<figure class="image"><a href="https://www.printables.com/@Willi/store" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000014125/design/2024-06-13_ccadb89c071b7.jpg"></a></figure><figure class="image"><a href="https://www.printables.com/@Willi/store" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000014125/design/2024-06-13_c05e6d1cbb9c7.jpg"></a></figure>

[BaBo] organizer drawer module 30

BaBo

瘋子般の小白

根据T站最简易的皮筋小手枪重新建模，加了一些装饰件文件不包含瞄准器<figure class="media"><oembed url="https://www.bilibili.com/video/BV1Cb4y1V7Vg/?spm_id_from=333.999.0.0&amp;vd_source=406f27a8625ccc51a6a2aa4eb92a5459"></oembed></figure>

皮筋小手枪

agepbiz

The Pocket Copter is easy and fast to print and assemble and flies great! Requires no extra hardware or glue and prints without support structures&nbsp;update10.07.23I have fixed some mesh issues on the large blade. I recommend that you redownload the blade&nbsp;<figure class="media"><div data-oembed-url="https://www.youtube.com/shorts/HZ3v7kSPpac"><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=HZ3v7kSPpac"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://www.youtube.com/embed/HZ3v7kSPpac" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>&nbsp;&nbsp;Printsettings: No raft No Support Structures 0,15mm layer heightWARNING: CHOKING HAZARD - Small parts Not for children under 3 yrs.

Pocket Copter

玩具

Nils Kal

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/377912/2023-08-24_d8isth83q5cb.png" alt="NK"></figure><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/377912/2023-08-24_jeh5ijkl8akh.png" alt="banner"></figure> I'm currently playing death stranding on my PC and came up with the idea of recreating the „Odradek“ scanner as a desk light so I'd like to present you the "Desk Stranding" lamp (thanks to reddit user u/Typh_R who came up with the name). This is one of my biggest projects so far with a total of 37 parts needed (30 individual parts). I only used screenshots to recreate the original look as close as possible with keeping the printability in mind. I ended up with 4 different .3mf's, divided into their color style. All parts won't require any supports and you also won't need an MMU for this project, all color changes are layer based. There is a bit of assembly required, you'll find everything that's needed below!You can also use this as a cosplay prop if you are using batteries or a powerbank as the power source, there is still some space inside the main body for small power sources. All parts are labeled with a version number so you can easily detect any future changes! <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/377912/2023-08-24_rb1gk5guxth2.png" alt="Manual"></figure> &nbsp;Note: Two lights are flipped in some pictures, the final version has got the correct original look!<h3> </h3>&nbsp; Features:<ul><li>Fully FDM compatible with no supports needed</li><li>On/off switch</li><li>Invisible wiring (wire channels through the hinges)</li><li>All lights are fully adjustable</li></ul> Hardware needed:<ul><li>0.25mm² wires (About 2 meters red and black)</li><li>Switch (21x15mm [punch hole is 13x20], standard size, like <a target="_blank" href="https://www.aliexpress.com/item/32921026422.html?spm=a2g0o.productlist.0.0.1c5313ce9bHl4M&algo_pvid=6a672913-6609-4980-9225-2778fcda0396&algo_expid=6a672913-6609-4980-9225-2778fcda0396-35&btsid=f061563d-0e5d-4e64-9179-2874cbf4c177&ws_ab_test=searchweb0_0,searchweb201602_6,searchweb201603_55" rel="nofollow noopener">this</a>)</li><li>Soldering tools</li><li>LED Strips</li><li>1x LED Diode Blue</li><li>Power Source</li><li>10x M3x4 Screw</li><li>15x M3x12 Screw</li><li>5x M3x20 Screw</li><li>21x M3 Nut</li><li>5x M4x20 Screw</li><li>5x M4 Nut</li></ul> Installation guide: <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/377912/2023-08-24_1zgcvcaj35py.jpg" alt="Qries"></figure>Click <a target="_blank" href="https://drive.google.com/file/d/1xE0kxJmfiwEKIVhW-_Ozk4rUgfkIppxT/view?usp=sharing" rel="nofollow noopener">here</a> for a detailed instruction manual (pdf file). This design is still subject to change so check back again for updates (I already made some changes after taking the pictures so they might differ from the printed version).Have fun with the lamp! As bonus, here is a little stop motion animation from the lamp in action:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/377912/2023-08-24_sl2qsjg41wfo.gif" alt="Buddy"></figure> +++++++++++++++++++++++++++++++++++++++++++++++++ &nbsp;If you like this file or need some adjustments feel free to leave a comment. A rating or tip is also welcome and may check out my other designs! Happy printing!&nbsp; <figure class="image image_resized" style="width:7.73%;"><img src="https://makerworld.bblmw.com/makerworld/draft/377912/2023-08-24_y0rwyb5nz7o3.png" alt="NK"></figure><h3>Print instructions</h3><ul><li>All parts are optimized for FDM printing.</li><li>Please use a 0.4mm nozzle (or smaller).</li><li>I advise to use the .3mf (or gcode) files, as all parts are already aligned and ready to print. However, I’ve provided all .stl files as well!</li><li>Print in PETG for better durability</li></ul>&nbsp;&nbsp;This work is licensed under the 'Creative Commons NonCommercial' license. Please do not sell any physical or digital copies of it.

Desk Stranding - The Death Stranding Desk Lamp

Kocyns

<h3>UPDATE:</h3><ul><li>If you want permission for commercial use: <a target="_blank" href="https://www.patreon.com/kocy/" rel="nofollow noopener">patreon.com/Kocy</a></li><li>New model: <a target="_blank" href="https://makerworld.com/en/models/376939#profileId-276893" rel="nofollow noopener">DeLorean DMC-12</a></li></ul><figure class="image image_resized" style="width: 58.79%"><a href="https://makerworld.com/en/models/376939#profileId-281288" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218462/design/2024-03-27_a41aa99062719.png"></a></figure>&nbsp;<ul><li>Added multi color version for AMS: AMS - 4 colors - FRAME or (AMS - 4 colors - NO FRAME)</li></ul><figure class="image image_resized" style="width: 60.36%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218462/design/2024-03-08_171076b91749a.jpg"></figure><h3>ASSEMBLY:</h3>The assembly itself is more demanding, so please be patient during the process. Thank you!&nbsp;Quick assembly tip: Start from the front of the vehicle along with both side parts, then move over the hood to the roof. Then begin assembling the internal parts followed by the trunk. Mount the pre-assembled chassis with wheels last. Bumpers and spoiler go on at the very end.&nbsp;<h4>Video:</h4><figure class="media"></figure><figure class="image image_resized" style="width: 80.08%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218462/design/2024-03-02_6a7929db2a272.png"></figure><figure class="image image_resized" style="width: 63.59%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218462/design/2024-03-02_eada19129df21.png"></figure><h4>1) Sides and front</h4><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218462/design/2024-03-05_b8c462015b82b.png"></figure><h4>2) Hood and roof</h4><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218462/design/2024-03-05_2b1f6be2a6a21.png"></figure><h4>3) Interior parts 1/3</h4><figure class="image image_resized" style="width: 57.21%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218462/design/2024-03-05_91d61eb454038.png"></figure><h4>4) Interior parts 2/3</h4><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218462/design/2024-03-05_bf666331b1267.png"></figure><h4>5) Interior parts 3/3</h4><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218462/design/2024-03-05_a8c15ef4c451d.png"></figure><h4>6) Chassis and wheels</h4><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218462/design/2024-03-05_9b011d38aa839.png"></figure><h4>7) Assembly</h4><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218462/design/2024-03-05_772225c948dfc.png"></figure><h4>8) Bumpers</h4><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218462/design/2024-03-05_70518fc3c497b.png"></figure>&nbsp;<h4> </h4><h4>Wheel (version R1 only):</h4><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218462/design/2024-03-03_35304525e8cc.png"></figure><figure class="image image_resized" style="width: 61%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218462/design/2024-03-03_9e476fad10ef9.webp"></figure>&nbsp;…More Information will be added!

Golf MK1 - Kit Card

白袛工坊_v

眼睛可以分开打印，但是我没有测试过眼睛单独打印，可以做适当缩小

（幻兽帕鲁）100%还原捣蛋猫 全分件

幻兽帕鲁

Freer

👍👍Please 🚀Boost this model if you like it, it really helps!👍👍&nbsp;Fits Brio train tracks, and most other wooden systems. LILLABO fits most tracks, but some are a little tight.&nbsp;Great test of bridging on a 3d printer&nbsp;I edited the print profile to also be more compatible with Bambu printers.&nbsp;I made sure this fully complies with the license on Printables site. I also Mirrored the license here to protect Prusa and Makerworld.

Wooden Train Bridge Support (Stackable)

宜家小火车

DANY112SVK

Printed from PLA on a Bambulab X1C printer. I recommend printing 0.2 layer. All supports&nbsp;EDIT: Added 1.2mm chamfer on the switch for better integration into the main part. Also, without chamfer, it sometimes caused the handle of the second part to break.

Rail switch compatible with "brick DUPLO"

乐高小火车

GyuLee

toy train~ enjoy~need a maget 4X4X10&nbsp;Add..We will add a train of 6x3 circular magnets by collecting opinions that square magnets are difficult to obtain. Currently, we are not able to add the 3mf using the beta version, so we will add the stl file first. I hope you enjoy printing it.<h2> </h2>

Toy Train (Need a magnet)

小火车

lloydliu

我为不同品牌的耗材料盘设计了这款料盘干燥盒，该料盘干燥盒带有四片翅片，通过四组可压缩的弹片与本体相连，将干燥盒塞入料盘中心孔时，弹片的弹力将翅片向外撑开，使其紧紧贴在料盘中心孔内壁上保持可靠固定，弹片的伸缩特性使得该料盘干燥盒得以适配市面上绝大多数拥有不同孔径的料盘，干燥盒的本体壳分为上下两半，通过两条轨道相互扣合，其中一侧本体壳的底面设有一体打印的盒盖，通过文件附带的小漏斗，可以向干燥盒内加注常见的球形硅胶干燥剂。该料盘干燥盒两端带有开槽的轴杆，可安装标准608轴承，与我先前发布的分离式手柄米桶料盘架适配，也与大多数使用608轴承的料盘架相匹配。如果您准备将该干燥盒用于AMS内时，请在切片软件中利用添加负对象功能将两端轴杆切除，以缩减宽度。&nbsp;*2024.03.09更新：新增AMS版本，切除两端轴杆，翅片带有AMS标识，和普通版分别摆放于漏斗两侧，您可根据自己需要在打印前删掉不需要的部分&nbsp;&nbsp;I designed this spool drybox for different brands of filament spools, the spool drybox has four pieces of wings, connected to the main body through four groups of compressible shrapnel, when the drybox is stuffed into the center hole of a spool, the elastic force of the shrapnel will push the wings outward, so that them are tightly attached to the inner wall of the center hole of the spool to maintain reliable fixation, the telescopic characteristics of the shrapnel make the spool drybox adapt to the vast majority of spools with different apertures on the market, the main body of the drybox are divided into two shells, and are interlocked with each other through two tracks, and the bottom surface of one side of the center-shell is provided with a cap which printed in one piece, through the small funnel attached to the file, the drybox can be filled with common spherical silicone gel desiccant.This spool drybox has slotted shafts at both ends to fit standard 608 bearings, which is compatible with spool shelf for 5.8L Drybox I posted earlier, and also with most spool shelfs that use 608 bearings. If you are going to use this drybox in AMS, use the Add Negative Object function in the slicing software to cut off the shaft rods at both ends to reduce the width.&nbsp;*2024.03.09 update:The new AMS version has been added, with the slotted shafts at both ends removed, and the wings are marked with AMS logos, the regular version is placed on both sides of the funnel, so you can delete the unwanted parts before printing according to your needs.

料盘轴干燥盒Spool drybox

工具

Spike_Mix

<h3><a target="_blank" href="https://makerworld.com/en/models/197382" rel="nofollow noopener">V2 WITH REINFORCED PINS AND NO CAPS HERE</a></h3>&nbsp;If you want a model without the keyring hoop you can check out <a target="_blank" href="https://makerworld.com/en/models/183910" rel="nofollow noopener">this remix</a> I made.&nbsp;Assembly instructions:&nbsp;Print the base, gears and 2 caps and assemble. You may need to glue the caps to the base&#39;s gear axis.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000180647/design/2024-02-11_644ea13d600ae.png"></figure>&nbsp;To legally sell PRINTED models, you may obtain my permission through this link:<a target="_blank" href="https://www.patreon.com/SpikeMix3D" rel="nofollow noopener">https://www.patreon.com/SpikeMix3D</a>

Gear heart fidget toy keychain

摆件

3D Print Masters Hub

Storage Bin Set with BasketAdded LIDs, small, medium large-Choose bin size small, medium, large and arrange basket to your liking.-Great for organizing misc hardware parts, batteries, screws, clips and more!-Easy print.-Scale down as needed.-Please like and subscribe! More to come!-See bio for more exclusive print project ideas.🔥🔥 Check out my PRO MODELS HERE! <a target="_blank" href="https://cults3d.com/en/users/FabulousFilaments/3d-models" rel="nofollow noopener">https://cults3d.com/en/users/FabulousFilaments/3d-models</a> 🔥🔥

Storage Bin Set with Basket

盒子

Clay2F

<h3>EN:</h3>Since I wanted to construct various holders and test them before printing, I created the hole pattern of the Skadis walls from Ikea as a step file.&nbsp;<h3>DE:</h3>Da ich mir diverse Halter konstruieren und vor dem Druck prüfen wollte, habe ich mal das Lochraster der Skadis Wände von Ikea als Stepdatei erstellt.&nbsp;

IKEA Skadis

ikea

Jory

专门为lucky13系列玩具设计的大剑，，它可以完美适配lucky13的标准持握手，非常易于打印和使用。使用它来丰富你lucky13的姿态和武器库！A large sword specially designed for the Lucky13 series toys, it can perfectly fit the standard grip of Lucky13 and is very easy to print and use. Use it to enrich your Lucky13 posture and arsenal!&nbsp;关注我，我会持续更新创作lucky13的系列装备 以下是其他专门为lucky13设计的武器： Follow me, I will continue to update and create the series of equipment for Lucky13 The following are other weapons specifically designed for Lucky13: 【三叉戟/Trident】<a target="_blank" href="https://makerworld.com/zh/models/242239#profileId-258208" rel="nofollow noopener">https://makerworld.com/zh/models/242239#profileId-258208</a> 【长刀/Blade】<a target="_blank" href="https://makerworld.com/zh/models/218626#profileId-237487" rel="nofollow noopener">https://makerworld.com/zh/models/218626#profileId-237487</a> 【长矛/Spear】<a target="_blank" href="https://makerworld.com/zh/models/218605#profileId-237469" rel="nofollow noopener">https://makerworld.com/zh/models/218605#profileId-237469</a> 【自定义标牌/Custom Tag】<a target="_blank" href="https://makerworld.com/zh/models/225251#profileId-243148" rel="nofollow noopener">https://makerworld.com/zh/models/225251#profileId-243148</a>【能量剑/Energy Sword】<a target="_blank" href="https://makerworld.com/zh/models/251526#profileId-267924" rel="nofollow noopener">【HALO】Energy Sword for dummy13 来自 Jory - MakerWorld</a>【武士刀/Katana】<a target="_blank" href="https://makerworld.com/zh/models/372407#profileId-272343" rel="nofollow noopener">Katana for Lucky13 来自 Jory - MakerWorld</a>【雷神之锤/Thor&#39;s Hammer】<a target="_blank" href="https://makerworld.com/zh/models/372428#profileId-272375" rel="nofollow noopener">Thor&#39;s Hammer for Lucky13 来自 Jory - MakerWorld</a>【火箭发射器/Rocket Luancher】<a target="_blank" href="https://makerworld.com/zh/models/410891#profileId-312830" rel="nofollow noopener">Rocket Launcher for Lucky13 来自 Jory - MakerWorld</a>

BaBo

gun

玩具

灯

车

幻兽帕鲁

宜家小火车

乐高小火车

小火车

工具

摆件

盒子

ikea

lucky 13