Ilkka

Hugo

<h2>Update : I added the money clip There is now a version with and without money clip in the back.</h2>&nbsp;This is the second version of my cascade card wallet, featuring a similar appearance but thoroughly revamped.<h4>Filaments used in the pictures : <a target="_blank" href="https://formfutura.com/?aff=7" rel="nofollow noopener">Li</a><a target="_blank" href="https://formfutura.com/product/refill-petg/?aff=7" rel="nofollow noopener">nk</a></h4><ul><li>FormFutura Refill PETG Light Grey</li><li>FormFutura Refill PETG Iron Grey</li></ul>Here are the key updates:<ol><li>The new version can accommodate 6 cards, compared to 5 in the previous iteration.</li><li>The popup mechanism is now easier to detach from the printer, eliminating the need for holes in the back to crack open the mechanism.</li><li>The retention mechanism has been entirely redesigned to secure cards from the top rather than the side. This ensures more secure card placement, and the wallet is compatible with any number of cards, up to 6.</li></ol>This model still demands a highly precise printer, as the internal mechanism is separated from the wall by a mere 0.2 mm.I have not yet designed a money clip for the back, but it will be included in a future update.<h3>Printing :</h3><ul><li>Nozzle size : 0.4 mm</li><li>Layer height : 0.2 mm</li><li>PLA and PETG both work</li><li>No support needed</li><li>The STL is already oriented, the model is printed upright</li></ul><h3>Freeing the mechanism :</h3>Force on the slider to crack it open :<figure class="image image_resized" style="width:50%;"><img src="https://media.printables.com/media/prints/798465/rich_content/eeee7a40-93e7-4a98-a4dd-e0b83a3a72ca/20240310_165015.jpg#%7B%22uuid%22%3A%226fac39e0-5c87-4b27-a4d5-f723c113ad5e%22%2C%22w%22%3A3024%2C%22h%22%3A4032%7D"></figure>If it is not enough, you can push the pivot on the back :<figure class="image image_resized" style="width:50%;"><img src="https://media.printables.com/media/prints/798465/rich_content/ebdb1922-7c49-48e6-b2dc-037afe421c6a/20240310_165005.jpg#%7B%22uuid%22%3A%225b8ad44e-f5c1-49dc-be6b-8d84b6ee539c%22%2C%22w%22%3A3024%2C%22h%22%3A4032%7D"></figure>Enjoy :)

Cascade card wallet V2

Other stuff

LinkDesigns

This is a stackable shelf system designed to be easily printable, robust, and filament efficient. Stack your shelves vertically or horizontally and free up space on your desk! The design prints without support and is easily assembled with no glue or screws. There are two trays available: A standard tray for the “floor” of each shelf, and a top tray that blends nicely onto the uppermost shelf for a better look. I am looking forward to modifying and adding on to this design to make it as useful as possible, so if you have any feedback let me know!<figure class="image image_resized" style="width:61.06%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000426986/design/2024-04-13_5504ad36c316c.gif"></figure>&nbsp;Update V1.1 - 4/19/24<ul><li>Wall mounting holes added to shelf for more placement options</li><li>Tray walls thickened to improve durability</li><li>Small adhesion / anti-warping changes made to shelf </li></ul>Thank you all for the feedback and suggestions!

Stackable Shelf Organizer

Organization

SlowEvo

Slug Trap with a threaded lid&nbsp;I had printed out <a target="_blank" href="https://www.thingiverse.com/thing:23467" rel="nofollow noopener">this</a> slug trap and it works great but the lid kept getting knocked off. This one is based off of that but I built it from scratch.&nbsp;Instructions:Fill with beer, screw on lid and place in your garden.&nbsp;Slugs are attracted to beer so much that they&#39;ll drown in it. Bye bye slugs! Well really they&#39;re attracted to the yeast in the beer so you could use a yeast mix.&nbsp;Since this will be used outside, if printed in PLA, heat and sunlight will quickly deform it. I strongly suggest you print with PETG or better.

Slug Trap

Garden

MiMa3D

Introducing ReachSwipe, the innovative solution to conquer those hard-to-reach areas above your dashboard with ease. Designed for convenience and efficiency, ReachSwipe is an easy-to-print and assemble car windshield cleaner specifically engineered to tackle those elusive spots on your windshield.&nbsp;The ReachSwipe works perfectly with a microfiber cloth. Simply cut out a piece measuring 125mm x 105mm and place it snugly under the clip. Clean or replace the cloth when necessary.&nbsp;Equipped with a unique 90° swivel that is seamlessly printed in place, a simple twist sets ReachSwipe in motion. &nbsp;Say goodbye to unreachable grime and hello to crystal-clear visibility with ReachSwipe - your ultimate windshield cleaning companion.

ReachSwipe

Cleaning

K2_Kevin

<h3>Hotend / ToolHead PTFE Guide v2</h3>Don&#39;t forget to Follow! Thank you so much for your Downloads, Like and BOOSTS!&nbsp;The PTFE guide is positioned so your PTFE tube no longer rubs the top glass. The perfectly designed connector, rotates smoothly and follows the motion of your Bambu Hotend. The natural curve, without restriction to the PTFE tube helps reduce AMS Filament retraction errors.<ul><li>Fast &amp; Easy print in all materials</li><li>No supports required</li><li>Perfect smooth fit on PTFE connector</li><li>Rotates freely</li><li>Helps resolve AMS Filament Retraction problems</li><li>Prevents PTFE tube from touching glass top</li><li>Provides a natural curve to the PTFE tube</li></ul>Please don&#39;t forget to ❤ Like and ★ Rate!&nbsp;INSTALLATION:<ul><li>Feed PTFE tube through guide, pushing the curve in PTFE helps slide through the bottom.</li><li>Attach PTFE to Hotend connector</li><li>Lower Guide onto connector and use mild force at an angle to snap on guide connector</li></ul>REMOVAL:<ul><li>I rotate guide so the PTFE is pointing forward, while pulling up/bending it forward.</li><li>Be prepared… this PTFE guide might break or bend at the bottom during removal, be ready to print another.</li></ul>&nbsp;NOTE: I recommend using PETG or ABS/ASA that can handle the higher temperatures of the print chamber.  <h3>Check out a few other helpful accessories for smooth operation.</h3><a target="_blank" href="https://makerworld.com/en/models/52179#profileId-53992" rel="nofollow noopener">AMS Buffer Block</a><a target="_blank" href="https://makerworld.com/en/models/52179#profileId-53992" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000152636/design/2024-04-01_94be6ea3d1f74.png"></a>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/51579#profileId-105225" rel="nofollow noopener">AMS Support Button</a><a target="_blank" href="https://makerworld.com/en/models/51579#profileId-105225" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000152636/design/2024-04-01_e1bb7a4ccb38c8.png"></a>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/93011#profileId-99425" rel="nofollow noopener">PTFE Coupler Support</a><a target="_blank" href="https://makerworld.com/en/models/93011#profileId-99425" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000152636/design/2024-04-01_429aa1362b6ba8.png"></a>

Other stuff

Organization

Garden

Cleaning

P1P