Ilia Toshev

AJ UGA

The meme of the duck with a knife. Base says "Don't Duck With Me". Meant to be printed with AMS to select 3 materials. Recommended (Yellow/gold; Grey/Black; Red).

Meme: Dont Duck With Me

pranks

3D design shop

What I like about my box is that it can be easily adapted to your needs.&nbsp;&nbsp;I recommend to print the top in scale 98%

Adjustable box

home improvement

Niya

GlennovitS 3D

Want a fidget toy from outer space? It will land on you desk very soon! Just print, spin and play - and enjoy. And please share your makes, in 1 or more colors :-)(If you want other toys, and maybe fidget toys in particullar, then follow me for more - and see my super popular Tactile Fidget Rings!)<a target="_blank" href="https://makerworld.com/en/models/65777#profileId-69112" rel="nofollow noopener">https://makerworld.com/en/models/65777#profileId-69112</a><h2>Overview</h2>The model is print-in-place. But within the slicer you can color it easily (fx. in Bambu Studio). You can also download my pre-painted print profiles and simply hit print!Does it spin forever (or even close)? No! But does it look cute? Yes! :-)<h2>Assembly</h2>None. Just print and play!<h2>Print instructions</h2>Should be pretty straight forward with default settings. But a couple of notes:<ul><li>Brim: No (to avoid the parts fusing together)</li><li>Supports: No - the model is designet to print easily without :-)</li><li>Layer height: To get a smooth curve, you can use adaptive/variable layer height.</li></ul>&nbsp;Happy printing!&nbsp;<h2>Want to show your support?</h2>You can see all my designs on Printables - and you can become an active supporter. I would really appreciate it!<a target="_blank" href="https://www.printables.com/@GlennovitS3D" rel="nofollow noopener">https://www.printables.com/@GlennovitS3D</a>

UFO Fidget Toy (spin and play)

Toys

Swiger3D

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Blue At layer #10 (0.88mm) swap to Red At layer #16 (1.36mm) swap to Orange At layer #18 (1.52mm) swap to White for the rest

Jordan 1 splash of colors  - Hueforge 5 colors filament painting

shoe

Bottega.co.nz

Original art created by us, then we used Hueforge to create this 200x200 piece.&nbsp;Please share your prints&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Filaments Used: PLA PolyLite Pro Black PLA PolyLite Steel Grey PLA PolyLite Grey PLA PolyLite Pro White &nbsp;Swap Instructions: Start with Black At layer #5 (0.48mm) swap to Steel Grey At layer #10 (0.88mm) swap to Grey At layer #15 (1.28mm) swap to White for the rest.

Yoda - Hueforge

StarWars

Bedlam Threadz

UPDATE: I have uploaded a profile with the model for a square frame lock that fits this frame as per a request. This is really only necessary if you have thinner prints that bow using the original locks.&nbsp;Please use my print profile as the frame locks have a tight tolerance and results may be problematic otherwise.&nbsp;This frame is completely custom designed to hold most 200x200 Hueforge prints of varying depths. It should hold prints up to 6mm, which is far deeper than most prints. The frame locks have a nice tight fit to hold the prints of varying depths. This model is completely designed by me for the purpose of retailing my Hueforge prints, which I am constantly updating on my <a href="www.bedlam3dz.com" rel="nofollow">Website</a>, and is strictly for personal use. If you would like to resell this model check out my club on Printables. &nbsp;This frame will perfectly fit all models I upload, and the vast majority of 200x200mm prints that others have shared. The hanger cutout is made so that prints with lob sided weight can be adjusted by using the teeth to easily level it. The frame is printed face down for a nice finish. Your plate type will determine the type of finish on the front side of the frame. I have used the gold textured plate that comes with the P1S in the attached photos.&nbsp;PRINT and ASSEMBLY:&nbsp;No supports needed. 0.16 Optimal layer height has provided the cleanest prints, especially the sides of the frame.Print both plates. 1 frame and two locks.Place the frame face down on a surface that will not scratch it.Orient your print face down so that the top aligns with the wall hanger cutout and insert it into the frame.Insert one frame lock at a time and make sure you are pushing both ends in evenly. If you try to push one side at a time it will bind up. If you push one side in too far compared to the opposite side just flip it over and push it back out and retry until it is in properly.It is a simple process and everyone that does not require a caution label on their coffee should breeze through it.&nbsp;

Classy Hueforge Frame

Hue Forge

Black Glovz

2 part Snowflakes. They snap into eachother. Can be combined&nbsp;More snowflake models in my Christmas collection:&nbsp;<a target="_blank" href="https://makerworld.com/en/u/1370809146/collections/59939" rel="nofollow noopener">https://makerworld.com/en/u/1370809146/collections/59939</a> &nbsp;

3D Snowflakes Pack

Christmas 

Bambu Lab

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000013717/design/2023-09-19_9f3e533f94456.jpg"></figure>This LED lamp project offers two types of 3D-printed lamps. Type A features a hollowed-out and angular design, while Type B showcases textured and wavy patterns. To achieve the best lighting and shadow effects while maintaining a balance between translucency and light guidance, we have carefully selected suitable LED light sources and recommend using Bambu PLA Basic Jade White filament for this project.&nbsp;Recommended filaments: Bambu PLA Basic Jade White<a target="_blank" href="https://store.bambulab.com/products/pla-basic-filament?variant=40820833517683" rel="nofollow noopener">https://store.bambulab.com/products/pla-basic-filament?variant=40820833517683</a>Hardware Kit: LED Lamp Kit-001<a target="_blank" href="http://store.bambulab.com/products/led-lamp-kit-001" rel="nofollow noopener">http://store.bambulab.com/products/led-lamp-kit-001</a>&nbsp;Please make sure you clean the build plate before printing and/or applying glue to prevent print failures.&nbsp;Follow the Assembly Guide below step by step to print and assemble your build. Refer to the Design Guide for further design and quality enhancement.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000013717/design/2023-09-15_31832bf687dbb.png"></figure>

LED Lamp 001

Design furniture 

chiz_m

If you like to show appreciation for the effort that went into creating this model, pls hit that BOOST button!&nbsp;Santa Hat now available! <a target="_blank" href="https://makerworld.com/en/models/75526#profileId-80041" rel="nofollow noopener">Download it here!</a><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000012963/design/2023-11-30_237796b35ce0f.jpg"></figure>____________Easy-to-assemble, quick print, kit card of Minecraft Pig in mini figure scale. Parts can easily be removed from the sprue without using cutters/clippers just by twisting the part.Print as oriented, with NO supports needed. Model comes with breakaway supports.Default scale is comparable to the Minecraft mini figures but of course you can scale it up to as large as you want! :)<h4>Usage Options</h4><ol><li>Assemble as is and use as toy/collectible; or</li><li>Use the alternative part with loop and glue the halves together to make for a great keychain ornament!</li></ol>

Minecraft-inspired Pig Mini Figure Kit / Keychain

Minecraft

tooling_lee

I wanted an iPad stand that also would hold my pencil. I have designed 2 models, with and without case. Should work with other tablets.

iPad stand with Pen Holder

phone/tablet

Chris1974

<h2>Update 14-2-2024</h2>I have updated the models and print profiles to make room for the exhaust opening on the back op the printers. It was blocking it just for a small ammount but now it is totally clear.<h2>A big Poopchute that prints fast!</h2>Made this bucket to collect the Bambu Lab X1 Carbon droppings at the back of the machine. Made it really thin so it prints fast!Logo does not need support if your printer is dailed in correctly. &nbsp;Beware: the model is thin (0.8mm). It still is plenty strong for collecting the poop and it works great. If you want a thicker version please select the thicker print profile (1.6mm), but it will take about twice as long to print.

Poop chute Carbon X1C - P1P - P1S

printer upgrades

BODY3D

Juste a cute Ghost !Print it without supports =)&nbsp;Video : <a href="https://www.tiktok.com/@body3d_/video/7151361561372691717" rel="nofollow">https://www.tiktok.com/@body3d_/video/7151361561372691717</a>