Iknocks

TCCINTHEHOUSE

This is a folding hanger that saves you space! There are three different versions: there is a plain version, a plastic savings version, and a multicolor version. All of these hangers are designed to not be flimsy and they can hold heavy clothes. &nbsp;Assembly:<ol><li>Print out all of the parts. (1 pair of the arms of your choice, the hook of your choice, and two screw in pins.<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000486849/design/2024-06-06_262b9c3786aeb.jpg"></li><li>Line one of the arm&#39;s holes to the hook&#39;s hole.<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000486849/design/2024-06-06_f3d3eba09b5d9.jpg"></li><li>Screw in a pin, making sure it is screwed all of the way in.<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000486849/design/2024-06-06_d461929599a0d.jpg"></li><li>Repeat steps 2 and 3 on the other side.<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000486849/design/2024-06-06_d0b043ce1e4cc.jpg"></li></ol>

Folding Hanger

Divers

ggiovinazzo

2024/06/17 (V2) <ul><li>Fixed an error that caused some open edges (slicer usually fixed the errors)</li><li>Customizer minor bugfixes for boolean checkboxes</li><li>Added new cellspan system, see below for further explanation </li></ul>&nbsp;Parametric Model of a Box with Separators.<figure class="table" style="height: 86.7812px; width: 812px"><table style="background-color: rgb(210, 210, 255); border: 1px groove rgb(190, 210, 220)"><tbody><tr><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em; text-align: center">If you like this model, please give a 👍And if you feel geneous, give me a boost .  Grazie Mille!</td></tr></tbody></table></figure>Feel free to comment if you have any suggestion or request to improve the model.&nbsp;The lid has been designed for an easy snap-on connection.The tolerance can be adjusted by modifying the parameters of the parametric model.&nbsp;If printing with a flow rate different from 1, it is a good idea to adjust the lid tolerance.&nbsp;The size of the box can be adjusted to your needs.&nbsp;I have also added the possibility to add &#34;watermarks&#34; for the separators on the lid, so the content of each compartment can be written on it.&nbsp;With the parametric model, you can decide either the internal or external size of the box, depending on whether you need a specific external size for the box or a specific size for internal storage.&nbsp;You can also decide how many dividers to generate horizontally and vertically.If you need no separators, the values can be set to 0 and no compartmentsYou can also decide how many dividers to generate horizontally and vertically.If you need no separators, the values can be set to 0 and no compartments will be generated.&nbsp;NEW Feature!Now span can be defined in customizer. To enable click in “span advanced” checkbox&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000476274/design/2024-06-18_768f4e3b3a67f.png"></figure>To define how span must be applied you must modify “span config” parameterEach block of span config (separated by - ) specify the following data:<ul><li>On which x-axis cell must begin the span</li><li>On which y-axis cell must begin the span</li><li>How many cells of horizontal span to apply</li><li>How many cells of vertical span to apply</li></ul>Using the example in the above image in a box of 4x3 cells the following span will be generated:&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000476274/design/2024-06-18_f133b9166d633.png"></figure>&nbsp;&nbsp;<figure class="table" style="width: 100%"><table class="ck-table-resized"><colgroup><col></colgroup><tbody><tr><td>If you like you can check my other parametric models:</td></tr></tbody></table></figure><h4>Parametric Connectable Text Sign</h4><a target="_blank" href="https://makerworld.com/en/models/483859#profileId-396143" rel="nofollow noopener">https://makerworld.com/en/models/483859#profileId-396143</a>&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000476274/design/2024-06-04_aef65c2701f83.png"><h4>Parametric soap-box with snap-on lid</h4><a target="_blank" href="https://makerworld.com/en/models/476276#profileId-387207" rel="nofollow noopener">https://makerworld.com/en/models/476276#profileId-387207</a>&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000476274/design/2024-06-04_95d316d97ebe2.png" alt="Parametric soap-box with snap-on lid">&nbsp;&nbsp;&nbsp;

Parametric box snap-on lid and customizable cells

Boxes

hartmann82

This is a milti Board Tile 8x6, corner core and side

Multiboard Parametric

Organizer

SirPrintAlot

AMS button as many with Bambulab logo, the difference is that the PTFE tube is securly attached to the button and the guide prevents AMS clogs when using other spools than the normal Bambulab ones.&nbsp;&nbsp;Print 4x AMS button and the guide and screw down the PTFE tube (4cm) into the button and in the other end attach the guide.The AMS button fits on the original AMS infeed button place on the “thumb piece” and press down over the filament infeed hole.&nbsp;You can also see my other printable add-ons for the Bambulab printers:<a target="_blank" href="https://makerworld.com/en/models/402613#profileId-304285" rel="nofollow noopener">https://makerworld.com/en/models/402613#profileId-304285</a> (Dual purpose bed scraper)<a target="_blank" href="https://makerworld.com/en/models/394761#profileId-295931" rel="nofollow noopener">https://makerworld.com/en/models/394761#profileId-295931</a> (If you need to connect two bowden/PTFE tubes)<a target="_blank" href="https://makerworld.com/en/models/393265#profileId-294453" rel="nofollow noopener">https://makerworld.com/en/models/393265#profileId-294453</a> (Y-splitter connector for PTFE tube)

Divers

Boxes

Organizer

X1C