I am BRoot

thrutheframe

<h3>NOTE:</h3><ul><li>Please read the instruction guide below</li><li>I do my best to double-check and test the print profile I create. They are up to date with whatever changes I made to the designs. If you are using profiles made by others, please check if they are updated.</li></ul>&nbsp;<h3>UPDATE: 3 JAN 2024</h3>I have added a version of the BIN that will work with the Bambu Lab Z-Stiffener. It is on Build plate 2.<figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/346126/2024-01-03_8bd5d74720bb9.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/346126/2024-01-03_16b719cd2144e.png"></figure></td></tr></tbody></table></figure>&nbsp;<h3>INTRODUCTION</h3>All Bambu printers poop. So here is a Poop Management System (PMS) for A1. The system consists of a purge guide and a bin. I have added the <a target="_blank" href="https://makerworld.com/en/models/91481#profileId-97865" rel="nofollow noopener">Stabilization Bracket for A1</a> in this project build plate. You might want to try using it with/without the <a target="_blank" href="https://makerworld.com/en/models/90586#profileId-96991" rel="nofollow noopener">GRIP bracket</a> to improve the stability of the A1 printer.<figure class="table" style="width:89.28%;"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/346126/2023-12-13_c0abab96e0d06.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/346126/2023-12-13_ac7c55c15ff49.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/346126/2023-12-13_170cda32f15e3.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/346126/2023-12-13_508805f48faf6.jpg"></figure></td></tr></tbody></table></figure>&nbsp;<h3>INSTRUCTION</h3><ul><li>Print build plates 1 & 2</li><li>Paste a piece of tape over the area as shown in the image below. During purging, the tip of the purge can still be molten and can accidentally adhere to the wall. The tape helps to reduce the chance of this happening.</li><li>Slide the purge guide into the purge wipe as seen in the image. It should fit snugly.</li></ul><figure class="table" style="width:96.81%;"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/346126/2023-12-13_19a14b0cca0d8.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/346126/2023-12-13_aa7a5482d8532.jpg"></figure></td></tr></tbody></table></figure>&nbsp;<ul><li>The bin should be fitted into the left Z-beam as seen in the image below.</li></ul><figure class="image image_resized" style="width:59.91%;"><img src="https://makerworld.bblmw.com/makerworld/draft/346126/2023-12-13_64830ac1a7016.jpg"></figure>&nbsp;<ul><li>Turn on the A1 printer and do a home to ensure proper clearance.</li><li>All the best and welcome to a poop-free table.</li></ul>&nbsp;&nbsp;&nbsp;“Friends do not let friends poop everywhere…” Poobymeister<figure class="image image_resized" style="width:60.09%;"><a href="https://thangs.com/designer/DaveMakesStuff/3d-model/Doggy%20Poo%20Candy%20Box-973574" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/346126/2023-12-13_e2df74deec799.jpg"></a><figcaption>Doggy Poo Candy Box by DaveMakesStuff</figcaption></figure>&nbsp;<h3>CONCLUSION</h3>To date, my designs are free to download and use. There is no Patreon or OnlyFan (hahaha). If you like my designs and wish to contribute to my coffee addiction & help fund the filaments and materials needed for prototyping, a donation of $5-$10 to <a target="_blank" href="https://ko-fi.com/thrutheframe" rel="nofollow noopener">Ko-fi</a> or <a target="_blank" href="https://www.paypal.com/paypalme/shannonheng" rel="nofollow noopener">paypal.me</a> will be greatly appreciated.&nbsp;<h3>CAVEAT</h3>As with all my designs, Prototyping and testing were conducted to ensure printability and meet my own expectations. However, I understand it may and may not work for you. I would request that you read all instructions and print and install them at your own discretion.

A1 PMS (Purge Management System)

A1 Stuff

ostat

<h3>OpenSCAD project to create vacuum hose connectors.</h3>Intended for generating connections that would allow connecting vacuum hoses and tools of different diameters together.Parametric settings support a few connections types. The connections types can be used on ether end of the adapter.&nbsp;The project is actively maintained by myself. Please submit bugs and suggestions at the GitHub repo. <a target="_blank" href="https://github.com/ostat/vacuum-hose-adapter-openscad" rel="nofollow noopener">ostat/vacuum-hose-adapter-openscad</a>.<h2><img class="image_resized" style="width: 38.95%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000481868/design/009a8b5b-07b6-4bf0-8809-e2ad229be092.gif"></h2>&nbsp;Connector types<figure class="table" style="width: 100%"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td> Hose connector  The hose connector is the most generic connector. Its intended to be pushed inside a hose or over an existing connector. We can enable a stop to prevent the adapter being pulled in to the hose, and barbs for soft style pipe.  Options<ul><li>Length<ul><li>The length of the connection end</li></ul></li><li>Diameter<ul><li>Internal or external diameter of the intended connector.</li></ul></li><li>Taper<ul><li> Tapered to allow for a tight push fit</li></ul></li><li>Barbs</li><li>Stop</li></ul>Official Documentation <a target="_blank" href="https://docs.ostat.com/docs/openscad/hose-adapter/connectors/hose" rel="nofollow noopener">docs.ostat.com/docs/openscad/hose-adapter/connectors/hose</a></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000481868/design/2024-06-01_ed350451c1e9a.gif"></figure></td></tr><tr><td>NozzleA configurable nozzleOptions<ul><li>Nozzle Shape<ul><li>square: a square tip, where you can control the width and depth of the tip, and the corner radius</li><li>circle: A round tip, where you can control the radius.</li></ul></li><li>Nozzle_Size<ul><li>Size of the nozzle tip, in the format of [width, depth, length]</li></ul></li><li>Wall Thickness</li><li>Nozzle_Radius   </li><li>Nozzle_Offset    </li><li>Nozzle_Chamfer_Percentage     </li><li>Nozzle_Chamfer_Angle</li></ul>Official Documentation<a target="_blank" href="https://docs.ostat.com/docs/openscad/hose-adapter/connectors/nozzle" rel="nofollow noopener">docs.ostat.com/docs/openscad/hose-adapter/connectors/nozzle</a></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000481868/design/2024-06-01_470047bc1b6da8.gif"></figure></td></tr><tr><td>FlangeCustomisable flange for attaching to boxes or wall.&nbsp;Options<ul><li>Flange_Width     <ul><li>Width of Flange added to the connector diameter</li></ul></li><li>Flange_Thickness  <ul><li>Thickness of the flange</li></ul></li><li>Flange_Screw_Position <ul><li>Position of the screws added to the connector diameter</li></ul></li><li>Flange_Screw_Border     <ul><li>Minimum amount of the material around the screws</li></ul></li><li>Flange_Screw_Count     <ul><li>Number of Screw holes flange</li></ul></li><li>Flange_Screw_Diameter</li></ul>Official Documentation<a target="_blank" href="https://docs.ostat.com/docs/openscad/hose-adapter/connectors/flange" rel="nofollow noopener">docs.ostat.com/docs/openscad/hose-adapter/connectors/flange</a></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000481868/design/2024-06-01_3772a84429e99.gif"></figure></td></tr><tr><td>Magnetic flange connectionIntended for creating a quick removable connection. Allowing the hose to be quickly moved form device to device. The magnets should be slightly recessed so that the two faces get a good seal, allow extra depth if you want to avoid supports.  Main setting:<ul><li>Flange diameter: Internal diameter of the flange connection.</li><li>Flange thickness: The overall thickness of the flange. Magnet thickness plus 4mm seem to work well.</li><li>Connector length: The length of the connector before the tapered section will start.</li><li>Magnet count: Number of magnets to be added to the flange.</li><li>Magnet diameter: Diameter of the magnets (add 0.5 to measurement).</li><li>Magnet border: The amount material around the magnet.</li><li>Magnet thickness: Thickness of the magnets (add 0.5 to measurement, 1.0 to avoid supports).</li><li>lip: If an alignment ring should be supported, can be recessed or protruding, suggest recessed.</li></ul></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000481868/design/2024-06-01_32584b3954dc8.gif"></figure></td></tr><tr><td>Fixed connectorsConnectors that are not configurable as they are designed to be compatible with an existing connector type.&nbsp;Options<ul><li>Dyson V6 connector<ul><li>Compatible with Dyson V6 vacuums. </li><li><a target="_blank" href="https://docs.ostat.com/docs/openscad/hose-adapter/connectors/dyson" rel="nofollow noopener">Doco</a></li></ul></li><li>CAMLOCK connector<ul><li>Compatible with PeterH&#39;s </li><li><a target="_blank" href="https://www.printables.com/model/461256-shopvac-50mm-camlock-connectors-with-magnetic-catc" rel="nofollow noopener">camlock connectors</a> <a target="_blank" href="https://docs.ostat.com/docs/openscad/hose-adapter/connector/camlock" rel="nofollow noopener">Doco</a></li></ul></li><li>Dewalt DW735x<ul><li>Dewalt DW735 Planer </li><li><a target="_blank" href="https://docs.ostat.com/docs/openscad/hose-adapter/connectors/dw735" rel="nofollow noopener">Doco</a></li></ul></li><li>Cen-Tec quick connect <ul><li>Cen-Tec Female</li><li>Cen-Tec Male</li><li><a target="_blank" href="https://docs.ostat.com/docs/openscad/hose-adapter/connectors/centec" rel="nofollow noopener">Doco</a></li></ul></li><li>Makita quick connect<ul><li>Makita quick connect compatible (not tested)</li></ul></li><li>osVAC<ul><li>osVAC M32<ul><li>Male connector compatible with Original osVAC</li></ul></li><li>osVAC Male<ul><li>Male connector compatible with Original osVACneo, support variable diameter</li></ul></li><li>osVAC F32<ul><li>Female connector compatible with Original osVAC</li></ul></li><li>osVAC Female<ul><li>Female connector compatible with Original osVACneo, support variable diameter</li></ul></li><li><a target="_blank" href="https://docs.ostat.com/docs/openscad/hose-adapter/connectors/osvac" rel="nofollow noopener">Doco</a></li></ul></li></ul></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000481868/design/2024-06-03_fc82126a83115.gif"></figure></td></tr></tbody></table></figure>&nbsp;TransitionsUsing the above listed connectors we have a few options of how to transition between the end1 and end2.<figure class="table" style="width: 100%"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td>Options<ul><li>Transition_Style<ul><li> taper+bend: Taper then bend</li><li>bend+taper: Bend then taper</li><li>organicbend: fully tapered bend</li><li>hull: Hull for multiple end count</li><li>flat: basic flat transition.</li></ul></li><li>Transition_End2_Count<ul><li>one to many adapter</li></ul></li></ul>&nbsp;There are many other options available,Official Documentation<a target="_blank" href="https://docs.ostat.com/docs/openscad/hose-adapter/transition" rel="nofollow noopener">https://docs.ostat.com/docs/openscad/hose-adapter/transition</a></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000481868/design/2024-06-02_d89390625a92a8.gif"></figure></td></tr><tr><td>Support for three unique connectors&nbsp;Updated 2024 to add support for an adapter with three different connectors.When using the Hull transition. You have the option to add a center adapter. This third adapter can be, end1, end2 or end3. (previously it could only be end2)<ul><li>pink, end1</li><li>blue, end2, you can adjust the angle and count.</li><li>purple, can be end1, end2 or end3</li></ul>  &nbsp;&nbsp;</td><td><figure class="image image_resized" style="width: 97.2%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000481868/design/2024-06-06_602056cb886a38.png"></figure></td></tr></tbody></table></figure>  Related models, for pre-generated adapters. <a target="_blank" href="https://www.printables.com/social/210306-max/collections/357939" rel="nofollow noopener">Hose Fittings collection</a><ul><li><a target="_blank" href="https://www.printables.com/model/316283" rel="nofollow noopener">Vacuum nozzles for all common hose sizes</a></li><li><a target="_blank" href="https://www.printables.com/model/297912" rel="nofollow noopener">Vacuum hose flanges to connect to flat surfaces</a></li><li><a target="_blank" href="https://www.printables.com/model/303766" rel="nofollow noopener">Dyson V6 hose attachments</a></li><li>Vacuum hose adapters<ul><li><a target="_blank" href="https://www.printables.com/model/283238" rel="nofollow noopener">Straight hose adapters</a></li><li><a target="_blank" href="https://www.printables.com/model/325999" rel="nofollow noopener">Y connector / splitter for all common sizes</a></li><li><a target="_blank" href="https://www.printables.com/model/284701" rel="nofollow noopener">30° elbow hose adapters</a></li><li><a target="_blank" href="https://www.printables.com/model/284834" rel="nofollow noopener">30° tapered elbow hose adapters</a></li><li><a target="_blank" href="https://www.printables.com/model/284846" rel="nofollow noopener">45° elbow hose adapters</a></li><li><a target="_blank" href="https://www.printables.com/model/284877" rel="nofollow noopener">45° tapered elbow hose adapters</a></li><li><a target="_blank" href="https://www.printables.com/model/284879/" rel="nofollow noopener">90° elbow hose adapters</a></li><li><a target="_blank" href="https://www.printables.com/model/284929" rel="nofollow noopener">90° tapered elbow hose adapters</a></li></ul></li><li>Magnetic Hose connectors<ul><li><a target="_blank" href="https://www.printables.com/model/283250" rel="nofollow noopener">50mm magnetic hose connectors</a></li><li><a target="_blank" href="https://www.printables.com/model/283255" rel="nofollow noopener">100mm magnetic hose connectors</a></li></ul></li><li>Barbed tube connectors<ul><li><a target="_blank" href="https://www.printables.com/model/328572" rel="nofollow noopener">Tube Fittings 4mm-24mm</a></li><li><a target="_blank" href="https://www.printables.com/model/328599" rel="nofollow noopener">Vacuum hose to tubing adapters for all common sizes</a></li><li><a target="_blank" href="https://www.printables.com/model/328572" rel="nofollow noopener">Tube Y connector / splitter fittings 4mm-24mm</a></li></ul></li></ul>

Parametric vacuum hose connector

SCAD

maegu_

Wall Art - Bonsai

Luke

Gridfinity storage for A1 series nozzles. The uploaded profile was printed in ABS/ASA but any regular filament should work fine.&nbsp;Original Onshape CAD is <a target="_blank" href="https://cad.onshape.com/documents/59b2c3dd3a60fc3d66f129ea/w/f672d5f3de6740f5509f73cd/e/8bb9dc457d68d043c91b4991?renderMode=0&uiState=65a5ac343f099e1e33431656" rel="nofollow noopener">available here</a>.

Gridfinity storage for A1 nozzles

Gridfinity

CrispyW

Simple small handle to better handle your A1 mini plates.Easier to lift the warm plate from the bed, wash and to avoid leaving grease from your fingers in general.Especially useful for washing your build plates.&nbsp;Small size allows ring to be left on the plate during printing.Tested and functions well with A1 mini Bambu Textured and Smooth plates.&nbsp;Assembly: Look at the images with gray ring.<ol><li>Insert half with the pegs through the plate</li><li>Push the other half in to the slots in the pegs</li><li>Push the two rings together.</li></ol>It's a tight fit but that's by design!&nbsp;!!Compatibility with other size plates or devices has not yet been tested!!&nbsp;Please let me know of any issues and feedback in general is appreciated.&nbsp;Updates:-V2: Added a much stronger connection for the two parts, still hardware free.&nbsp;

Build plate ring V2, handle, holder A1 mini

Printed

iLab 3D

A tiny and simple filament clip. Easy to print, easy to use.&nbsp;FLAT VERSION: <a target="_blank" href="https://makerworld.com/it/models/133286#profileId-144555" rel="nofollow noopener">CLIPPY - filament clip - flat version by iLab 3D - MakerWorld</a>&nbsp;Plese, consider my other models:<a target="_blank" href="https://makerworld.com/it/u/15446660" rel="nofollow noopener">iLab 3D | Published - MakerWorld</a>

CLIPPY - Filament clip

favs

3D Color Hub

<h3>Update:</h3>Wow - its been close to a year since I posted this! The build has taken longer than I had hoped, due other responsibilities but its coming along nicely. I have attached some photos showing its current state, as well as photos of the hinges in use. The door is offset from the cabinet to allow room for a 3/8" weather seal, as well as allowing the outer edge of the door to swing “in”, so it will not need additional room on the side of the cabinet with a normal, outside hinge such as your refrigerator door.You'll notice I have a second set of rods in the back of the left side to support the filament - this was due to a manufacturing flaw - I was so focused on accounting for the largest spool I had, I forgot to account for the tray I wanted to go under each set of rods. As a result the smaller set of spools would sit just low enough to cause an issue. I printed some adapters to add to the top of the existing ones, and added a rod there. This in effected reduced the distance, raising the spools the 1/2'" needed for clearance.<h3>Introduction</h3>This is actually my second attempt at a filament storage solution. The first one involved hangars and rod system, attached directly to the wall, where I could slide filament back and forth as needed and load it into my Ender system. It would have also worked well with a variety of MMU solutions as all the filament was supported by ball bearings.Unfortunately, the system could only hold 40 rolls of filament and I had outgrown it before I had even completed the project - so on to attempt #2! A free-standing cabinet that could not be more than 4 ft. wide, had to fit through my doorways (so less than 6 ft. 6 in. height), and preferably no more than 1 ft. deep if possible, so as to limit how far it reached into my available office space. All this plus had to be stable, on wheels, with doors and the ability to seal it against humidity.I had never worked with Melamine, but I knew some of its properties would solve a lot of issues for me right out of the gate, such as its surface being sealed against humidity. Sure I popped a whole bunch of wholes into it right away, but that's a problem easily solved with more plastic and silicone sealant.As stated in summary, please note this is a work in progress and some materials and designs are subject to change as I progress through the build.The complete instruction guide on how to assemble, including drill spacing and sizes, will be written up once the unit is complete.<h3>Printed Parts</h3><h4>Cabinet Rod & Tray Supports</h4>28x: Outer Rod Support - Main (PETG) 14x: Inner Rod Support - Main (PETG) 21x: Inner Rod Support 1 (PETG) 21x: Inner Rod Support 2 (PETG)<h5>Mating of Rod Supports</h5>All 28 of the “Outer Rod Support - Main” are mated to 14 of the Inner Rod Support 1 and 14 of the Inner Rod Support 2All 14 of the "Inner Rod Support - Main" are mated to 7 of the Inner Rod Support 1 and 7 of the Inner Rod Support 2<h4>Desiccant Tray (per row/col, 6 rows x 2 columns: 12 total trays)</h4>Note: You don't need a desiccant tray for every area. I am still testing but am anticipating a tray every other row in a vertical sense would be fine.Also, the Plug I found worked best printed in TPU at 97% its size for a snug but easy to grip piece.1x: Desiccant Tray 1 (left side) (PLA) 1x: Desiccant Tray 2 (middle) (PLA) 1x: Desiccant Tray 3 (Right side w/fill hole) (PLA) 1x: Desiccant Tray Plug (TPU) - Print at 97% 1x: Desiccant Tray Cover 1 (left) 1x: Desiccant Tray Cover 2 (middle) 1x: Desiccant Tray Cover 3 (right)<h4>Rod Support Instructions</h4>The rod supports are meant to slide into a 1-¼" hole, and one side will nest inside the other, making a nice close fit for a 1" OD rod or tube). I would recommend using a fostner bit as a hole saw tends to wobble too much and generate an irregularly shaped hole, or one that at allows for much too much play.The parts are designed for a “snug” fit. They do include a hole for passing a bolt through to tight down if needed, but I found that due to their typical usage a simple silicone sealant is good enough to provide the friction so they wont move once installed.<h3>Complete Cabinet BOM</h3><h4>Cabinet BOM</h4>The cabinet build consists of:3x: 1 ft. x 6 ft. x ¾" Melamine Shelf (sides, and middle brace) 2x: 1 ft. x 4ft. x ¾" Melamine Shelf (top and bottom) 1x: 4 ft. x 6ft. x ½" Melamine Panel (backer board) 2x: 2 in. x 4in. x 4ft. stud 2x: 2 in. x 4in. x 1ft. stud1 Tube Silicone Sealant50x: 7 mm x 50 mm Highpoint Confirmat Screws, Pozi-Flat Head, Zinc Finish 3x: 170 Degree Concealed Hinge Frameless Cabinet Hinge Hydraulic Adjustable Installation Soft Closing, Full Cover (yes the hinge was overkill, but there is a method to the madness)4x: 2" locking caster wheels, 150lb capacity (total of 450lb) <h4>Silica Desiccant Tray BOM (per tray)</h4>PLA and/or PETG. I used both. PLA for the base, and PETG for the cover (for higher transparency value). Eventually I will be adding a heater to the system, but until then PLA is what I have on-hand for the base and I can always reprint later40x: Steel Thread Rolling Screw for Plastic, Black Oxide Finish, 82 Degree Flat Head, Star Drive, #4-20 Thread Size, 1/2" Length1 lb. of reusable silica desiccant beads (per tray, really up to you how full you want the trays)2x: 6061 Aluminum Round Rod 11.9" Long 1/4" rods to give the tray support since its printed in multiple pieces (I used the following): <a href="https://www.amazon.com/dp/B0BNH5CP4V?psc=1&ref=ppx_yo2ov_dt_b_product_details" rel="nofollow">Amazon.com: 6061 Aluminum Round Rod 11.9" Long 1/4" Diameter Solid T6511 New Lathe Bar Stock for DIY Craft making-10 Pieces : Industrial & Scientific</a>&nbsp;

Filament Storage Cabinet

Possible Prints

DennisV

This is a Grinch Door Corner Deco i made by myself with Fusion360.The Printplates i uploaded are with AMS support.&nbsp;Merry Christmas ;)

Door Corner Grinch 

Christmas

Filamaze

Hi,&nbsp;Sunlu/Geeetech spool don't work with the new AMS lite so I made my own adapter for them ! Easy to print !this will make all your sunlu/Geeetech spool work on the AMS LITE ! &nbsp;**UPDATE V3** now print fast since its shorter and easyer to print !&nbsp;Enjoy printing :) &nbsp;If you like this model, please like it, rate it and follow me ! If you have any recommendation I will update it with different version number :) &nbsp;Go see all my other work ! &nbsp;Thank you