I-Vein The Terrible

Pretzel 3D

*** Link to v2.0 of this dock if you would rather use that design - <a target="_blank" href="https://makerworld.com/en/models/178613" rel="nofollow noopener">https://makerworld.com/en/models/178613</a> (this will require magnets and replaces the need for the original magnetic dock) ***&nbsp;Note: This design changes no stock parts on either the Panda Touch or the Bambu lab printer, this is just and additional mount to attach the Panda Touch to the printer.&nbsp;*** Update like I have add on my V2 I have add a small hole for the full surround mount to allow access to push the buckle on the stock screen when you want to remove it in the future, this allows you to slip a small allen key through ***&nbsp;&nbsp;*** Update I have added a new mount based on requests with a cable channel available on the other side and a stand off so stock screen buttons should not get pressed (unless you push down hard on the bottom right have corner) ***&nbsp;Ever since I saw the new panda touch screen I though using @TeachingTech design would be a great addition and make your P1 printer look even more like the X1.&nbsp;I have now update the design to have a cable channel in the mount so it does not bind on the screen when lowered. &nbsp;I have also add on a different adapter that surrounds the screen to use this you will need to remove the screen and release the cable then install the mount and plug the cable back in. This mount will be more secure to the movement of the screen and is based on MorikoStyles design that i was using previously.&nbsp;You will need some longer screws to attach the top two mounting points as the ones supplied are not long enough I used 6mm ones i had lying around.&nbsp;Hardware&nbsp;2 x M3 x 4mm countersunk bolts for attaching the bottom points to the charging dock. (these are the stock ones that come with the screen)2 x M3 x 6mm countersunk bolts for attaching the top mounting points to the charging dock.2 x M3 x 12mm bolts for attaching the enclosure to the adaptor.&nbsp;Any other ideas shout and might be able to incorporate.

Panda Touch Screen Fold Mount

profile 5

Hiro Koiso Racing

Bambu Disconnect Tool Set Holder mounts to side of your HKR build plate storage system: <a target="_blank" href="https://makerworld.com/en/models/120963#profileId-130105" rel="nofollow noopener">https://makerworld.com/en/models/120963#profileId-130105</a><figure class="image"><a href="https://makerworld.com/en/models/120963#profileId-130105" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000128120/design/2024-01-11_57250f1b001dc.jpg"></a></figure>&nbsp;Neatly holds set of 6 tool from K2_Kevin. You can get tools set here: <a target="_blank" href="https://makerworld.com/en/models/14462#profileId-37136" rel="nofollow noopener">https://makerworld.com/en/models/14462#profileId-37136</a><figure class="image image_resized" style="width: 84.77%"><a href="https://makerworld.com/en/models/14462#profileId-37136" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000128120/design/2024-01-07_d53ffbb48e5fa.jpg"></a></figure>&nbsp;You can install this unit on left or right either side.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000128120/design/2024-01-07_bb73e3042ea7f.gif"></figure>&nbsp;Inside dimensions of the compartment below, so you can store whatever you like.<figure class="image image_resized" style="width: 80.04%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000128120/design/2024-01-07_87d717b2158e4.jpg"></figure><boostme><boosttitle>Boost Me</boosttitle><boostcontent>If you enjoyed this model, please consider boosting it to support creator. 
Thank you!</boostcontent></boostme>Check out side mount storage attachments.<figure class="image image_resized" style="width: 77.09%"><a href="https://makerworld.com/en/u/2567436854" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000128120/design/2024-01-07_4cf3948d62c17.jpg"></a></figure>&nbsp;・Bambu Scraper - Side mount: <a target="_blank" href="https://makerworld.com/en/models/127894#profileId-138413" rel="nofollow noopener">https://makerworld.com/en/models/127894#profileId-138413</a>・Bambu Disconnect Tool Set Holder - Side mount: <a target="_blank" href="https://makerworld.com/en/models/128120#profileId-138639" rel="nofollow noopener">https://makerworld.com/en/models/128120#profileId-138639</a>・Glue Stick Holder - Side Mount: <a target="_blank" href="https://makerworld.com/en/models/129474#profileId-140356" rel="nofollow noopener">https://makerworld.com/en/models/129474#profileId-140356</a>・Filament Cutter - Side mount: <a target="_blank" href="https://makerworld.com/en/models/129494#profileId-140382" rel="nofollow noopener">https://makerworld.com/en/models/129494#profileId-140382</a>・Deburring tool &amp; Allen Wrench - side mount: <a target="_blank" href="https://makerworld.com/en/models/129514#profileId-140406" rel="nofollow noopener">https://makerworld.com/en/models/129514#profileId-140406</a>・LED Controller - Side mount: <a target="_blank" href="https://makerworld.com/en/models/129536#profileId-140433" rel="nofollow noopener">https://makerworld.com/en/models/129536#profileId-140433</a><a target="_blank" href="https://makerworld.com/en/models/127894#profileId-138413" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000128120/design/2024-01-11_6868b9a27577e.jpg"></a><a target="_blank" href="https://makerworld.com/en/models/128120#profileId-138639" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000128120/design/2024-01-11_e8acc1f51f928.jpg"></a><a target="_blank" href="https://makerworld.com/en/models/129474#profileId-140356" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000128120/design/2024-01-11_468066191cbe.jpg"></a><a target="_blank" href="https://makerworld.com/en/models/129494#profileId-140382" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000128120/design/2024-01-11_4a4d9c8e64efe.jpg"></a><a target="_blank" href="https://makerworld.com/en/models/129514#profileId-140406" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000128120/design/2024-01-11_c2dab5019c2e9.jpg"></a><a target="_blank" href="https://makerworld.com/en/models/129536#profileId-140433" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000128120/design/2024-01-11_1ec7c75f930a2.jpg"></a>  Geometry of mounting slot below for those who want to design own attachments.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000128120/design/2024-01-06_f8d828d7283aa.jpg"></figure>Check out other AMS side mount accessories・Foladable AMS side mount spool holder - with Bearings: <a target="_blank" href="https://makerworld.com/en/models/153090#profileId-167255" rel="nofollow noopener">https://makerworld.com/en/models/153090#profileId-167255</a> ・Foladable AMS side mount spool holder - No Bearing: <a target="_blank" href="https://makerworld.com/en/models/145321#profileId-158083" rel="nofollow noopener">https://makerworld.com/en/models/145321#profileId-158083</a><figure class="image"><a href="https://makerworld.com/en/models/153090#profileId-167255" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000128120/design/2024-01-22_a165404e05b0c.jpg"></a><figcaption>With bearings <a target="_blank" href="https://makerworld.com/en/models/153090#profileId-167255" rel="nofollow noopener">https://makerworld.com/en/models/153090#profileId-167255</a></figcaption></figure><figure class="image"><a href="https://makerworld.com/en/models/145321#profileId-158083" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000128120/design/2024-01-22_d11bf6150b774.jpg"></a><figcaption>Without bearing; <a target="_blank" href="https://makerworld.com/en/models/145321#profileId-158083" rel="nofollow noopener">https://makerworld.com/en/models/145321#profileId-158083</a></figcaption></figure>Happy Printing!

Bambu Tool Set Holder - For Build Plate Storage

profile 3

mat.slowik02

Simple cable guide for A1 users to prevent it from falling onto the heatbed.&nbsp;*BEFORE USE*Note that the cable is relatively short and in the “poop position” might be a little tight, so:<ul><li>make sure you placed the print approximately in the middle of your A1</li><li>make sure you removed the PTFE star-shaped clip which is originally included with A1</li><li>moreover, during printing tall prints, pay attention to how the cable is arranged</li></ul>

A1 Hotend Cable Guide

profile 6

3DPrintWolf

hi i have be try best at low ploy / line art, i love how Charizard Pokemon V6 work out :) he is looking try to hit me :) !!!!!! This just note is model have two if you like just to have tails !!!  Add a new dimension to your collection with our geometric low poly 3D print file of Charizard Pokemon V6. This design gives a fresh twist to the classic Pokémon with crisp, edgy lines, creating a contemporary, faceted look. Ideal for Pokémon enthusiasts and admirers of minimalist art.&nbsp;i appreciate your support for my model. If you enjoy it or add it to a collection, please hit download to increase its exposure :) Thanks a lot!&nbsp;sign&nbsp;Playtoz / 3dprintwolf

Geometric Low Poly Charizard Pokemon V6

profile 4

HL3dDesign

Shelf bracket in size 30x30x30&nbsp;Print on the side for better stability.&nbsp;---------------&nbsp;Regalhalterung in der Größe30x30x30&nbsp;Auf der Seite drucken für bessere Stabilität.&nbsp;Hit Like, rate and comment!

90 Degree Bracket 30x30x30

brackets and such

Leo.w8

Introducing the Ultimate DIY Durable Tool Box – Your Next 3D Printing Project!&nbsp;Are you ready to take your 3D printing skills to the next level? I've designed a robust and versatile tool box model that you can easily print yourself, and the best part is, it's absolutely free for you to download and create at your convenience.Features:&nbsp;<ol><li>Sturdy Design: This DIY Durable Tool Box boasts a robust construction, ensuring it can withstand the rigors of your toughest projects. Crafted to last, it's built to store your cherished tools and equipment securely.</li><li>Hinged Lid: With two precision-engineered hinges, the lid opens and closes smoothly, providing easy access to your tools while keeping them safely contained when not in use. No more searching for your essentials; they'll be neatly organized and at your fingertips.</li><li>Comfortable Handle: The ergonomically designed handle ensures a comfortable and firm grip, making it easy to transport your tools to any job site or workspace. It's not only functional but also visually appealing, enhancing the overall aesthetics of your toolbox.</li><li>Customizable Fasteners: To assemble your DIY Durable Tool Box, all you need are a few standard fasteners. You'll require 2x M4x50mm screws for the handle and 4x M4x35mm screws for the hinges, which are readily available at your local hardware store. This customization allows you to choose the materials and finishes that suit your personal style and needs.</li><li>Ample Storage Space: Inside, you'll find ample storage space with customizable dividers to keep your tools neatly organized. Whether you're a professional tradesperson or a dedicated hobbyist, this toolbox is designed to accommodate your unique tool collection.</li><li>Durability and Longevity: The materials and design used in this toolbox are intended for long-term use, so you won't have to worry about wear and tear. It's a testament to my commitment to providing you with a high-quality product.</li></ol>Share Your Thoughts, I'd appreciate your ratings and reviews after you've successfully created and used this DIY Durable Tool Box. Your feedback helps me improve and inspires me to keep creating innovative designs for the 3D printing community. Your input is invaluable to me, so please share your experience with our community.Now, it's time to roll up your sleeves and embark on your next 3D printing adventure. Download this free DIY Durable Tool Box model and enjoy the satisfaction of crafting your own reliable storage solution. Say goodbye to flimsy and expensive store-bought toolboxes – build the one that perfectly suits your needs. Get started today and experience the joy of making something exceptional with your own two hands!&nbsp;For the handle 2x M4x50mm For the hinge 4x M4x35mm &nbsp;&nbsp;

Tool Box

profile 2

Brenyo

A sturdy and more thorough nozzle wiper for the X1 / P1.&nbsp;Print with PETG or ABS.&nbsp;Heatproof silicone sheet (3mm) : <a target="_blank" href="https://www.aliexpress.com/item/1005004396542611.html" rel="nofollow noopener">Link to AliExpress</a>.&nbsp;Instructions:<ol><li>Remove the stock wiper and place its screw into the slot on the Better Wipe, then screw it in slightly.</li><li>Cut a 14mm x 12mm piece of 3mm thick heatproof silicone sheet and push it into place.</li><li>Install the new wiper, ensuring that the top of the silicone is about level with the black silicone above the nozzle.</li></ol>

profile 5

profile 3

profile 6

profile 4

brackets and such

profile 2

my profiles name is too lo