IDontKerr

gustav.ferdman

If you liked this model check out my other ones. Also follow me to keep updated when I post new models, which  I do regularly.&nbsp;Update 24/4 - 2024: I have updated the print profile the that the small thread on the top should print more easily.&nbsp;A drip waterer using a standard PET-bottle as water reservoir. The amount of watering can be altered by turning the knob.&nbsp;We&#39;ve all seen the PET-bottle plant waterer&#39;s. However, this one is adjustable for the current needs of the plant instead of just keeping the entire soil wet at all times. With a small threaded knob on the side of the device the amount of water dripping out of the device can be controlled and also aimed directly at the plant so that no water is wasted, hence it will last longer between refills and work even for plants that like dry spoil, like cactuses.&nbsp;Assembly and usage:<ol><li>Insert the part called tap (small part with 3 connections) into the part called base (large part), this will take some force but is necessary for a tight seal. Look at the pictures if needed.</li><li>Take the pin (the small pointy thingy) and screw it on the tap.</li><li>Fill up a water bottle and attach your new print to it.</li><li>Stick the large pointy thing straight down into the soil and make sure it doesn&#39;t fall over by itself.</li><li>Turn the small knob until the desired amount of water drips out of the tap.</li></ol>Check out my other models if you liked this model, how about hydroponic growing baskets?<a target="_blank" href="https://makerworld.com/en/models/424718#profileId-328151" rel="nofollow noopener">https://makerworld.com/en/models/424718#profileId-328151</a>&nbsp;Please drop a like and don&#39;t forget to upload your makes!&nbsp;Update 17/4 - 2024: Added step files on the request of <a target="_blank" href="https://makerworld.com/en/@s.tochahi" rel="nofollow noopener">s.tochahi</a>.

Adjustable Drip Waterer PET-Bottle

Garden

thift88

One Piece skull with hole to be attached to the wall, I recommend printing an extra layer on the bottom

One Piece skull

One Piece

iNkosi3D

Tiny mushroom with 1mm hole for drop earrings printed in three parts so choose your colour. These actuallt turned out way better than expected and make lovly eatrings. As with all things 3D printed they are scaleable however for earring charm size I would advise against using a 0.4mm nozzel at 0.8mm layer height (I tried and they did not turn out very clever)These were printed with 0.2mm nozzel on A1 MiniBBL silk filament &nbsp;

Mushroom

Wearables

K2_Kevin

The X-Axis Cable Spring is a flexible guide/tube for the A1 mini. It will prevent the cable from sagging and support the connection to reduce wear on the X-Axis cable.&nbsp;⭐️Don&#39;t forget to Follow! Thank you so much for your Downloads, Like and BOOSTS!&nbsp;Extruder Cable Spring available <a target="_blank" href="https://makerworld.com/en/models/451525#profileId-358606" rel="nofollow noopener">here</a>: <a target="_blank" href="https://makerworld.com/en/models/451525#profileId-358606" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000452439/design/2024-05-03_5065cb4c06f08.png"></a>

A1 Mini X-Axis Cable Spring - Strain Relief

Printer Accessories

NUKDDD

Legend says that some chickens and bunnies had babies and that's where these adorable little hole-y eggs came from. People would go hunt for these eggs every spring, thus came the holiday called Easter…I made that up, it's actual about a bunny waking up after a long nap and losing the race to the tortoise and became an egg.&nbsp;Please give a 👍 if you like it, even if you don’t download it, it’ll help others discover it 😊Commercial rights available for all my designs at <a target="_blank" href="https://www.patreon.com/NUKDDD" rel="nofollow noopener">https://www.patreon.com/NUKDDD</a>&nbsp;These eggs will look great day and night by themselves or next to other decors.&nbsp;<a target="_blank" href="https://shrsl.com/4gf88" rel="nofollow noopener">Designed to fit Bambu Lab's Lamp Kit, available in the online shop.</a>&nbsp;Printed with Bambu's <a target="_blank" href="https://shrsl.com/4gfvl" rel="nofollow noopener">Basic</a> and <a target="_blank" href="https://shrsl.com/4gfae" rel="nofollow noopener">Matte PLA</a>&nbsp;No support, easy assembly, big one compatible with Bambu Lamp Kit 001 and small one for tea lights up to 40mm in diameter. Standard setting, except for the bases, they all have fuzzy skin turned on, default setting. You can support me by using my affiliate link to purchase <a target="_blank" href="https://amzn.to/3PxD8HO" rel="nofollow noopener">the LED candle</a> I purchased in my video and photos. I may earn a small commission.&nbsp;All you need is to bring your own light, nothing else is needed, like most of my designs. Check them out in my profile!&nbsp;Disclaimer: This model is part of the Creator Program, When you purchase the Lamp Kit 001 or filament through the links provided, creators may earn an affiliate commission as a reward of their work. (The creator program is currently in the trial phase. The application is not yet open to public.)

Easter Bunny Egg Lamp 

Easter

Bootjevaarder

In this type of gearbox, all the gears of the main shaft are in constant mesh with the corresponding gears of the countershaft. Two sliding dog clutches are provided on the main shaft. Gear ratios: 1.38, 1.00, 0.78, reverse 1.86 and neutral. Dimensions: 143 x 65 x 100 mm. Weight: 0.15 kg. 2-speed gearbox: <a href="https://www.printables.com/model/144943-constant-mesh-two-speed-gearbox" rel="nofollow">Constant Mesh Two Speed Gearbox by Bootjevaarder | Download free STL model | Printables.com</a> Printing The parts should be printed on a smooth build plate. If possible, avoid elephant foot. I printed the model on a PRUSA MINI, with PLA+ filament, layer height 0.15 mm. Glue with Hard Plastic Glue where necessary. Printing instructions are provided with every .stl file. Assembly Assembly in alphabetical order. Assembly instructions can be found in 10 screenshots. The gearbox can be joined to compatible 4-stroke engines Print parts “N - Sled and Engine Connection.stl”. To couple the gearbox to the engine, the “Cranked Handle” of the engine must be removed. The engine, coupling bracket and gearbox click into the Sled. <figure class="image image-style-align-center image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/194714/2023-11-22_g9r45tzkouyv.jpg"></figure>Compatible 4-stroke engines: <a href="https://www.printables.com/model/212625-4-stroke-4-valves-over-head-camshaft-engine" rel="nofollow">4 Stroke 4 Valves Over Head Camshaft Engine by Bootjevaarder | Download free STL model | Printables.com</a><a href="https://www.printables.com/model/152321-4-stroke-flathead-v-twin-engine" rel="nofollow">4 Stroke Flathead V-Twin Engine by Bootjevaarder | Download free STL model | Printables.com</a><a href="https://www.printables.com/model/135305-4-stroke-flathead-engine" rel="nofollow">4 Stroke Flathead Engine by Bootjevaarder | Download free STL model | Printables.com</a> Operation Use the cranked handle to rotate the gearbox / engine. For shifting gears, operate the Sliding Dog Clutches. To couple / uncouple the gearbox from the engine, operate the clutch lever of the "N - Engine Connection”.

Constant Mesh 3 Speed Gearbox with Reverse Gear

Educational

LayerModels

Stunning sculpture of a life sized hand in a bionic style. An eye cathing art piece that truly shows the capabilities of 3D printing. Display on a shelf or mount it to a wall using the bayonet wall mount system.<ul><li>File includes left and right hand</li><li>Part is scalable (tested up to 50%)</li><li>No support needed. </li></ul>If you like my designs you can support me by downloading other poses <a target="_blank" href="https://cults3d.com/en/design-collections/LayerModels/bionic-hand-art" rel="nofollow noopener">HERE</a>&nbsp;<a target="_blank" href="https://cults3d.com/en/design-collections/LayerModels/bionic-hand-art" rel="nofollow noopener"><img src="https://media.printables.com/media/prints/633834/rich_content/56f8342b-1017-4195-98a5-f58b66cbb36a/3d-hand-poses.jpg#%7B%22uuid%22%3A%226c97b809-922e-4648-855f-51f2e99b67ff%22%2C%22w%22%3A2000%2C%22h%22%3A2000%7D"></a>&nbsp;3D PRINTING SETTINGS&nbsp;Tested in PLA with standard print profile. Use sufficient cooling for the overhangs. Brim advised for increased adherence to the print bed.----------Subscribe to <a target="_blank" href="https://patreon.com/LayerModels" rel="nofollow noopener">my patreon</a> if you are interested in a license to sell your prints commercialyFollow me on <a target="_blank" href="https://www.instagram.com/layermodels/" rel="nofollow noopener">instagram</a> to stay up to date with my latest 3D Models

Bionic Hand art - Standard

Decor

vandragon_de

A container or cargo ship belongs to every bath tub fleet. I once drew a small and a particularly large version. The swimming characteristics are still very good even when fully loaded.&nbsp;Have fun printing :)<h2>---Have a look at EMMA, the big sister of COS---<a href="/thing:3142367" rel="nofollow"><img src="https://makerworld.bblmw.com/makerworld/draft/47361/2023-09-28_otis20gl1olj.jpg" alt="image"></a></h2><h3>See what might come next</h3>Instagram: <a target="_blank" href="https://www.instagram.com/vandragon_de" rel="nofollow noopener">https://www.instagram.com/vandragon_de</a><h2>Print Settings</h2>Notes: The infill must be printed obliquelyexample<img src="https://makerworld.bblmw.com/makerworld/draft/47361/2023-09-28_520wns3f6uyl.jpg" alt="image"><img src="https://makerworld.bblmw.com/makerworld/draft/47361/2023-09-28_d1x0j3dr9rg0.jpg" alt="image">The lower section has 35% infill, the upper 10%. For this purpose I have extended the surface layer to 6.Multicolour was made possible by changing the filaments. As always with my Prusa and Slic3r, an M600 command was simply inserted in the appropriate places.Dark red leaves layer - 0 - 9mm (Layer 0-45)Green from - 9-19.8mm (Layer 45-99)White from - 19.8mm - END (Layer 99-292)<h2>Videos</h2><figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=je_ngnnx4nU"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/je_ngnnx4nU" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=qQY5MCH6A0Q"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/qQY5MCH6A0Q" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

COS -  the Container Ship

Toys

JAV-3D

Dragonclip with hook for Sign.&nbsp;Powered by Make My Sign from MakerWorld(makerworld.com/makerlab/MakeMySign)

Dragonclip with hook and sign.

Funny

SavageLau

<h3>If you want commercial license, check out my bio and get it from Patreon. </h3>&nbsp; Back to a while ago, I was trying to make some filament sample model for my design display, Because I am having hard to to choice what type of filament to run the test. So I designed this one. And, maybe it would be fun to share with you guys, and you show me what's your crystal collection looks like. Good Deal? &nbsp; Box available here: <a target="_blank" href="https://makerworld.com/en/models/69421#profileId-73743" rel="nofollow noopener">https://makerworld.com/en/models/69421#profileId-73743</a> <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/368002/2023-11-20_5e69fb6cccba6.jpg"></figure>I add brand and color under the crystal so I can find out which roll of filament I am looking at, You can doing so on slicer or use my STEP file to make your own text on CAD software. Have fun! (That's my collection, lol) <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/368002/2023-11-20_871a2419cf37e.png"></figure> I also have attached basic types of filament on model setction, or you want to directly download the print file. I also have design box for all the crystal to sit. The slot of perfect sliding fit, looks good too I guess. <figure class="image image_resized" style="width:67.12%;"><img src="https://makerworld.bblmw.com/makerworld/draft/368002/2023-11-20_02d488083e095.jpg"></figure><figure class="image image_resized" style="width:68.62%;"><img src="https://makerworld.bblmw.com/makerworld/draft/368002/2023-11-20_efbfc9e873191.jpg"></figure>