I initially printed the body on A1 using PLA Wood and noticed overhang issues — specifically bulging lines around layer 14+. Switching to PLA Basic gave slightly better results, but the print quality between layers 14–35 was still lacking. In the end, I switched to my P1, and the box printed beautifully without any issues. I found a few potential fixes, as outlined in the Bambu Wiki - Increase the speed percentage of the Auxiliary Part Cooling Fan and Part Cooling Fan — this can be adjusted in the filament settings. For the A1, ensure the cooling fan is running at full speed. By default, PLA Wood and Basic have a max fan threshold of 80% and the layer time = 6s. Next time, I’ll likely bump this up to 100% and double-dry the PLA Wood filament beforehand. - Reduce the nozzle temperature appropriately Hopefully, this information helps other A1 users achieve a successful print. Still, it's a beautifully designed box — many thanks for sharing it with the community!

Clever project and great print. Modular features comes handy when we try to find that perfect colour match. Thanks!

Simple and elegant design. Used pla wood and pla charcoal matte from bambu. 0.16mm high quality

Beautiful addition to the kitchen. Printed without any issues using pla basic grey and 0.12mm high quality preset. Great design!

Very nice print and will definitely reprint as a gift. Thank You! Used PLA Wood and 0.12mm in High Quality