HollowS

玩具

BenniBiene

<h2>608 ball bearing</h2>

608 ball bearing

工具

Mick23

Hi, here a little model of a Benchy.It print Flat with nos supports, If the slicer says it need supports, Ignore that it need supports.&nbsp;When its printed, draw imaginaire dot lines on the benchy paint.Its between these right dotlines you need to heat with a lighter underneath, back and forth until the temperature is just above 65 degrees.&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/144958/2023-10-29_84c0142564525.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/144958/2023-10-29_2c74131012b53.jpg">&nbsp;Now you can fold it over and push on it to a corner of a table or shelf.&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/144958/2023-10-29_bad51dff6a066.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/144958/2023-10-29_e8499a47f1d43.jpg">&nbsp;When it is cool down, you can heat between the other imaginary dot lines.&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/144958/2023-10-29_67767c001d3d4.jpg">&nbsp;And repeat the previous steps&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/144958/2023-10-29_63166aad2147b.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/144958/2023-10-29_afd3c56859e46.jpg">&nbsp;If you have any problem , let me know&nbsp;Look also my cube paint https://makerworld.com/nl/models/55104#profileId-56614&nbsp;&nbsp;&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/144958/2023-11-01_8492330af006.jpg">And please if you like it , share it and print it!!!! And show me your pictures. and rate the print profile please Like it if you want and follow me for other items. Comments welcome&nbsp;I added also a print profile in mirror mode if you want

玩具

工具

艺术